/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_drawinglayer.hxx" #include #include #include #include #include #include #include #include ////////////////////////////////////////////////////////////////////////////// namespace drawinglayer { namespace primitive3d { namespace // anonymous namespace { Primitive3DSequence getLineTubeSegments( sal_uInt32 nSegments, const attribute::MaterialAttribute3D& rMaterial) { // static data for buffered tube primitives static Primitive3DSequence aLineTubeList; static sal_uInt32 nLineTubeSegments(0L); static attribute::MaterialAttribute3D aLineMaterial; // may exclusively change static data, use mutex ::osl::Mutex m_mutex; if(nSegments != nLineTubeSegments || !(rMaterial == aLineMaterial)) { nLineTubeSegments = nSegments; aLineMaterial = rMaterial; aLineTubeList = Primitive3DSequence(); } if(!aLineTubeList.hasElements() && 0L != nLineTubeSegments) { const basegfx::B3DPoint aLeft(0.0, 0.0, 0.0); const basegfx::B3DPoint aRight(1.0, 0.0, 0.0); basegfx::B3DPoint aLastLeft(0.0, 1.0, 0.0); basegfx::B3DPoint aLastRight(1.0, 1.0, 0.0); basegfx::B3DHomMatrix aRot; aRot.rotate(F_2PI / (double)nLineTubeSegments, 0.0, 0.0); aLineTubeList.realloc(nLineTubeSegments); for(sal_uInt32 a(0L); a < nLineTubeSegments; a++) { const basegfx::B3DPoint aNextLeft(aRot * aLastLeft); const basegfx::B3DPoint aNextRight(aRot * aLastRight); basegfx::B3DPolygon aNewPolygon; aNewPolygon.append(aNextLeft); aNewPolygon.setNormal(0L, basegfx::B3DVector(aNextLeft - aLeft)); aNewPolygon.append(aLastLeft); aNewPolygon.setNormal(1L, basegfx::B3DVector(aLastLeft - aLeft)); aNewPolygon.append(aLastRight); aNewPolygon.setNormal(2L, basegfx::B3DVector(aLastRight - aRight)); aNewPolygon.append(aNextRight); aNewPolygon.setNormal(3L, basegfx::B3DVector(aNextRight - aRight)); aNewPolygon.setClosed(true); const basegfx::B3DPolyPolygon aNewPolyPolygon(aNewPolygon); const Primitive3DReference xRef(new PolyPolygonMaterialPrimitive3D(aNewPolyPolygon, aLineMaterial, false)); aLineTubeList[a] = xRef; aLastLeft = aNextLeft; aLastRight = aNextRight; } } return aLineTubeList; } Primitive3DSequence getLineCapSegments( sal_uInt32 nSegments, const attribute::MaterialAttribute3D& rMaterial) { // static data for buffered tube primitives static Primitive3DSequence aLineCapList; static sal_uInt32 nLineCapSegments(0L); static attribute::MaterialAttribute3D aLineMaterial; // may exclusively change static data, use mutex ::osl::Mutex m_mutex; if(nSegments != nLineCapSegments || !(rMaterial == aLineMaterial)) { nLineCapSegments = nSegments; aLineMaterial = rMaterial; aLineCapList = Primitive3DSequence(); } if(!aLineCapList.hasElements() && 0L != nLineCapSegments) { const basegfx::B3DPoint aNull(0.0, 0.0, 0.0); basegfx::B3DPoint aLast(0.0, 1.0, 0.0); basegfx::B3DHomMatrix aRot; aRot.rotate(F_2PI / (double)nLineCapSegments, 0.0, 0.0); aLineCapList.realloc(nLineCapSegments); for(sal_uInt32 a(0L); a < nLineCapSegments; a++) { const basegfx::B3DPoint aNext(aRot * aLast); basegfx::B3DPolygon aNewPolygon; aNewPolygon.append(aLast); aNewPolygon.setNormal(0L, basegfx::B3DVector(aLast - aNull)); aNewPolygon.append(aNext); aNewPolygon.setNormal(1L, basegfx::B3DVector(aNext - aNull)); aNewPolygon.append(aNull); aNewPolygon.setNormal(2L, basegfx::B3DVector(-1.0, 0.0, 0.0)); aNewPolygon.setClosed(true); const basegfx::B3DPolyPolygon aNewPolyPolygon(aNewPolygon); const Primitive3DReference xRef(new PolyPolygonMaterialPrimitive3D(aNewPolyPolygon, aLineMaterial, false)); aLineCapList[a] = xRef; aLast = aNext; } } return aLineCapList; } Primitive3DSequence getLineJoinSegments( sal_uInt32 nSegments, const attribute::MaterialAttribute3D& rMaterial, double fAngle, double /*fDegreeStepWidth*/, double fMiterMinimumAngle, basegfx::B2DLineJoin aLineJoin) { // nSegments is for whole circle, adapt to half circle const sal_uInt32 nVerSeg(nSegments >> 1L); std::vector< BasePrimitive3D* > aResultVector; if(nVerSeg) { if(basegfx::B2DLINEJOIN_ROUND == aLineJoin) { // calculate new horizontal segments const sal_uInt32 nHorSeg((sal_uInt32)((fAngle / F_2PI) * (double)nSegments)); if(nHorSeg) { // create half-sphere const basegfx::B3DPolyPolygon aSphere(basegfx::tools::createUnitSphereFillPolyPolygon(nHorSeg, nVerSeg, true, F_PI2, -F_PI2, 0.0, fAngle)); for(sal_uInt32 a(0L); a < aSphere.count(); a++) { const basegfx::B3DPolygon aPartPolygon(aSphere.getB3DPolygon(a)); const basegfx::B3DPolyPolygon aPartPolyPolygon(aPartPolygon); BasePrimitive3D* pNew = new PolyPolygonMaterialPrimitive3D(aPartPolyPolygon, rMaterial, false); aResultVector.push_back(pNew); } } else { // fallback to bevel when there is not at least one segment hor and ver aLineJoin = basegfx::B2DLINEJOIN_BEVEL; } } if(basegfx::B2DLINEJOIN_MIDDLE == aLineJoin || basegfx::B2DLINEJOIN_BEVEL == aLineJoin || basegfx::B2DLINEJOIN_MITER == aLineJoin) { if(basegfx::B2DLINEJOIN_MITER == aLineJoin) { const double fMiterAngle(fAngle/2.0); if(fMiterAngle < fMiterMinimumAngle) { // fallback to bevel when miter's angle is too small aLineJoin = basegfx::B2DLINEJOIN_BEVEL; } } const double fInc(F_PI / (double)nVerSeg); const double fSin(sin(-fAngle)); const double fCos(cos(-fAngle)); const bool bMiter(basegfx::B2DLINEJOIN_MITER == aLineJoin); const double fMiterSin(bMiter ? sin(-(fAngle/2.0)) : 0.0); const double fMiterCos(bMiter ? cos(-(fAngle/2.0)) : 0.0); double fPos(-F_PI2); basegfx::B3DPoint aPointOnXY, aPointRotY, aNextPointOnXY, aNextPointRotY; basegfx::B3DPoint aCurrMiter, aNextMiter; basegfx::B3DPolygon aNewPolygon, aMiterPolygon; // close polygon aNewPolygon.setClosed(true); aMiterPolygon.setClosed(true); for(sal_uInt32 a(0L); a < nVerSeg; a++) { const bool bFirst(0L == a); const bool bLast(a + 1L == nVerSeg); if(bFirst || !bLast) { fPos += fInc; aNextPointOnXY = basegfx::B3DPoint( cos(fPos), sin(fPos), 0.0); aNextPointRotY = basegfx::B3DPoint( aNextPointOnXY.getX() * fCos, aNextPointOnXY.getY(), aNextPointOnXY.getX() * fSin); if(bMiter) { aNextMiter = basegfx::B3DPoint( aNextPointOnXY.getX(), aNextPointOnXY.getY(), fMiterSin * (aNextPointOnXY.getX() / fMiterCos)); } } if(bFirst) { aNewPolygon.clear(); if(bMiter) { aNewPolygon.append(basegfx::B3DPoint(0.0, -1.0, 0.0)); aNewPolygon.append(aNextPointOnXY); aNewPolygon.append(aNextMiter); aMiterPolygon.clear(); aMiterPolygon.append(basegfx::B3DPoint(0.0, -1.0, 0.0)); aMiterPolygon.append(aNextMiter); aMiterPolygon.append(aNextPointRotY); } else { aNewPolygon.append(basegfx::B3DPoint(0.0, -1.0, 0.0)); aNewPolygon.append(aNextPointOnXY); aNewPolygon.append(aNextPointRotY); } } else if(bLast) { aNewPolygon.clear(); if(bMiter) { aNewPolygon.append(basegfx::B3DPoint(0.0, 1.0, 0.0)); aNewPolygon.append(aCurrMiter); aNewPolygon.append(aPointOnXY); aMiterPolygon.clear(); aMiterPolygon.append(basegfx::B3DPoint(0.0, 1.0, 0.0)); aMiterPolygon.append(aPointRotY); aMiterPolygon.append(aCurrMiter); } else { aNewPolygon.append(basegfx::B3DPoint(0.0, 1.0, 0.0)); aNewPolygon.append(aPointRotY); aNewPolygon.append(aPointOnXY); } } else { aNewPolygon.clear(); if(bMiter) { aNewPolygon.append(aPointOnXY); aNewPolygon.append(aNextPointOnXY); aNewPolygon.append(aNextMiter); aNewPolygon.append(aCurrMiter); aMiterPolygon.clear(); aMiterPolygon.append(aCurrMiter); aMiterPolygon.append(aNextMiter); aMiterPolygon.append(aNextPointRotY); aMiterPolygon.append(aPointRotY); } else { aNewPolygon.append(aPointRotY); aNewPolygon.append(aPointOnXY); aNewPolygon.append(aNextPointOnXY); aNewPolygon.append(aNextPointRotY); } } // set normals for(sal_uInt32 b(0L); b < aNewPolygon.count(); b++) { aNewPolygon.setNormal(b, basegfx::B3DVector(aNewPolygon.getB3DPoint(b))); } // create primitive if(aNewPolygon.count()) { const basegfx::B3DPolyPolygon aNewPolyPolygon(aNewPolygon); BasePrimitive3D* pNew = new PolyPolygonMaterialPrimitive3D(aNewPolyPolygon, rMaterial, false); aResultVector.push_back(pNew); } if(bMiter && aMiterPolygon.count()) { // set normals for(sal_uInt32 c(0L); c < aMiterPolygon.count(); c++) { aMiterPolygon.setNormal(c, basegfx::B3DVector(aMiterPolygon.getB3DPoint(c))); } // create primitive const basegfx::B3DPolyPolygon aMiterPolyPolygon(aMiterPolygon); BasePrimitive3D* pNew = new PolyPolygonMaterialPrimitive3D(aMiterPolyPolygon, rMaterial, false); aResultVector.push_back(pNew); } // prepare next step if(bFirst || !bLast) { aPointOnXY = aNextPointOnXY; aPointRotY = aNextPointRotY; if(bMiter) { aCurrMiter = aNextMiter; } } } } } Primitive3DSequence aRetval(aResultVector.size()); for(sal_uInt32 a(0L); a < aResultVector.size(); a++) { aRetval[a] = Primitive3DReference(aResultVector[a]); } return aRetval; } basegfx::B3DHomMatrix getRotationFromVector(const basegfx::B3DVector& rVector) { // build transformation from unit vector to vector basegfx::B3DHomMatrix aRetval; // get applied rotations from angles in XY and in XZ (cartesian) const double fRotInXY(atan2(rVector.getY(), rVector.getXZLength())); const double fRotInXZ(atan2(-rVector.getZ(), rVector.getX())); // apply rotations. Rot around Z needs to be done first, so apply in two steps aRetval.rotate(0.0, 0.0, fRotInXY); aRetval.rotate(0.0, fRotInXZ, 0.0); return aRetval; } } // end of anonymous namespace } // end of namespace primitive3d } // end of namespace drawinglayer ////////////////////////////////////////////////////////////////////////////// using namespace com::sun::star; ////////////////////////////////////////////////////////////////////////////// namespace drawinglayer { namespace primitive3d { Primitive3DSequence PolygonTubePrimitive3D::impCreate3DDecomposition(const geometry::ViewInformation3D& /*rViewInformation*/) const { const sal_uInt32 nPointCount(getB3DPolygon().count()); std::vector< BasePrimitive3D* > aResultVector; if(0L != nPointCount) { if(basegfx::fTools::more(getRadius(), 0.0)) { const attribute::MaterialAttribute3D aMaterial(getBColor()); static sal_uInt32 nSegments(8L); // default for 3d line segments, for more quality just raise this value (in even steps) const bool bClosed(getB3DPolygon().isClosed()); const bool bNoLineJoin(basegfx::B2DLINEJOIN_NONE == getLineJoin()); const sal_uInt32 nLoopCount(bClosed ? nPointCount : nPointCount - 1L); basegfx::B3DPoint aLast(getB3DPolygon().getB3DPoint(nPointCount - 1L)); basegfx::B3DPoint aCurr(getB3DPolygon().getB3DPoint(0L)); for(sal_uInt32 a(0L); a < nLoopCount; a++) { // get next data const basegfx::B3DPoint aNext(getB3DPolygon().getB3DPoint((a + 1L) % nPointCount)); const basegfx::B3DVector aForw(aNext - aCurr); const double fForwLen(aForw.getLength()); if(basegfx::fTools::more(fForwLen, 0.0)) { // get rotation from vector, this describes rotation from (1, 0, 0) to aForw basegfx::B3DHomMatrix aRotVector(getRotationFromVector(aForw)); // create default transformation with scale and rotate basegfx::B3DHomMatrix aVectorTrans; aVectorTrans.scale(fForwLen, getRadius(), getRadius()); aVectorTrans *= aRotVector; aVectorTrans.translate(aCurr.getX(), aCurr.getY(), aCurr.getZ()); if(bNoLineJoin || (!bClosed && !a)) { // line start edge, build transformed primitiveVector3D TransformPrimitive3D* pNewTransformedA = new TransformPrimitive3D(aVectorTrans, getLineCapSegments(nSegments, aMaterial)); aResultVector.push_back(pNewTransformedA); } else { const basegfx::B3DVector aBack(aCurr - aLast); const double fCross(basegfx::cross(aBack, aForw).getLength()); if(!basegfx::fTools::equalZero(fCross)) { // line connect non-parallel, aBack, aForw, use getLineJoin() const double fAngle(acos(aBack.scalar(aForw) / (fForwLen * aBack.getLength()))); // 0.0 .. F_PI2 Primitive3DSequence aNewList(getLineJoinSegments(nSegments, aMaterial, fAngle, getDegreeStepWidth(), getMiterMinimumAngle(), getLineJoin())); // calculate transformation. First, get angle in YZ between nForw projected on (1, 0, 0) and nBack basegfx::B3DHomMatrix aInvRotVector(aRotVector); aInvRotVector.invert(); basegfx::B3DVector aTransBack(aInvRotVector * aBack); const double fRotInYZ(atan2(aTransBack.getY(), aTransBack.getZ())); // create trans by rotating unit sphere with angle 90 degrees around Y, then 180-fRot in X. // Also apply usual scaling and translation basegfx::B3DHomMatrix aSphereTrans; aSphereTrans.rotate(0.0, F_PI2, 0.0); aSphereTrans.rotate(F_PI - fRotInYZ, 0.0, 0.0); aSphereTrans *= aRotVector; aSphereTrans.scale(getRadius(), getRadius(), getRadius()); aSphereTrans.translate(aCurr.getX(), aCurr.getY(), aCurr.getZ()); // line start edge, build transformed primitiveVector3D TransformPrimitive3D* pNewTransformedB = new TransformPrimitive3D(aSphereTrans, aNewList); aResultVector.push_back(pNewTransformedB); } } // create line segments, build transformed primitiveVector3D TransformPrimitive3D* pNewTransformedC = new TransformPrimitive3D(aVectorTrans, getLineTubeSegments(nSegments, aMaterial)); aResultVector.push_back(pNewTransformedC); if(bNoLineJoin || (!bClosed && ((a + 1L) == nLoopCount))) { // line end edge, first rotate (mirror) and translate, then use use aRotVector basegfx::B3DHomMatrix aBackTrans; aBackTrans.rotate(0.0, F_PI, 0.0); aBackTrans.translate(1.0, 0.0, 0.0); aBackTrans.scale(fForwLen, getRadius(), getRadius()); aBackTrans *= aRotVector; aBackTrans.translate(aCurr.getX(), aCurr.getY(), aCurr.getZ()); // line end edge, build transformed primitiveVector3D TransformPrimitive3D* pNewTransformedD = new TransformPrimitive3D(aBackTrans, getLineCapSegments(nSegments, aMaterial)); aResultVector.push_back(pNewTransformedD); } } // prepare next loop step aLast = aCurr; aCurr = aNext; } } else { // create hairline PolygonHairlinePrimitive3D* pNew = new PolygonHairlinePrimitive3D(getB3DPolygon(), getBColor()); aResultVector.push_back(pNew); } } // prepare return value Primitive3DSequence aRetval(aResultVector.size()); for(sal_uInt32 a(0L); a < aResultVector.size(); a++) { aRetval[a] = Primitive3DReference(aResultVector[a]); } return aRetval; } PolygonTubePrimitive3D::PolygonTubePrimitive3D( const basegfx::B3DPolygon& rPolygon, const basegfx::BColor& rBColor, double fRadius, basegfx::B2DLineJoin aLineJoin, double fDegreeStepWidth, double fMiterMinimumAngle) : PolygonHairlinePrimitive3D(rPolygon, rBColor), maLast3DDecomposition(), mfRadius(fRadius), mfDegreeStepWidth(fDegreeStepWidth), mfMiterMinimumAngle(fMiterMinimumAngle), maLineJoin(aLineJoin) { } bool PolygonTubePrimitive3D::operator==(const BasePrimitive3D& rPrimitive) const { if(PolygonHairlinePrimitive3D::operator==(rPrimitive)) { const PolygonTubePrimitive3D& rCompare = (PolygonTubePrimitive3D&)rPrimitive; return (getRadius() == rCompare.getRadius() && getDegreeStepWidth() == rCompare.getDegreeStepWidth() && getMiterMinimumAngle() == rCompare.getMiterMinimumAngle() && getLineJoin() == rCompare.getLineJoin()); } return false; } Primitive3DSequence PolygonTubePrimitive3D::get3DDecomposition(const geometry::ViewInformation3D& rViewInformation) const { ::osl::MutexGuard aGuard( m_aMutex ); if(!getLast3DDecomposition().hasElements()) { const Primitive3DSequence aNewSequence(impCreate3DDecomposition(rViewInformation)); const_cast< PolygonTubePrimitive3D* >(this)->setLast3DDecomposition(aNewSequence); } return getLast3DDecomposition(); } // provide unique ID ImplPrimitrive3DIDBlock(PolygonTubePrimitive3D, PRIMITIVE3D_ID_POLYGONTUBEPRIMITIVE3D) } // end of namespace primitive3d } // end of namespace drawinglayer ////////////////////////////////////////////////////////////////////////////// // eof