/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ #include #include #include #include #include #include "padialog.hrc" #include "fontentry.hxx" #include "helper.hxx" #include "padialog.hxx" #include "adddlg.hxx" #include "prtsetup.hxx" #include "vcl/msgbox.hxx" #include "vcl/print.hxx" #include "vcl/gradient.hxx" #include "vcl/bitmap.hxx" #include "vcl/lineinfo.hxx" #include "vcl/svapp.hxx" #include "vcl/event.hxx" #include "vcl/printerinfomanager.hxx" #include "tools/stream.hxx" #include "tools/color.hxx" #include "osl/file.hxx" #include "rtl/ustrbuf.hxx" #include "unotools/localedatawrapper.hxx" #include "unotools/configitem.hxx" #include "unotools/configmgr.hxx" #include "com/sun/star/awt/Size.hpp" using namespace psp; using namespace rtl; using namespace padmin; using namespace osl; using namespace com::sun::star; using namespace com::sun::star::uno; using namespace com::sun::star::beans; PADialog* PADialog::Create( Window* pParent, sal_Bool bAdmin ) { return new PADialog( pParent, bAdmin ); } PADialog::PADialog( Window* pParent, sal_Bool /*bAdmin*/ ) : ModalDialog( pParent, PaResId( RID_PADIALOG ) ), m_aDevicesLB( this, PaResId( RID_PA_LB_DEV ) ), m_aConfPB( this, PaResId( RID_PA_BTN_CONF ) ), m_aRenamePB( this, PaResId( RID_PA_BTN_RENAME ) ), m_aStdPB( this, PaResId( RID_PA_BTN_STD ) ), m_aRemPB( this, PaResId( RID_PA_BTN_DEL ) ), m_aTestPagePB( this, PaResId( RID_PA_TESTPAGE ) ), m_aPrintersFL( this, PaResId( RID_PA_FL_PRINTERS ) ), m_aDriverTxt( this, PaResId( RID_PA_TXT_DRIVER ) ), m_aDriver( this, PaResId( RID_PA_TXT_DRIVER_STRING ) ), m_aLocationTxt( this, PaResId( RID_PA_TXT_LOCATION ) ), m_aLocation( this, PaResId( RID_PA_TXT_LOCATION_STRING ) ), m_aCommandTxt( this, PaResId( RID_PA_TXT_COMMAND ) ), m_aCommand( this, PaResId( RID_PA_TXT_COMMAND_STRING ) ), m_aCommentTxt( this, PaResId( RID_PA_TXT_COMMENT ) ), m_aComment( this, PaResId( RID_PA_TXT_COMMENT_STRING ) ), m_aCUPSFL( this, PaResId( RID_PA_FL_CUPSUSAGE ) ), m_aCUPSCB( this, PaResId( RID_PA_CB_CUPSUSAGE ) ), m_aSepButtonFL( this, PaResId( RID_PA_FL_SEPBUTTON ) ), m_aAddPB( this, PaResId( RID_PA_BTN_ADD ) ), m_aFontsPB( this, PaResId( RID_PA_BTN_FONTS ) ), m_aCancelButton( this, PaResId( RID_PA_BTN_CANCEL ) ), m_aDefPrt( PaResId( RID_PA_STR_DEFPRT ) ), m_aRenameStr( PaResId( RID_PA_STR_RENAME ) ), m_rPIManager( PrinterInfoManager::get() ) { FreeResource(); updateSettings(); Init(); } void PADialog::updateSettings() { if( ! GetSettings().GetStyleSettings().GetHighContrastMode() ) { m_aPrinterImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_PRINTER ) ) ); m_aFaxImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_FAX ) ) ); m_aPdfImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_PDF ) ) ); } else { m_aPrinterImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_PRINTER_HC ) ) ); m_aFaxImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_FAX_HC ) ) ); m_aPdfImg = Image( BitmapEx( PaResId( RID_BMP_SMALL_PDF_HC ) ) ); } } void PADialog::Init() { // #i79787# initially ensure printer discovery has ended m_rPIManager.checkPrintersChanged( true ); m_aCUPSCB.Check( m_rPIManager.isCUPSDisabled() ); UpdateDevice(); UpdateText(); m_aRemPB.Enable( sal_False ); m_aDevicesLB.SetDoubleClickHdl( LINK( this, PADialog, DoubleClickHdl ) ); m_aDevicesLB.SetSelectHdl( LINK( this, PADialog, SelectHdl ) ); m_aStdPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aRemPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aConfPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aRenamePB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aTestPagePB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aFontsPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aAddPB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); m_aDevicesLB.setDelPressedLink( LINK( this, PADialog, DelPressedHdl ) ); m_aCUPSCB.SetClickHdl( LINK( this, PADialog, ClickBtnHdl ) ); ::psp::PrintFontManager& rFontManager( ::psp::PrintFontManager::get() ); if( ! rFontManager.checkImportPossible() ) m_aFontsPB.Enable( sal_False ); if( rFontManager.hasFontconfig() ) { m_aFontsPB.Enable( sal_False ); m_aFontsPB.Show( sal_False ); } // at this point no actual changes will be written // but the write will have checked whether any writeable config exists if( ! m_rPIManager.writePrinterConfig() ) { m_aAddPB.Enable( sal_False ); m_aRemPB.Enable( sal_False ); m_aConfPB.Enable( sal_False ); m_aRenamePB.Enable( sal_False ); m_aStdPB.Enable( sal_False ); m_aCUPSCB.Enable( sal_False ); ErrorBox aBox( GetParent(), WB_OK | WB_DEF_OK, String( PaResId( RID_ERR_NOWRITE ) ) ); aBox.Execute(); } } PADialog::~PADialog() { m_rPIManager.writePrinterConfig(); freePadminRC(); } long PADialog::Notify( NotifyEvent& rEv ) { if( IsVisible() && (rEv.GetType() == EVENT_GETFOCUS || rEv.GetType() == EVENT_LOSEFOCUS ) ) { if( m_rPIManager.checkPrintersChanged( true ) ) { String aSelectEntry = m_aDevicesLB.GetSelectEntry(); UpdateDevice(); UpdateText(); m_aDevicesLB.SelectEntry( aSelectEntry ); } } return ModalDialog::Notify( rEv ); } void PADialog::DataChanged( const DataChangedEvent& rEv ) { ModalDialog::DataChanged( rEv ); if( (rEv.GetType() == DATACHANGED_SETTINGS) && (rEv.GetFlags() & SETTINGS_STYLE) ) { updateSettings(); // push the new images into the listbox UpdateDevice(); } } String PADialog::getSelectedDevice() { int nPos = m_aDevicesLB.GetSelectEntryPos(); int nLen = (int)(sal_IntPtr)m_aDevicesLB.GetEntryData( nPos ); return m_aDevicesLB.GetEntry( nPos ).Copy( 0, nLen ); } IMPL_LINK( PADialog, DelPressedHdl, ListBox*, pBox ) { if( pBox == &m_aDevicesLB && m_aRemPB.IsEnabled() ) ClickBtnHdl( &m_aRemPB ); return 0; } IMPL_LINK( PADialog, ClickBtnHdl, PushButton*, pButton ) { if( pButton == &m_aStdPB ) UpdateDefPrt(); else if( pButton == &m_aRemPB && AreYouSure( this, RID_QUERY_REMOVEPRINTER ) ) RemDevice(); else if( pButton == &m_aConfPB ) ConfigureDevice(); else if( pButton == &m_aRenamePB ) RenameDevice(); else if( pButton == &m_aTestPagePB ) PrintTestPage(); else if( pButton == &m_aAddPB ) AddDevice(); else if( pButton == &m_aFontsPB ) { FontNameDlg aDialog( this ); aDialog.Execute(); } else if( static_cast(pButton) == &m_aCUPSCB ) { m_rPIManager.setCUPSDisabled( m_aCUPSCB.IsChecked() ); UpdateDevice(); UpdateText(); } return 0; } IMPL_LINK( PADialog, DoubleClickHdl, ListBox*, pListBox ) { if( pListBox == &m_aDevicesLB ) UpdateDefPrt(); return 0; } IMPL_LINK( PADialog, SelectHdl, ListBox*, pListBox ) { if( pListBox == &m_aDevicesLB ) { String sSelect = getSelectedDevice(); String sDefPrt = m_rPIManager.getDefaultPrinter(); if( sDefPrt == sSelect || ! m_rPIManager.removePrinter( sSelect, true ) ) m_aRemPB.Enable( sal_False ); else m_aRemPB.Enable( sal_True ); UpdateText(); } return 0; } void PADialog::UpdateDefPrt() { m_rPIManager.setDefaultPrinter( getSelectedDevice() ); UpdateDevice(); UpdateText(); if( m_aRemPB.HasFocus() ) m_aDevicesLB.GetFocus(); m_aRemPB.Enable( sal_False ); } void PADialog::UpdateText() { OUString aDev( getSelectedDevice() ); if( aDev.getLength() ) { const PrinterInfo& rInfo = m_rPIManager.getPrinterInfo( aDev ); String aDriver( rInfo.m_aPrinterName ); aDriver.AppendAscii( " (" ); aDriver += String( rInfo.m_aDriverName ); aDriver.Append( ')' ); m_aDriver.SetText( aDriver ); m_aCommand.SetText( rInfo.m_aCommand ); m_aComment.SetText( rInfo.m_aComment ); m_aLocation.SetText( rInfo.m_aLocation ); } else // nothing selected { String aEmpty; m_aDriver.SetText( aEmpty ); m_aCommand.SetText( aEmpty ); m_aComment.SetText( aEmpty ); m_aLocation.SetText( aEmpty ); } } static Point project( const Point& rPoint ) { const double angle_x = M_PI / 6.0; const double angle_z = M_PI / 6.0; // transform planar coordinates to 3d double x = rPoint.X(); double y = rPoint.Y(); //double z = 0; // rotate around X axis double x1 = x; double y1 = y * cos( angle_x ); double z1 = y * sin( angle_x ); // rotate around Z axis double x2 = x1 * cos( angle_z ) + y1 * sin( angle_z ); //double y2 = y1 * cos( angle_z ) - x1 * sin( angle_z ); double z2 = z1; return Point( (sal_Int32)x2, (sal_Int32)z2 ); } static Color approachColor( const Color& rFrom, const Color& rTo ) { Color aColor; sal_uInt8 nDiff; // approach red if( rFrom.GetRed() < rTo.GetRed() ) { nDiff = rTo.GetRed() - rFrom.GetRed(); aColor.SetRed( rFrom.GetRed() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetRed() > rTo.GetRed() ) { nDiff = rFrom.GetRed() - rTo.GetRed(); aColor.SetRed( rFrom.GetRed() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetRed( rFrom.GetRed() ); // approach Green if( rFrom.GetGreen() < rTo.GetGreen() ) { nDiff = rTo.GetGreen() - rFrom.GetGreen(); aColor.SetGreen( rFrom.GetGreen() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetGreen() > rTo.GetGreen() ) { nDiff = rFrom.GetGreen() - rTo.GetGreen(); aColor.SetGreen( rFrom.GetGreen() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetGreen( rFrom.GetGreen() ); // approach blue if( rFrom.GetBlue() < rTo.GetBlue() ) { nDiff = rTo.GetBlue() - rFrom.GetBlue(); aColor.SetBlue( rFrom.GetBlue() + ( nDiff < 10 ? nDiff : 10 ) ); } else if( rFrom.GetBlue() > rTo.GetBlue() ) { nDiff = rFrom.GetBlue() - rTo.GetBlue(); aColor.SetBlue( rFrom.GetBlue() - ( nDiff < 10 ? nDiff : 10 ) ); } else aColor.SetBlue( rFrom.GetBlue() ); return aColor; } class SpaPrinterController : public vcl::PrinterController { public: SpaPrinterController( const boost::shared_ptr& i_pPrinter ) : vcl::PrinterController( i_pPrinter ) {} virtual ~SpaPrinterController() {} virtual int getPageCount() const { return 1; } virtual Sequence< PropertyValue > getPageParameters( int i_nPage ) const; virtual void printPage( int i_nPage ) const; virtual void jobFinished( com::sun::star::view::PrintableState ); }; Sequence< PropertyValue > SpaPrinterController::getPageParameters( int ) const { Sequence< PropertyValue > aRet( 1 ); Size aPageSize( getPrinter()->GetPaperSizePixel() ); aPageSize = getPrinter()->PixelToLogic( aPageSize, MapMode( MAP_100TH_MM ) ); awt::Size aSize; aSize.Width = aPageSize.Width(); aSize.Height = aPageSize.Height(); aRet[0].Value = makeAny(aSize); return aRet; } void SpaPrinterController::printPage( int ) const { const double DELTA = 5.0; boost::shared_ptr pPrinter( getPrinter() ); PrinterInfo aInfo( psp::PrinterInfoManager::get().getPrinterInfo( pPrinter->GetName() ) ); const PPDParser* pPrintParser = aInfo.m_pParser; MapMode aMapMode( MAP_100TH_MM ); Bitmap aButterfly( PaResId( RID_BUTTERFLY ) ); pPrinter->SetMapMode( aMapMode ); Any aRet = utl::ConfigManager::GetDirectConfigProperty( utl::ConfigManager::PRODUCTNAME ); OUString aJobName; aRet >>= aJobName; aJobName = aJobName + OUString( RTL_CONSTASCII_USTRINGPARAM( " Testpage" ) ); Size aPaperSize=pPrinter->GetOutputSize(); Point aCenter( aPaperSize.Width()/2-300, aPaperSize.Height() - aPaperSize.Width()/2 ); Point aP1( aPaperSize.Width()/48, 0), aP2( aPaperSize.Width()/40, 0 ), aPoint; pPrinter->DrawRect( Rectangle( Point( 0,0 ), aPaperSize ) ); pPrinter->DrawRect( Rectangle( Point( 100,100 ), Size( aPaperSize.Width()-200, aPaperSize.Height()-200 ) ) ); pPrinter->DrawRect( Rectangle( Point( 200,200 ), Size( aPaperSize.Width()-400, aPaperSize.Height()-400 ) ) ); pPrinter->DrawRect( Rectangle( Point( 300,300 ), Size( aPaperSize.Width()-600, aPaperSize.Height()-600 ) ) ); Font aFont( String( RTL_CONSTASCII_USTRINGPARAM( "Courier" ) ), Size( 0, 400 ) ); aFont.SetWeight( WEIGHT_NORMAL ); aFont.SetItalic( ITALIC_NONE ); pPrinter->SetFont( aFont ); OUStringBuffer aPrintText(1024); long nWidth = 0, nMaxWidth = 0; String aToken; static const struct { const char* const pDirect; sal_uInt16 nResId; } aResIds[] = { { NULL, RID_TXT_TESTPAGE_NAME }, { NULL, RID_TXT_TESTPAGE_MODEL }, { "PPD", 0 }, { NULL, RID_TXT_TESTPAGE_QUEUE }, { NULL, RID_TXT_TESTPAGE_COMMENT }, { NULL, RID_TXT_TESTPAGE_DATE }, { NULL, RID_TXT_TESTPAGE_TIME } }; for( unsigned int i = 0; i < sizeof(aResIds)/sizeof(aResIds[0]); i++ ) { if( aResIds[i].pDirect ) aToken = String::CreateFromAscii( aResIds[i].pDirect ); else aToken = String( PaResId( aResIds[i].nResId ) ); nMaxWidth = ( nWidth = pPrinter->GetTextWidth( aToken ) ) > nMaxWidth ? nWidth : nMaxWidth; aPrintText.append( aToken ); aPrintText.append( (sal_Unicode)'\n' ); }; pPrinter->DrawText( Rectangle( Point( 1000, 1000 ), Size( aPaperSize.Width() - 2000, aPaperSize.Height() - 4000 ) ), aPrintText.makeStringAndClear(), TEXT_DRAW_MULTILINE ); AllSettings aSettings( Application::GetSettings() ); const LocaleDataWrapper& rLocaleWrapper( aSettings.GetLocaleDataWrapper() ); aPrintText.appendAscii( ": " ); aPrintText.append( pPrinter->GetName() ); aPrintText.appendAscii( "\n: " ); if( pPrintParser ) aPrintText.append( pPrintParser->getPrinterName() ); aPrintText.appendAscii( "\n: " ); INetURLObject aDriverPath( pPrintParser ? pPrintParser->getFilename() : String( RTL_CONSTASCII_USTRINGPARAM( "" ) ), INET_PROT_FILE, INetURLObject::ENCODE_ALL ); aPrintText.append( aDriverPath.GetName() ); aPrintText.appendAscii( "\n: " ); aPrintText.append( aInfo.m_aCommand ); aPrintText.appendAscii( "\n: " ); aPrintText.append( aInfo.m_aComment ); aPrintText.appendAscii( "\n: " ); aPrintText.append( rLocaleWrapper.getDate( Date() ) ); aPrintText.appendAscii( "\n: " ); aPrintText.append( rLocaleWrapper.getTime( Time() ) ); pPrinter->DrawText( Rectangle( Point( 1100 + nMaxWidth, 1000 ), Size( aPaperSize.Width() - 2100 - nMaxWidth, aPaperSize.Height() - 4000 ) ), aPrintText.makeStringAndClear(), TEXT_DRAW_MULTILINE ); pPrinter->DrawBitmap( Point( aPaperSize.Width() - 4000, 1000 ), Size( 3000,3000 ), aButterfly ); pPrinter->SetFillColor(); pPrinter->DrawRect( Rectangle( Point( aPaperSize.Width() - 4000, 1000 ), Size( 3000,3000 ) ) ); Color aWhite( 0xff, 0xff, 0xff ); Color aBlack( 0, 0, 0 ); Color aLightRed( 0xff, 0, 0 ); Color aDarkRed( 0x40, 0, 0 ); Color aLightBlue( 0, 0, 0xff ); Color aDarkBlue( 0,0,0x40 ); Color aLightGreen( 0, 0xff, 0 ); Color aDarkGreen( 0, 0x40, 0 ); Gradient aGradient( GRADIENT_LINEAR, aBlack, aWhite ); aGradient.SetAngle( 900 ); pPrinter->DrawGradient( Rectangle( Point( 1000, 5500 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkRed ); aGradient.SetEndColor( aLightBlue ); pPrinter->DrawGradient( Rectangle( Point( 1000, 6300 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkBlue ); aGradient.SetEndColor( aLightGreen ); pPrinter->DrawGradient( Rectangle( Point( 1000, 7100 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); aGradient.SetStartColor( aDarkGreen ); aGradient.SetEndColor( aLightRed ); pPrinter->DrawGradient( Rectangle( Point( 1000, 7900 ), Size( aPaperSize.Width() - 2000, 500 ) ), aGradient ); LineInfo aLineInfo( LINE_SOLID, 200 ); double sind = sin( DELTA*M_PI/180.0 ); double cosd = cos( DELTA*M_PI/180.0 ); double factor = 1 + (DELTA/1000.0); int n=0; Color aLineColor( 0, 0, 0 ); Color aApproachColor( 0, 0, 200 ); while ( aP2.X() < aCenter.X() && n++ < 680 ) { aLineInfo.SetWidth( n/3 ); aLineColor = approachColor( aLineColor, aApproachColor ); pPrinter->SetLineColor( aLineColor ); // switch aproach color if( aApproachColor.IsRGBEqual( aLineColor ) ) { if( aApproachColor.GetRed() ) aApproachColor = Color( 0, 0, 200 ); else if( aApproachColor.GetGreen() ) aApproachColor = Color( 200, 0, 0 ); else aApproachColor = Color( 0, 200, 0 ); } pPrinter->DrawLine( project( aP1 ) + aCenter, project( aP2 ) + aCenter, aLineInfo ); aPoint.X() = (int)((((double)aP1.X())*cosd - ((double)aP1.Y())*sind)*factor); aPoint.Y() = (int)((((double)aP1.Y())*cosd + ((double)aP1.X())*sind)*factor); aP1 = aPoint; aPoint.X() = (int)((((double)aP2.X())*cosd - ((double)aP2.Y())*sind)*factor); aPoint.Y() = (int)((((double)aP2.Y())*cosd + ((double)aP2.X())*sind)*factor); aP2 = aPoint; } #if (OSL_DEBUG_LEVEL > 1) || defined DBG_UTIL fprintf( stderr, "%d lines\n",n ); #endif } void SpaPrinterController::jobFinished( com::sun::star::view::PrintableState ) { String aInfoString( PaResId( RID_PA_TXT_TESTPAGE_PRINTED ) ); InfoBox aInfoBox( NULL, aInfoString ); aInfoBox.SetText( String( PaResId( RID_BXT_TESTPAGE ) ) ); aInfoBox.Execute(); } void PADialog::PrintTestPage() { String sPrinter( getSelectedDevice() ); boost::shared_ptr pPrinter( new Printer( sPrinter ) ); if( pPrinter->GetName() != sPrinter ) { String aString( PaResId( RID_ERR_NOPRINTER ) ); aString.SearchAndReplaceAscii( "%s", sPrinter ); ErrorBox aErrorBox( this, WB_OK | WB_DEF_OK, aString ); aErrorBox.SetText( String( PaResId( RID_BXT_ENVIRONMENT ) ) ); aErrorBox.Execute(); return; } boost::shared_ptr pController( new SpaPrinterController( pPrinter ) ); JobSetup aJobSetup( pPrinter->GetJobSetup() ); aJobSetup.SetValue( String( RTL_CONSTASCII_USTRINGPARAM( "IsQuickJob" ) ), String( RTL_CONSTASCII_USTRINGPARAM( "true" ) ) ); Printer::PrintJob( pController, aJobSetup ); } void PADialog::AddDevice() { AddPrinterDialog aDlg( this ); if( aDlg.Execute() ) UpdateDevice(); } void PADialog::RemDevice() { String aPrinter( getSelectedDevice() ); String aDefPrinter( m_rPIManager.getDefaultPrinter() ); // do not remove the default printer if( aPrinter.Equals( aDefPrinter ) ) return; if( ! m_rPIManager.removePrinter( aPrinter ) ) { String aText( PaResId( RID_ERR_PRINTERNOTREMOVEABLE ) ); aText.SearchAndReplace( String( RTL_CONSTASCII_USTRINGPARAM( "%s" ) ), aPrinter ); ErrorBox aBox( this, WB_OK | WB_DEF_OK, aText ); aBox.Execute(); return; } m_aPrinters.remove( aPrinter ); m_aDevicesLB.RemoveEntry( m_aDevicesLB.GetSelectEntryPos() ); for( int i=0; i < m_aDevicesLB.GetEntryCount(); i++ ) { if( m_aDevicesLB.GetEntry( i ).CompareTo( aDefPrinter, aDefPrinter.Len() ) == COMPARE_EQUAL ) { m_aDevicesLB.SelectEntryPos( i, sal_True ); UpdateText(); break; } } m_aDevicesLB.GetFocus(); if( m_aDevicesLB.GetEntryCount() < 2 ) m_aRemPB.Enable( sal_False ); } void PADialog::ConfigureDevice() { String aPrinter( getSelectedDevice() ); if( ! aPrinter.Len() ) return; PrinterInfo aInfo( m_rPIManager.getPrinterInfo( aPrinter ) ); RTSDialog aDialog( aInfo, aPrinter, true, this ); if( aDialog.Execute() ) m_rPIManager.changePrinterInfo( aPrinter, aDialog.getSetup() ); UpdateText(); } void PADialog::RenameDevice() { String aPrinter( getSelectedDevice() ); OUString aOldPrinter( aPrinter ); if( ! aPrinter.Len() ) return; String aTmpString( PaResId( RID_QRY_PRTNAME ) ); QueryString aQuery( this, aTmpString, aPrinter ); aQuery.SetText( m_aRenameStr ); aQuery.Execute(); if( aPrinter.Len() ) { PrinterInfo aInfo( m_rPIManager.getPrinterInfo( aOldPrinter ) ); aInfo.m_aPrinterName = aPrinter; if( m_rPIManager.addPrinter( aPrinter, aInfo.m_aDriverName ) ) { bool bWasDefault = m_rPIManager.getDefaultPrinter() == aOldPrinter; m_aPrinters.push_back( aPrinter ); if( m_rPIManager.removePrinter( aOldPrinter ) ) m_aPrinters.remove( aOldPrinter ); m_rPIManager.changePrinterInfo( aPrinter, aInfo ); if( bWasDefault ) { m_rPIManager.setDefaultPrinter( aPrinter ); UpdateDefPrt(); } UpdateDevice(); } } } void PADialog::UpdateDevice() { m_aDevicesLB.Clear(); m_rPIManager.listPrinters( m_aPrinters ); ::std::list< OUString >::iterator it; for( it = m_aPrinters.begin(); it != m_aPrinters.end(); ++it ) { const PrinterInfo& rInfo( m_rPIManager.getPrinterInfo( *it ) ); sal_Int32 nIndex = 0; bool bAutoQueue = false; bool bFax = false; bool bPdf = false; while( nIndex != -1 && ! bAutoQueue ) { OUString aToken( rInfo.m_aFeatures.getToken( 0, ',', nIndex ) ); if( aToken.getLength() ) { if( aToken.compareToAscii( "autoqueue" ) == 0 ) bAutoQueue = true; else if( aToken.compareToAscii( "pdf=", 4 ) == 0 ) bPdf = true; else if( aToken.compareToAscii( "fax", 3 ) == 0 ) bFax = true; } } if( bAutoQueue ) continue; String aEntry( *it ); if( *it == m_rPIManager.getDefaultPrinter() ) { aEntry.AppendAscii( " (" ); aEntry += m_aDefPrt; aEntry.AppendAscii( ")" ); } int nPos = m_aDevicesLB.InsertEntry( aEntry, bFax ? m_aFaxImg : bPdf ? m_aPdfImg : m_aPrinterImg ); m_aDevicesLB.SetEntryData( nPos, (void*)it->getLength() ); if( *it == m_rPIManager.getDefaultPrinter() ) { m_aDevicesLB.SelectEntryPos( nPos ); UpdateText(); } } }