/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ // MARKER(update_precomp.py): autogen include statement, do not remove #include "precompiled_sd.hxx" #include "fuconrec.hxx" #include #include #include #include #include "app.hrc" #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include // #88751# #include // #97016# #include #include "ViewShell.hxx" #include "ViewShellBase.hxx" #include "ToolBarManager.hxx" // #109583# #include #include #include #include "sdresid.hxx" #include "View.hxx" #include "sdpage.hxx" #include "Window.hxx" #include "stlpool.hxx" #include "drawdoc.hxx" #include "res_bmp.hrc" #include "glob.hrc" namespace sd { TYPEINIT1( FuConstructRectangle, FuConstruct ); /************************************************************************* |* |* Konstruktor |* \************************************************************************/ FuConstructRectangle::FuConstructRectangle ( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq) : FuConstruct(pViewSh, pWin, pView, pDoc, rReq) { } FunctionReference FuConstructRectangle::Create( ViewShell* pViewSh, ::sd::Window* pWin, ::sd::View* pView, SdDrawDocument* pDoc, SfxRequest& rReq, bool bPermanent ) { FuConstructRectangle* pFunc; FunctionReference xFunc( pFunc = new FuConstructRectangle( pViewSh, pWin, pView, pDoc, rReq ) ); xFunc->DoExecute(rReq); pFunc->SetPermanent(bPermanent); return xFunc; } void FuConstructRectangle::DoExecute( SfxRequest& rReq ) { FuConstruct::DoExecute( rReq ); mpViewShell->GetViewShellBase().GetToolBarManager()->SetToolBar( ToolBarManager::TBG_FUNCTION, ToolBarManager::msDrawingObjectToolBar); const SfxItemSet *pArgs = rReq.GetArgs (); if (pArgs) { switch (nSlotId) { case SID_DRAW_ELLIPSE : { SFX_REQUEST_ARG (rReq, pCenterX, SfxUInt32Item, ID_VAL_CENTER_X, sal_False); SFX_REQUEST_ARG (rReq, pCenterY, SfxUInt32Item, ID_VAL_CENTER_Y, sal_False); SFX_REQUEST_ARG (rReq, pAxisX, SfxUInt32Item, ID_VAL_AXIS_X, sal_False); SFX_REQUEST_ARG (rReq, pAxisY, SfxUInt32Item, ID_VAL_AXIS_Y, sal_False); Rectangle aNewRectangle (pCenterX->GetValue () - pAxisX->GetValue () / 2, pCenterY->GetValue () - pAxisY->GetValue () / 2, pCenterX->GetValue () + pAxisX->GetValue () / 2, pCenterY->GetValue () + pAxisY->GetValue () / 2); SdrCircObj *pNewCircle = new SdrCircObj (OBJ_CIRC, aNewRectangle); SdrPageView *pPV = mpView->GetSdrPageView(); mpView->InsertObjectAtView(pNewCircle, *pPV, SDRINSERT_SETDEFLAYER | SDRINSERT_SETDEFATTR); } break; case SID_DRAW_RECT : { SFX_REQUEST_ARG (rReq, pMouseStartX, SfxUInt32Item, ID_VAL_MOUSESTART_X, sal_False); SFX_REQUEST_ARG (rReq, pMouseStartY, SfxUInt32Item, ID_VAL_MOUSESTART_Y, sal_False); SFX_REQUEST_ARG (rReq, pMouseEndX, SfxUInt32Item, ID_VAL_MOUSEEND_X, sal_False); SFX_REQUEST_ARG (rReq, pMouseEndY, SfxUInt32Item, ID_VAL_MOUSEEND_Y, sal_False); Rectangle aNewRectangle (pMouseStartX->GetValue (), pMouseStartY->GetValue (), pMouseEndX->GetValue (), pMouseEndY->GetValue ()); SdrRectObj *pNewRect = new SdrRectObj (aNewRectangle); SdrPageView *pPV = mpView->GetSdrPageView(); mpView->InsertObjectAtView(pNewRect, *pPV, SDRINSERT_SETDEFLAYER | SDRINSERT_SETDEFATTR); } break; } } if (nSlotId == SID_TOOL_CONNECTOR || nSlotId == SID_CONNECTOR_ARROW_START || nSlotId == SID_CONNECTOR_ARROW_END || nSlotId == SID_CONNECTOR_ARROWS || nSlotId == SID_CONNECTOR_CIRCLE_START || nSlotId == SID_CONNECTOR_CIRCLE_END || nSlotId == SID_CONNECTOR_CIRCLES || nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES || nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES || nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW ) { mpView->UnmarkAll(); } } /************************************************************************* |* |* MouseButtonDown-event |* \************************************************************************/ sal_Bool FuConstructRectangle::MouseButtonDown(const MouseEvent& rMEvt) { sal_Bool bReturn = FuConstruct::MouseButtonDown(rMEvt); if ( rMEvt.IsLeft() && !mpView->IsAction() ) { Point aPnt( mpWindow->PixelToLogic( rMEvt.GetPosPixel() ) ); mpWindow->CaptureMouse(); sal_uInt16 nDrgLog = sal_uInt16 ( mpWindow->PixelToLogic(Size(DRGPIX,0)).Width() ); if (mpView->GetCurrentObjIdentifier() == OBJ_CAPTION) { Size aCaptionSize(846, 846); // (4x2)cm bReturn = mpView->BegCreateCaptionObj(aPnt, aCaptionSize, (OutputDevice*) NULL, nDrgLog); } else { mpView->BegCreateObj(aPnt, (OutputDevice*) NULL, nDrgLog); } SdrObject* pObj = mpView->GetCreateObj(); if (pObj) { SfxItemSet aAttr(mpDoc->GetPool()); SetStyleSheet(aAttr, pObj); SetAttributes(aAttr, pObj); SetLineEnds(aAttr, pObj); pObj->SetMergedItemSet(aAttr); if( nSlotId == SID_DRAW_CAPTION_VERTICAL ) ( (SdrTextObj*) pObj)->SetVerticalWriting( sal_True ); } } return bReturn; } /************************************************************************* |* |* MouseMove-event |* \************************************************************************/ sal_Bool FuConstructRectangle::MouseMove(const MouseEvent& rMEvt) { return FuConstruct::MouseMove(rMEvt); } /************************************************************************* |* |* MouseButtonUp-event |* \************************************************************************/ sal_Bool FuConstructRectangle::MouseButtonUp(const MouseEvent& rMEvt) { sal_Bool bReturn(sal_False); if(mpView->IsCreateObj() && rMEvt.IsLeft()) { SdrObject* pObj = mpView->GetCreateObj(); if(pObj && mpView->EndCreateObj(SDRCREATE_FORCEEND)) { if(SID_DRAW_MEASURELINE == nSlotId) { SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin(); String aStr(SdResId(STR_LAYER_MEASURELINES)); pObj->SetLayer(rAdmin.GetLayerID(aStr, sal_False)); } // #88751# init text position when vertica caption object is created if(pObj->ISA(SdrCaptionObj) && SID_DRAW_CAPTION_VERTICAL == nSlotId) { // draw text object, needs to be initialized when vertical text is used SfxItemSet aSet(pObj->GetMergedItemSet()); aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); // #109583# // Correct the value of SDRATTR_TEXTDIRECTION to avoid SetItemSet // calling SetVerticalWriting() again since this item may not yet // be set at the object and thus may differ from verical state of // the object. aSet.Put(SvxWritingModeItem(com::sun::star::text::WritingMode_TB_RL, SDRATTR_TEXTDIRECTION)); pObj->SetMergedItemSet(aSet); } bReturn = sal_True; } } bReturn = FuConstruct::MouseButtonUp (rMEvt) || bReturn; if (!bPermanent) mpViewShell->GetViewFrame()->GetDispatcher()->Execute(SID_OBJECT_SELECT, SFX_CALLMODE_ASYNCHRON); return bReturn; } /************************************************************************* |* |* Tastaturereignisse bearbeiten |* |* Wird ein KeyEvent bearbeitet, so ist der Return-Wert sal_True, andernfalls |* sal_False. |* \************************************************************************/ sal_Bool FuConstructRectangle::KeyInput(const KeyEvent& rKEvt) { sal_Bool bReturn = FuConstruct::KeyInput(rKEvt); return(bReturn); } /************************************************************************* |* |* Function aktivieren |* \************************************************************************/ void FuConstructRectangle::Activate() { SdrObjKind aObjKind; switch (nSlotId) { case SID_LINE_ARROW_START: case SID_LINE_ARROW_END: case SID_LINE_ARROWS: case SID_LINE_ARROW_CIRCLE: case SID_LINE_CIRCLE_ARROW: case SID_LINE_ARROW_SQUARE: case SID_LINE_SQUARE_ARROW: mpView->SetGlueVisible(); // keine break ! case SID_DRAW_LINE : case SID_DRAW_XLINE: aObjKind = OBJ_LINE; break; case SID_DRAW_MEASURELINE: { aObjKind = OBJ_MEASURE; } break; case SID_DRAW_RECT : case SID_DRAW_RECT_NOFILL : case SID_DRAW_RECT_ROUND : case SID_DRAW_RECT_ROUND_NOFILL: case SID_DRAW_SQUARE : case SID_DRAW_SQUARE_NOFILL : case SID_DRAW_SQUARE_ROUND : case SID_DRAW_SQUARE_ROUND_NOFILL: { aObjKind = OBJ_RECT; } break; case SID_DRAW_ELLIPSE : case SID_DRAW_ELLIPSE_NOFILL: case SID_DRAW_CIRCLE : case SID_DRAW_CIRCLE_NOFILL : { aObjKind = OBJ_CIRC; } break; case SID_DRAW_CAPTION: case SID_DRAW_CAPTION_VERTICAL: { aObjKind = OBJ_CAPTION; } break; case SID_TOOL_CONNECTOR: case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_CURVE: case SID_CONNECTOR_CURVE_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_END: case SID_CONNECTOR_CURVE_ARROWS: case SID_CONNECTOR_CURVE_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLES: case SID_CONNECTOR_LINES: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLES: { aObjKind = OBJ_EDGE; mpView->SetGlueVisible(); } break; default: { aObjKind = OBJ_RECT; } break; } mpView->SetCurrentObj((sal_uInt16)aObjKind); FuConstruct::Activate(); } /************************************************************************* |* |* Function deaktivieren |* \************************************************************************/ void FuConstructRectangle::Deactivate() { if( nSlotId == SID_TOOL_CONNECTOR || nSlotId == SID_CONNECTOR_ARROW_START || nSlotId == SID_CONNECTOR_ARROW_END || nSlotId == SID_CONNECTOR_ARROWS || nSlotId == SID_CONNECTOR_CIRCLE_START || nSlotId == SID_CONNECTOR_CIRCLE_END || nSlotId == SID_CONNECTOR_CIRCLES || nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES || nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES || nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW ) { mpView->SetGlueVisible( sal_False ); } FuConstruct::Deactivate(); } /************************************************************************* |* |* Attribute fuer das zu erzeugende Objekt setzen |* \************************************************************************/ void FuConstructRectangle::SetAttributes(SfxItemSet& rAttr, SdrObject* pObj) { if (nSlotId == SID_DRAW_RECT_ROUND || nSlotId == SID_DRAW_RECT_ROUND_NOFILL || nSlotId == SID_DRAW_SQUARE_ROUND || nSlotId == SID_DRAW_SQUARE_ROUND_NOFILL) { /********************************************************************** * Abgerundete Ecken **********************************************************************/ rAttr.Put(SdrEckenradiusItem(500)); } else if (nSlotId == SID_CONNECTOR_LINE || nSlotId == SID_CONNECTOR_LINE_ARROW_START || nSlotId == SID_CONNECTOR_LINE_ARROW_END || nSlotId == SID_CONNECTOR_LINE_ARROWS || nSlotId == SID_CONNECTOR_LINE_CIRCLE_START || nSlotId == SID_CONNECTOR_LINE_CIRCLE_END || nSlotId == SID_CONNECTOR_LINE_CIRCLES) { /********************************************************************** * Direkt-Verbinder **********************************************************************/ rAttr.Put(SdrEdgeKindItem(SDREDGE_ONELINE)); } else if (nSlotId == SID_CONNECTOR_LINES || nSlotId == SID_CONNECTOR_LINES_ARROW_START || nSlotId == SID_CONNECTOR_LINES_ARROW_END || nSlotId == SID_CONNECTOR_LINES_ARROWS || nSlotId == SID_CONNECTOR_LINES_CIRCLE_START || nSlotId == SID_CONNECTOR_LINES_CIRCLE_END || nSlotId == SID_CONNECTOR_LINES_CIRCLES) { /********************************************************************** * Linien-Verbinder **********************************************************************/ rAttr.Put(SdrEdgeKindItem(SDREDGE_THREELINES)); } else if (nSlotId == SID_CONNECTOR_CURVE || nSlotId == SID_CONNECTOR_CURVE_ARROW_START || nSlotId == SID_CONNECTOR_CURVE_ARROW_END || nSlotId == SID_CONNECTOR_CURVE_ARROWS || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_START || nSlotId == SID_CONNECTOR_CURVE_CIRCLE_END || nSlotId == SID_CONNECTOR_CURVE_CIRCLES) { /********************************************************************** * Kurven-Verbinder **********************************************************************/ rAttr.Put(SdrEdgeKindItem(SDREDGE_BEZIER)); } else if ( nSlotId == SID_DRAW_CAPTION || nSlotId == SID_DRAW_CAPTION_VERTICAL ) { /********************************************************************** * Legendenobjekt **********************************************************************/ Size aSize(pObj->GetLogicRect().GetSize()); rAttr.Put( SdrTextMinFrameHeightItem( aSize.Height() ) ); rAttr.Put( SdrTextMinFrameWidthItem( aSize.Width() ) ); rAttr.Put( SdrTextAutoGrowHeightItem( sal_True ) ); rAttr.Put( SdrTextAutoGrowWidthItem( sal_True ) ); // #103516# Support full with for vertical caption objects, too if(SID_DRAW_CAPTION == nSlotId) rAttr.Put( SdrTextHorzAdjustItem( SDRTEXTHORZADJUST_BLOCK ) ); else rAttr.Put( SdrTextVertAdjustItem( SDRTEXTVERTADJUST_BLOCK ) ); rAttr.Put( SvxAdjustItem( SVX_ADJUST_CENTER, EE_PARA_JUST ) ); rAttr.Put( SdrTextLeftDistItem( 100 ) ); rAttr.Put( SdrTextRightDistItem( 100 ) ); rAttr.Put( SdrTextUpperDistItem( 100 ) ); rAttr.Put( SdrTextLowerDistItem( 100 ) ); } else if (nSlotId == SID_DRAW_MEASURELINE) { /********************************************************************** * Masslinie **********************************************************************/ SdPage* pPage = (SdPage*) mpView->GetSdrPageView()->GetPage(); String aName(SdResId(STR_POOLSHEET_MEASURE)); SfxStyleSheet* pSheet = (SfxStyleSheet*) pPage->GetModel()-> GetStyleSheetPool()-> Find(aName, SD_STYLE_FAMILY_GRAPHICS); DBG_ASSERT(pSheet, "Objektvorlage nicht gefunden"); if (pSheet) { pObj->SetStyleSheet(pSheet, sal_False); } SdrLayerAdmin& rAdmin = mpDoc->GetLayerAdmin(); String aStr(SdResId(STR_LAYER_MEASURELINES)); pObj->SetLayer(rAdmin.GetLayerID(aStr, sal_False)); } else if (nSlotId == OBJ_CUSTOMSHAPE ) { } } /************************************************************************* |* |* Linienanfaenge und -enden fuer das zu erzeugende Objekt setzen |* \************************************************************************/ ::basegfx::B2DPolyPolygon getPolygon( sal_uInt16 nResId, SdrModel* pDoc ) { ::basegfx::B2DPolyPolygon aRetval; XLineEndList* pLineEndList = pDoc->GetLineEndList(); if( pLineEndList ) { String aArrowName( SVX_RES(nResId) ); long nCount = pLineEndList->Count(); long nIndex; for( nIndex = 0L; nIndex < nCount; nIndex++ ) { XLineEndEntry* pEntry = pLineEndList->GetLineEnd(nIndex); if( pEntry->GetName() == aArrowName ) { aRetval = pEntry->GetLineEnd(); break; } } } return aRetval; } void FuConstructRectangle::SetLineEnds(SfxItemSet& rAttr, SdrObject* pObj) { if ( (pObj->GetObjIdentifier() == OBJ_EDGE && nSlotId != SID_TOOL_CONNECTOR && nSlotId != SID_CONNECTOR_LINE && nSlotId != SID_CONNECTOR_LINES && nSlotId != SID_CONNECTOR_CURVE) || nSlotId == SID_LINE_ARROW_START || nSlotId == SID_LINE_ARROW_END || nSlotId == SID_LINE_ARROWS || nSlotId == SID_LINE_ARROW_CIRCLE || nSlotId == SID_LINE_CIRCLE_ARROW || nSlotId == SID_LINE_ARROW_SQUARE || nSlotId == SID_LINE_SQUARE_ARROW ) { /************************************************************** * Linienanfaenge und -enden attributieren **************************************************************/ // Pfeilspitze ::basegfx::B2DPolyPolygon aArrow( getPolygon( RID_SVXSTR_ARROW, mpDoc ) ); if( !aArrow.count() ) { ::basegfx::B2DPolygon aNewArrow; aNewArrow.append(::basegfx::B2DPoint(10.0, 0.0)); aNewArrow.append(::basegfx::B2DPoint(0.0, 30.0)); aNewArrow.append(::basegfx::B2DPoint(20.0, 30.0)); aNewArrow.setClosed(true); aArrow.append(aNewArrow); } // Kreis ::basegfx::B2DPolyPolygon aCircle( getPolygon( RID_SVXSTR_CIRCLE, mpDoc ) ); if( !aCircle.count() ) { ::basegfx::B2DPolygon aNewCircle; aNewCircle = ::basegfx::tools::createPolygonFromEllipse(::basegfx::B2DPoint(0.0, 0.0), 250.0, 250.0); aNewCircle.setClosed(true); aCircle.append(aNewCircle); } // Quadrat ::basegfx::B2DPolyPolygon aSquare( getPolygon( RID_SVXSTR_SQUARE, mpDoc ) ); if( !aSquare.count() ) { ::basegfx::B2DPolygon aNewSquare; aNewSquare.append(::basegfx::B2DPoint(0.0, 0.0)); aNewSquare.append(::basegfx::B2DPoint(10.0, 0.0)); aNewSquare.append(::basegfx::B2DPoint(10.0, 10.0)); aNewSquare.append(::basegfx::B2DPoint(0.0, 10.0)); aNewSquare.setClosed(true); aSquare.append(aNewSquare); } SfxItemSet aSet( mpDoc->GetPool() ); mpView->GetAttributes( aSet ); // #i3908# Here, the default Line Start/End width for arrow construction is // set. To have the same value in all situations (construction) in i3908 // it was decided to change the default to 0.03 cm for all situations. long nWidth = 300; // (1/100th mm) // Linienstaerke ermitteln und daraus die Linienendenstaerke berechnen if( aSet.GetItemState( XATTR_LINEWIDTH ) != SFX_ITEM_DONTCARE ) { long nValue = ( ( const XLineWidthItem& ) aSet.Get( XATTR_LINEWIDTH ) ).GetValue(); if( nValue > 0 ) nWidth = nValue * 3; } switch (nSlotId) { case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_CURVE_ARROWS: case SID_LINE_ARROWS: { // Verbinder mit Pfeil-Enden rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineStartWidthItem(nWidth)); rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_START: case SID_LINE_ARROW_START: case SID_LINE_ARROW_CIRCLE: case SID_LINE_ARROW_SQUARE: { // Verbinder mit Pfeil-Anfang rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_CURVE_ARROW_END: case SID_LINE_ARROW_END: case SID_LINE_CIRCLE_ARROW: case SID_LINE_SQUARE_ARROW: { // Verbinder mit Pfeil-Ende rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_ARROW), aArrow)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_LINES_CIRCLES: case SID_CONNECTOR_CURVE_CIRCLES: { // Verbinder mit Kreis-Enden rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_START: { // Verbinder mit Kreis-Anfang rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLE_END: { // Verbinder mit Kreis-Ende rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; }; // Und nochmal fuer die noch fehlenden Enden switch (nSlotId) { case SID_LINE_ARROW_CIRCLE: { // Kreis-Ende rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_LINE_CIRCLE_ARROW: { // Kreis-Anfang rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_CIRCLE), aCircle)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; case SID_LINE_ARROW_SQUARE: { // Quadrat-Ende rAttr.Put(XLineEndItem(SVX_RESSTR(RID_SVXSTR_SQUARE), aSquare)); rAttr.Put(XLineEndWidthItem(nWidth)); } break; case SID_LINE_SQUARE_ARROW: { // Quadrat-Anfang rAttr.Put(XLineStartItem(SVX_RESSTR(RID_SVXSTR_SQUARE), aSquare)); rAttr.Put(XLineStartWidthItem(nWidth)); } break; } } } // #97016# SdrObject* FuConstructRectangle::CreateDefaultObject(const sal_uInt16 nID, const Rectangle& rRectangle) { DBG_ASSERT( (nID != SID_DRAW_FONTWORK) && (nID != SID_DRAW_FONTWORK_VERTICAL ), "FuConstRectangle::CreateDefaultObject can not create Fontwork shapes!" ); // case SID_DRAW_LINE: // case SID_DRAW_XLINE: // case SID_DRAW_MEASURELINE: // case SID_LINE_ARROW_START: // case SID_LINE_ARROW_END: // case SID_LINE_ARROWS: // case SID_LINE_ARROW_CIRCLE: // case SID_LINE_CIRCLE_ARROW: // case SID_LINE_ARROW_SQUARE: // case SID_LINE_SQUARE_ARROW: // case SID_DRAW_RECT: // case SID_DRAW_RECT_NOFILL: // case SID_DRAW_RECT_ROUND: // case SID_DRAW_RECT_ROUND_NOFILL: // case SID_DRAW_SQUARE: // case SID_DRAW_SQUARE_NOFILL: // case SID_DRAW_SQUARE_ROUND: // case SID_DRAW_SQUARE_ROUND_NOFILL: // case SID_DRAW_ELLIPSE: // case SID_DRAW_ELLIPSE_NOFILL: // case SID_DRAW_CIRCLE: // case SID_DRAW_CIRCLE_NOFILL: // case SID_DRAW_CAPTION: // case SID_DRAW_CAPTION_VERTICAL: // case SID_TOOL_CONNECTOR: // case SID_CONNECTOR_ARROW_START: // case SID_CONNECTOR_ARROW_END: // case SID_CONNECTOR_ARROWS: // case SID_CONNECTOR_CIRCLE_START: // case SID_CONNECTOR_CIRCLE_END: // case SID_CONNECTOR_CIRCLES: // case SID_CONNECTOR_LINE: // case SID_CONNECTOR_LINE_ARROW_START: // case SID_CONNECTOR_LINE_ARROW_END: // case SID_CONNECTOR_LINE_ARROWS: // case SID_CONNECTOR_LINE_CIRCLE_START: // case SID_CONNECTOR_LINE_CIRCLE_END: // case SID_CONNECTOR_LINE_CIRCLES: // case SID_CONNECTOR_CURVE: // case SID_CONNECTOR_CURVE_ARROW_START: // case SID_CONNECTOR_CURVE_ARROW_END: // case SID_CONNECTOR_CURVE_ARROWS: // case SID_CONNECTOR_CURVE_CIRCLE_START: // case SID_CONNECTOR_CURVE_CIRCLE_END: // case SID_CONNECTOR_CURVE_CIRCLES: // case SID_CONNECTOR_LINES: // case SID_CONNECTOR_LINES_ARROW_START: // case SID_CONNECTOR_LINES_ARROW_END: // case SID_CONNECTOR_LINES_ARROWS: // case SID_CONNECTOR_LINES_CIRCLE_START: // case SID_CONNECTOR_LINES_CIRCLE_END: // case SID_CONNECTOR_LINES_CIRCLES: SdrObject* pObj = SdrObjFactory::MakeNewObject( mpView->GetCurrentObjInventor(), mpView->GetCurrentObjIdentifier(), 0L, mpDoc); if(pObj) { Rectangle aRect(rRectangle); if(SID_DRAW_SQUARE == nID || SID_DRAW_SQUARE_NOFILL == nID || SID_DRAW_SQUARE_ROUND == nID || SID_DRAW_SQUARE_ROUND_NOFILL == nID || SID_DRAW_CIRCLE == nID || SID_DRAW_CIRCLE_NOFILL == nID) { // force quadratic ImpForceQuadratic(aRect); } Point aStart = aRect.TopLeft(); Point aEnd = aRect.BottomRight(); switch(nID) { case SID_DRAW_LINE: case SID_DRAW_XLINE: case SID_LINE_ARROW_START: case SID_LINE_ARROW_END: case SID_LINE_ARROWS: case SID_LINE_ARROW_CIRCLE: case SID_LINE_CIRCLE_ARROW: case SID_LINE_ARROW_SQUARE: case SID_LINE_SQUARE_ARROW: { if(pObj->ISA(SdrPathObj)) { sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2); ::basegfx::B2DPolygon aB2DPolygon; aB2DPolygon.append(::basegfx::B2DPoint(aStart.X(), nYMiddle)); aB2DPolygon.append(::basegfx::B2DPoint(aEnd.X(), nYMiddle)); ((SdrPathObj*)pObj)->SetPathPoly(::basegfx::B2DPolyPolygon(aB2DPolygon)); } else { DBG_ERROR("Object is NO line object"); } break; } case SID_DRAW_MEASURELINE: { if(pObj->ISA(SdrMeasureObj)) { sal_Int32 nYMiddle((aRect.Top() + aRect.Bottom()) / 2); ((SdrMeasureObj*)pObj)->SetPoint(Point(aStart.X(), nYMiddle), 0); ((SdrMeasureObj*)pObj)->SetPoint(Point(aEnd.X(), nYMiddle), 1); } else { DBG_ERROR("Object is NO measure object"); } break; } case SID_TOOL_CONNECTOR: case SID_CONNECTOR_ARROW_START: case SID_CONNECTOR_ARROW_END: case SID_CONNECTOR_ARROWS: case SID_CONNECTOR_CIRCLE_START: case SID_CONNECTOR_CIRCLE_END: case SID_CONNECTOR_CIRCLES: case SID_CONNECTOR_LINE: case SID_CONNECTOR_LINE_ARROW_START: case SID_CONNECTOR_LINE_ARROW_END: case SID_CONNECTOR_LINE_ARROWS: case SID_CONNECTOR_LINE_CIRCLE_START: case SID_CONNECTOR_LINE_CIRCLE_END: case SID_CONNECTOR_LINE_CIRCLES: case SID_CONNECTOR_CURVE: case SID_CONNECTOR_CURVE_ARROW_START: case SID_CONNECTOR_CURVE_ARROW_END: case SID_CONNECTOR_CURVE_ARROWS: case SID_CONNECTOR_CURVE_CIRCLE_START: case SID_CONNECTOR_CURVE_CIRCLE_END: case SID_CONNECTOR_CURVE_CIRCLES: case SID_CONNECTOR_LINES: case SID_CONNECTOR_LINES_ARROW_START: case SID_CONNECTOR_LINES_ARROW_END: case SID_CONNECTOR_LINES_ARROWS: case SID_CONNECTOR_LINES_CIRCLE_START: case SID_CONNECTOR_LINES_CIRCLE_END: case SID_CONNECTOR_LINES_CIRCLES: { if(pObj->ISA(SdrEdgeObj)) { ((SdrEdgeObj*)pObj)->SetTailPoint(sal_False, aStart); ((SdrEdgeObj*)pObj)->SetTailPoint(sal_True, aEnd); } else { DBG_ERROR("Object is NO connector object"); } break; } case SID_DRAW_CAPTION: case SID_DRAW_CAPTION_VERTICAL: { if(pObj->ISA(SdrCaptionObj)) { sal_Bool bIsVertical(SID_DRAW_CAPTION_VERTICAL == nID); ((SdrTextObj*)pObj)->SetVerticalWriting(bIsVertical); if(bIsVertical) { SfxItemSet aSet(pObj->GetMergedItemSet()); aSet.Put(SdrTextVertAdjustItem(SDRTEXTVERTADJUST_CENTER)); aSet.Put(SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT)); pObj->SetMergedItemSet(aSet); } // For task #105815# the default text is not inserted anymore. // String aText(SdResId(STR_POOLSHEET_TEXT)); // ((SdrCaptionObj*)pObj)->SetText(aText); ((SdrCaptionObj*)pObj)->SetLogicRect(aRect); ((SdrCaptionObj*)pObj)->SetTailPos( aRect.TopLeft() - Point(aRect.GetWidth() / 2, aRect.GetHeight() / 2)); } else { DBG_ERROR("Object is NO caption object"); } break; } default: { pObj->SetLogicRect(aRect); break; } } SfxItemSet aAttr(mpDoc->GetPool()); SetStyleSheet(aAttr, pObj); SetAttributes(aAttr, pObj); SetLineEnds(aAttr, pObj); pObj->SetMergedItemSet(aAttr); } return pObj; } } // end of namespace sd