/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sd.hxx"

#include <com/sun/star/drawing/XDrawPagesSupplier.hpp>

#include "DrawViewShell.hxx"
#include <vcl/msgbox.hxx>
#include <svl/urlbmk.hxx>
#include <svx/svdpagv.hxx>
#include <svx/svdundo.hxx>
#include <svx/fmglob.hxx>
#include <editeng/eeitem.hxx>
#ifndef _FLDITEM_HXX
#include <editeng/flditem.hxx>
#endif
#ifndef _SVXIDS_HRC
#include <svx/svxids.hrc>
#endif
#include <svx/ruler.hxx>
#ifndef _GLOBL3D_HXX
#include <svx/globl3d.hxx>
#endif
#include <editeng/outliner.hxx>
#ifndef _SFX_CLIENTSH_HXX
#include <sfx2/ipclient.hxx>
#endif
#include <sfx2/request.hxx>
#include <sfx2/dispatch.hxx>
#include <svx/svdopath.hxx>
#include <sfx2/viewfrm.hxx>
#include <editeng/editview.hxx>
#include <vcl/cursor.hxx>


#include "app.hrc"
#include "glob.hrc"
#include "strings.hrc"
#include "res_bmp.hrc"
#include "DrawDocShell.hxx"
#include "drawdoc.hxx"
#include "Window.hxx"
#include "fupoor.hxx"
#include "fusnapln.hxx"
#include "app.hxx"
#include "Ruler.hxx"
#include "sdresid.hxx"
#include "GraphicViewShell.hxx"
#include "sdpage.hxx"
#include "slideshow.hxx"
#include "anminfo.hxx"
#include "sdpopup.hxx"
#include "drawview.hxx"
#include <svx/bmpmask.hxx>
#include "LayerTabBar.hxx"

// #97016# IV
#include <svx/svditer.hxx>

namespace sd {

#define PIPETTE_RANGE 0

#ifdef _MSC_VER
#pragma optimize ( "", off )
#endif

using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::drawing;

/*************************************************************************
|*
|* aktuelle Seite loeschen
|*
\************************************************************************/

void DrawViewShell::DeleteActualPage()
{
	sal_uInt16			nPage = maTabControl.GetCurPageId() - 1;

	mpDrawView->SdrEndTextEdit();

	try
	{
	    Reference<XDrawPagesSupplier> xDrawPagesSupplier( GetDoc()->getUnoModel(), UNO_QUERY_THROW );
	    Reference<XDrawPages> xPages( xDrawPagesSupplier->getDrawPages(), UNO_QUERY_THROW );
		Reference< XDrawPage > xPage( xPages->getByIndex( nPage ), UNO_QUERY_THROW );
		xPages->remove( xPage );
	}
	catch( Exception& )
	{
		DBG_ERROR("SelectionManager::DeleteSelectedMasterPages(), exception caught!");
	}
}

/*************************************************************************
|*
|* aktuelle Ebene loeschen
|*
\************************************************************************/

void DrawViewShell::DeleteActualLayer()
{
	SdrLayerAdmin& rAdmin = GetDoc()->GetLayerAdmin();
	const String&  rName  = GetLayerTabControl()->GetPageText(GetLayerTabControl()->GetCurPageId());
	String         aString(SdResId(STR_ASK_DELETE_LAYER));

	// Platzhalter ersetzen
	sal_uInt16 nPos = aString.Search(sal_Unicode('$'));
	aString.Erase(nPos, 1);
	aString.Insert(rName, nPos);

	if (QueryBox(GetActiveWindow(), WB_YES_NO, aString).Execute() == RET_YES)
	{
		const SdrLayer* pLayer = rAdmin.GetLayer(rName, sal_False);
		mpDrawView->DeleteLayer( pLayer->GetName() );

		// damit TabBar und Window neu gezeichnet werden;
		// sollte spaeter wie beim Aendern der Layerfolge durch einen
		// Hint von Joe angestossen werden
		// ( View::Notify() --> ViewShell::ResetActualLayer() )

        mbIsLayerModeActive = false; 	// damit ChangeEditMode() ueberhaupt was tut
		ChangeEditMode(GetEditMode(), true);
	}
}


/*************************************************************************
|*
|* Keyboard event
|*
\************************************************************************/

sal_Bool DrawViewShell::KeyInput (const KeyEvent& rKEvt, ::sd::Window* pWin)
{
	sal_Bool bRet = sal_False;

	if ( !IsInputLocked() || ( rKEvt.GetKeyCode().GetCode() == KEY_ESCAPE ) )
	{
		// #97016# IV
		if(KEY_RETURN == rKEvt.GetKeyCode().GetCode()
			&& rKEvt.GetKeyCode().IsMod1()
			&& GetView()->IsTextEdit())
		{
			// this should be used for cursor travelling.
			SdPage* pActualPage = GetActualPage();
			const SdrMarkList& rMarkList = GetView()->GetMarkedObjectList();
			SdrTextObj* pCandidate = 0L;

			if(pActualPage && 1 == rMarkList.GetMarkCount())
			{
				SdrMark* pMark = rMarkList.GetMark(0);

				// remember which object was the text in edit mode
				SdrObject* pOldObj = pMark->GetMarkedSdrObj();

				// end text edit now
				GetView()->SdrEndTextEdit();

				// look for a new candidate, a successor of pOldObj
				SdrObjListIter aIter(*pActualPage, IM_DEEPNOGROUPS);
				sal_Bool bDidVisitOldObject(sal_False);

				while(aIter.IsMore() && !pCandidate)
				{
					SdrObject* pObj = aIter.Next();

					if(pObj && pObj->ISA(SdrTextObj))
					{
						sal_uInt32 nInv(pObj->GetObjInventor());
						sal_uInt16 nKnd(pObj->GetObjIdentifier());

						if(SdrInventor == nInv &&
							(OBJ_TITLETEXT == nKnd || OBJ_OUTLINETEXT == nKnd || OBJ_TEXT == nKnd)
							&& bDidVisitOldObject)
						{
							pCandidate = (SdrTextObj*)pObj;
						}

						if(pObj == pOldObj)
						{
							bDidVisitOldObject = sal_True;
						}
					}
				}
			}

			if(pCandidate)
			{
				// set the new candidate to text edit mode
				GetView()->UnMarkAll();
				GetView()->MarkObj(pCandidate, GetView()->GetSdrPageView());

				GetViewFrame()->GetDispatcher()->Execute(
					SID_ATTR_CHAR, SFX_CALLMODE_ASYNCHRON);
			}
			else
			{
				// insert a new page with the same page layout
				GetViewFrame()->GetDispatcher()->Execute(
					SID_INSERTPAGE_QUICK, SFX_CALLMODE_ASYNCHRON);
			}
		}
		else
		{
			bRet = ViewShell::KeyInput(rKEvt, pWin);
		}
	}

	return bRet;
}

/*************************************************************************
|*
|* Vom Lineal ausgehenden Drag (Hilflinien, Ursprung) beginnen
|*
\************************************************************************/

void DrawViewShell::StartRulerDrag (
    const Ruler& rRuler,
    const MouseEvent& rMEvt)
{
    GetActiveWindow()->CaptureMouse();

	Point aWPos = GetActiveWindow()->PixelToLogic(GetActiveWindow()->GetPointerPosPixel());

	if ( rRuler.GetExtraRect().IsInside(rMEvt.GetPosPixel()) )
	{
		mpDrawView->BegSetPageOrg(aWPos);
        mbIsRulerDrag = sal_True;
	}
	else
	{
        // #i34536# if no guide-lines are visible yet, that show them
        if( ! mpDrawView->IsHlplVisible())
            mpDrawView->SetHlplVisible( sal_True );

        SdrHelpLineKind eKind;

        if ( rMEvt.IsMod1() )
            eKind = SDRHELPLINE_POINT;
        else if ( rRuler.IsHorizontal() )
            eKind = SDRHELPLINE_HORIZONTAL;
        else
            eKind = SDRHELPLINE_VERTICAL;

        mpDrawView->BegDragHelpLine(aWPos, eKind);
        mbIsRulerDrag = sal_True;
	}
}

/*************************************************************************
|*
|* MouseButtonDown event
|*
\************************************************************************/

void DrawViewShell::MouseButtonDown(const MouseEvent& rMEvt,
    ::sd::Window* pWin)
{
    // We have to check if a context menu is shown and we have an UI
    // active inplace client. In that case we have to ignore the mouse
    // button down event. Otherwise we would crash (context menu has been
    // opened by inplace client and we would deactivate the inplace client,
    // the contex menu is closed by VCL asynchronously which in the end
    // would work on deleted objects or the context menu has no parent anymore)
    // See #126086# and #128122#
    SfxInPlaceClient* pIPClient = GetViewShell()->GetIPClient();
    sal_Bool bIsOleActive = ( pIPClient && pIPClient->IsObjectInPlaceActive() );

    if ( bIsOleActive && PopupMenu::IsInExecute() )
        return;

	if ( !IsInputLocked() )
	{
		ViewShell::MouseButtonDown(rMEvt, pWin);

		if ( mbPipette )
			( (SvxBmpMask*) GetViewFrame()->GetChildWindow( SvxBmpMaskChildWindow::GetChildWindowId() )->GetWindow() )->PipetteClicked();
	}
}

/*************************************************************************
|*
|* MouseMove event
|*
\************************************************************************/


void DrawViewShell::MouseMove(const MouseEvent& rMEvt, ::sd::Window* pWin)
{
	if ( !IsInputLocked() )
	{
		if ( mpDrawView->IsAction() )
		{
			Rectangle aOutputArea(Point(0,0), GetActiveWindow()->GetOutputSizePixel());

			if ( !aOutputArea.IsInside(rMEvt.GetPosPixel()) )
			{
				sal_Bool bInsideOtherWindow = sal_False;

                if (mpContentWindow.get() != NULL)
                {
                    aOutputArea = Rectangle(Point(0,0),
                        mpContentWindow->GetOutputSizePixel());

                    Point aPos = mpContentWindow->GetPointerPosPixel();
                    if ( aOutputArea.IsInside(aPos) )
                        bInsideOtherWindow = sal_True;
                }

				if (! GetActiveWindow()->HasFocus ())
				{
					GetActiveWindow()->ReleaseMouse ();
					mpDrawView->BrkAction ();
					return;
				}
				else if ( bInsideOtherWindow )
				{
					GetActiveWindow()->ReleaseMouse();
					pWin->CaptureMouse ();
				}
			}
			else if ( pWin != GetActiveWindow() )
				 pWin->CaptureMouse();
		}

		// #109585#
		// Since the next MouseMove may execute a IsSolidDraggingNow() in
		// SdrCreateView::MovCreateObj and there the ApplicationBackgroundColor
		// is needed it is necessary to set it here.
		if(mpDrawView!=NULL && GetDoc()!=NULL)
		{
			svtools::ColorConfig aColorConfig;
			Color aFillColor;

			if(DOCUMENT_TYPE_IMPRESS == GetDoc()->GetDocumentType())
			{
				aFillColor = Color( aColorConfig.GetColorValue( svtools::APPBACKGROUND ).nColor );
			}
			else
			{
				aFillColor = Color( aColorConfig.GetColorValue( svtools::DOCCOLOR ).nColor );
			}

			mpDrawView->SetApplicationBackgroundColor(aFillColor);
		}

		ViewShell::MouseMove(rMEvt, pWin);

		if( !mbMousePosFreezed )
			maMousePos = rMEvt.GetPosPixel();

		Rectangle aRect;

		if ( mbIsRulerDrag )
		{
			Point aLogPos = GetActiveWindow()->PixelToLogic(maMousePos);
			mpDrawView->MovAction(aLogPos);
		}

		if ( mpDrawView->IsAction() )
		{
			mpDrawView->TakeActionRect(aRect);
			aRect = GetActiveWindow()->LogicToPixel(aRect);
		}
		else
		{
			aRect = Rectangle(maMousePos, maMousePos);
		}

		ShowMousePosInfo(aRect, pWin);

		if ( mbPipette && GetViewFrame()->HasChildWindow( SvxBmpMaskChildWindow::GetChildWindowId() ) )
		{
			const long		nStartX = maMousePos.X() - PIPETTE_RANGE;
			const long		nEndX = maMousePos.X() + PIPETTE_RANGE;
			const long		nStartY = maMousePos.Y() - PIPETTE_RANGE;
			const long		nEndY = maMousePos.Y() + PIPETTE_RANGE;
			long			nRed = 0;
			long			nGreen = 0;
			long			nBlue = 0;
			const double	fDiv = ( ( PIPETTE_RANGE << 1 ) + 1 ) * ( ( PIPETTE_RANGE << 1 ) + 1 );

			for ( long nY = nStartY; nY <= nEndY; nY++ )
			{
				for( long nX = nStartX; nX <= nEndX; nX++ )
				{
					const Color aCol( pWin->GetPixel( pWin->PixelToLogic( Point( nX, nY ) ) ) );

					nRed += aCol.GetRed();
					nGreen += aCol.GetGreen();
					nBlue += aCol.GetBlue();
				}
			}

			( (SvxBmpMask*) GetViewFrame()->GetChildWindow( SvxBmpMaskChildWindow::GetChildWindowId() )->GetWindow() )->
				SetColor( Color( (sal_uInt8) ( nRed / fDiv + .5 ),
								 (sal_uInt8) ( nGreen / fDiv + .5 ),
								 (sal_uInt8) ( nBlue / fDiv + .5 ) ) );
		}
	}
}


/*************************************************************************
|*
|* MouseButtonUp event
|*
\************************************************************************/

void DrawViewShell::MouseButtonUp(const MouseEvent& rMEvt, ::sd::Window* pWin)
{
	if ( !IsInputLocked() )
	{
		FASTBOOL bIsSetPageOrg = mpDrawView->IsSetPageOrg();

		if (mbIsRulerDrag)
		{
			Rectangle aOutputArea(Point(0,0), GetActiveWindow()->GetOutputSizePixel());

			if (aOutputArea.IsInside(rMEvt.GetPosPixel()))
			{
				mpDrawView->EndAction();

				if (bIsSetPageOrg)
					GetViewFrame()->GetBindings().Invalidate(SID_RULER_NULL_OFFSET);
			}
			else if (rMEvt.IsLeft() && bIsSetPageOrg)
			{
				mpDrawView->BrkAction();
				SdPage* pPage = (SdPage*) mpDrawView->GetSdrPageView()->GetPage();
				Point aOrg(pPage->GetLftBorder(), pPage->GetUppBorder());
				mpDrawView->GetSdrPageView()->SetPageOrigin(aOrg);
				GetViewFrame()->GetBindings().Invalidate(SID_RULER_NULL_OFFSET);
			}
			else
			{
				mpDrawView->BrkAction();
			}

			GetActiveWindow()->ReleaseMouse();
			mbIsRulerDrag = sal_False;
		}
		else
    		ViewShell::MouseButtonUp(rMEvt, pWin);
	}
}

/*************************************************************************
|*
|* Command event
|*
\************************************************************************/

void DrawViewShell::Command(const CommandEvent& rCEvt, ::sd::Window* pWin)
{
    // The command event is send to the window after a possible context
    // menu from an inplace client is closed. Now we have the chance to
    // deactivate the inplace client without any problem regarding parent
    // windows and code on the stack.
    // For more information, see #126086# and #128122#
    SfxInPlaceClient* pIPClient = GetViewShell()->GetIPClient();
    sal_Bool bIsOleActive = ( pIPClient && pIPClient->IsObjectInPlaceActive() );
    if ( bIsOleActive && ( rCEvt.GetCommand() == COMMAND_CONTEXTMENU ))
    {
        // Deactivate OLE object
        mpDrawView->UnmarkAll();
        SelectionHasChanged();
        return;
    }

    if ( !IsInputLocked() )
	{
	    if( GetView() &&GetView()->getSmartTags().Command(rCEvt) )
	        return;

		const bool bNativeShow (SlideShow::IsRunning(GetViewShellBase()));

        if( rCEvt.GetCommand() == COMMAND_PASTESELECTION && !bNativeShow )
        {
			TransferableDataHelper aDataHelper( TransferableDataHelper::CreateFromSelection( GetActiveWindow() ) );

			if( aDataHelper.GetTransferable().is() )
			{
            	Point       aPos;
                sal_Int8    nDnDAction = DND_ACTION_COPY;

		        if( GetActiveWindow() )
			        aPos = GetActiveWindow()->PixelToLogic( rCEvt.GetMousePosPixel() );

				if( !mpDrawView->InsertData( aDataHelper, aPos, nDnDAction, sal_False ) )
				{
					INetBookmark	aINetBookmark( aEmptyStr, aEmptyStr );

					if( ( aDataHelper.HasFormat( SOT_FORMATSTR_ID_NETSCAPE_BOOKMARK ) &&
						  aDataHelper.GetINetBookmark( SOT_FORMATSTR_ID_NETSCAPE_BOOKMARK, aINetBookmark ) ) ||
						( aDataHelper.HasFormat( SOT_FORMATSTR_ID_FILEGRPDESCRIPTOR ) &&
						  aDataHelper.GetINetBookmark( SOT_FORMATSTR_ID_FILEGRPDESCRIPTOR, aINetBookmark ) ) ||
						( aDataHelper.HasFormat( SOT_FORMATSTR_ID_UNIFORMRESOURCELOCATOR ) &&
						  aDataHelper.GetINetBookmark( SOT_FORMATSTR_ID_UNIFORMRESOURCELOCATOR, aINetBookmark ) ) )
					{
						InsertURLField( aINetBookmark.GetURL(), aINetBookmark.GetDescription(), aEmptyStr, NULL );
					}
				}
			}
        }
        else if( rCEvt.GetCommand() == COMMAND_CONTEXTMENU && !bNativeShow &&
			     pWin != NULL && !mpDrawView->IsAction() && !SD_MOD()->GetWaterCan() )
		{
			sal_uInt16 nSdResId = 0;          // ResourceID fuer Popup-Menue
			sal_Bool bGraphicShell = this->ISA(GraphicViewShell);

			// Ist ein Fangobjekt unter dem Mauszeiger?
			SdrPageView* pPV;
			Point	aMPos = pWin->PixelToLogic( maMousePos );
			sal_uInt16	nHitLog = (sal_uInt16) GetActiveWindow()->PixelToLogic(
                Size(FuPoor::HITPIX, 0 ) ).Width();
			sal_uInt16	nHelpLine;
			// fuer Klebepunkt
			SdrObject*	pObj = NULL;
			sal_uInt16		nPickId = 0;
			// fuer Feldbefehl
			OutlinerView* pOLV = mpDrawView->GetTextEditOutlinerView();
			const SvxFieldItem* pFldItem = NULL;
			if( pOLV )
				pFldItem = pOLV->GetFieldAtSelection();
				//pFldItem = pOLV->GetFieldUnderMousePointer();

			// Hilfslinie
			if ( mpDrawView->PickHelpLine( aMPos, nHitLog, *GetActiveWindow(), nHelpLine, pPV) )
			{
				nSdResId = RID_DRAW_SNAPOBJECT_POPUP;
                ShowSnapLineContextMenu(*pPV, nHelpLine, rCEvt.GetMousePosPixel());
                return;
			}
			// Klebepunkt unter dem Mauszeiger markiert?
			else if( mpDrawView->PickGluePoint( aMPos, pObj, nPickId, pPV ) &&
					 mpDrawView->IsGluePointMarked( pObj, nPickId ) )
			{
				nSdResId = RID_DRAW_GLUEPOINT_POPUP;
			}
			// Feldbefehl ?
			else if( pFldItem && (pFldItem->GetField()->ISA( SvxDateField ) ||
								 pFldItem->GetField()->ISA( SvxExtTimeField ) ||
								 pFldItem->GetField()->ISA( SvxExtFileField ) ||
								 pFldItem->GetField()->ISA( SvxAuthorField ) ) )
			{
                LanguageType eLanguage( LANGUAGE_SYSTEM );

                // #101743# Format popup with outliner language, if possible
                if( pOLV->GetOutliner() )
                {
                    ESelection aSelection( pOLV->GetSelection() );
                    eLanguage = pOLV->GetOutliner()->GetLanguage( aSelection.nStartPara, aSelection.nStartPos );
                }

                SdFieldPopup aFieldPopup( pFldItem->GetField(), eLanguage );

				if ( rCEvt.IsMouseEvent() )
					aMPos = rCEvt.GetMousePosPixel();
				else
					aMPos = Point( 20, 20 );
				aFieldPopup.Execute( pWin, aMPos );

				SvxFieldData* pField = aFieldPopup.GetField();
				if( pField )
				{
                    SvxFieldItem aFieldItem( *pField, EE_FEATURE_FIELD );
					//pOLV->DeleteSelected(); <-- fehlt leider !
					// Feld selektieren, so dass es beim Insert geloescht wird
					ESelection aSel = pOLV->GetSelection();
					sal_Bool bSel = sal_True;
					if( aSel.nStartPos == aSel.nEndPos )
					{
						bSel = sal_False;
						aSel.nEndPos++;
					}
					pOLV->SetSelection( aSel );

					pOLV->InsertField( aFieldItem );

					// Selektion wird wieder in den Ursprungszustand gebracht
					if( !bSel )
						aSel.nEndPos--;
					pOLV->SetSelection( aSel );

					delete pField;
				}
			}
			else
			{
				// ist etwas selektiert?
				if (mpDrawView->AreObjectsMarked() &&
					mpDrawView->GetMarkedObjectList().GetMarkCount() == 1 )
				{
					pObj = mpDrawView->GetMarkedObjectList().GetMark(0)->GetMarkedSdrObj();
					if( HasCurrentFunction(SID_BEZIER_EDIT)	&& (dynamic_cast< SdrPathObj * >( pObj ) != 0 ) )
					{
						nSdResId = RID_BEZIER_POPUP;
					}
					else
					{
						if( mpDrawView->GetTextEditObject() )
						{
							OutlinerView* pOutlinerView = mpDrawView->GetTextEditOutlinerView();
							Point aPos(rCEvt.GetMousePosPixel());

							if ( pOutlinerView )
							{
								if( (  rCEvt.IsMouseEvent() && pOutlinerView->IsWrongSpelledWordAtPos(aPos) ) ||
								    ( !rCEvt.IsMouseEvent() && pOutlinerView->IsCursorAtWrongSpelledWord() ) )
								{
									// #91457# Popup for Online-Spelling now handled by DrawDocShell
									// Link aLink = LINK(GetDoc(), SdDrawDocument, OnlineSpellCallback);
									Link aLink = LINK(GetDocSh(), DrawDocShell, OnlineSpellCallback);

									if( !rCEvt.IsMouseEvent() )
									{
										aPos = GetActiveWindow()->LogicToPixel( pOutlinerView->GetEditView().GetCursor()->GetPos() );
									}
                                    // While showing the spell context menu
                                    // we lock the input so that another
                                    // context menu can not be opened during
                                    // that time (crash #i43235#).  In order
                                    // to not lock the UI completely we
                                    // first release the mouse.
                                    GetActiveWindow()->ReleaseMouse();
                                    LockInput();
									pOutlinerView->ExecuteSpellPopup(aPos, &aLink);
                                    UnlockInput();
								}
								else
								{
								    if( (pObj->GetObjInventor() == SdrInventor) && (pObj->GetObjIdentifier() == OBJ_TABLE) )
								    {
								        nSdResId = RID_DRAW_TABLEOBJ_INSIDE_POPUP;
								    }
								    else
								    {
								        nSdResId = RID_DRAW_TEXTOBJ_INSIDE_POPUP;
								    }
								}
							}
						}
						else
						{
							sal_uInt32 nInv = pObj->GetObjInventor();
							sal_uInt16 nId = pObj->GetObjIdentifier();

							if (nInv == SdrInventor)
							{
								switch ( nId )
								{
									case OBJ_CAPTION:
									case OBJ_TITLETEXT:
									case OBJ_OUTLINETEXT:
									case OBJ_TEXT:
										nSdResId = bGraphicShell ? RID_GRAPHIC_TEXTOBJ_POPUP :
																	RID_DRAW_TEXTOBJ_POPUP;
										break;

									case OBJ_PATHLINE:
									case OBJ_PLIN:
										nSdResId = bGraphicShell ? RID_GRAPHIC_POLYLINEOBJ_POPUP :
																	RID_DRAW_POLYLINEOBJ_POPUP;
										break;

									case OBJ_FREELINE:
									case OBJ_EDGE:		// Connector
										nSdResId = bGraphicShell ? RID_GRAPHIC_EDGEOBJ_POPUP :
																	RID_DRAW_EDGEOBJ_POPUP;
										break;

									case OBJ_LINE:
										nSdResId = bGraphicShell ? RID_GRAPHIC_LINEOBJ_POPUP :
																	RID_DRAW_LINEOBJ_POPUP;
										break;

									case OBJ_MEASURE:
										nSdResId = bGraphicShell ? RID_GRAPHIC_MEASUREOBJ_POPUP :
																	RID_DRAW_MEASUREOBJ_POPUP;
										break;

									case OBJ_RECT:
									case OBJ_CIRC:
									case OBJ_FREEFILL:
									case OBJ_PATHFILL:
									case OBJ_POLY:
									case OBJ_SECT:
									case OBJ_CARC:
									case OBJ_CCUT:
										nSdResId = bGraphicShell ? RID_GRAPHIC_GEOMOBJ_POPUP :
																	RID_DRAW_GEOMOBJ_POPUP;
										break;

									case OBJ_CUSTOMSHAPE:
										nSdResId = bGraphicShell ? RID_GRAPHIC_CUSTOMSHAPE_POPUP :
																	RID_DRAW_CUSTOMSHAPE_POPUP;
										break;

									case OBJ_GRUP:
										nSdResId = bGraphicShell ? RID_GRAPHIC_GROUPOBJ_POPUP :
																	RID_DRAW_GROUPOBJ_POPUP;
										break;

									case OBJ_GRAF:
										nSdResId = bGraphicShell ? RID_GRAPHIC_GRAPHIC_POPUP :
																	RID_DRAW_GRAPHIC_POPUP;
										break;

									case OBJ_OLE2:
										nSdResId = bGraphicShell ? RID_GRAPHIC_OLE2_POPUP :
																	RID_DRAW_OLE2_POPUP;
										break;
									case OBJ_MEDIA:
										nSdResId = bGraphicShell ? RID_GRAPHIC_MEDIA_POPUP :
																	RID_DRAW_MEDIA_POPUP;
										break;
									case OBJ_TABLE:
										nSdResId = bGraphicShell ? RID_GRAPHIC_TABLE_POPUP :
																	RID_DRAW_TABLE_POPUP;
										break;
								}
							}
							else if( nInv == E3dInventor /*&& nId == E3D_POLYSCENE_ID*/)
							{
								if( nId == E3D_POLYSCENE_ID || nId == E3D_SCENE_ID )
								{
									if( !mpDrawView->IsGroupEntered() )
										nSdResId = bGraphicShell ? RID_GRAPHIC_3DSCENE_POPUP :
																RID_DRAW_3DSCENE_POPUP;
									else
										nSdResId = bGraphicShell ? RID_GRAPHIC_3DSCENE2_POPUP :
																RID_DRAW_3DSCENE2_POPUP;
								}
								else
									nSdResId = bGraphicShell ? RID_GRAPHIC_3DOBJ_POPUP :
																RID_DRAW_3DOBJ_POPUP;
							}
							else if( nInv == FmFormInventor )
							{
								nSdResId = RID_FORM_CONTROL_POPUP;
							}
						}
					}
				}

				// Mehrfachselektion
				else if (mpDrawView->AreObjectsMarked() &&
					mpDrawView->GetMarkedObjectList().GetMarkCount() > 1 )
				{
					nSdResId = bGraphicShell ? RID_GRAPHIC_MULTISELECTION_POPUP :
												RID_DRAW_MULTISELECTION_POPUP;
				}

				// nichts selektiert
				else
				{
					nSdResId = bGraphicShell ? RID_GRAPHIC_NOSEL_POPUP :
												RID_DRAW_NOSEL_POPUP;
				}
			}
			// Popup-Menue anzeigen
			if (nSdResId)
			{
				GetActiveWindow()->ReleaseMouse();

                if(rCEvt.IsMouseEvent())
				    GetViewFrame()->GetDispatcher()->ExecutePopup(SdResId(nSdResId));
                else
                {
                    //#106326# don't open contextmenu at mouse position if not opened via mouse

                    //middle of the window if nothing is marked
                    Point aMenuPos(GetActiveWindow()->GetSizePixel().Width()/2
                            ,GetActiveWindow()->GetSizePixel().Height()/2);

                    //middle of the bounding rect if something is marked
                    if( mpDrawView->AreObjectsMarked() && mpDrawView->GetMarkedObjectList().GetMarkCount() >= 1 )
                    {
                        Rectangle aMarkRect;
                        mpDrawView->GetMarkedObjectList().TakeBoundRect(NULL,aMarkRect);
                        aMenuPos = GetActiveWindow()->LogicToPixel( aMarkRect.Center() );

                        //move the point into the visible window area
                        if( aMenuPos.X() < 0 )
                            aMenuPos.X() = 0;
                        if( aMenuPos.Y() < 0 )
                            aMenuPos.Y() = 0;
                        if( aMenuPos.X() > GetActiveWindow()->GetSizePixel().Width() )
                            aMenuPos.X() = GetActiveWindow()->GetSizePixel().Width();
                        if( aMenuPos.Y() > GetActiveWindow()->GetSizePixel().Height() )
                            aMenuPos.Y() = GetActiveWindow()->GetSizePixel().Height();
                    }

                    //open context menu at that point
                    GetViewFrame()->GetDispatcher()->ExecutePopup(SdResId(nSdResId),GetActiveWindow(),&aMenuPos);
                }
				mbMousePosFreezed = sal_False;
			}
		}
		else
		{
			ViewShell::Command(rCEvt, pWin);
		}
	}
}

/*************************************************************************
|*
|* Linealmarkierungen anzeigen
|*
\************************************************************************/

void DrawViewShell::ShowMousePosInfo(const Rectangle& rRect,
    ::sd::Window* pWin)
{
	if (mbHasRulers && pWin )
	{
		RulerLine	pHLines[2];
		RulerLine	pVLines[2];
		long        nHOffs = 0L;
		long        nVOffs = 0L;
		sal_uInt16		nCnt;

        if (mpHorizontalRuler.get() != NULL)
            mpHorizontalRuler->SetLines();

        if (mpVerticalRuler.get() != NULL)
            mpVerticalRuler->SetLines();

		if (mpHorizontalRuler.get() != NULL)
		{
			nHOffs = mpHorizontalRuler->GetNullOffset() +
					 mpHorizontalRuler->GetPageOffset();
		}

		if (mpVerticalRuler.get() != NULL)
		{
			nVOffs = mpVerticalRuler->GetNullOffset() +
					 mpVerticalRuler->GetPageOffset();
		}

		nCnt = 1;
		pHLines[0].nPos = rRect.Left() - nHOffs;
		pVLines[0].nPos = rRect.Top()  - nVOffs;
		pHLines[0].nStyle = 0;
		pVLines[0].nStyle = 0;

		if ( rRect.Right() != rRect.Left() || rRect.Bottom() != rRect.Top() )
		{
			pHLines[1].nPos = rRect.Right()  - nHOffs;
			pVLines[1].nPos = rRect.Bottom() - nVOffs;
			pHLines[1].nStyle = 0;
			pVLines[1].nStyle = 0;
			nCnt++;
		}

		if (mpHorizontalRuler.get() != NULL)
			mpHorizontalRuler->SetLines(nCnt, pHLines);
		if (mpVerticalRuler.get() != NULL)
			mpVerticalRuler->SetLines(nCnt, pVLines);
	}

	// StatusBar Koordinatenanzeige
    OSL_ASSERT (GetViewShell()!=NULL);
    if ( !GetViewShell()->GetUIActiveClient() )
	{
		SfxItemSet aSet(GetPool(), SID_CONTEXT, SID_CONTEXT,
								   SID_ATTR_POSITION, SID_ATTR_POSITION,
								   SID_ATTR_SIZE, SID_ATTR_SIZE,
								   0L);

//		  GetStatusBarState(aSet);	nicht performant bei gedrueckter Modifiertaste!!

		aSet.Put( SfxStringItem( SID_CONTEXT, mpDrawView->GetStatusText() ) );

		SfxBindings& rBindings = GetViewFrame()->GetBindings();
		rBindings.SetState(aSet);
		rBindings.Invalidate(SID_CONTEXT);
		rBindings.Invalidate(SID_ATTR_POSITION);
		rBindings.Invalidate(SID_ATTR_SIZE);
    }
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

void DrawViewShell::LockInput()
{
	mnLockCount++;
}

/*************************************************************************
|*
|*
|*
\************************************************************************/

void DrawViewShell::UnlockInput()
{
	DBG_ASSERT( mnLockCount, "Input for this shell is not locked!" );
	if ( mnLockCount )
		mnLockCount--;
}




void DrawViewShell::ShowSnapLineContextMenu (
    SdrPageView& rPageView,
    const sal_uInt16 nSnapLineIndex,
    const Point& rMouseLocation)
{
    const SdrHelpLine& rHelpLine (rPageView.GetHelpLines()[nSnapLineIndex]);
    ::boost::scoped_ptr<PopupMenu> pMenu (new PopupMenu ());

    if (rHelpLine.GetKind() == SDRHELPLINE_POINT)
    {
        pMenu->InsertItem(
            SID_SET_SNAPITEM,
            String(SdResId(STR_POPUP_EDIT_SNAPPOINT)));
        pMenu->InsertSeparator();
        pMenu->InsertItem(
            SID_DELETE_SNAPITEM,
            String(SdResId(STR_POPUP_DELETE_SNAPPOINT)));
    }
    else
    {
        pMenu->InsertItem(
            SID_SET_SNAPITEM,
            String(SdResId(STR_POPUP_EDIT_SNAPLINE)));
        pMenu->InsertSeparator();
        pMenu->InsertItem(
            SID_DELETE_SNAPITEM,
            String(SdResId(STR_POPUP_DELETE_SNAPLINE)));
    }

    pMenu->RemoveDisabledEntries(sal_False, sal_False);

    const sal_uInt16 nResult = pMenu->Execute(
        GetActiveWindow(),
        Rectangle(rMouseLocation, Size(10,10)),
        POPUPMENU_EXECUTE_DOWN);
    switch (nResult)
    {
        case SID_SET_SNAPITEM:
        {
            SfxUInt32Item aHelpLineItem (ID_VAL_INDEX, nSnapLineIndex);
            const SfxPoolItem* aArguments[] = {&aHelpLineItem, NULL};
            GetViewFrame()->GetDispatcher()->Execute(
                SID_SET_SNAPITEM,
                SFX_CALLMODE_SLOT,
                aArguments);
        }
        break;

        case SID_DELETE_SNAPITEM:
        {
            rPageView.DeleteHelpLine(nSnapLineIndex);
        }
        break;

        default:
            break;
    }
}




#ifdef _MSC_VER
#pragma optimize ( "", on )
#endif

} // end of namespace sd