/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/


#ifndef _RTL_BYTESEQ_H_
#define _RTL_BYTESEQ_H_

#include <sal/types.h>
#include <rtl/alloc.h>

#ifdef __cplusplus
extern "C"
{
#endif

/** Assures that the reference count of the given byte sequence is one. Otherwise a new copy
    of the sequence is created with a reference count of one.
    
	@param ppSequence sequence
*/
void SAL_CALL rtl_byte_sequence_reference2One(
	sal_Sequence ** ppSequence )
    SAL_THROW_EXTERN_C();

/** Reallocates length of byte sequence.
    
	@param ppSequence sequence
	@param nSize new size of sequence
*/
void SAL_CALL rtl_byte_sequence_realloc(
	sal_Sequence ** ppSequence, sal_Int32 nSize )
    SAL_THROW_EXTERN_C();

/** Acquires the byte sequence
    
	@param pSequence sequence, that is to be acquired
*/
void SAL_CALL rtl_byte_sequence_acquire(
    sal_Sequence *pSequence )
    SAL_THROW_EXTERN_C();
	
/** Releases the byte sequence. If the refcount drops to zero, the sequence is freed.
	
	@param pSequence sequence, that is to be released; invalid after call
*/
void SAL_CALL rtl_byte_sequence_release(
    sal_Sequence *pSequence )
    SAL_THROW_EXTERN_C();

/** Constructs a bytes sequence with length nLength. All bytes are set to zero.
    
	@param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released;
                      after the call, *ppSequence contains the newly constructed sequence
    @param nLength    length of new sequence
*/
void SAL_CALL rtl_byte_sequence_construct(
    sal_Sequence **ppSequence , sal_Int32 nLength )
    SAL_THROW_EXTERN_C();

/** Constructs a bytes sequence with length nLength. The data is not initialized.
    
	@param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released;
                      after the call, *ppSequence contains the newly constructed sequence
    @param nLength    length of new sequence
*/
void SAL_CALL rtl_byte_sequence_constructNoDefault(
	sal_Sequence **ppSequence , sal_Int32 nLength )
    SAL_THROW_EXTERN_C();

/** Constructs a byte sequence with length nLength and copies nLength bytes from pData.

	@param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released;
                      after the call, *ppSequence contains the newly constructed sequence
    @param pData      initial data
    @param nLength    length of new sequence
*/
void SAL_CALL rtl_byte_sequence_constructFromArray(
	sal_Sequence **ppSequence, const sal_Int8 *pData , sal_Int32 nLength )
    SAL_THROW_EXTERN_C();

/** Assigns the byte sequence pSequence to *ppSequence.
    
	@param ppSequence inout sequence; on entry *ppSequence may be null, otherwise it is released;
                      after the call, *ppSequence references pSequence
	@param pSequence  the source sequence 
*/
void SAL_CALL rtl_byte_sequence_assign(
    sal_Sequence **ppSequence , sal_Sequence *pSequence )
    SAL_THROW_EXTERN_C();

/** Compares two byte sequences.
    
	@return true, if the data within the sequences are identical; false otherwise
*/
sal_Bool SAL_CALL rtl_byte_sequence_equals(
    sal_Sequence *pSequence1 , sal_Sequence *pSequence2 )
    SAL_THROW_EXTERN_C();

/** Returns the data array pointer of the sequence.
    
	@return read-pointer to the data array of the sequence. If rtl_byte_sequence_reference2One()
	        has been called before, the pointer may be casted to a non const pointer and
	        the sequence may be modified
*/
const sal_Int8 *SAL_CALL rtl_byte_sequence_getConstArray(
    sal_Sequence *pSequence )
    SAL_THROW_EXTERN_C();

/** Returns the length of the sequence
    
    @param pSequence sequence handle
    @return length of the sequence
*/
sal_Int32 SAL_CALL rtl_byte_sequence_getLength(
    sal_Sequence *pSequence )
    SAL_THROW_EXTERN_C();

#ifdef __cplusplus
}
namespace rtl
{

enum __ByteSequence_NoDefault
{
	/** This enum value can be used to create a bytesequence with uninitalized data
	*/
	BYTESEQ_NODEFAULT = 0xcafe
};

enum __ByteSequence_NoAcquire
{
	/** This enum value can be used to create a bytesequence from a C-Handle without
        acquiring the handle.
	*/
	BYTESEQ_NOACQUIRE = 0xcafebabe
};

/** C++ class representing a SAL byte sequence.
	C++ Sequences are reference counted and shared, so the sequence keeps a handle to its data.
	To keep value semantics, copies are only generated if the sequence is to be modified
    (new handle).
*/
class ByteSequence
{
	/** sequence handle
        @internal
	*/
	sal_Sequence * _pSequence;
	
public:
	// these are here to force memory de/allocation to sal lib.
    /** @internal */
	inline static void * SAL_CALL operator new ( size_t nSize ) SAL_THROW( () )
		{ return ::rtl_allocateMemory( nSize ); }
    /** @internal */
	inline static void SAL_CALL operator delete ( void * pMem ) SAL_THROW( () )
		{ ::rtl_freeMemory( pMem ); }
    /** @internal */
	inline static void * SAL_CALL operator new ( size_t, void * pMem ) SAL_THROW( () )
		{ return pMem; }
    /** @internal */
	inline static void SAL_CALL operator delete ( void *, void * ) SAL_THROW( () )
		{}
    
	/** Default constructor: Creates an empty sequence.
	*/
	inline ByteSequence() SAL_THROW( () );
	/** Copy constructor: Creates a copy of given sequence.
        
		@param rSeq another byte sequence
	*/
	inline ByteSequence( const ByteSequence & rSeq ) SAL_THROW( () );
	/** Copy constructor Creates a copy from the C-Handle.
        
		@param pSequence another byte sequence handle
	*/
	inline ByteSequence( sal_Sequence *pSequence ) SAL_THROW( () );
	/** Constructor: Creates a copy of given data bytes.
        
		@param pElements an array of bytes
		@param len number of bytes
	*/
	inline ByteSequence( const sal_Int8 * pElements, sal_Int32 len );
	/** Constructor: Creates sequence of given length and initializes all bytes to 0.
        
		@param len initial sequence length
	*/
	inline ByteSequence( sal_Int32 len );
	/** Constructor: Creates sequence of given length and does NOT initialize data.
                     Use this ctor for performance optimization only.
                     
		@param len initial sequence length
		@param nodefault dummy parameter forcing explicit BYTESEQ_NODEFAULT
	*/
	inline ByteSequence( sal_Int32 len , enum __ByteSequence_NoDefault nodefault );
	/** Constructor:
        Creates a sequence from a C-Handle without acquiring the handle, thus taking
        over owenership. Eitherway the handle is release by the destructor.
        This ctor is useful, when working with a c-interface (it safes a pair of
        acquire and release call and is thus a performance optimization only).
                     
        @param pSequence sequence handle to be taken over
        @param noacquire dummy parameter forcing explicit BYTESEQ_NOACQUIRE
	*/
	inline ByteSequence( sal_Sequence *pSequence , enum __ByteSequence_NoAcquire noacquire ) SAL_THROW( () );
	/** Destructor: Releases sequence handle. Last handle will free memory.
	*/
	inline ~ByteSequence() SAL_THROW( () );
	
	/** Assignment operator: Acquires given sequence handle and releases a previously set handle.
        
		@param rSeq another byte sequence
		@return this sequence
	*/
	inline ByteSequence & SAL_CALL operator = ( const ByteSequence & rSeq ) SAL_THROW( () );
	
	/** Gets the length of sequence.
        
		@return length of sequence
	*/
    inline sal_Int32 SAL_CALL getLength() const SAL_THROW( () )
		{ return _pSequence->nElements; }
	
	/** Gets a pointer to byte array for READING. If the sequence has a length of 0, then the
        returned pointer is undefined.
        
		@return pointer to byte array
	*/
    inline const sal_Int8 * SAL_CALL getConstArray() const SAL_THROW( () )
		{ return (const sal_Int8 *)_pSequence->elements; }
	/** Gets a pointer to elements array for READING AND WRITING. In general if the sequence
        has a handle acquired by other sequences (reference count > 1), then a new sequence is
        created copying all bytes to keep value semantics!
		If the sequence has a length of 0, then the returned pointer is undefined.
        
		@return pointer to elements array
	*/
    inline sal_Int8 * SAL_CALL getArray();
	
	/** Non-const index operator:
        Obtains a reference to byte indexed at given position.
        In general if the sequence has a handle acquired by other
        sequences (reference count > 1), then a new sequence is created
        copying all bytes to keep value semantics!
        
        @attention
        The implementation does NOT check for array bounds!
        
		@param nIndex index
		@return non-const C++ reference to element at index nIndex
	*/
	inline sal_Int8 & SAL_CALL operator [] ( sal_Int32 nIndex );

	/** Const index operator: Obtains a reference to byte indexed at given position.
                              The implementation does NOT check for array bounds!
                              
		@param nIndex index
		@return const C++ reference to byte at element of indenx nIndex
	*/
	inline const sal_Int8 & SAL_CALL operator [] ( sal_Int32 nIndex ) const SAL_THROW( () )
		{ return getConstArray()[ nIndex ]; }
	
	/** Equality operator: Compares two sequences.
        
		@param rSeq another byte sequence (right side)
		@return true if both sequences are equal, false otherwise
	*/
	inline sal_Bool SAL_CALL operator == ( const ByteSequence & rSeq ) const SAL_THROW( () );
	/** Unequality operator: Compares two sequences.
        
		@param rSeq another byte sequence (right side)
		@return false if both sequences are equal, true otherwise
	*/
	inline sal_Bool SAL_CALL operator != ( const ByteSequence & rSeq ) const SAL_THROW( () );
	
	/** Reallocates sequence to new length. If the sequence has a handle acquired by other sequences
		(reference count > 1), then the remaining elements are copied to a new sequence handle to
        keep value semantics!
        
		@param nSize new size of sequence
	*/
	inline void SAL_CALL realloc( sal_Int32 nSize );
    
	/** Returns the UNnacquired C handle of the sequence

        @return UNacquired handle of the sequence
    */
	inline sal_Sequence * SAL_CALL getHandle() const SAL_THROW( () )
		{ return _pSequence; }
	/** Returns the UNnacquired C handle of the sequence (for compatibility reasons)
        
        @return UNacquired handle of the sequence
    */
	inline sal_Sequence * SAL_CALL get() const SAL_THROW( () )
		{ return _pSequence; }
};

}
#endif
#endif