/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/




// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#include <com/sun/star/chart2/XChartDocument.hpp>
#include <hintids.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/brkitem.hxx>
#include <editeng/protitem.hxx>
#include <editeng/boxitem.hxx>
#include <editeng/shaditem.hxx>
#include <fmtfsize.hxx>
#include <fmtornt.hxx>
#include <fmtfordr.hxx>
#include <fmtpdsc.hxx>
#include <fmtanchr.hxx>
#include <fmtlsplt.hxx>
#include <frmatr.hxx>
#include <charatr.hxx>
#include <cellfrm.hxx>
#include <pagefrm.hxx>
#include <tabcol.hxx>
#include <doc.hxx>
#include <IDocumentUndoRedo.hxx>
#include <UndoManager.hxx>
#include <cntfrm.hxx>
#include <pam.hxx>
#include <swcrsr.hxx>
#include <viscrs.hxx>
#include <swtable.hxx>
#include <ndtxt.hxx>
#include <swundo.hxx>
#include <tblsel.hxx>
#include <fldbas.hxx>
#include <poolfmt.hxx>
#include <tabfrm.hxx>
#include <UndoCore.hxx>
#include <UndoRedline.hxx>
#include <UndoDelete.hxx>
#include <UndoTable.hxx>
#include <hints.hxx>
#include <tblafmt.hxx>
#include <swcache.hxx>
#include <ddefld.hxx>
#include <frminf.hxx>
#include <cellatr.hxx>
#include <swtblfmt.hxx>
#include <swddetbl.hxx>
#include <mvsave.hxx>
#include <docary.hxx>
#include <redline.hxx>
#include <rolbck.hxx>
#include <tblrwcl.hxx>
#include <editsh.hxx>
#include <txtfrm.hxx>
#include <ftnfrm.hxx>
#include <section.hxx>
#include <frmtool.hxx>
#include <node2lay.hxx>
#include <comcore.hrc>
#include "docsh.hxx"
#include <tabcol.hxx>
#include <unochart.hxx>
#include <node.hxx>
#include <ndtxt.hxx>
#include <map>
#include <algorithm>
#include <rootfrm.hxx>
#include <fldupde.hxx>
#include <switerator.hxx>

#ifndef DBG_UTIL
#define CHECK_TABLE(t)
#else
#ifdef DEBUG
#define CHECK_TABLE(t) (t).CheckConsistency();
#else
#define CHECK_TABLE(t)
#endif
#endif


using namespace ::com::sun::star;

// #i17764# delete table redlines when modifying the table structure?
// #define DEL_TABLE_REDLINES 1

const sal_Unicode T2T_PARA = 0x0a;

extern void ClearFEShellTabCols();

// steht im gctable.cxx
extern sal_Bool lcl_GC_Line_Border( const SwTableLine*& , void* pPara );

#ifdef DEL_TABLE_REDLINES
class lcl_DelRedlines
{
	SwDoc* pDoc;
public:
	lcl_DelRedlines( const SwTableNode& rNd, sal_Bool bCheckForOwnRedline );
	lcl_DelRedlines( SwPaM& rPam );

    ~lcl_DelRedlines() { pDoc->EndUndo(UNDO_EMPTY, NULL); }
};

lcl_DelRedlines::lcl_DelRedlines( SwPaM & rPam) : pDoc( rPam.GetDoc() )
{
    pDoc->GetIDocumentUndoRedo().StartUndo(UNDO_EMPTY, NULL);
	if( !pDoc->IsIgnoreRedline() && pDoc->GetRedlineTbl().Count() )
		pDoc->AcceptRedline( rPam, true );
}
#endif

void lcl_SetDfltBoxAttr( SwFrmFmt& rFmt, sal_uInt8 nId )
{
	sal_Bool bTop = sal_False, bBottom = sal_False, bLeft = sal_False, bRight = sal_False;
	switch ( nId )
	{
	case 0:	bTop = bBottom = bLeft = sal_True; 			break;
	case 1:	bTop = bBottom = bLeft = bRight = sal_True;	break;
	case 2:	bBottom = bLeft = sal_True; 				break;
	case 3: bBottom = bLeft = bRight = sal_True; 		break;
	}

    const sal_Bool bHTML = rFmt.getIDocumentSettingAccess()->get(IDocumentSettingAccess::HTML_MODE);
	Color aCol( bHTML ? COL_GRAY : COL_BLACK );
	SvxBorderLine aLine( &aCol, DEF_LINE_WIDTH_0 );
	if ( bHTML )
	{
		aLine.SetOutWidth( DEF_DOUBLE_LINE7_OUT );
		aLine.SetInWidth ( DEF_DOUBLE_LINE7_IN  );
		aLine.SetDistance( DEF_DOUBLE_LINE7_DIST);
	}
    SvxBoxItem aBox(RES_BOX); aBox.SetDistance( 55 );
	if ( bTop )
		aBox.SetLine( &aLine, BOX_LINE_TOP );
	if ( bBottom )
		aBox.SetLine( &aLine, BOX_LINE_BOTTOM );
	if ( bLeft )
		aBox.SetLine( &aLine, BOX_LINE_LEFT );
	if ( bRight )
		aBox.SetLine( &aLine, BOX_LINE_RIGHT );
    rFmt.SetFmtAttr( aBox );
}

void lcl_SetDfltBoxAttr( SwTableBox& rBox, SvPtrarr &rBoxFmtArr, sal_uInt8 nId,
							const SwTableAutoFmt* pAutoFmt = 0 )
{
	SvPtrarr* pArr = (SvPtrarr*)rBoxFmtArr[ nId ];
	if( !pArr )
	{
		pArr = new SvPtrarr;
		rBoxFmtArr.Replace( pArr, nId );
	}

	SwTableBoxFmt* pNewBoxFmt = 0;
	SwFrmFmt* pBoxFmt = rBox.GetFrmFmt();
	for( sal_uInt16 n = 0; n < pArr->Count(); n += 2 )
		if( pArr->GetObject( n ) == pBoxFmt )
		{
			pNewBoxFmt = (SwTableBoxFmt*)pArr->GetObject( n + 1 );
			break;
		}

	if( !pNewBoxFmt )
	{
		SwDoc* pDoc = pBoxFmt->GetDoc();
		// das Format ist also nicht vorhanden, also neu erzeugen
		pNewBoxFmt = pDoc->MakeTableBoxFmt();
        pNewBoxFmt->SetFmtAttr( pBoxFmt->GetAttrSet().Get( RES_FRM_SIZE ) );

		if( pAutoFmt )
			pAutoFmt->UpdateToSet( nId, (SfxItemSet&)pNewBoxFmt->GetAttrSet(),
									SwTableAutoFmt::UPDATE_BOX,
									pDoc->GetNumberFormatter( sal_True ) );
		else
			::lcl_SetDfltBoxAttr( *pNewBoxFmt, nId );

		void* p = pBoxFmt;
		pArr->Insert( p, pArr->Count() );
		p = pNewBoxFmt;
		pArr->Insert( p, pArr->Count() );
	}
	rBox.ChgFrmFmt( pNewBoxFmt );
}

SwTableBoxFmt *lcl_CreateDfltBoxFmt( SwDoc &rDoc, SvPtrarr &rBoxFmtArr,
									sal_uInt16 nCols, sal_uInt8 nId )
{
	if ( !rBoxFmtArr[nId] )
	{
		SwTableBoxFmt* pBoxFmt = rDoc.MakeTableBoxFmt();
		if( USHRT_MAX != nCols )
            pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
											USHRT_MAX / nCols, 0 ));
		::lcl_SetDfltBoxAttr( *pBoxFmt, nId );
		rBoxFmtArr.Replace( pBoxFmt, nId );
	}
	return (SwTableBoxFmt*)rBoxFmtArr[nId];
}

SwTableBoxFmt *lcl_CreateAFmtBoxFmt( SwDoc &rDoc, SvPtrarr &rBoxFmtArr,
									const SwTableAutoFmt& rAutoFmt,
									sal_uInt16 nCols, sal_uInt8 nId )
{
	if( !rBoxFmtArr[nId] )
	{
		SwTableBoxFmt* pBoxFmt = rDoc.MakeTableBoxFmt();
		rAutoFmt.UpdateToSet( nId, (SfxItemSet&)pBoxFmt->GetAttrSet(),
								SwTableAutoFmt::UPDATE_BOX,
								rDoc.GetNumberFormatter( sal_True ) );
		if( USHRT_MAX != nCols )
            pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
											USHRT_MAX / nCols, 0 ));
		rBoxFmtArr.Replace( pBoxFmt, nId );
	}
	return (SwTableBoxFmt*)rBoxFmtArr[nId];
}

SwTableNode* SwDoc::IsIdxInTbl(const SwNodeIndex& rIdx)
{
	SwTableNode* pTableNd = 0;
	sal_uLong nIndex = rIdx.GetIndex();
	do {
		SwNode* pNd = (SwNode*)GetNodes()[ nIndex ]->StartOfSectionNode();
		if( 0 != ( pTableNd = pNd->GetTableNode() ) )
			break;

		nIndex = pNd->GetIndex();
	} while ( nIndex );
	return pTableNd;
}


// --------------- einfuegen einer neuen Box --------------

	// fuege in der Line, vor der InsPos eine neue Box ein.

sal_Bool SwNodes::InsBoxen( SwTableNode* pTblNd,
						SwTableLine* pLine,
						SwTableBoxFmt* pBoxFmt,
						SwTxtFmtColl* pTxtColl,
                        const SfxItemSet* pAutoAttr,
						sal_uInt16 nInsPos,
						sal_uInt16 nCnt )
{
    if( !nCnt )
		return sal_False;
	ASSERT( pLine, "keine gueltige Zeile" );

	// Index hinter die letzte Box der Line
	sal_uLong nIdxPos = 0;
	SwTableBox *pPrvBox = 0, *pNxtBox = 0;
	if( pLine->GetTabBoxes().Count() )
	{
		if( nInsPos < pLine->GetTabBoxes().Count() )
		{
			if( 0 == (pPrvBox = pLine->FindPreviousBox( pTblNd->GetTable(),
							pLine->GetTabBoxes()[ nInsPos ] )))
				pPrvBox = pLine->FindPreviousBox( pTblNd->GetTable() );
		}
		else if( 0 == ( pNxtBox = pLine->FindNextBox( pTblNd->GetTable(),
							pLine->GetTabBoxes()[ nInsPos-1 ] )))
				pNxtBox = pLine->FindNextBox( pTblNd->GetTable() );
	}
	else if( 0 == ( pNxtBox = pLine->FindNextBox( pTblNd->GetTable() )))
		pPrvBox = pLine->FindPreviousBox( pTblNd->GetTable() );

	if( !pPrvBox && !pNxtBox )
	{
		sal_Bool bSetIdxPos = sal_True;
		if( pTblNd->GetTable().GetTabLines().Count() && !nInsPos )
		{
			const SwTableLine* pTblLn = pLine;
			while( pTblLn->GetUpper() )
				pTblLn = pTblLn->GetUpper()->GetUpper();

			if( pTblNd->GetTable().GetTabLines()[ 0 ] == pTblLn )
			{
				// also vor die erste Box der Tabelle
				while( ( pNxtBox = pLine->GetTabBoxes()[0])->GetTabLines().Count() )
					pLine = pNxtBox->GetTabLines()[0];
				nIdxPos = pNxtBox->GetSttIdx();
				bSetIdxPos = sal_False;
			}
		}
		if( bSetIdxPos )
			// Tabelle ohne irgendeinen Inhalt oder am Ende, also vors Ende
			nIdxPos = pTblNd->EndOfSectionIndex();
	}
	else if( pNxtBox )			// es gibt einen Nachfolger
		nIdxPos = pNxtBox->GetSttIdx();
	else						// es gibt einen Vorgaenger
		nIdxPos = pPrvBox->GetSttNd()->EndOfSectionIndex() + 1;

	SwNodeIndex aEndIdx( *this, nIdxPos );
	for( sal_uInt16 n = 0; n < nCnt; ++n )
	{
		SwStartNode* pSttNd = new SwStartNode( aEndIdx, ND_STARTNODE,
												SwTableBoxStartNode );
		pSttNd->pStartOfSection = pTblNd;
		new SwEndNode( aEndIdx, *pSttNd );

		pPrvBox = new SwTableBox( pBoxFmt, *pSttNd, pLine );

        SwTableBoxes & rTabBoxes = pLine->GetTabBoxes();
        sal_uInt16 nRealInsPos = nInsPos + n;        
        if (nRealInsPos > rTabBoxes.Count())
            nRealInsPos = rTabBoxes.Count();

        rTabBoxes.C40_INSERT( SwTableBox, pPrvBox, nRealInsPos );

		//if( NO_NUMBERING == pTxtColl->GetOutlineLevel()//#outline level,zhaojianwei
		if( ! pTxtColl->IsAssignedToListLevelOfOutlineStyle()//<-end,zhaojianwei
//FEATURE::CONDCOLL
			&& RES_CONDTXTFMTCOLL != pTxtColl->Which()
//FEATURE::CONDCOLL
		)
			new SwTxtNode( SwNodeIndex( *pSttNd->EndOfSectionNode() ),
								pTxtColl, pAutoAttr );
		else
		{
			// Outline-Numerierung richtig behandeln !!!
			SwTxtNode* pTNd = new SwTxtNode(
							SwNodeIndex( *pSttNd->EndOfSectionNode() ),
							(SwTxtFmtColl*)GetDoc()->GetDfltTxtFmtColl(),
							pAutoAttr );
			pTNd->ChgFmtColl( pTxtColl );
		}
	}
	return sal_True;
}

// --------------- einfuegen einer neuen Tabelle --------------

const SwTable* SwDoc::InsertTable( const SwInsertTableOptions& rInsTblOpts,
                                   const SwPosition& rPos, sal_uInt16 nRows,
                                   sal_uInt16 nCols, sal_Int16 eAdjust,
                                   const SwTableAutoFmt* pTAFmt,
                                   const SvUShorts* pColArr,
                                   sal_Bool bCalledFromShell,
                                   sal_Bool bNewModel )
{
    ASSERT( nRows, "Tabelle ohne Zeile?" );
    ASSERT( nCols, "Tabelle ohne Spalten?" );

    {
        // nicht in Fussnoten kopieren !!
        if( rPos.nNode < GetNodes().GetEndOfInserts().GetIndex() &&
            rPos.nNode >= GetNodes().GetEndOfInserts().StartOfSectionIndex() )
            return 0;

        // sollte das ColumnArray die falsche Anzahl haben wird es ignoriert!
        if( pColArr &&
            (nCols + ( text::HoriOrientation::NONE == eAdjust ? 2 : 1 )) != pColArr->Count() )
            pColArr = 0;
    }

    String aTblName = GetUniqueTblName();

    if( GetIDocumentUndoRedo().DoesUndo() )
    {
        GetIDocumentUndoRedo().AppendUndo(
            new SwUndoInsTbl( rPos, nCols, nRows, static_cast<sal_uInt16>(eAdjust),
                                      rInsTblOpts, pTAFmt, pColArr,
                                      aTblName));
    }

    // fuege erstmal die Nodes ein
    // hole das Auto-Format fuer die Tabelle
    SwTxtFmtColl *pBodyColl = GetTxtCollFromPool( RES_POOLCOLL_TABLE ),
                 *pHeadColl = pBodyColl;

    sal_Bool bDfltBorders = 0 != ( rInsTblOpts.mnInsMode & tabopts::DEFAULT_BORDER );

    if( (rInsTblOpts.mnInsMode & tabopts::HEADLINE) && (1 != nRows || !bDfltBorders) )
        pHeadColl = GetTxtCollFromPool( RES_POOLCOLL_TABLE_HDLN );

    const sal_uInt16 nRowsToRepeat =
            tabopts::HEADLINE == (rInsTblOpts.mnInsMode & tabopts::HEADLINE) ?
            rInsTblOpts.mnRowsToRepeat :
            0;

    /* #106283# Save content node to extract FRAMEDIR from. */
    const SwCntntNode * pCntntNd = rPos.nNode.GetNode().GetCntntNode();

    /* #109161# If we are called from a shell pass the attrset from
        pCntntNd (aka the node the table is inserted at) thus causing
        SwNodes::InsertTable to propagate an adjust item if
        necessary. */
    SwTableNode *pTblNd = GetNodes().InsertTable(
        rPos.nNode,
        nCols,
        pBodyColl,
        nRows,
        nRowsToRepeat,
        pHeadColl,
        bCalledFromShell ? &pCntntNd->GetSwAttrSet() : 0 );

    // dann erstelle die Box/Line/Table-Struktur
    SwTableLineFmt* pLineFmt = MakeTableLineFmt();
    SwTableFmt* pTableFmt = MakeTblFrmFmt( aTblName, GetDfltFrmFmt() );

    /* #106283# If the node to insert the table at is a context node and has a
       non-default FRAMEDIR propagate it to the table. */
    if (pCntntNd)
    {
        const SwAttrSet & aNdSet = pCntntNd->GetSwAttrSet();
        const SfxPoolItem *pItem = NULL;

        if (SFX_ITEM_SET == aNdSet.GetItemState( RES_FRAMEDIR, sal_True, &pItem )
            && pItem != NULL)
        {
            pTableFmt->SetFmtAttr( *pItem );
        }
    }

    //Orientation am Fmt der Table setzen
    pTableFmt->SetFmtAttr( SwFmtHoriOrient( 0, eAdjust ) );
    // alle Zeilen haben die Fill-Order von links nach rechts !
    pLineFmt->SetFmtAttr( SwFmtFillOrder( ATT_LEFT_TO_RIGHT ));

    // die Tabelle bekommt USHRT_MAX als default SSize
    SwTwips nWidth = USHRT_MAX;
    if( pColArr )
    {
        sal_uInt16 nSttPos = (*pColArr)[ 0 ];
        sal_uInt16 nLastPos = (*pColArr)[ sal_uInt16(pColArr->Count()-1)];
        if( text::HoriOrientation::NONE == eAdjust )
        {
            sal_uInt16 nFrmWidth = nLastPos;
            nLastPos = (*pColArr)[ sal_uInt16(pColArr->Count()-2)];
            pTableFmt->SetFmtAttr( SvxLRSpaceItem( nSttPos, nFrmWidth - nLastPos, 0, 0, RES_LR_SPACE ) );
        }
        nWidth = nLastPos - nSttPos;
    }
    else if( nCols )
    {
        nWidth /= nCols;
        nWidth *= nCols; // to avoid rounding problems
    }
    pTableFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, nWidth ));
    if( !(rInsTblOpts.mnInsMode & tabopts::SPLIT_LAYOUT) )
        pTableFmt->SetFmtAttr( SwFmtLayoutSplit( sal_False ));

    // verschiebe ggfs. die harten PageDesc/PageBreak Attribute:
    SwCntntNode* pNextNd = GetNodes()[ pTblNd->EndOfSectionIndex()+1 ]
                            ->GetCntntNode();
    if( pNextNd && pNextNd->HasSwAttrSet() )
    {
        const SfxItemSet* pNdSet = pNextNd->GetpSwAttrSet();
        const SfxPoolItem *pItem;
        if( SFX_ITEM_SET == pNdSet->GetItemState( RES_PAGEDESC, sal_False,
            &pItem ) )
        {
            pTableFmt->SetFmtAttr( *pItem );
            pNextNd->ResetAttr( RES_PAGEDESC );
            pNdSet = pNextNd->GetpSwAttrSet();
        }
        if( pNdSet && SFX_ITEM_SET == pNdSet->GetItemState( RES_BREAK, sal_False,
             &pItem ) )
        {
            pTableFmt->SetFmtAttr( *pItem );
            pNextNd->ResetAttr( RES_BREAK );
        }
    }

    SwTable * pNdTbl = &pTblNd->GetTable();
    pNdTbl->RegisterToFormat( *pTableFmt );

    pNdTbl->SetRowsToRepeat( nRowsToRepeat );
    pNdTbl->SetTableModel( bNewModel );

    SvPtrarr aBoxFmtArr( 0, 16 );
    SwTableBoxFmt* pBoxFmt = 0;
    if( !bDfltBorders && !pTAFmt )
    {
        pBoxFmt = MakeTableBoxFmt();
        pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, USHRT_MAX / nCols, 0 ));
    }
    else
    {
        const sal_uInt16 nBoxArrLen = pTAFmt ? 16 : 4;
        for( sal_uInt16 i = 0; i < nBoxArrLen; ++i )
            aBoxFmtArr.Insert( (void*)0, i );
    }
    // --> OD 2008-02-25 #refactorlists#
//    SfxItemSet aCharSet( GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_END-1 );
    SfxItemSet aCharSet( GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_LIST_END-1 );
    // <--

    SwNodeIndex aNdIdx( *pTblNd, 1 );   // auf den ersten Box-StartNode
    SwTableLines& rLines = pNdTbl->GetTabLines();
    for( sal_uInt16 n = 0; n < nRows; ++n )
    {
        SwTableLine* pLine = new SwTableLine( pLineFmt, nCols, 0 );
        rLines.C40_INSERT( SwTableLine, pLine, n );
        SwTableBoxes& rBoxes = pLine->GetTabBoxes();
        for( sal_uInt16 i = 0; i < nCols; ++i )
        {
            SwTableBoxFmt *pBoxF;
            if( pTAFmt )
            {
                sal_uInt8 nId = static_cast<sal_uInt8>(!n ? 0 : (( n+1 == nRows )
                                        ? 12 : (4 * (1 + ((n-1) & 1 )))));
                nId = nId + static_cast<sal_uInt8>( !i ? 0 :
                            ( i+1 == nCols ? 3 : (1 + ((i-1) & 1))));
                pBoxF = ::lcl_CreateAFmtBoxFmt( *this, aBoxFmtArr, *pTAFmt,
                                                nCols, nId );

                // ggfs. noch die Absatz/ZeichenAttribute setzen
                if( pTAFmt->IsFont() || pTAFmt->IsJustify() )
                {
                    aCharSet.ClearItem();
                    pTAFmt->UpdateToSet( nId, aCharSet,
                                        SwTableAutoFmt::UPDATE_CHAR, 0 );
                    if( aCharSet.Count() )
                        GetNodes()[ aNdIdx.GetIndex()+1 ]->GetCntntNode()->
                            SetAttr( aCharSet );
                }
            }
            else if( bDfltBorders )
            {
                sal_uInt8 nBoxId = (i < nCols - 1 ? 0 : 1) + (n ? 2 : 0 );
                pBoxF = ::lcl_CreateDfltBoxFmt( *this, aBoxFmtArr, nCols, nBoxId);
            }
            else
                pBoxF = pBoxFmt;

            // fuer AutoFormat bei der Eingabe: beim Einfuegen der Tabelle
            // werden gleich die Spalten gesetzt. Im Array stehen die
            // Positionen der Spalten!! (nicht deren Breite!)
            if( pColArr )
            {
                nWidth = (*pColArr)[ sal_uInt16(i + 1) ] - (*pColArr)[ i ];
                if( pBoxF->GetFrmSize().GetWidth() != nWidth )
                {
                    if( pBoxF->GetDepends() )       // neues Format erzeugen!
                    {
                        SwTableBoxFmt *pNewFmt = MakeTableBoxFmt();
                        *pNewFmt = *pBoxF;
                        pBoxF = pNewFmt;
                    }
                    pBoxF->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, nWidth ));
                }
            }

            SwTableBox *pBox = new SwTableBox( pBoxF, aNdIdx, pLine);
            rBoxes.C40_INSERT( SwTableBox, pBox, i );
            aNdIdx += 3;        // StartNode, TextNode, EndNode  == 3 Nodes
        }
    }
    // und Frms einfuegen.
    GetNodes().GoNext( &aNdIdx );      // zum naechsten ContentNode
    pTblNd->MakeFrms( &aNdIdx );

    if( IsRedlineOn() || (!IsIgnoreRedline() && pRedlineTbl->Count() ))
    {
        SwPaM aPam( *pTblNd->EndOfSectionNode(), *pTblNd, 1 );
        if( IsRedlineOn() )
            AppendRedline( new SwRedline( nsRedlineType_t::REDLINE_INSERT, aPam ), true);
        else
            SplitRedline( aPam );
    }

    SetModified();
    CHECK_TABLE( *pNdTbl );
    return pNdTbl;
}

SwTableNode* SwNodes::InsertTable( const SwNodeIndex& rNdIdx,
                                   sal_uInt16 nBoxes,
                                   SwTxtFmtColl* pCntntTxtColl,
                                   sal_uInt16 nLines,
                                   sal_uInt16 nRepeat,
								   SwTxtFmtColl* pHeadlineTxtColl,
                                   const SwAttrSet * pAttrSet)
{
	if( !nBoxes )
		return 0;

	// wenn Lines angegeben, erzeuge die Matrix aus Lines & Boxen
	if( !pHeadlineTxtColl || !nLines )
		pHeadlineTxtColl = pCntntTxtColl;

	SwTableNode * pTblNd = new SwTableNode( rNdIdx );
	SwEndNode* pEndNd = new SwEndNode( rNdIdx, *pTblNd );

	if( !nLines )		// fuer die FOR-Schleife
		++nLines;

	SwNodeIndex aIdx( *pEndNd );
	SwTxtFmtColl* pTxtColl = pHeadlineTxtColl;
	for( sal_uInt16 nL = 0; nL < nLines; ++nL )
	{
		for( sal_uInt16 nB = 0; nB < nBoxes; ++nB )
		{
			SwStartNode* pSttNd = new SwStartNode( aIdx, ND_STARTNODE,
													SwTableBoxStartNode );
			pSttNd->pStartOfSection = pTblNd;

			SwTxtNode * pTmpNd = new SwTxtNode( aIdx, pTxtColl );

            // --> FME 2006-04-13 #i60422# Propagate some more attributes.
            // Adjustment was done for #109161#
            const SfxPoolItem* pItem = NULL;
            if ( NULL != pAttrSet )
            {
                static const sal_uInt16 aPropagateItems[] = {
                    RES_PARATR_ADJUST,
                    RES_CHRATR_FONT, RES_CHRATR_FONTSIZE,
                    RES_CHRATR_CJK_FONT, RES_CHRATR_CJK_FONTSIZE,
                    RES_CHRATR_CTL_FONT, RES_CHRATR_CTL_FONTSIZE, 0 };

                const sal_uInt16* pIdx = aPropagateItems;
                while ( *pIdx != 0 )
                {
                    if ( SFX_ITEM_SET != pTmpNd->GetSwAttrSet().GetItemState( *pIdx ) &&
                         SFX_ITEM_SET == pAttrSet->GetItemState( *pIdx, sal_True, &pItem ) )
                        static_cast<SwCntntNode *>(pTmpNd)->SetAttr(*pItem);
                    ++pIdx;
                }
            }
            // <--

			new SwEndNode( aIdx, *pSttNd );
		}
		if ( nL + 1 >= nRepeat )
            pTxtColl = pCntntTxtColl;
	}
	return pTblNd;
}


//---------------- Text -> Tabelle -----------------------

const SwTable* SwDoc::TextToTable( const SwInsertTableOptions& rInsTblOpts,
                                   const SwPaM& rRange, sal_Unicode cCh,
                                   sal_Int16 eAdjust,
                                   const SwTableAutoFmt* pTAFmt )
{
	// pruefe ob in der Selection eine Tabelle liegt
	const SwPosition *pStt = rRange.Start(), *pEnd = rRange.End();
	{
		sal_uLong nCnt = pStt->nNode.GetIndex();
		for( ; nCnt <= pEnd->nNode.GetIndex(); ++nCnt )
			if( !GetNodes()[ nCnt ]->IsTxtNode() )
				return 0;
	}

	/* #106283# Save first node in the selection if it is a context node. */
	SwCntntNode * pSttCntntNd = pStt->nNode.GetNode().GetCntntNode();

	SwPaM aOriginal( *pStt, *pEnd );
	pStt = aOriginal.GetMark();
	pEnd = aOriginal.GetPoint();

#ifdef DEL_TABLE_REDLINES
	lcl_DelRedlines aDelRedl( aOriginal );
#endif

	SwUndoTxtToTbl* pUndo = 0;
    if( GetIDocumentUndoRedo().DoesUndo() )
    {
        GetIDocumentUndoRedo().StartUndo( UNDO_TEXTTOTABLE, NULL );
        pUndo = new SwUndoTxtToTbl( aOriginal, rInsTblOpts, cCh,
                    static_cast<sal_uInt16>(eAdjust), pTAFmt );
        GetIDocumentUndoRedo().AppendUndo( pUndo );

		// das Splitten vom TextNode nicht in die Undohistory aufnehmen
        GetIDocumentUndoRedo().DoUndo( false );
    }

	::PaMCorrAbs( aOriginal, *pEnd );

	// sorge dafuer, das der Bereich auf Node-Grenzen liegt
	SwNodeRange aRg( pStt->nNode, pEnd->nNode );
	if( pStt->nContent.GetIndex() )
		SplitNode( *pStt, false );

	sal_Bool bEndCntnt = 0 != pEnd->nContent.GetIndex();
	// nicht splitten am Ende der Zeile (aber am Ende vom Doc!!)
	if( bEndCntnt )
	{
		if( pEnd->nNode.GetNode().GetCntntNode()->Len() != pEnd->nContent.GetIndex()
			|| pEnd->nNode.GetIndex() >= GetNodes().GetEndOfContent().GetIndex()-1 )
		{
			SplitNode( *pEnd, false );
			((SwNodeIndex&)pEnd->nNode)--;
			((SwIndex&)pEnd->nContent).Assign(
								pEnd->nNode.GetNode().GetCntntNode(), 0 );
			// ein Node und am Ende ??
			if( pStt->nNode.GetIndex() >= pEnd->nNode.GetIndex() )
				aRg.aStart--;
		}
		else
			aRg.aEnd++;
	}


	if( aRg.aEnd.GetIndex() == aRg.aStart.GetIndex() )
	{
		ASSERT( sal_False, "Kein Bereich" );
		aRg.aEnd++;
	}

	// Wir gehen jetzt immer ueber die Upper, um die Tabelle einzufuegen:
	SwNode2Layout aNode2Layout( aRg.aStart.GetNode() );

    GetIDocumentUndoRedo().DoUndo( 0 != pUndo );

	// dann erstelle die Box/Line/Table-Struktur
	SwTableBoxFmt* pBoxFmt = MakeTableBoxFmt();
	SwTableLineFmt* pLineFmt = MakeTableLineFmt();
	SwTableFmt* pTableFmt = MakeTblFrmFmt( GetUniqueTblName(), GetDfltFrmFmt() );

	// alle Zeilen haben die Fill-Order von links nach rechts !
    pLineFmt->SetFmtAttr( SwFmtFillOrder( ATT_LEFT_TO_RIGHT ));
	// die Tabelle bekommt USHRT_MAX als default SSize
    pTableFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, USHRT_MAX ));
    if( !(rInsTblOpts.mnInsMode & tabopts::SPLIT_LAYOUT) )
        pTableFmt->SetFmtAttr( SwFmtLayoutSplit( sal_False ));

	/* #106283# If the first node in the selection is a context node and if it
       has an item FRAMEDIR set (no default) propagate the item to the
       replacing table. */
	if (pSttCntntNd)
	{
		const SwAttrSet & aNdSet = pSttCntntNd->GetSwAttrSet();
		const SfxPoolItem *pItem = NULL;

		if (SFX_ITEM_SET == aNdSet.GetItemState( RES_FRAMEDIR, sal_True, &pItem )
			&& pItem != NULL)
		{
            pTableFmt->SetFmtAttr( *pItem );
		}
	}

    SwTableNode* pTblNd = GetNodes().TextToTable(
            aRg, cCh, pTableFmt, pLineFmt, pBoxFmt,
            GetTxtCollFromPool( RES_POOLCOLL_STANDARD ), pUndo );

	SwTable * pNdTbl = &pTblNd->GetTable();
	ASSERT( pNdTbl, "kein Tabellen-Node angelegt."  )

    const sal_uInt16 nRowsToRepeat =
            tabopts::HEADLINE == (rInsTblOpts.mnInsMode & tabopts::HEADLINE) ?
            rInsTblOpts.mnRowsToRepeat :
            0;
    pNdTbl->SetRowsToRepeat( nRowsToRepeat );

	sal_Bool bUseBoxFmt = sal_False;
	if( !pBoxFmt->GetDepends() )
	{
		// die Formate an den Boxen haben schon die richtige Size, es darf
		// also nur noch die richtige Umrandung/AutoFmt gesetzt werden.
		bUseBoxFmt = sal_True;
        pTableFmt->SetFmtAttr( pBoxFmt->GetFrmSize() );
		delete pBoxFmt;
        eAdjust = text::HoriOrientation::NONE;
	}

	//Orientation am Fmt der Table setzen
    pTableFmt->SetFmtAttr( SwFmtHoriOrient( 0, eAdjust ) );
    pNdTbl->RegisterToFormat( *pTableFmt );

    if( pTAFmt || ( rInsTblOpts.mnInsMode & tabopts::DEFAULT_BORDER) )
	{
		sal_uInt8 nBoxArrLen = pTAFmt ? 16 : 4;
		SvPtrarr aBoxFmtArr( nBoxArrLen, 0 );
		{
			for( sal_uInt8 i = 0; i < nBoxArrLen; ++i )
				aBoxFmtArr.Insert( (void*)0, i );
		}

        // --> OD 2008-02-25 #refactorlists#
//        SfxItemSet aCharSet( GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_END-1 );
        SfxItemSet aCharSet( GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_LIST_END-1 );
        // <--
		SwHistory* pHistory = pUndo ? &pUndo->GetHistory() : 0;

        SwTableBoxFmt *pBoxF = 0;
		SwTableLines& rLines = pNdTbl->GetTabLines();
		sal_uInt16 nRows = rLines.Count();
		for( sal_uInt16 n = 0; n < nRows; ++n )
		{
			SwTableBoxes& rBoxes = rLines[ n ]->GetTabBoxes();
			sal_uInt16 nCols = rBoxes.Count();
			for( sal_uInt16 i = 0; i < nCols; ++i )
			{
				SwTableBox* pBox = rBoxes[ i ];
				sal_Bool bChgSz = sal_False;

				if( pTAFmt )
				{
					sal_uInt8 nId = static_cast<sal_uInt8>(!n ? 0 : (( n+1 == nRows )
											? 12 : (4 * (1 + ((n-1) & 1 )))));
					nId = nId + static_cast<sal_uInt8>(!i ? 0 :
                                ( i+1 == nCols ? 3 : (1 + ((i-1) & 1))));
					if( bUseBoxFmt )
						::lcl_SetDfltBoxAttr( *pBox, aBoxFmtArr, nId, pTAFmt );
					else
					{
						bChgSz = 0 == aBoxFmtArr[ nId ];
						pBoxF = ::lcl_CreateAFmtBoxFmt( *this, aBoxFmtArr,
												*pTAFmt, USHRT_MAX, nId );
					}

					// ggfs. noch die Absatz/ZeichenAttribute setzen
					if( pTAFmt->IsFont() || pTAFmt->IsJustify() )
					{
						aCharSet.ClearItem();
						pTAFmt->UpdateToSet( nId, aCharSet,
											SwTableAutoFmt::UPDATE_CHAR, 0 );
						if( aCharSet.Count() )
						{
							sal_uLong nSttNd = pBox->GetSttIdx()+1;
							sal_uLong nEndNd = pBox->GetSttNd()->EndOfSectionIndex();
							for( ; nSttNd < nEndNd; ++nSttNd )
							{
								SwCntntNode* pNd = GetNodes()[ nSttNd ]->GetCntntNode();
								if( pNd )
								{
									if( pHistory )
									{
										SwRegHistory aReg( pNd, *pNd, pHistory );
										pNd->SetAttr( aCharSet );
									}
									else
										pNd->SetAttr( aCharSet );
								}
							}
						}
					}
				}
				else
				{
					sal_uInt8 nId = (i < nCols - 1 ? 0 : 1) + (n ? 2 : 0 );
					if( bUseBoxFmt )
						::lcl_SetDfltBoxAttr( *pBox, aBoxFmtArr, nId );
					else
					{
						bChgSz = 0 == aBoxFmtArr[ nId ];
						pBoxF = ::lcl_CreateDfltBoxFmt( *this, aBoxFmtArr,
														USHRT_MAX, nId );
					}
				}

				if( !bUseBoxFmt )
				{
					if( bChgSz )
                        pBoxF->SetFmtAttr( pBox->GetFrmFmt()->GetFrmSize() );
					pBox->ChgFrmFmt( pBoxF );
				}
			}
		}

		if( bUseBoxFmt )
		{
			for( sal_uInt8 i = 0; i < nBoxArrLen; ++i )
			{
				SvPtrarr* pArr = (SvPtrarr*)aBoxFmtArr[ i ];
				delete pArr;
			}
		}
	}

	// JP 03.04.97: Inhalt der Boxen auf Zahlen abpruefen
	if( IsInsTblFormatNum() )
	{
		for( sal_uInt16 nBoxes = pNdTbl->GetTabSortBoxes().Count(); nBoxes; )
			ChkBoxNumFmt( *pNdTbl->GetTabSortBoxes()[ --nBoxes ], sal_False );
	}

	sal_uLong nIdx = pTblNd->GetIndex();
	aNode2Layout.RestoreUpperFrms( GetNodes(), nIdx, nIdx + 1 );

	{
		SwPaM& rTmp = (SwPaM&)rRange;	// Point immer an den Anfang
		rTmp.DeleteMark();
		rTmp.GetPoint()->nNode = *pTblNd;
		SwCntntNode* pCNd = GetNodes().GoNext( &rTmp.GetPoint()->nNode );
		rTmp.GetPoint()->nContent.Assign( pCNd, 0 );
	}

	if( pUndo )
    {
        GetIDocumentUndoRedo().EndUndo( UNDO_TEXTTOTABLE, NULL );
    }

	SetModified();
	SetFieldsDirty(true, NULL, 0);
	return pNdTbl;
}

SwTableNode* SwNodes::TextToTable( const SwNodeRange& rRange, sal_Unicode cCh,
									SwTableFmt* pTblFmt,
									SwTableLineFmt* pLineFmt,
									SwTableBoxFmt* pBoxFmt,
									SwTxtFmtColl* pTxtColl,
									SwUndoTxtToTbl* pUndo )
{
	if( rRange.aStart >= rRange.aEnd )
		return 0;

	SwTableNode * pTblNd = new SwTableNode( rRange.aStart );
	new SwEndNode( rRange.aEnd, *pTblNd );

	SwDoc* pDoc = GetDoc();
	SvUShorts aPosArr( 0, 16 );
	SwTable * pTable = &pTblNd->GetTable();
	SwTableLine* pLine;
	SwTableBox* pBox;
	sal_uInt16 nBoxes, nLines, nMaxBoxes = 0;

	SwNodeIndex aSttIdx( *pTblNd, 1 );
	SwNodeIndex aEndIdx( rRange.aEnd, -1 );
	for( nLines = 0, nBoxes = 0;
		aSttIdx.GetIndex() < aEndIdx.GetIndex();
		aSttIdx += 2, nLines++, nBoxes = 0 )
	{
		SwTxtNode* pTxtNd = aSttIdx.GetNode().GetTxtNode();
		ASSERT( pTxtNd, "nur TextNodes in der Tabelle aufnehmen" );

		if( !nLines && 0x0b == cCh )
		{
			cCh = 0x09;

			// JP 28.10.96: vom 1. Node die Positionen des Trenners besorgen,
			//				damit die Boxen entsprechend eingestellt werden
			SwTxtFrmInfo aFInfo( (SwTxtFrm*)pTxtNd->getLayoutFrm( pTxtNd->GetDoc()->GetCurrentLayout() ) );
			if( aFInfo.IsOneLine() )		// nur dann sinnvoll!
			{
				const sal_Unicode* pTxt = pTxtNd->GetTxt().GetBuffer();
				for( xub_StrLen nChPos = 0; *pTxt; ++nChPos, ++pTxt )
                {
					if( *pTxt == cCh )
					{
						aPosArr.Insert( static_cast<sal_uInt16>(
                                        aFInfo.GetCharPos( nChPos+1, sal_False )),
										aPosArr.Count() );
					}
                }

				aPosArr.Insert( /*aFInfo.GetFrm()->Frm().Left() +*/
                                static_cast<sal_uInt16>(aFInfo.GetFrm()->IsVertical() ?
                                aFInfo.GetFrm()->Prt().Bottom() :
                                aFInfo.GetFrm()->Prt().Right()),
								aPosArr.Count() );
			}
		}

		// die alten Frames loeschen, es werden neue erzeugt
		pTxtNd->DelFrms();

		// PageBreaks/PageDesc/ColBreak rausschmeissen.
        const SfxItemSet* pSet = pTxtNd->GetpSwAttrSet();
		if( pSet )
		{
// das entfernen der PageBreaks erst nach dem erzeugen der Tabelle
// erfolgen, denn sonst stehen sie falsch in der History !!!
//			SwRegHistory aRegH( pTxtNd, *pTxtNd, pHistory );
			const SfxPoolItem* pItem;
			if( SFX_ITEM_SET == pSet->GetItemState( RES_BREAK, sal_False, &pItem ) )
			{
				if( !nLines )
                    pTblFmt->SetFmtAttr( *pItem );
                pTxtNd->ResetAttr( RES_BREAK );
                pSet = pTxtNd->GetpSwAttrSet();
			}

			if( pSet && SFX_ITEM_SET == pSet->GetItemState(
				RES_PAGEDESC, sal_False, &pItem ) &&
				((SwFmtPageDesc*)pItem)->GetPageDesc() )
			{
				if( !nLines )
                    pTblFmt->SetFmtAttr( *pItem );
                pTxtNd->ResetAttr( RES_PAGEDESC );
			}
		}

		// setze den bei allen TextNode in der Tabelle den TableNode
		// als StartNode
		pTxtNd->pStartOfSection = pTblNd;

		pLine = new SwTableLine( pLineFmt, 1, 0 );
		pTable->GetTabLines().C40_INSERT( SwTableLine, pLine, nLines );

		SwStartNode* pSttNd;
		SwPosition aCntPos( aSttIdx, SwIndex( pTxtNd ));

		SvULongs aBkmkArr( 15, 15 );
		_SaveCntntIdx( pDoc, aSttIdx.GetIndex(), pTxtNd->GetTxt().Len(), aBkmkArr );

		const sal_Unicode* pTxt = pTxtNd->GetTxt().GetBuffer();

		if( T2T_PARA != cCh )
			for( xub_StrLen nChPos = 0; *pTxt; ++nChPos, ++pTxt )
				if( *pTxt == cCh )
				{
					aCntPos.nContent = nChPos;
                    SwCntntNode* pNewNd = pTxtNd->SplitCntntNode( aCntPos );

					if( aBkmkArr.Count() )
						_RestoreCntntIdx( aBkmkArr, *pNewNd, nChPos,
											nChPos + 1 );

					// Trennzeichen loeschen und SuchString korrigieren
                    pTxtNd->EraseText( aCntPos.nContent, 1 );
					pTxt = pTxtNd->GetTxt().GetBuffer();
					nChPos = 0;
					--nChPos, --pTxt;           // for the ++ in the for loop !!!

					// setze bei allen TextNodes in der Tabelle den TableNode
					// als StartNode
					const SwNodeIndex aTmpIdx( aCntPos.nNode, -1 );
					pSttNd = new SwStartNode( aTmpIdx, ND_STARTNODE,
												SwTableBoxStartNode );
					new SwEndNode( aCntPos.nNode, *pSttNd );
					pNewNd->pStartOfSection = pSttNd;

					// Section der Box zuweisen
					pBox = new SwTableBox( pBoxFmt, *pSttNd, pLine );
					pLine->GetTabBoxes().C40_INSERT( SwTableBox, pBox, nBoxes++ );
				}

		// und jetzt den letzten Teil-String
		if( aBkmkArr.Count() )
			_RestoreCntntIdx( aBkmkArr, *pTxtNd, pTxtNd->GetTxt().Len(),
								pTxtNd->GetTxt().Len()+1 );

		pSttNd = new SwStartNode( aCntPos.nNode, ND_STARTNODE, SwTableBoxStartNode );
		const SwNodeIndex aTmpIdx( aCntPos.nNode, 1 );
		new SwEndNode( aTmpIdx, *pSttNd  );
		pTxtNd->pStartOfSection = pSttNd;

		pBox = new SwTableBox( pBoxFmt, *pSttNd, pLine );
		pLine->GetTabBoxes().C40_INSERT( SwTableBox, pBox, nBoxes++ );
		if( nMaxBoxes < nBoxes )
			nMaxBoxes = nBoxes;
	}

	// die Tabelle ausgleichen, leere Sections einfuegen
	sal_uInt16 n;

	for( n = 0; n < pTable->GetTabLines().Count(); ++n )
	{
		SwTableLine* pCurrLine = pTable->GetTabLines()[ n ];
		if( nMaxBoxes != ( nBoxes = pCurrLine->GetTabBoxes().Count() ))
		{
			InsBoxen( pTblNd, pCurrLine, pBoxFmt, pTxtColl, 0,
						nBoxes, nMaxBoxes - nBoxes );

			if( pUndo )
				for( sal_uInt16 i = nBoxes; i < nMaxBoxes; ++i )
					pUndo->AddFillBox( *pCurrLine->GetTabBoxes()[ i ] );

			// fehlen der 1. Line Boxen, dann kann man das Breiten Array
			// vergessen!
			if( !n )
				aPosArr.Remove( 0, aPosArr.Count() );
		}
	}

	if( aPosArr.Count() )
	{
		SwTableLines& rLns = pTable->GetTabLines();
		sal_uInt16 nLastPos = 0;
		for( n = 0; n < aPosArr.Count(); ++n )
		{
			SwTableBoxFmt *pNewFmt = pDoc->MakeTableBoxFmt();
            pNewFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
												aPosArr[ n ] - nLastPos ));
			for( sal_uInt16 nTmpLine = 0; nTmpLine < rLns.Count(); ++nTmpLine )
				//JP 24.06.98: hier muss ein Add erfolgen, da das BoxFormat
				//				von der rufenden Methode noch gebraucht wird!
				pNewFmt->Add( rLns[ nTmpLine ]->GetTabBoxes()[ n ] );

			nLastPos = aPosArr[ n ];
		}

		// damit die Tabelle die richtige Groesse bekommt, im BoxFormat die
		// Groesse nach "oben" transportieren.
		ASSERT( !pBoxFmt->GetDepends(), "wer ist in dem Format noch angemeldet" );
        pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, nLastPos ));
	}
	else
        pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, USHRT_MAX / nMaxBoxes ));

	// das wars doch wohl ??
	return pTblNd;
}
/*-- 18.05.2006 10:30:29---------------------------------------------------

  -----------------------------------------------------------------------*/
const SwTable* SwDoc::TextToTable( const std::vector< std::vector<SwNodeRange> >& rTableNodes )
{
    /* #106283# Save first node in the selection if it is a content node. */
    SwCntntNode * pSttCntntNd = rTableNodes.begin()->begin()->aStart.GetNode().GetCntntNode();

    /**debug**/
#if OSL_DEBUG_LEVEL > 1
    const SwNodeRange& rStartRange = *rTableNodes.begin()->begin();
    const SwNodeRange& rEndRange = *rTableNodes.rbegin()->rbegin();
    (void) rStartRange;
    (void) rEndRange;
#endif
    /**debug**/

    //!!! not necessarily TextNodes !!!
    SwPaM aOriginal( rTableNodes.begin()->begin()->aStart, rTableNodes.rbegin()->rbegin()->aEnd );
    const SwPosition *pStt = aOriginal.GetMark();
    const SwPosition *pEnd = aOriginal.GetPoint();

#ifdef DEL_TABLE_REDLINES
    lcl_DelRedlines aDelRedl( aOriginal );
#endif

//    SwUndoTxtToTbl* pUndo = 0;
    bool const bUndo(GetIDocumentUndoRedo().DoesUndo());
    if (bUndo)
    {
        // das Splitten vom TextNode nicht in die Undohistory aufnehmen
        GetIDocumentUndoRedo().DoUndo(false);
    }

    ::PaMCorrAbs( aOriginal, *pEnd );

    // sorge dafuer, das der Bereich auf Node-Grenzen liegt
    SwNodeRange aRg( pStt->nNode, pEnd->nNode );
    if( pStt->nContent.GetIndex() )
        SplitNode( *pStt, false );

    sal_Bool bEndCntnt = 0 != pEnd->nContent.GetIndex();
    // nicht splitten am Ende der Zeile (aber am Ende vom Doc!!)
    if( bEndCntnt )
    {
        if( pEnd->nNode.GetNode().GetCntntNode()->Len() != pEnd->nContent.GetIndex()
            || pEnd->nNode.GetIndex() >= GetNodes().GetEndOfContent().GetIndex()-1 )
        {
            SplitNode( *pEnd, false );
            ((SwNodeIndex&)pEnd->nNode)--;
            ((SwIndex&)pEnd->nContent).Assign(
                                pEnd->nNode.GetNode().GetCntntNode(), 0 );
            // ein Node und am Ende ??
            if( pStt->nNode.GetIndex() >= pEnd->nNode.GetIndex() )
                aRg.aStart--;
        }
        else
            aRg.aEnd++;
    }


    if( aRg.aEnd.GetIndex() == aRg.aStart.GetIndex() )
    {
        ASSERT( sal_False, "Kein Bereich" );
        aRg.aEnd++;
    }

    // Wir gehen jetzt immer ueber die Upper, um die Tabelle einzufuegen:
    SwNode2Layout aNode2Layout( aRg.aStart.GetNode() );

    GetIDocumentUndoRedo().DoUndo(bUndo);

    // dann erstelle die Box/Line/Table-Struktur
    SwTableBoxFmt* pBoxFmt = MakeTableBoxFmt();
    SwTableLineFmt* pLineFmt = MakeTableLineFmt();
    SwTableFmt* pTableFmt = MakeTblFrmFmt( GetUniqueTblName(), GetDfltFrmFmt() );

    // alle Zeilen haben die Fill-Order von links nach rechts !
    pLineFmt->SetFmtAttr( SwFmtFillOrder( ATT_LEFT_TO_RIGHT ));
    // die Tabelle bekommt USHRT_MAX als default SSize
    pTableFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, USHRT_MAX ));

    /* #106283# If the first node in the selection is a context node and if it
       has an item FRAMEDIR set (no default) propagate the item to the
       replacing table. */
    if (pSttCntntNd)
    {
        const SwAttrSet & aNdSet = pSttCntntNd->GetSwAttrSet();
        const SfxPoolItem *pItem = NULL;

        if (SFX_ITEM_SET == aNdSet.GetItemState( RES_FRAMEDIR, sal_True, &pItem )
            && pItem != NULL)
        {
            pTableFmt->SetFmtAttr( *pItem );
        }
    }

    SwTableNode* pTblNd = GetNodes().TextToTable(
            rTableNodes, pTableFmt, pLineFmt, pBoxFmt,
            GetTxtCollFromPool( RES_POOLCOLL_STANDARD )/*, pUndo*/ );

    SwTable * pNdTbl = &pTblNd->GetTable();
    ASSERT( pNdTbl, "kein Tabellen-Node angelegt."  )
    pNdTbl->RegisterToFormat( *pTableFmt );

    sal_Bool bUseBoxFmt = sal_False;
    if( !pBoxFmt->GetDepends() )
    {
        // die Formate an den Boxen haben schon die richtige Size, es darf
        // also nur noch die richtige Umrandung/AutoFmt gesetzt werden.
        bUseBoxFmt = sal_True;
        pTableFmt->SetFmtAttr( pBoxFmt->GetFrmSize() );
        delete pBoxFmt;
    }

    sal_uLong nIdx = pTblNd->GetIndex();
    aNode2Layout.RestoreUpperFrms( GetNodes(), nIdx, nIdx + 1 );

    SetModified();
    SetFieldsDirty( true, NULL, 0 );
    return pNdTbl;
}

SwNodeRange * SwNodes::ExpandRangeForTableBox(const SwNodeRange & rRange)
{
    SwNodeRange * pResult = NULL;
    bool bChanged = false;
    
	SwNodeIndex aNewStart = rRange.aStart;
	SwNodeIndex aNewEnd = rRange.aEnd;
	
	SwNodeIndex aEndIndex = rRange.aEnd;
	SwNodeIndex aIndex = rRange.aStart;
	
	while (aIndex < aEndIndex)
	{
		SwNode& rNode = aIndex.GetNode();
		
		if (rNode.IsStartNode())
		{
            // advance aIndex to the end node of this start node
            SwNode * pEndNode = rNode.EndOfSectionNode();
            aIndex = *pEndNode;
			
            if (aIndex > aNewEnd)
            {
                aNewEnd = aIndex;
                bChanged = true;
            }
		}
		else if (rNode.IsEndNode())
		{
            SwNode * pStartNode = rNode.StartOfSectionNode();
			SwNodeIndex aStartIndex = *pStartNode;
			
			if (aStartIndex < aNewStart)
            {
				aNewStart = aStartIndex;
                bChanged = true;
            }
		}
		
		if (aIndex < aEndIndex)
			++aIndex;	
	}
    
    SwNode * pNode = &aIndex.GetNode();
    while (pNode->IsEndNode())
    {
        SwNode * pStartNode = pNode->StartOfSectionNode();
        SwNodeIndex aStartIndex(*pStartNode);
        aNewStart = aStartIndex;        
        aNewEnd = aIndex;
        bChanged = true;
        
        ++aIndex;
        pNode = &aIndex.GetNode();
    }
    
    if (bChanged)
        pResult = new SwNodeRange(aNewStart, aNewEnd);
    
    return pResult;
}

/*-- 18.05.2006 08:23:28---------------------------------------------------

  -----------------------------------------------------------------------*/
SwTableNode* SwNodes::TextToTable( const SwNodes::TableRanges_t & rTableNodes,
                                    SwTableFmt* pTblFmt,
                                    SwTableLineFmt* pLineFmt,
                                    SwTableBoxFmt* pBoxFmt,
                                    SwTxtFmtColl* /*pTxtColl*/  /*, SwUndo... pUndo*/  )
{
    if( !rTableNodes.size() )
        return 0;

    SwTableNode * pTblNd = new SwTableNode( rTableNodes.begin()->begin()->aStart );
    //insert the end node after the last text node
   SwNodeIndex aInsertIndex( rTableNodes.rbegin()->rbegin()->aEnd );
   ++aInsertIndex;

   //!! owner ship will be transferred in c-tor to SwNodes array.
   //!! Thus no real problem here...
   new SwEndNode( aInsertIndex, *pTblNd );

#if OSL_DEBUG_LEVEL > 1
    /**debug**/
    const SwNodeRange& rStartRange = *rTableNodes.begin()->begin();
    const SwNodeRange& rEndRange = *rTableNodes.rbegin()->rbegin();
    (void) rStartRange;
    (void) rEndRange;
    /**debug**/
#endif

    SwDoc* pDoc = GetDoc();
    SvUShorts aPosArr( 0, 16 );
    SwTable * pTable = &pTblNd->GetTable();
    SwTableLine* pLine;
    SwTableBox* pBox;
    sal_uInt16 nBoxes, nLines, nMaxBoxes = 0;

//    SwHistory* pHistory = pUndo ? &pUndo->GetHistory() : 0;


    SwNodeIndex aNodeIndex = rTableNodes.begin()->begin()->aStart;
    // delete frames of all contained content nodes
    for( nLines = 0; aNodeIndex <= rTableNodes.rbegin()->rbegin()->aEnd; ++aNodeIndex,++nLines )
    {
        SwNode& rNode = aNodeIndex.GetNode();
        if( rNode.IsCntntNode() )
        {
            static_cast<SwCntntNode&>(rNode).DelFrms();
            if(rNode.IsTxtNode())
            {
                SwTxtNode& rTxtNode = static_cast<SwTxtNode&>(rNode);
                // setze den bei allen TextNode in der Tabelle den TableNode
                // als StartNode
// FIXME: this is setting wrong node StartOfSections in nested tables.
//                rTxtNode.pStartOfSection = pTblNd;
                // remove PageBreaks/PageDesc/ColBreak
                const SwAttrSet* pSet = rTxtNode.GetpSwAttrSet();
                if( pSet )
                {
        // das entfernen der PageBreaks erst nach dem erzeugen der Tabelle
        // erfolgen, denn sonst stehen sie falsch in der History !!!
        //          SwRegHistory aRegH( pTxtNd, *pTxtNd, pHistory );
                    const SfxPoolItem* pItem;
                    if( SFX_ITEM_SET == pSet->GetItemState( RES_BREAK, sal_False, &pItem ) )
                    {
                        if( !nLines )
                            pTblFmt->SetFmtAttr( *pItem );
                        rTxtNode.ResetAttr( RES_BREAK );
                        pSet = rTxtNode.GetpSwAttrSet();
                    }

                    if( pSet && SFX_ITEM_SET == pSet->GetItemState(
                        RES_PAGEDESC, sal_False, &pItem ) &&
                        ((SwFmtPageDesc*)pItem)->GetPageDesc() )
                    {
                        if( !nLines )
                            pTblFmt->SetFmtAttr( *pItem );
                        rTxtNode.ResetAttr( RES_PAGEDESC );
                    }
                }
            }
        }
    }

//    SwNodeIndex aSttIdx( *pTblNd, 1 );
//    SwNodeIndex aEndIdx( rlNodes.rbegin()->aEnd, -1 );
    std::vector<std::vector < SwNodeRange > >::const_iterator aRowIter = rTableNodes.begin();
    for( nLines = 0, nBoxes = 0;
        aRowIter != rTableNodes.end();
        ++aRowIter, /*aSttIdx += 2, */nLines++, nBoxes = 0 )
    {
//        SwTxtNode* pTxtNd = aSttIdx.GetNode().GetTxtNode();
//        ASSERT( pTxtNd, "nur TextNodes in der Tabelle aufnehmen" );

        pLine = new SwTableLine( pLineFmt, 1, 0 );
        pTable->GetTabLines().C40_INSERT( SwTableLine, pLine, nLines );

//        SwStartNode* pSttNd;
//        SwPosition aCntPos( aSttIdx, SwIndex( pTxtNd ));

        std::vector< SwNodeRange >::const_iterator aCellIter = aRowIter->begin();
//        SvULongs aBkmkArr( 15, 15 );
//        _SaveCntntIdx( pDoc, aCellIter->aStart.GetIndex(), pTxtNd->GetTxt().Len(), aBkmkArr );
//        const sal_Unicode* pTxt = pTxtNd->GetTxt().GetBuffer();

        for( ; aCellIter != aRowIter->end(); ++aCellIter )
        {
//            aCellIter->aStart aCellIter->aEnd
//                aCntPos.nContent = nChPos;
//                SwCntntNode* pNewNd = pTxtNd->SplitNode( aCntPos );

//        auch f?rs undo?
//                if( aBkmkArr.Count() )
//                    _RestoreCntntIdx( aBkmkArr, *pNewNd, nChPos,
//                                        nChPos + 1 );

                const SwNodeIndex aTmpIdx( aCellIter->aStart, 0 );

               SwNodeIndex aCellEndIdx(aCellIter->aEnd);
               ++aCellEndIdx;
               SwStartNode* pSttNd = new SwStartNode( aTmpIdx, ND_STARTNODE,
                                            SwTableBoxStartNode );
                new SwEndNode( aCellEndIdx, *pSttNd );
                //set the start node on all node of the current cell
                SwNodeIndex aCellNodeIdx = aCellIter->aStart;
                for(;aCellNodeIdx <= aCellIter->aEnd; ++aCellNodeIdx )
                {
                    aCellNodeIdx.GetNode().pStartOfSection = pSttNd;
                    //skip start/end node pairs
                    if( aCellNodeIdx.GetNode().IsStartNode() )
                        aCellNodeIdx = SwNodeIndex( *aCellNodeIdx.GetNode().EndOfSectionNode() );
                }

                // Section der Box zuweisen
                pBox = new SwTableBox( pBoxFmt, *pSttNd, pLine );
                pLine->GetTabBoxes().C40_INSERT( SwTableBox, pBox, nBoxes++ );
        }
        if( nMaxBoxes < nBoxes )
            nMaxBoxes = nBoxes;
    }

    // die Tabelle ausgleichen, leere Sections einfuegen
    sal_uInt16 n;

    if( aPosArr.Count() )
    {
        SwTableLines& rLns = pTable->GetTabLines();
        sal_uInt16 nLastPos = 0;
        for( n = 0; n < aPosArr.Count(); ++n )
        {
            SwTableBoxFmt *pNewFmt = pDoc->MakeTableBoxFmt();
            pNewFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
                                                aPosArr[ n ] - nLastPos ));
            for( sal_uInt16 nLines2 = 0; nLines2 < rLns.Count(); ++nLines2 )
                //JP 24.06.98: hier muss ein Add erfolgen, da das BoxFormat
                //              von der rufenden Methode noch gebraucht wird!
                pNewFmt->Add( rLns[ nLines2 ]->GetTabBoxes()[ n ] );

            nLastPos = aPosArr[ n ];
        }

        // damit die Tabelle die richtige Groesse bekommt, im BoxFormat die
        // Groesse nach "oben" transportieren.
        ASSERT( !pBoxFmt->GetDepends(), "wer ist in dem Format noch angemeldet" );
        pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, nLastPos ));
    }
    else
        pBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, USHRT_MAX / nMaxBoxes ));

    // das wars doch wohl ??
    return pTblNd;
}


//---------------- Tabelle -> Text -----------------------


sal_Bool SwDoc::TableToText( const SwTableNode* pTblNd, sal_Unicode cCh )
{
	if( !pTblNd )
		return sal_False;

    // --> FME 2004-09-28 #i34471#
    // If this is trigged by SwUndoTblToTxt::Repeat() nobody ever deleted
    // the table cursor.
    SwEditShell* pESh = GetEditShell();
    if( pESh && pESh->IsTableMode() )
        pESh->ClearMark();
    // <--

#ifdef DEL_TABLE_REDLINES
    lcl_DelRedlines aDelRedl( *pTblNd, sal_False );
#endif

	SwNodeRange aRg( *pTblNd, 0, *pTblNd->EndOfSectionNode() );
	SwUndoTblToTxt* pUndo = 0;
	SwNodeRange* pUndoRg = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
        GetIDocumentUndoRedo().ClearRedo();
		pUndoRg = new SwNodeRange( aRg.aStart, -1, aRg.aEnd, +1 );
		pUndo = new SwUndoTblToTxt( pTblNd->GetTable(), cCh );
	}

	SwTableFmlUpdate aMsgHnt( &pTblNd->GetTable() );
	aMsgHnt.eFlags = TBL_BOXNAME;
	UpdateTblFlds( &aMsgHnt );

	sal_Bool bRet = GetNodes().TableToText( aRg, cCh, pUndo );
	if( pUndoRg )
	{
		pUndoRg->aStart++;
		pUndoRg->aEnd--;
		pUndo->SetRange( *pUndoRg );
        GetIDocumentUndoRedo().AppendUndo(pUndo);
		delete pUndoRg;
	}

	if( bRet )
		SetModified();

	return bRet;
}

// -- benutze die ForEach Methode vom PtrArray um aus einer Tabelle wieder
//		Text zuerzeugen. (Die Boxen koennen auch noch Lines enthalten !!)
struct _DelTabPara
{
	SwTxtNode* pLastNd;
	SwNodes& rNds;
	SwUndoTblToTxt* pUndo;
	sal_Unicode cCh;

	_DelTabPara( SwNodes& rNodes, sal_Unicode cChar, SwUndoTblToTxt* pU ) :
		pLastNd(0), rNds( rNodes ), pUndo( pU ), cCh( cChar ) {}
	_DelTabPara( const _DelTabPara& rPara ) :
		pLastNd(rPara.pLastNd), rNds( rPara.rNds ),
		pUndo( rPara.pUndo ), cCh( rPara.cCh ) {}
};

// forward deklarieren damit sich die Lines und Boxen rekursiv aufrufen
// koennen.
sal_Bool lcl_DelBox( const SwTableBox*&, void *pPara );

sal_Bool lcl_DelLine( const SwTableLine*& rpLine, void* pPara )
{
	ASSERT( pPara, "die Parameter fehlen" );
	_DelTabPara aPara( *(_DelTabPara*)pPara );
	((SwTableLine*&)rpLine)->GetTabBoxes().ForEach( &lcl_DelBox, &aPara );
	if( rpLine->GetUpper() )		// gibt es noch eine uebergeordnete Box ??
		// dann gebe den letzten TextNode zurueck
		((_DelTabPara*)pPara)->pLastNd = aPara.pLastNd;
	return sal_True;
}


sal_Bool lcl_DelBox( const SwTableBox*& rpBox, void* pPara )
{
	ASSERT( pPara, "die Parameter fehlen" );

	// loesche erstmal die Lines der Box
	_DelTabPara* pDelPara = (_DelTabPara*)pPara;
	if( rpBox->GetTabLines().Count() )
		((SwTableBox*&)rpBox)->GetTabLines().ForEach( &lcl_DelLine, pDelPara );
	else
	{
		SwDoc* pDoc = pDelPara->rNds.GetDoc();
		SwNodeRange aDelRg( *rpBox->GetSttNd(), 0,
							*rpBox->GetSttNd()->EndOfSectionNode() );
		// loesche die Section
		pDelPara->rNds.SectionUp( &aDelRg );
		const SwTxtNode* pCurTxtNd;
		if( T2T_PARA != pDelPara->cCh && pDelPara->pLastNd &&
			0 != ( pCurTxtNd = aDelRg.aStart.GetNode().GetTxtNode() ))
		{
			// Join the current text node with the last from the previous box if possible
			sal_uLong nNdIdx = aDelRg.aStart.GetIndex();
			aDelRg.aStart--;
			if( pDelPara->pLastNd == &aDelRg.aStart.GetNode() )
			{
                // Inserting the seperator
                SwIndex aCntIdx( pDelPara->pLastNd, pDelPara->pLastNd->GetTxt().Len());
                pDelPara->pLastNd->InsertText( pDelPara->cCh, aCntIdx,
                    IDocumentContentOperations::INS_EMPTYEXPAND );
				if( pDelPara->pUndo )
					pDelPara->pUndo->AddBoxPos( *pDoc, nNdIdx, aDelRg.aEnd.GetIndex(),
												aCntIdx.GetIndex() );

				SvULongs aBkmkArr( 4, 4 );
				xub_StrLen nOldTxtLen = aCntIdx.GetIndex();
				_SaveCntntIdx( pDoc, nNdIdx, pCurTxtNd->GetTxt().Len(),
								aBkmkArr );

				pDelPara->pLastNd->JoinNext();

				if( aBkmkArr.Count() )
					_RestoreCntntIdx( pDoc, aBkmkArr,
										pDelPara->pLastNd->GetIndex(),
										nOldTxtLen );
			}
			else if( pDelPara->pUndo )
            {
                aDelRg.aStart++;
				pDelPara->pUndo->AddBoxPos( *pDoc, nNdIdx, aDelRg.aEnd.GetIndex() );
            }
		}
		else if( pDelPara->pUndo )
			pDelPara->pUndo->AddBoxPos( *pDoc, aDelRg.aStart.GetIndex(), aDelRg.aEnd.GetIndex() );
		aDelRg.aEnd--;
		pDelPara->pLastNd = aDelRg.aEnd.GetNode().GetTxtNode();

		//JP 03.04.97: die Ausrichtung der ZahlenFormatierung auf
		//				keinen Fall uebernehmen
        if( pDelPara->pLastNd && pDelPara->pLastNd->HasSwAttrSet() )
			pDelPara->pLastNd->ResetAttr( RES_PARATR_ADJUST );
	}
	return sal_True;
}


sal_Bool SwNodes::TableToText( const SwNodeRange& rRange, sal_Unicode cCh,
							SwUndoTblToTxt* pUndo )
{
	// ist eine Tabelle selektiert ?
	SwTableNode* pTblNd;
	if( rRange.aStart.GetIndex() >= rRange.aEnd.GetIndex() ||
        0 == ( pTblNd = rRange.aStart.GetNode().GetTableNode()) ||
		&rRange.aEnd.GetNode() != pTblNd->EndOfSectionNode() )
		return sal_False;

	// stand die Tabelle ganz alleine in einer Section ?
	// dann ueber den Upper der Tabelle die Frames anlegen
	SwNode2Layout* pNode2Layout = 0;
	SwNodeIndex aFrmIdx( rRange.aStart );
	SwNode* pFrmNd = FindPrvNxtFrmNode( aFrmIdx, &rRange.aEnd.GetNode() );
	if( !pFrmNd )
		// dann sammel mal alle Uppers ein
		pNode2Layout = new SwNode2Layout( *pTblNd );

	// loesche schon mal die Frames
	pTblNd->DelFrms();

	// dann "loeschen" die Tabellen und fasse alle Lines/Boxen zusammen
	_DelTabPara aDelPara( *this, cCh, pUndo );
	pTblNd->pTable->GetTabLines().ForEach( &lcl_DelLine, &aDelPara );

	// jetzt ist aus jeder TableLine ein TextNode mit dem entsprechenden
	// Trenner erzeugt worden. Es braucht nur noch die Table-Section
	// geloescht und fuer die neuen TextNode die Frames erzeugt werden.
	SwNodeRange aDelRg( rRange.aStart, rRange.aEnd );

	// JP 14.01.97: hat die Tabelle PageDesc-/Break-Attribute? Dann in den
	//				ersten TextNode uebernehmen
	{
// was ist mit UNDO???
		const SfxItemSet& rTblSet = pTblNd->pTable->GetFrmFmt()->GetAttrSet();
		const SfxPoolItem *pBreak, *pDesc;
		if( SFX_ITEM_SET != rTblSet.GetItemState( RES_PAGEDESC, sal_False, &pDesc ))
			pDesc = 0;
		if( SFX_ITEM_SET != rTblSet.GetItemState( RES_BREAK, sal_False, &pBreak ))
			pBreak = 0;

		if( pBreak || pDesc )
		{
			SwNodeIndex aIdx( *pTblNd  );
			SwCntntNode* pCNd = GoNext( &aIdx );
			if( pBreak )
				pCNd->SetAttr( *pBreak );
			if( pDesc )
				pCNd->SetAttr( *pDesc );
		}
	}

	SectionUp( &aDelRg );		// loesche die Section und damit die Tabelle
    // #i28006#
    sal_uLong nStt = aDelRg.aStart.GetIndex(), nEnd = aDelRg.aEnd.GetIndex();
	if( !pFrmNd )
	{
		pNode2Layout->RestoreUpperFrms( *this,
						aDelRg.aStart.GetIndex(), aDelRg.aEnd.GetIndex() );
		delete pNode2Layout;
	}
	else
	{
		SwCntntNode *pCNd;
		SwSectionNode *pSNd;
		while( aDelRg.aStart.GetIndex() < nEnd )
		{
			if( 0 != ( pCNd = aDelRg.aStart.GetNode().GetCntntNode()))
			{
				if( pFrmNd->IsCntntNode() )
					((SwCntntNode*)pFrmNd)->MakeFrms( *pCNd );
				else if( pFrmNd->IsTableNode() )
					((SwTableNode*)pFrmNd)->MakeFrms( aDelRg.aStart );
				else if( pFrmNd->IsSectionNode() )
					((SwSectionNode*)pFrmNd)->MakeFrms( aDelRg.aStart );
				pFrmNd = pCNd;
			}
			else if( 0 != ( pSNd = aDelRg.aStart.GetNode().GetSectionNode()))
			{
				if( !pSNd->GetSection().IsHidden() && !pSNd->IsCntntHidden() )
				{
					pSNd->MakeFrms( &aFrmIdx, &aDelRg.aEnd );
					pFrmNd = pSNd;
					break;
				}
				aDelRg.aStart = *pSNd->EndOfSectionNode();
			}
			aDelRg.aStart++;
		}
    }

    // #i28006# Fly frames have to be restored even if the table was
    // #alone in the section
    const SwSpzFrmFmts& rFlyArr = *GetDoc()->GetSpzFrmFmts();
    for( sal_uInt16 n = 0; n < rFlyArr.Count(); ++n )
    {
        SwFrmFmt *const pFmt = (SwFrmFmt*)rFlyArr[n];
        const SwFmtAnchor& rAnchor = pFmt->GetAnchor();
        SwPosition const*const pAPos = rAnchor.GetCntntAnchor();
        if (pAPos &&
            ((FLY_AT_PARA == rAnchor.GetAnchorId()) ||
             (FLY_AT_CHAR == rAnchor.GetAnchorId())) &&
            nStt <= pAPos->nNode.GetIndex() &&
            pAPos->nNode.GetIndex() < nEnd )
        {
            pFmt->MakeFrms();
        }
	}

	return sal_True;
}


// ----- einfuegen von Spalten/Zeilen ------------------------

sal_Bool SwDoc::InsertCol( const SwCursor& rCursor, sal_uInt16 nCnt, sal_Bool bBehind )
{
	if( !::CheckSplitCells( rCursor, nCnt + 1, nsSwTblSearchType::TBLSEARCH_COL ) )
		return sal_False;

	// lasse ueber das Layout die Boxen suchen
	SwSelBoxes aBoxes;
	::GetTblSel( rCursor, aBoxes, nsSwTblSearchType::TBLSEARCH_COL );

	sal_Bool bRet = sal_False;
	if( aBoxes.Count() )
		bRet = InsertCol( aBoxes, nCnt, bBehind );
	return bRet;
}

sal_Bool SwDoc::InsertCol( const SwSelBoxes& rBoxes, sal_uInt16 nCnt, sal_Bool bBehind )
{
	// uebers SwDoc fuer Undo !!
	ASSERT( rBoxes.Count(), "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	SwTable& rTbl = pTblNd->GetTable();
	if( rTbl.ISA( SwDDETable ))
		return sal_False;

#ifdef DEL_TABLE_REDLINES
	lcl_DelRedlines aDelRedl( *pTblNd, sal_True );
#endif

	SwTableSortBoxes aTmpLst( 0, 5 );
	SwUndoTblNdsChg* pUndo = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
		pUndo = new SwUndoTblNdsChg( UNDO_TABLE_INSCOL, rBoxes, *pTblNd,
                                     0, 0, nCnt, bBehind, sal_False );
		aTmpLst.Insert( &rTbl.GetTabSortBoxes(), 0, rTbl.GetTabSortBoxes().Count() );
	}

    bool bRet(false);
    {
        ::sw::UndoGuard const undoGuard(GetIDocumentUndoRedo());

        SwTableFmlUpdate aMsgHnt( &rTbl );
        aMsgHnt.eFlags = TBL_BOXPTR;
        UpdateTblFlds( &aMsgHnt );

        bRet = rTbl.InsertCol( this, rBoxes, nCnt, bBehind );
        if (bRet)
        {
            SetModified();
            ::ClearFEShellTabCols();
            SetFieldsDirty( true, NULL, 0 );
        }
    }

	if( pUndo )
    {
		if( bRet )
        {
			pUndo->SaveNewBoxes( *pTblNd, aTmpLst );
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
			delete pUndo;
	}
	return bRet;
}

sal_Bool SwDoc::InsertRow( const SwCursor& rCursor, sal_uInt16 nCnt, sal_Bool bBehind )
{
	// lasse ueber das Layout die Boxen suchen
	SwSelBoxes aBoxes;
	GetTblSel( rCursor, aBoxes, nsSwTblSearchType::TBLSEARCH_ROW );

	sal_Bool bRet = sal_False;
	if( aBoxes.Count() )
		bRet = InsertRow( aBoxes, nCnt, bBehind );
	return bRet;
}

sal_Bool SwDoc::InsertRow( const SwSelBoxes& rBoxes, sal_uInt16 nCnt, sal_Bool bBehind )
{
	// uebers SwDoc fuer Undo !!
	ASSERT( rBoxes.Count(), "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	SwTable& rTbl = pTblNd->GetTable();
	if( rTbl.ISA( SwDDETable ))
		return sal_False;

#ifdef DEL_TABLE_REDLINES
	lcl_DelRedlines aDelRedl( *pTblNd, sal_True );
#endif

	SwTableSortBoxes aTmpLst( 0, 5 );
	SwUndoTblNdsChg* pUndo = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
		pUndo = new SwUndoTblNdsChg( UNDO_TABLE_INSROW,rBoxes, *pTblNd,
									 0, 0, nCnt, bBehind, sal_False );
		aTmpLst.Insert( &rTbl.GetTabSortBoxes(), 0, rTbl.GetTabSortBoxes().Count() );
	}

    bool bRet(false);
    {
        ::sw::UndoGuard const undoGuard(GetIDocumentUndoRedo());

        SwTableFmlUpdate aMsgHnt( &rTbl );
        aMsgHnt.eFlags = TBL_BOXPTR;
        UpdateTblFlds( &aMsgHnt );

        bRet = rTbl.InsertRow( this, rBoxes, nCnt, bBehind );
        if (bRet)
        {
            SetModified();
            ::ClearFEShellTabCols();
            SetFieldsDirty( true, NULL, 0 );
        }
    }

	if( pUndo )
    {
		if( bRet )
        {
			pUndo->SaveNewBoxes( *pTblNd, aTmpLst );
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
			delete pUndo;
	}
	return bRet;

}

// ----- loeschen von Spalten/Zeilen ------------------------

sal_Bool SwDoc::DeleteRow( const SwCursor& rCursor )
{
	// lasse ueber das Layout die Boxen suchen
	SwSelBoxes aBoxes;
	GetTblSel( rCursor, aBoxes, nsSwTblSearchType::TBLSEARCH_ROW );
	if( ::HasProtectedCells( aBoxes ))
		return sal_False;

	// die Crsr aus dem Loeschbereich entfernen.
	// Der Cursor steht danach:
	//	- es folgt noch eine Zeile, in dieser
	//	- vorher steht noch eine Zeile, in dieser
	//	- sonst immer dahinter
	{
		SwTableNode* pTblNd = rCursor.GetNode()->FindTableNode();

		if( pTblNd->GetTable().ISA( SwDDETable ))
			return sal_False;

		// suche alle Boxen / Lines
		_FndBox aFndBox( 0, 0 );
		{
			_FndPara aPara( aBoxes, &aFndBox );
			pTblNd->GetTable().GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
		}

		if( !aFndBox.GetLines().Count() )
			return sal_False;

		SwEditShell* pESh = GetEditShell();
		if( pESh )
		{
			pESh->KillPams();
			// JP: eigentlich sollte man ueber alle Shells iterieren!!
		}

		_FndBox* pFndBox = &aFndBox;
		while( 1 == pFndBox->GetLines().Count() &&
				1 == pFndBox->GetLines()[0]->GetBoxes().Count() )
		{
			_FndBox* pTmp = pFndBox->GetLines()[0]->GetBoxes()[0];
			if( pTmp->GetBox()->GetSttNd() )
				break;		// das ist sonst zu weit
			pFndBox = pTmp;
		}

		SwTableLine* pDelLine = pFndBox->GetLines()[
						pFndBox->GetLines().Count()-1 ]->GetLine();
		SwTableBox* pDelBox = pDelLine->GetTabBoxes()[
							pDelLine->GetTabBoxes().Count() - 1 ];
		while( !pDelBox->GetSttNd() )
		{
			SwTableLine* pLn = pDelBox->GetTabLines()[
						pDelBox->GetTabLines().Count()-1 ];
			pDelBox = pLn->GetTabBoxes()[ pLn->GetTabBoxes().Count() - 1 ];
		}
		SwTableBox* pNextBox = pDelLine->FindNextBox( pTblNd->GetTable(),
														pDelBox, sal_True );
		while( pNextBox &&
				pNextBox->GetFrmFmt()->GetProtect().IsCntntProtected() )
			pNextBox = pNextBox->FindNextBox( pTblNd->GetTable(), pNextBox );

		if( !pNextBox )			// keine nachfolgende? dann die vorhergehende
		{
			pDelLine = pFndBox->GetLines()[ 0 ]->GetLine();
			pDelBox = pDelLine->GetTabBoxes()[ 0 ];
			while( !pDelBox->GetSttNd() )
				pDelBox = pDelBox->GetTabLines()[0]->GetTabBoxes()[0];
			pNextBox = pDelLine->FindPreviousBox( pTblNd->GetTable(),
														pDelBox, sal_True );
			while( pNextBox &&
					pNextBox->GetFrmFmt()->GetProtect().IsCntntProtected() )
				pNextBox = pNextBox->FindPreviousBox( pTblNd->GetTable(), pNextBox );
		}

		sal_uLong nIdx;
		if( pNextBox )		// dann den Cursor hier hinein
			nIdx = pNextBox->GetSttIdx() + 1;
		else				// ansonsten hinter die Tabelle
			nIdx = pTblNd->EndOfSectionIndex() + 1;

		SwNodeIndex aIdx( GetNodes(), nIdx );
		SwCntntNode* pCNd = aIdx.GetNode().GetCntntNode();
		if( !pCNd )
			pCNd = GetNodes().GoNext( &aIdx );

		if( pCNd )
		{
			// die Cursor von der Shell oder den uebergebenen Cursor aendern?
			SwPaM* pPam = (SwPaM*)&rCursor;
			pPam->GetPoint()->nNode = aIdx;
			pPam->GetPoint()->nContent.Assign( pCNd, 0 );
			pPam->SetMark();			// beide wollen etwas davon haben
			pPam->DeleteMark();
		}
	}

	// dann loesche doch die Zeilen

    GetIDocumentUndoRedo().StartUndo(UNDO_ROW_DELETE, NULL);
    sal_Bool bResult = DeleteRowCol( aBoxes );
    GetIDocumentUndoRedo().EndUndo(UNDO_ROW_DELETE, NULL);

	return bResult;
}

sal_Bool SwDoc::DeleteCol( const SwCursor& rCursor )
{
	// lasse ueber das Layout die Boxen suchen
	SwSelBoxes aBoxes;
	GetTblSel( rCursor, aBoxes, nsSwTblSearchType::TBLSEARCH_COL );
	if( ::HasProtectedCells( aBoxes ))
		return sal_False;

	// die Crsr muessen noch aus dem Loesch Bereich entfernt
	// werden. Setze sie immer hinter/auf die Tabelle; ueber die
	// Dokument-Position werden sie dann immer an die alte Position gesetzt.
	SwEditShell* pESh = GetEditShell();
	if( pESh )
	{
		const SwNode* pNd = rCursor.GetNode()->FindTableBoxStartNode();
		pESh->ParkCrsr( SwNodeIndex( *pNd ) );
	}

	// dann loesche doch die Spalten
    GetIDocumentUndoRedo().StartUndo(UNDO_COL_DELETE, NULL);
    sal_Bool bResult = DeleteRowCol( aBoxes, true );
    GetIDocumentUndoRedo().EndUndo(UNDO_COL_DELETE, NULL);

	return bResult;
}

sal_Bool SwDoc::DeleteRowCol( const SwSelBoxes& rBoxes, bool bColumn )
{
	if( ::HasProtectedCells( rBoxes ))
		return sal_False;

	// uebers SwDoc fuer Undo !!
	ASSERT( rBoxes.Count(), "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	if( pTblNd->GetTable().ISA( SwDDETable ))
		return sal_False;

	::ClearFEShellTabCols();
    SwSelBoxes aSelBoxes;
    aSelBoxes.Insert(rBoxes.GetData(), rBoxes.Count());
    SwTable &rTable = pTblNd->GetTable();
    long nMin = 0;
    long nMax = 0;
    if( rTable.IsNewModel() )
	{
		if( bColumn )
			rTable.ExpandColumnSelection( aSelBoxes, nMin, nMax );
		else
			rTable.FindSuperfluousRows( aSelBoxes );
	}

#ifdef DEL_TABLE_REDLINES
	lcl_DelRedlines aDelRedl( *pTblNd, sal_True );
#endif

	// soll die gesamte Tabelle geloescht werden ??
	const sal_uLong nTmpIdx1 = pTblNd->GetIndex();
	const sal_uLong nTmpIdx2 = aSelBoxes[ aSelBoxes.Count()-1 ]->GetSttNd()->
								EndOfSectionIndex()+1;
	if( pTblNd->GetTable().GetTabSortBoxes().Count() == aSelBoxes.Count() &&
		aSelBoxes[0]->GetSttIdx()-1 == nTmpIdx1 &&
		nTmpIdx2 == pTblNd->EndOfSectionIndex() )
	{
		sal_Bool bNewTxtNd = sal_False;
		// steht diese auch noch alleine in einem FlyFrame ?
		SwNodeIndex aIdx( *pTblNd, -1 );
		const SwStartNode* pSttNd = aIdx.GetNode().GetStartNode();
		if( pSttNd )
		{
			const sal_uLong nTblEnd = pTblNd->EndOfSectionIndex() + 1;
			const sal_uLong nSectEnd = pSttNd->EndOfSectionIndex();
			if( nTblEnd == nSectEnd )
			{
				if( SwFlyStartNode == pSttNd->GetStartNodeType() )
				{
					SwFrmFmt* pFmt = pSttNd->GetFlyFmt();
					if( pFmt )
					{
						// Ok, das ist das gesuchte FlyFormat
						DelLayoutFmt( pFmt );
						return sal_True;
					}
				}
				// kein Fly ?? also Kopf- oder Fusszeile: dann immer einen
				// TextNode ueberig lassen.
				// Undo koennen wir dann vergessen !!
				bNewTxtNd = sal_True;
			}
		}

		// kein Fly ?? also Kopf- oder Fusszeile: dann immer einen
		// TextNode ueberig lassen.
		aIdx++;
        if (GetIDocumentUndoRedo().DoesUndo())
        {
            GetIDocumentUndoRedo().ClearRedo();
			SwPaM aPaM( *pTblNd->EndOfSectionNode(), aIdx.GetNode() );

			if( bNewTxtNd )
			{
				const SwNodeIndex aTmpIdx( *pTblNd->EndOfSectionNode(), 1 );
				GetNodes().MakeTxtNode( aTmpIdx,
							GetTxtCollFromPool( RES_POOLCOLL_STANDARD ) );
			}

            // save the cursors (UNO and otherwise)
            SwPaM aSavePaM( SwNodeIndex( *pTblNd->EndOfSectionNode() ) );
            if( ! aSavePaM.Move( fnMoveForward, fnGoNode ) )
            {
                *aSavePaM.GetMark() = SwPosition( *pTblNd );
                aSavePaM.Move( fnMoveBackward, fnGoNode );
            }
            {
                SwPaM const tmpPaM(*pTblNd, *pTblNd->EndOfSectionNode());
                ::PaMCorrAbs(tmpPaM, *aSavePaM.GetMark());
            }

			// harte SeitenUmbrueche am nachfolgenden Node verschieben
			sal_Bool bSavePageBreak = sal_False, bSavePageDesc = sal_False;
			sal_uLong nNextNd = pTblNd->EndOfSectionIndex()+1;
			SwCntntNode* pNextNd = GetNodes()[ nNextNd ]->GetCntntNode();
			if( pNextNd )
			{
//JP 24.08.98: will man wirklich den PageDesc/Break vom
//				nachfolgen Absatz ueberbuegeln?
//				const SwAttrSet& rAttrSet = pNextNd->GetSwAttrSet();
//				if( SFX_ITEM_SET != rAttrSet.GetItemState( RES_PAGEDESC ) &&
//					SFX_ITEM_SET != rAttrSet.GetItemState( RES_BREAK ))
				{
					SwFrmFmt* pTableFmt = pTblNd->GetTable().GetFrmFmt();
					const SfxPoolItem *pItem;
					if( SFX_ITEM_SET == pTableFmt->GetItemState( RES_PAGEDESC,
						sal_False, &pItem ) )
					{
						pNextNd->SetAttr( *pItem );
						bSavePageDesc = sal_True;
					}

					if( SFX_ITEM_SET == pTableFmt->GetItemState( RES_BREAK,
						sal_False, &pItem ) )
					{
						pNextNd->SetAttr( *pItem );
						bSavePageBreak = sal_True;
					}
				}
			}
			SwUndoDelete* pUndo = new SwUndoDelete( aPaM );
			if( bNewTxtNd )
				pUndo->SetTblDelLastNd();
			pUndo->SetPgBrkFlags( bSavePageBreak, bSavePageDesc );
            pUndo->SetTableName(pTblNd->GetTable().GetFrmFmt()->GetName());
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
        {
			if( bNewTxtNd )
			{
				const SwNodeIndex aTmpIdx( *pTblNd->EndOfSectionNode(), 1 );
				GetNodes().MakeTxtNode( aTmpIdx,
							GetTxtCollFromPool( RES_POOLCOLL_STANDARD ) );
			}

            // save the cursors (UNO and otherwise)
            SwPaM aSavePaM( SwNodeIndex( *pTblNd->EndOfSectionNode() ) );
            if( ! aSavePaM.Move( fnMoveForward, fnGoNode ) )
            {
                *aSavePaM.GetMark() = SwPosition( *pTblNd );
                aSavePaM.Move( fnMoveBackward, fnGoNode );
            }
            {
                SwPaM const tmpPaM(*pTblNd, *pTblNd->EndOfSectionNode());
                ::PaMCorrAbs(tmpPaM, *aSavePaM.GetMark());
            }

			// harte SeitenUmbrueche am nachfolgenden Node verschieben
			SwCntntNode* pNextNd = GetNodes()[ pTblNd->EndOfSectionIndex()+1 ]->GetCntntNode();
			if( pNextNd )
			{
				SwFrmFmt* pTableFmt = pTblNd->GetTable().GetFrmFmt();
				const SfxPoolItem *pItem;
				if( SFX_ITEM_SET == pTableFmt->GetItemState( RES_PAGEDESC,
					sal_False, &pItem ) )
					pNextNd->SetAttr( *pItem );

				if( SFX_ITEM_SET == pTableFmt->GetItemState( RES_BREAK,
					sal_False, &pItem ) )
					pNextNd->SetAttr( *pItem );
			}

			pTblNd->DelFrms();
			DeleteSection( pTblNd );
		}
		SetModified();
		SetFieldsDirty( true, NULL, 0 );
		return sal_True;
	}

	SwUndoTblNdsChg* pUndo = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
		pUndo = new SwUndoTblNdsChg( UNDO_TABLE_DELBOX, aSelBoxes, *pTblNd,
                                     nMin, nMax, 0, sal_False, sal_False );
	}

    bool bRet(false);
    {
        ::sw::UndoGuard const undoGuard(GetIDocumentUndoRedo());

        SwTableFmlUpdate aMsgHnt( &pTblNd->GetTable() );
        aMsgHnt.eFlags = TBL_BOXPTR;
        UpdateTblFlds( &aMsgHnt );

        if (rTable.IsNewModel())
        {
            if (bColumn)
                rTable.PrepareDeleteCol( nMin, nMax );
            rTable.FindSuperfluousRows( aSelBoxes );
            if (pUndo)
                pUndo->ReNewBoxes( aSelBoxes );
        }
        bRet = rTable.DeleteSel( this, aSelBoxes, 0, pUndo, sal_True, sal_True );
        if (bRet)
        {
            SetModified();
            SetFieldsDirty( true, NULL, 0 );
        }
    }

	if( pUndo )
    {
		if( bRet )
        {
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
			delete pUndo;
	}

	return bRet;
}


// ---------- teilen / zusammenfassen von Boxen in der Tabelle --------

sal_Bool SwDoc::SplitTbl( const SwSelBoxes& rBoxes, sal_Bool bVert, sal_uInt16 nCnt,
                      sal_Bool bSameHeight )
{
	// uebers SwDoc fuer Undo !!
	ASSERT( rBoxes.Count() && nCnt, "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	SwTable& rTbl = pTblNd->GetTable();
	if( rTbl.ISA( SwDDETable ))
		return sal_False;

#ifdef DEL_TABLE_REDLINES
	lcl_DelRedlines aDelRedl( *pTblNd, sal_True );
#endif

	SvULongs aNdsCnts;
	SwTableSortBoxes aTmpLst( 0, 5 );
	SwUndoTblNdsChg* pUndo = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
        pUndo = new SwUndoTblNdsChg( UNDO_TABLE_SPLIT, rBoxes, *pTblNd, 0, 0,
                                     nCnt, bVert, bSameHeight );

		aTmpLst.Insert( &rTbl.GetTabSortBoxes(), 0, rTbl.GetTabSortBoxes().Count() );
		if( !bVert )
		{
			for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
			{
				const SwStartNode* pSttNd = rBoxes[ n ]->GetSttNd();
				aNdsCnts.Insert( pSttNd->EndOfSectionIndex() -
								 pSttNd->GetIndex(), n );
			}
		}
	}

    bool bRet(false);
    {
        ::sw::UndoGuard const undoGuard(GetIDocumentUndoRedo());

        SwTableFmlUpdate aMsgHnt( &rTbl );
        aMsgHnt.eFlags = TBL_BOXPTR;
        UpdateTblFlds( &aMsgHnt );

        if (bVert)
            bRet = rTbl.SplitCol( this, rBoxes, nCnt );
        else
            bRet = rTbl.SplitRow( this, rBoxes, nCnt, bSameHeight );

        if (bRet)
        {
            SetModified();
            SetFieldsDirty( true, NULL, 0 );
        }
    }

	if( pUndo )
	{
		if( bRet )
		{
			if( bVert )
				pUndo->SaveNewBoxes( *pTblNd, aTmpLst );
			else
				pUndo->SaveNewBoxes( *pTblNd, aTmpLst, rBoxes, aNdsCnts );
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
			delete pUndo;
	}

	return bRet;
}


sal_uInt16 SwDoc::MergeTbl( SwPaM& rPam )
{
	// pruefe ob vom aktuellen Crsr der SPoint/Mark in einer Tabelle stehen
	SwTableNode* pTblNd = rPam.GetNode()->FindTableNode();
	if( !pTblNd )
		return TBLMERGE_NOSELECTION;
    SwTable& rTable = pTblNd->GetTable();
    if( rTable.ISA(SwDDETable) )
		return TBLMERGE_NOSELECTION;
	sal_uInt16 nRet = TBLMERGE_NOSELECTION;
    if( !rTable.IsNewModel() )
    {
        nRet =::CheckMergeSel( rPam );
        if( TBLMERGE_OK != nRet )
            return nRet;
        nRet = TBLMERGE_NOSELECTION;
    }

    // --> FME 2004-10-08 #i33394#
    GetIDocumentUndoRedo().StartUndo( UNDO_TABLE_MERGE, NULL );
    // <--

#ifdef DEL_TABLE_REDLINES
	if( !IsIgnoreRedline() && GetRedlineTbl().Count() )
		DeleteRedline( *pTblNd, true, USHRT_MAX );
#endif
	RedlineMode_t eOld = GetRedlineMode();
	SetRedlineMode_intern((RedlineMode_t)(eOld | nsRedlineMode_t::REDLINE_IGNORE));

    SwUndoTblMerge *const pUndo( (GetIDocumentUndoRedo().DoesUndo())
        ?   new SwUndoTblMerge( rPam )
        :   0 );

	// lasse ueber das Layout die Boxen suchen
	SwSelBoxes aBoxes;
    SwSelBoxes aMerged;
	SwTableBox* pMergeBox;

	if( !rTable.PrepareMerge( rPam, aBoxes, aMerged, &pMergeBox, pUndo ) )
	{   // no cells found to merge
		SetRedlineMode_intern( eOld );
		if( pUndo )
		{
			delete pUndo;
            SwUndoId nLastUndoId(UNDO_EMPTY);
            if (GetIDocumentUndoRedo().GetLastUndoInfo(0, & nLastUndoId)
                && (UNDO_REDLINE == nLastUndoId))
            {
                // FIXME: why is this horrible cleanup necessary?
                SwUndoRedline *const pU = dynamic_cast<SwUndoRedline*>(
                        GetUndoManager().RemoveLastUndo());
				if( pU->GetRedlSaveCount() )
                {
                    SwEditShell *const pEditShell(GetEditShell(0));
                    OSL_ASSERT(pEditShell);
                    ::sw::UndoRedoContext context(*this, *pEditShell);
                    static_cast<SfxUndoAction *>(pU)->UndoWithContext(context);
                }
				delete pU;
			}
		}
	}
	else
	{
		// die PaMs muessen noch aus dem Loesch Bereich entfernt
		// werden. Setze sie immer hinter/auf die Tabelle; ueber die
		// Dokument-Position werden sie dann immer an die alte Position gesetzt.
		// Erstmal einen Index auf die Parkposition merken, denn nach GetMergeSel
		// komme ich nicht mehr dran.
		{
			rPam.DeleteMark();
			rPam.GetPoint()->nNode = *pMergeBox->GetSttNd();
			rPam.GetPoint()->nContent.Assign( 0, 0 );
			rPam.SetMark();
			rPam.DeleteMark();

			SwPaM* pTmp = &rPam;
			while( &rPam != ( pTmp = (SwPaM*)pTmp->GetNext() ))
				for( int i = 0; i < 2; ++i )
					pTmp->GetBound( (sal_Bool)i ) = *rPam.GetPoint();
		}

		// dann fuege sie zusammen
		SwTableFmlUpdate aMsgHnt( &pTblNd->GetTable() );
		aMsgHnt.eFlags = TBL_BOXPTR;
		UpdateTblFlds( &aMsgHnt );

		if( pTblNd->GetTable().Merge( this, aBoxes, aMerged, pMergeBox, pUndo ))
		{
			nRet = TBLMERGE_OK;
			SetModified();
			SetFieldsDirty( true, NULL, 0 );
			if( pUndo )
            {
                GetIDocumentUndoRedo().AppendUndo( pUndo );
            }
        }
		else if( pUndo )
			delete pUndo;

		rPam.GetPoint()->nNode = *pMergeBox->GetSttNd();
		rPam.Move();

		::ClearFEShellTabCols();
		SetRedlineMode_intern( eOld );
	}
    GetIDocumentUndoRedo().EndUndo( UNDO_TABLE_MERGE, NULL );
	return nRet;
}



// -------------------------------------------------------

//---------
// SwTableNode
//---------

SwTableNode::SwTableNode( const SwNodeIndex& rIdx )
	: SwStartNode( rIdx, ND_TABLENODE )
{
	pTable = new SwTable( 0 );
}

SwTableNode::~SwTableNode()
{
	//don't forget to notify uno wrappers
	SwFrmFmt* pTblFmt = GetTable().GetFrmFmt();
	SwPtrMsgPoolItem aMsgHint( RES_REMOVE_UNO_OBJECT,
								pTblFmt );
	pTblFmt->ModifyNotification( &aMsgHint, &aMsgHint );
	DelFrms();
	delete pTable;
}

SwTabFrm *SwTableNode::MakeFrm( SwFrm* pSib )
{
	return new SwTabFrm( *pTable, pSib );
}

//Methode erzeugt fuer den vorhergehenden Node alle Ansichten vom
//Dokument. Die erzeugten Contentframes werden in das entsprechende
//Layout gehaengt.
void SwTableNode::MakeFrms(const SwNodeIndex & rIdx )
{
	if( !GetTable().GetFrmFmt()->GetDepends())//gibt es ueberhaupt Frames ??
		return;

	SwFrm *pFrm, *pNew;
	SwCntntNode * pNode = rIdx.GetNode().GetCntntNode();

	ASSERT( pNode, "Kein Contentnode oder Copy-Node und neuer Node identisch.");

	sal_Bool bBefore = rIdx < GetIndex();

	SwNode2Layout aNode2Layout( *this, rIdx.GetIndex() );

	while( 0 != (pFrm = aNode2Layout.NextFrm()) )
	{
		pNew = pNode->MakeFrm( pFrm );
		// wird ein Node vorher oder nachher mit Frames versehen
		if ( bBefore )
			// der neue liegt vor mir
			pNew->Paste( pFrm->GetUpper(), pFrm );
		else
			// der neue liegt hinter mir
			pNew->Paste( pFrm->GetUpper(), pFrm->GetNext() );
	}
}

//Fuer jede Shell einen TblFrm anlegen und vor den entsprechenden
//CntntFrm pasten.

void SwTableNode::MakeFrms( SwNodeIndex* pIdxBehind )
{
	ASSERT( pIdxBehind, "kein Index" );
	*pIdxBehind = *this;
	SwNode *pNd = GetNodes().FindPrvNxtFrmNode( *pIdxBehind, EndOfSectionNode() );
	if( !pNd )
		return ;

    SwFrm *pFrm( 0L );
	SwLayoutFrm *pUpper( 0L );
	SwNode2Layout aNode2Layout( *pNd, GetIndex() );
	while( 0 != (pUpper = aNode2Layout.UpperFrm( pFrm, *this )) )
	{
        SwTabFrm* pNew = MakeFrm( pUpper );
		pNew->Paste( pUpper, pFrm );
        // --> OD 2005-12-01 #i27138#
        // notify accessibility paragraphs objects about changed
        // CONTENT_FLOWS_FROM/_TO relation.
        // Relation CONTENT_FLOWS_FROM for next paragraph will change
        // and relation CONTENT_FLOWS_TO for previous paragraph will change.
        {
            ViewShell* pViewShell( pNew->getRootFrm()->GetCurrShell() );
            if ( pViewShell && pViewShell->GetLayout() &&
                 pViewShell->GetLayout()->IsAnyShellAccessible() )
            {
                pViewShell->InvalidateAccessibleParaFlowRelation(
                            dynamic_cast<SwTxtFrm*>(pNew->FindNextCnt( true )),
                            dynamic_cast<SwTxtFrm*>(pNew->FindPrevCnt( true )) );
            }
        }
        // <--
        ((SwTabFrm*)pNew)->RegistFlys();
	}
}

void SwTableNode::DelFrms()
{
	//Erstmal die TabFrms ausschneiden und deleten, die Columns und Rows
	//nehmen sie mit in's Grab.
	//Die TabFrms haengen am FrmFmt des SwTable.
	//Sie muessen etwas umstaendlich zerstort werden, damit die Master
	//die Follows mit in's Grab nehmen.

	SwIterator<SwTabFrm,SwFmt> aIter( *(pTable->GetFrmFmt()) );
	SwTabFrm *pFrm = aIter.First();
	while ( pFrm )
	{
		sal_Bool bAgain = sal_False;
		{
			if ( !pFrm->IsFollow() )
			{
				while ( pFrm->HasFollow() )
					pFrm->JoinAndDelFollows();
                // --> OD 2005-12-01 #i27138#
                // notify accessibility paragraphs objects about changed
                // CONTENT_FLOWS_FROM/_TO relation.
                // Relation CONTENT_FLOWS_FROM for current next paragraph will change
                // and relation CONTENT_FLOWS_TO for current previous paragraph will change.
                {
                    ViewShell* pViewShell( pFrm->getRootFrm()->GetCurrShell() );
                    if ( pViewShell && pViewShell->GetLayout() &&
                         pViewShell->GetLayout()->IsAnyShellAccessible() )
                    {
                        pViewShell->InvalidateAccessibleParaFlowRelation(
                            dynamic_cast<SwTxtFrm*>(pFrm->FindNextCnt( true )),
                            dynamic_cast<SwTxtFrm*>(pFrm->FindPrevCnt( true )) );
                    }
                }
                // <--
                pFrm->Cut();
				delete pFrm;
				bAgain = sal_True;
			}
		}
		pFrm = bAgain ? aIter.First() : aIter.Next();
	}
}


void SwTableNode::SetNewTable( SwTable* pNewTable, sal_Bool bNewFrames )
{
	DelFrms();
	delete pTable;
	pTable = pNewTable;
	if( bNewFrames )
	{
		SwNodeIndex aIdx( *EndOfSectionNode());
		GetNodes().GoNext( &aIdx );
		MakeFrms( &aIdx );
	}
}

void SwDoc::GetTabCols( SwTabCols &rFill, const SwCursor* pCrsr,
						const SwCellFrm* pBoxFrm ) const
{
	const SwTableBox* pBox = 0;
	SwTabFrm *pTab = 0;

	if( pBoxFrm )
	{
		pTab = ((SwFrm*)pBoxFrm)->ImplFindTabFrm();
		pBox = pBoxFrm->GetTabBox();
	}
	else if( pCrsr )
	{
		const SwCntntNode* pCNd = pCrsr->GetCntntNode();
		if( !pCNd )
			return ;

		Point aPt;
        const SwShellCrsr *pShCrsr = dynamic_cast<const SwShellCrsr*>(pCrsr);
		if( pShCrsr )
			aPt = pShCrsr->GetPtPos();

		const SwFrm* pTmpFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout(), &aPt, 0, sal_False );
		do {
			pTmpFrm = pTmpFrm->GetUpper();
		} while ( !pTmpFrm->IsCellFrm() );

		pBoxFrm = (SwCellFrm*)pTmpFrm;
		pTab = ((SwFrm*)pBoxFrm)->ImplFindTabFrm();
		pBox = pBoxFrm->GetTabBox();
	}
	else if( !pCrsr && !pBoxFrm )
	{
		ASSERT( !this, "einer von beiden muss angegeben werden!" );
		return ;
	}

	//Fix-Punkte setzen, LeftMin in Dokumentkoordinaten die anderen relativ.
    SWRECTFN( pTab )
    const SwPageFrm* pPage = pTab->FindPageFrm();
    const sal_uLong nLeftMin = (pTab->Frm().*fnRect->fnGetLeft)() -
                           (pPage->Frm().*fnRect->fnGetLeft)();
    const sal_uLong nRightMax = (pTab->Frm().*fnRect->fnGetRight)() -
                            (pPage->Frm().*fnRect->fnGetLeft)();

    rFill.SetLeftMin ( nLeftMin );
    rFill.SetLeft    ( (pTab->Prt().*fnRect->fnGetLeft)() );
    rFill.SetRight   ( (pTab->Prt().*fnRect->fnGetRight)());
    rFill.SetRightMax( nRightMax - nLeftMin );

	pTab->GetTable()->GetTabCols( rFill, pBox );
}

//
// Here are some little helpers used in SwDoc::GetTabRows
//

#define ROWFUZZY 25

struct FuzzyCompare
{
    bool operator() ( long s1, long s2 ) const;
};

bool FuzzyCompare::operator() ( long s1, long s2 ) const
{
    return ( s1 < s2 && abs( s1 - s2 ) > ROWFUZZY );
}

bool lcl_IsFrmInColumn( const SwCellFrm& rFrm, SwSelBoxes& rBoxes )
{
    for( sal_uInt16 i = 0; i < rBoxes.Count(); ++i )
    {
        if ( rFrm.GetTabBox() == rBoxes[ i ] )
            return true;
    }

    return false;
}

//
// SwDoc::GetTabRows()
//

void SwDoc::GetTabRows( SwTabCols &rFill, const SwCursor* ,
						const SwCellFrm* pBoxFrm ) const
{
    ASSERT( pBoxFrm, "GetTabRows called without pBoxFrm" )

    // --> FME 2005-09-12 #121591# Make code robust:
    if ( !pBoxFrm )
        return;
    // <--

    // --> FME 2005-01-06 #i39552# Collection of the boxes of the current
    // column has to be done at the beginning of this function, because
    // the table may be formatted in ::GetTblSel.
    SwDeletionChecker aDelCheck( pBoxFrm );

    SwSelBoxes aBoxes;
    const SwCntntFrm* pCntnt = ::GetCellCntnt( *pBoxFrm );
    if ( pCntnt && pCntnt->IsTxtFrm() )
    {
        const SwPosition aPos( *((SwTxtFrm*)pCntnt)->GetTxtNode() );
        const SwCursor aTmpCrsr( aPos, 0, false );
        ::GetTblSel( aTmpCrsr, aBoxes, nsSwTblSearchType::TBLSEARCH_COL );
    }
    // <--

    // --> FME 2005-09-12 #121591# Make code robust:
    if ( aDelCheck.HasBeenDeleted() )
    {
        ASSERT( false, "Current box has been deleted during GetTabRows()" )
        return;
    }
    // <--

    // --> FME 2005-09-12 #121591# Make code robust:
    const SwTabFrm* pTab = pBoxFrm->FindTabFrm();
    ASSERT( pTab, "GetTabRows called without a table" )
    if ( !pTab )
        return;
    // <--

    const SwFrm* pFrm = pTab->GetNextLayoutLeaf();

	//Fix-Punkte setzen, LeftMin in Dokumentkoordinaten die anderen relativ.
    SWRECTFN( pTab )
    const SwPageFrm* pPage = pTab->FindPageFrm();
    const long nLeftMin  = ( bVert ?
                             pTab->GetPrtLeft() - pPage->Frm().Left() :
                             pTab->GetPrtTop() - pPage->Frm().Top() );
    const long nLeft     = bVert ? LONG_MAX : 0;
    const long nRight    = (pTab->Prt().*fnRect->fnGetHeight)();
    const long nRightMax = bVert ? nRight : LONG_MAX;

    rFill.SetLeftMin( nLeftMin );
    rFill.SetLeft( nLeft );
    rFill.SetRight( nRight );
    rFill.SetRightMax( nRightMax );

    typedef std::map< long, std::pair< long, long >, FuzzyCompare > BoundaryMap;
    BoundaryMap aBoundaries;
    BoundaryMap::iterator aIter;
    std::pair< long, long > aPair;

    typedef std::map< long, bool > HiddenMap;
    HiddenMap aHidden;
    HiddenMap::iterator aHiddenIter;

    while ( pFrm && pTab->IsAnLower( pFrm ) )
    {
        if ( pFrm->IsCellFrm() && pFrm->FindTabFrm() == pTab )
        {
            // upper and lower borders of current cell frame:
            long nUpperBorder = (pFrm->Frm().*fnRect->fnGetTop)();
            long nLowerBorder = (pFrm->Frm().*fnRect->fnGetBottom)();

            // get boundaries for nUpperBorder:
            aIter = aBoundaries.find( nUpperBorder );
            if ( aIter == aBoundaries.end() )
            {
                aPair.first = nUpperBorder; aPair.second = LONG_MAX;
                aBoundaries[ nUpperBorder ] = aPair;
            }

            // get boundaries for nLowerBorder:
            aIter = aBoundaries.find( nLowerBorder );
            if ( aIter == aBoundaries.end() )
            {
                aPair.first = nUpperBorder; aPair.second = LONG_MAX;
            }
            else
            {
                nLowerBorder = (*aIter).first;
                long nNewLowerBorderUpperBoundary = Max( (*aIter).second.first, nUpperBorder );
                aPair.first = nNewLowerBorderUpperBoundary; aPair.second = LONG_MAX;
            }
            aBoundaries[ nLowerBorder ] = aPair;

            // calculate hidden flags for entry nUpperBorder/nLowerBorder:
            long nTmpVal = nUpperBorder;
            for ( sal_uInt8 i = 0; i < 2; ++i )
            {
                aHiddenIter = aHidden.find( nTmpVal );
                if ( aHiddenIter == aHidden.end() )
                    aHidden[ nTmpVal ] = !lcl_IsFrmInColumn( *((SwCellFrm*)pFrm), aBoxes );
                else
                {
                    if ( aHidden[ nTmpVal ] &&
                         lcl_IsFrmInColumn( *((SwCellFrm*)pFrm), aBoxes ) )
                        aHidden[ nTmpVal ] = false;
                }
                nTmpVal = nLowerBorder;
            }
        }

        pFrm = pFrm->GetNextLayoutLeaf();
    }

    // transfer calculated values from BoundaryMap and HiddenMap into rFill:
    sal_uInt16 nIdx = 0;
    for ( aIter = aBoundaries.begin(); aIter != aBoundaries.end(); ++aIter )
    {
        const long nTabTop = (pTab->*fnRect->fnGetPrtTop)();
        const long nKey = (*fnRect->fnYDiff)( (*aIter).first, nTabTop );
        const std::pair< long, long > aTmpPair = (*aIter).second;
        const long nFirst = (*fnRect->fnYDiff)( aTmpPair.first, nTabTop );
        const long nSecond = aTmpPair.second;

        aHiddenIter = aHidden.find( (*aIter).first );
        const bool bHidden = aHiddenIter != aHidden.end() && (*aHiddenIter).second;
        rFill.Insert( nKey, nFirst, nSecond, bHidden, nIdx++ );
    }

    // delete first and last entry
    ASSERT( rFill.Count(), "Deleting from empty vector. Fasten your seatbelts!" )
    // --> FME 2006-01-19 #i60818# There may be only one entry in rFill. Make
    // code robust by checking count of rFill.
    if ( rFill.Count() ) rFill.Remove( 0, 1 );
    if ( rFill.Count() ) rFill.Remove( rFill.Count() - 1 , 1 );
    // <--
    rFill.SetLastRowAllowedToChange( !pTab->HasFollowFlowLine() );
}

void SwDoc::SetTabCols( const SwTabCols &rNew, sal_Bool bCurRowOnly,
						const SwCursor* pCrsr, const SwCellFrm* pBoxFrm )
{
	const SwTableBox* pBox = 0;
	SwTabFrm *pTab = 0;

	if( pBoxFrm )
	{
		pTab = ((SwFrm*)pBoxFrm)->ImplFindTabFrm();
		pBox = pBoxFrm->GetTabBox();
	}
	else if( pCrsr )
	{
		const SwCntntNode* pCNd = pCrsr->GetCntntNode();
		if( !pCNd )
			return ;

		Point aPt;
        const SwShellCrsr *pShCrsr = dynamic_cast<const SwShellCrsr*>(pCrsr);
		if( pShCrsr )
			aPt = pShCrsr->GetPtPos();

		const SwFrm* pTmpFrm = pCNd->getLayoutFrm( pCNd->GetDoc()->GetCurrentLayout(), &aPt, 0, sal_False );
		do {
			pTmpFrm = pTmpFrm->GetUpper();
		} while ( !pTmpFrm->IsCellFrm() );

		pBoxFrm = (SwCellFrm*)pTmpFrm;
		pTab = ((SwFrm*)pBoxFrm)->ImplFindTabFrm();
		pBox = pBoxFrm->GetTabBox();
	}
	else if( !pCrsr && !pBoxFrm )
	{
		ASSERT( !this, "einer von beiden muss angegeben werden!" );
		return ;
	}

	// sollte die Tabelle noch auf relativen Werten (USHRT_MAX) stehen
	// dann muss es jetzt auf absolute umgerechnet werden.
	SwTable& rTab = *pTab->GetTable();
	const SwFmtFrmSize& rTblFrmSz = rTab.GetFrmFmt()->GetFrmSize();
    SWRECTFN( pTab )
    // OD 06.08.2003 #i17174# - With fix for #i9040# the shadow size is taken
    // from the table width. Thus, add its left and right size to current table
    // printing area width in order to get the correct table size attribute.
    SwTwips nPrtWidth = (pTab->Prt().*fnRect->fnGetWidth)();
    {
        SvxShadowItem aShadow( rTab.GetFrmFmt()->GetShadow() );
        nPrtWidth += aShadow.CalcShadowSpace( SHADOW_LEFT ) +
                     aShadow.CalcShadowSpace( SHADOW_RIGHT );
    }
    if( nPrtWidth != rTblFrmSz.GetWidth() )
	{
		SwFmtFrmSize aSz( rTblFrmSz );
        aSz.SetWidth( nPrtWidth );
        rTab.GetFrmFmt()->SetFmtAttr( aSz );
	}

    SwTabCols aOld( rNew.Count() );

    const SwPageFrm* pPage = pTab->FindPageFrm();
    const sal_uLong nLeftMin = (pTab->Frm().*fnRect->fnGetLeft)() -
                           (pPage->Frm().*fnRect->fnGetLeft)();
    const sal_uLong nRightMax = (pTab->Frm().*fnRect->fnGetRight)() -
                            (pPage->Frm().*fnRect->fnGetLeft)();

    //Fix-Punkte setzen, LeftMin in Dokumentkoordinaten die anderen relativ.
    aOld.SetLeftMin ( nLeftMin );
    aOld.SetLeft    ( (pTab->Prt().*fnRect->fnGetLeft)() );
    aOld.SetRight   ( (pTab->Prt().*fnRect->fnGetRight)());
    aOld.SetRightMax( nRightMax - nLeftMin );

    rTab.GetTabCols( aOld, pBox );
    SetTabCols(rTab, rNew, aOld, pBox, bCurRowOnly );
}

void SwDoc::SetTabRows( const SwTabCols &rNew, sal_Bool bCurColOnly, const SwCursor*,
                        const SwCellFrm* pBoxFrm )
{
	const SwTableBox* pBox;
	SwTabFrm *pTab;

    ASSERT( pBoxFrm, "SetTabRows called without pBoxFrm" )

	pTab = ((SwFrm*)pBoxFrm)->ImplFindTabFrm();
	pBox = pBoxFrm->GetTabBox();

	// sollte die Tabelle noch auf relativen Werten (USHRT_MAX) stehen
	// dann muss es jetzt auf absolute umgerechnet werden.
    SWRECTFN( pTab )
	SwTabCols aOld( rNew.Count() );

    //Fix-Punkte setzen, LeftMin in Dokumentkoordinaten die anderen relativ.
    const SwPageFrm* pPage = pTab->FindPageFrm();

    aOld.SetRight( (pTab->Prt().*fnRect->fnGetHeight)() );
    long nLeftMin;
    if ( bVert )
    {
        nLeftMin = pTab->GetPrtLeft() - pPage->Frm().Left();
        aOld.SetLeft    ( LONG_MAX );
        aOld.SetRightMax( aOld.GetRight() );

    }
    else
    {
        nLeftMin = pTab->GetPrtTop() - pPage->Frm().Top();
        aOld.SetLeft    ( 0 );
        aOld.SetRightMax( LONG_MAX );
    }
    aOld.SetLeftMin ( nLeftMin );

    GetTabRows( aOld, 0, pBoxFrm );

    GetIDocumentUndoRedo().StartUndo( UNDO_TABLE_ATTR, NULL );

    // check for differences between aOld and rNew:
    const sal_uInt16 nCount = rNew.Count();
    const SwTable* pTable = pTab->GetTable();
    ASSERT( pTable, "My colleague told me, this couldn't happen" );

    for ( sal_uInt16 i = 0; i <= nCount; ++i )
    {
        const sal_uInt16 nIdxStt = bVert ? nCount - i : i - 1;
        const sal_uInt16 nIdxEnd = bVert ? nCount - i - 1 : i;

        const long nOldRowStart = i == 0  ? 0 : aOld[ nIdxStt ];
        const long nOldRowEnd =   i == nCount ? aOld.GetRight() : aOld[ nIdxEnd ];
        const long nOldRowHeight = nOldRowEnd - nOldRowStart;

        const long nNewRowStart = i == 0  ? 0 : rNew[ nIdxStt ];
        const long nNewRowEnd =   i == nCount ? rNew.GetRight() : rNew[ nIdxEnd ];
        const long nNewRowHeight = nNewRowEnd - nNewRowStart;

        const long nDiff = nNewRowHeight - nOldRowHeight;
        if ( abs( nDiff ) >= ROWFUZZY )
        {
            // For the old table model pTxtFrm and pLine will be set for every box.
            // For the new table model pTxtFrm will be set if the box is not covered,
            // but the pLine will be set if the box is not an overlapping box
            // In the new table model the row height can be adjusted,
            // when both variables are set.
            SwTxtFrm* pTxtFrm = 0;
            const SwTableLine* pLine = 0;

            // Iterate over all SwCellFrms with Bottom = nOldPos
            const SwFrm* pFrm = pTab->GetNextLayoutLeaf();
            while ( pFrm && pTab->IsAnLower( pFrm ) )
            {
                if ( pFrm->IsCellFrm() && pFrm->FindTabFrm() == pTab )
                {
                    const long nLowerBorder = (pFrm->Frm().*fnRect->fnGetBottom)();
                    const sal_uLong nTabTop = (pTab->*fnRect->fnGetPrtTop)();
                    if ( abs( (*fnRect->fnYInc)( nTabTop, nOldRowEnd ) - nLowerBorder ) <= ROWFUZZY )
                    {
                        if ( !bCurColOnly || pFrm == pBoxFrm )
                        {
                            const SwFrm* pCntnt = ::GetCellCntnt( static_cast<const SwCellFrm&>(*pFrm) );

                            if ( pCntnt && pCntnt->IsTxtFrm() )
                            {
                                pBox = ((SwCellFrm*)pFrm)->GetTabBox();
                                const long nRowSpan = pBox->getRowSpan();
                                if( nRowSpan > 0 ) // Not overlapped
                                    pTxtFrm = (SwTxtFrm*)pCntnt;
                                if( nRowSpan < 2 ) // Not overlapping for row height
                                    pLine = pBox->GetUpper();
                                if( pLine && pTxtFrm ) // always for old table model
                                {
                                    // The new row height must not to be calculated from a overlapping box
                                    SwFmtFrmSize aNew( pLine->GetFrmFmt()->GetFrmSize() );
                                    const long nNewSize = (pFrm->Frm().*fnRect->fnGetHeight)() + nDiff;
                                    if( nNewSize != aNew.GetHeight() )
                                    {
                                        aNew.SetHeight( nNewSize );
                                        if ( ATT_VAR_SIZE == aNew.GetHeightSizeType() )
                                            aNew.SetHeightSizeType( ATT_MIN_SIZE );
                                        // This position must not be in an overlapped box
                                        const SwPosition aPos( *((SwTxtFrm*)pCntnt)->GetTxtNode() );
                                        const SwCursor aTmpCrsr( aPos, 0, false );
                                        SetRowHeight( aTmpCrsr, aNew );
                                        // For the new table model we're done, for the old one
                                        // there might be another (sub)row to adjust...
                                        if( pTable->IsNewModel() )
                                            break;
                                    }
                                    pLine = 0;
                                }
                            }
                        }
                    }
                }
                pFrm = pFrm->GetNextLayoutLeaf();
            }
        }
    }

    GetIDocumentUndoRedo().EndUndo( UNDO_TABLE_ATTR, NULL );

	::ClearFEShellTabCols();
}

/* -----------------18.07.98 11:45-------------------
 *  Direktzugriff fuer UNO
 * --------------------------------------------------*/
void SwDoc::SetTabCols(SwTable& rTab, const SwTabCols &rNew, const SwTabCols &rOld,
								const SwTableBox *pStart, sal_Bool bCurRowOnly )
{
    if (GetIDocumentUndoRedo().DoesUndo())
    {
        GetIDocumentUndoRedo().AppendUndo(
            new SwUndoAttrTbl( *rTab.GetTableNode(), sal_True ));
	}
	rTab.SetTabCols( rNew, rOld, pStart, bCurRowOnly );
  	::ClearFEShellTabCols();
	SetModified();
}

void SwDoc::SetRowsToRepeat( SwTable &rTable, sal_uInt16 nSet )
{
    if( nSet == rTable.GetRowsToRepeat() )
        return;

    if (GetIDocumentUndoRedo().DoesUndo())
    {
        GetIDocumentUndoRedo().AppendUndo(
            new SwUndoTblHeadline(rTable, rTable.GetRowsToRepeat(), nSet) );
    }

    SwMsgPoolItem aChg( RES_TBLHEADLINECHG );
    rTable.SetRowsToRepeat( nSet );
    rTable.GetFrmFmt()->ModifyNotification( &aChg, &aChg );
    SetModified();
}




// Splittet eine Tabelle in der Grund-Zeile, in der der Index steht.
// Alle GrundZeilen dahinter wandern in eine neue Tabelle/-Node.
// Ist das Flag bCalcNewSize auf sal_True, wird fuer beide neuen Tabellen
// die neue Size aus dem Max der Boxen errechnet; vorrausgesetzt,
// die Size ist "absolut" gesetzt (USHRT_MAX)

void SwCollectTblLineBoxes::AddToUndoHistory( const SwCntntNode& rNd )
{
	if( pHst )
		pHst->Add( rNd.GetFmtColl(), rNd.GetIndex(), ND_TEXTNODE );
}

void SwCollectTblLineBoxes::AddBox( const SwTableBox& rBox )
{
	aPosArr.Insert( nWidth, aPosArr.Count() );
	SwTableBox* p = (SwTableBox*)&rBox;
	aBoxes.Insert( p, aBoxes.Count() );
	nWidth = nWidth + (sal_uInt16)rBox.GetFrmFmt()->GetFrmSize().GetWidth();
}

const SwTableBox* SwCollectTblLineBoxes::GetBoxOfPos( const SwTableBox& rBox )
{
	const SwTableBox* pRet = 0;
	sal_uInt16 n;

	if( aPosArr.Count() )
	{
		for( n = 0; n < aPosArr.Count(); ++n )
			if( aPosArr[ n ] == nWidth )
				break;
			else if( aPosArr[ n ] > nWidth )
			{
				if( n )
					--n;
				break;
			}

		if( n >= aPosArr.Count() )
			--n;

		nWidth = nWidth + (sal_uInt16)rBox.GetFrmFmt()->GetFrmSize().GetWidth();
		pRet = aBoxes[ n ];
	}
	return pRet;
}

sal_Bool SwCollectTblLineBoxes::Resize( sal_uInt16 nOffset, sal_uInt16 nOldWidth )
{
	sal_uInt16 n;

	if( aPosArr.Count() )
	{
		for( n = 0; n < aPosArr.Count(); ++n )
			if( aPosArr[ n ] == nOffset )
				break;
			else if( aPosArr[ n ] > nOffset )
			{
				if( n )
					--n;
				break;
			}

		aPosArr.Remove( 0, n );
		aBoxes.Remove( 0, n );

		// dann die Positionen der neuen Size anpassen
		for( n = 0; n < aPosArr.Count(); ++n )
		{
			sal_uLong nSize = nWidth;
			nSize *= ( aPosArr[ n ] - nOffset );
			nSize /= nOldWidth;
			aPosArr[ n ] = sal_uInt16( nSize );
		}
	}
	return 0 != aPosArr.Count();
}

sal_Bool lcl_Line_CollectBox( const SwTableLine*& rpLine, void* pPara )
{
	SwCollectTblLineBoxes* pSplPara = (SwCollectTblLineBoxes*)pPara;
	if( pSplPara->IsGetValues() )
		((SwTableLine*)rpLine)->GetTabBoxes().ForEach( &lcl_Box_CollectBox, pPara );
	else
		((SwTableLine*)rpLine)->GetTabBoxes().ForEach( &lcl_BoxSetSplitBoxFmts, pPara );
	return sal_True;
}

sal_Bool lcl_Box_CollectBox( const SwTableBox*& rpBox, void* pPara )
{
	SwCollectTblLineBoxes* pSplPara = (SwCollectTblLineBoxes*)pPara;
	sal_uInt16 nLen = rpBox->GetTabLines().Count();
	if( nLen )
	{
		// dann mit der richtigen Line weitermachen
		if( pSplPara->IsGetFromTop() )
			nLen = 0;
		else
			--nLen;

		const SwTableLine* pLn = rpBox->GetTabLines()[ nLen ];
		lcl_Line_CollectBox( pLn, pPara );
	}
	else
		pSplPara->AddBox( *rpBox );
	return sal_True;
}

sal_Bool lcl_BoxSetSplitBoxFmts( const SwTableBox*& rpBox, void* pPara )
{
	SwCollectTblLineBoxes* pSplPara = (SwCollectTblLineBoxes*)pPara;
	sal_uInt16 nLen = rpBox->GetTabLines().Count();
	if( nLen )
	{
		// dann mit der richtigen Line weitermachen
		if( pSplPara->IsGetFromTop() )
			nLen = 0;
		else
			--nLen;

		const SwTableLine* pLn = rpBox->GetTabLines()[ nLen ];
		lcl_Line_CollectBox( pLn, pPara );
	}
	else
	{
		const SwTableBox* pSrcBox = pSplPara->GetBoxOfPos( *rpBox );
		SwFrmFmt* pFmt = pSrcBox->GetFrmFmt();
		SwTableBox* pBox = (SwTableBox*)rpBox;

		if( HEADLINE_BORDERCOPY == pSplPara->GetMode() )
		{
			const SvxBoxItem& rBoxItem = pBox->GetFrmFmt()->GetBox();
			if( !rBoxItem.GetTop() )
			{
				SvxBoxItem aNew( rBoxItem );
				aNew.SetLine( pFmt->GetBox().GetBottom(), BOX_LINE_TOP );
				if( aNew != rBoxItem )
                    pBox->ClaimFrmFmt()->SetFmtAttr( aNew );
			}
		}
		else
		{
sal_uInt16 __FAR_DATA aTableSplitBoxSetRange[] = {
	RES_LR_SPACE, 		RES_UL_SPACE,
	RES_BACKGROUND, 	RES_SHADOW,
	RES_PROTECT, 		RES_PROTECT,
	RES_VERT_ORIENT,	RES_VERT_ORIENT,
	0 };
			SfxItemSet aTmpSet( pFmt->GetDoc()->GetAttrPool(),
								aTableSplitBoxSetRange );
			aTmpSet.Put( pFmt->GetAttrSet() );
			if( aTmpSet.Count() )
                pBox->ClaimFrmFmt()->SetFmtAttr( aTmpSet );

			if( HEADLINE_BOXATRCOLLCOPY == pSplPara->GetMode() )
			{
				SwNodeIndex aIdx( *pSrcBox->GetSttNd(), 1 );
				SwCntntNode* pCNd = aIdx.GetNode().GetCntntNode();
				if( !pCNd )
					pCNd = aIdx.GetNodes().GoNext( &aIdx );
				aIdx = *pBox->GetSttNd();
				SwCntntNode* pDNd = aIdx.GetNodes().GoNext( &aIdx );

				// nur wenn der Node alleine in der Section steht
				if( 2 == pDNd->EndOfSectionIndex() -
						pDNd->StartOfSectionIndex() )
				{
					pSplPara->AddToUndoHistory( *pDNd );
					pDNd->ChgFmtColl( pCNd->GetFmtColl() );
				}
			}

			// bedingte Vorlage beachten
			pBox->GetSttNd()->CheckSectionCondColl();
		}
	}
	return sal_True;
}


sal_Bool SwDoc::SplitTable( const SwPosition& rPos, sal_uInt16 eHdlnMode,
						sal_Bool bCalcNewSize )
{
	SwNode* pNd = &rPos.nNode.GetNode();
	SwTableNode* pTNd = pNd->FindTableNode();
	if( !pTNd || pNd->IsTableNode() )
		return 0;

	if( pTNd->GetTable().ISA( SwDDETable ))
		return sal_False;

	SwTable& rTbl = pTNd->GetTable();
	rTbl.SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	SwTableFmlUpdate aMsgHnt( &rTbl );

	SwHistory aHistory;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
		aMsgHnt.pHistory = &aHistory;
    }

	{
		sal_uLong nSttIdx = pNd->FindTableBoxStartNode()->GetIndex();

		// Suche die Grund-Line dieser Box:
		SwTableBox* pBox = rTbl.GetTblBox( nSttIdx );
		if( pBox )
		{
			SwTableLine* pLine = pBox->GetUpper();
			while( pLine->GetUpper() )
				pLine = pLine->GetUpper()->GetUpper();

			// in pLine steht jetzt die GrundLine.
			aMsgHnt.nSplitLine = rTbl.GetTabLines().C40_GETPOS( SwTableLine, pLine );
		}

		String sNewTblNm( GetUniqueTblName() );
		aMsgHnt.DATA.pNewTblNm = &sNewTblNm;
		aMsgHnt.eFlags = TBL_SPLITTBL;
		UpdateTblFlds( &aMsgHnt );
	}

	//Lines fuer das Layout-Update heraussuchen.
	_FndBox aFndBox( 0, 0 );
    aFndBox.SetTableLines( rTbl );
    aFndBox.DelFrms( rTbl );

    // TL_CHART2: need to inform chart of probably changed cell names
    //pDoc->UpdateCharts( rTbl.GetFrmFmt()->GetName() );

	SwTableNode* pNew = GetNodes().SplitTable( rPos.nNode, sal_False, bCalcNewSize );

	if( pNew )
	{
        SwSaveRowSpan* pSaveRowSp = pNew->GetTable().CleanUpTopRowSpan( rTbl.GetTabLines().Count() );
		SwUndoSplitTbl* pUndo = 0;
        if (GetIDocumentUndoRedo().DoesUndo())
        {
            pUndo = new SwUndoSplitTbl(
                        *pNew, pSaveRowSp, eHdlnMode, bCalcNewSize);
            GetIDocumentUndoRedo().AppendUndo(pUndo);
			if( aHistory.Count() )
				pUndo->SaveFormula( aHistory );
		}

		switch( eHdlnMode )
		{
			// setze die untere Border der vorherige Line,
			// an der aktuellen als obere
		case HEADLINE_BORDERCOPY:
			{
				SwCollectTblLineBoxes aPara( sal_False, eHdlnMode );
				SwTableLine* pLn = rTbl.GetTabLines()[
							rTbl.GetTabLines().Count() - 1 ];
				pLn->GetTabBoxes().ForEach( &lcl_Box_CollectBox, &aPara );

				aPara.SetValues( sal_True );
				pLn = pNew->GetTable().GetTabLines()[ 0 ];
				pLn->GetTabBoxes().ForEach( &lcl_BoxSetSplitBoxFmts, &aPara );

				// Kopfzeile wiederholen abschalten
                pNew->GetTable().SetRowsToRepeat( 0 );
			}
			break;

			// setze die Attributierung der ersten Line an der neuen ersten
		case HEADLINE_BOXATTRCOPY:
		case HEADLINE_BOXATRCOLLCOPY:
			{
				SwHistory* pHst = 0;
				if( HEADLINE_BOXATRCOLLCOPY == eHdlnMode && pUndo )
					pHst = pUndo->GetHistory();

				SwCollectTblLineBoxes aPara( sal_True, eHdlnMode, pHst );
				SwTableLine* pLn = rTbl.GetTabLines()[ 0 ];
				pLn->GetTabBoxes().ForEach( &lcl_Box_CollectBox, &aPara );

				aPara.SetValues( sal_True );
				pLn = pNew->GetTable().GetTabLines()[ 0 ];
				pLn->GetTabBoxes().ForEach( &lcl_BoxSetSplitBoxFmts, &aPara );
			}
			break;

		case HEADLINE_CNTNTCOPY:
			rTbl.CopyHeadlineIntoTable( *pNew );
			if( pUndo )
				pUndo->SetTblNodeOffset( pNew->GetIndex() );
			break;

		case HEADLINE_NONE:
			// Kopfzeile wiederholen abschalten
            pNew->GetTable().SetRowsToRepeat( 0 );
			break;
		}

		// und Frms einfuegen.
		SwNodeIndex aNdIdx( *pNew->EndOfSectionNode() );
		GetNodes().GoNext( &aNdIdx );      // zum naechsten ContentNode
		pNew->MakeFrms( &aNdIdx );

		//Zwischen die Tabellen wird ein Absatz geschoben
		GetNodes().MakeTxtNode( SwNodeIndex( *pNew ),
								GetTxtCollFromPool( RES_POOLCOLL_TEXT ) );
	}

	//Layout updaten
    aFndBox.MakeFrms( rTbl );

    // TL_CHART2: need to inform chart of probably changed cell names
    UpdateCharts( rTbl.GetFrmFmt()->GetName() );

    SetFieldsDirty( true, NULL, 0 );

	return 0 != pNew;
}

sal_Bool lcl_ChgTblSize( SwTable& rTbl )
{
	// das Attribut darf nicht ueber das Modify an der
	// Tabelle gesetzt werden, denn sonst werden alle
	// Boxen wieder auf 0 zurueck gesetzt. Also locke das Format
	SwFrmFmt* pFmt = rTbl.GetFrmFmt();
	SwFmtFrmSize aTblMaxSz( pFmt->GetFrmSize() );

	if( USHRT_MAX == aTblMaxSz.GetWidth() )
		return sal_False;

	sal_Bool bLocked = pFmt->IsModifyLocked();
	pFmt->LockModify();

	aTblMaxSz.SetWidth( 0 );

	SwTableLines& rLns = rTbl.GetTabLines();
	for( sal_uInt16 nLns = 0; nLns < rLns.Count(); ++nLns )
	{
		SwTwips nMaxLnWidth = 0;
		SwTableBoxes& rBoxes = rLns[ nLns ]->GetTabBoxes();
		for( sal_uInt16 nBox = 0; nBox < rBoxes.Count(); ++nBox )
			nMaxLnWidth += rBoxes[nBox]->GetFrmFmt()->GetFrmSize().GetWidth();

		if( nMaxLnWidth > aTblMaxSz.GetWidth() )
			aTblMaxSz.SetWidth( nMaxLnWidth );
	}
    pFmt->SetFmtAttr( aTblMaxSz );
	if( !bLocked )			// und gegebenenfalls Lock wieder freigeben
		pFmt->UnlockModify();

	return sal_True;
}

class _SplitTable_Para
{
	SvPtrarr aSrc, aDest;
	SwTableNode* pNewTblNd;
	SwTable& rOldTbl;

public:
	_SplitTable_Para( SwTableNode* pNew, SwTable& rOld )
		: aSrc( 16, 16 ), aDest( 16, 16 ), pNewTblNd( pNew ), rOldTbl( rOld )
	{}
	sal_uInt16 SrcFmt_GetPos( void* pFmt ) const
			{ return aSrc.GetPos( pFmt ); }

	void DestFmt_Insert( void* pFmt )
			{ aDest.Insert( pFmt, aDest.Count() ); }

	void SrcFmt_Insert( void* pFmt )
			{ aSrc.Insert( pFmt, aSrc.Count() ); }

	SwFrmFmt* DestFmt_Get( sal_uInt16 nPos ) const
			{ return (SwFrmFmt*)aDest[ nPos ]; }

	void ChgBox( SwTableBox* pBox )
	{
		rOldTbl.GetTabSortBoxes().Remove( pBox );
		pNewTblNd->GetTable().GetTabSortBoxes().Insert( pBox );
	}
};


sal_Bool lcl_SplitTable_CpyBox( const SwTableBox*& rpBox, void* pPara );

sal_Bool lcl_SplitTable_CpyLine( const SwTableLine*& rpLine, void* pPara )
{
	SwTableLine* pLn = (SwTableLine*)rpLine;
	_SplitTable_Para& rPara = *(_SplitTable_Para*)pPara;

	SwFrmFmt *pSrcFmt = pLn->GetFrmFmt();
	sal_uInt16 nPos = rPara.SrcFmt_GetPos( pSrcFmt );
	if( USHRT_MAX == nPos )
	{
		rPara.DestFmt_Insert( pLn->ClaimFrmFmt() );
		rPara.SrcFmt_Insert( pSrcFmt );
	}
	else
		pLn->ChgFrmFmt( (SwTableLineFmt*)rPara.DestFmt_Get( nPos ) );

	pLn->GetTabBoxes().ForEach( &lcl_SplitTable_CpyBox, pPara );
	return sal_True;
}

sal_Bool lcl_SplitTable_CpyBox( const SwTableBox*& rpBox, void* pPara )
{
	SwTableBox* pBox = (SwTableBox*)rpBox;
	_SplitTable_Para& rPara = *(_SplitTable_Para*)pPara;

	SwFrmFmt *pSrcFmt = pBox->GetFrmFmt();
	sal_uInt16 nPos = rPara.SrcFmt_GetPos( pSrcFmt );
	if( USHRT_MAX == nPos )
	{
		rPara.DestFmt_Insert( pBox->ClaimFrmFmt() );
		rPara.SrcFmt_Insert( pSrcFmt );
	}
	else
		pBox->ChgFrmFmt( (SwTableBoxFmt*)rPara.DestFmt_Get( nPos ) );

	if( pBox->GetSttNd() )
		rPara.ChgBox( pBox );
	else
		pBox->GetTabLines().ForEach( &lcl_SplitTable_CpyLine, pPara );
	return sal_True;
}

SwTableNode* SwNodes::SplitTable( const SwNodeIndex& rPos, sal_Bool bAfter,
									sal_Bool bCalcNewSize )
{
	SwNode* pNd = &rPos.GetNode();
	SwTableNode* pTNd = pNd->FindTableNode();
	if( !pTNd || pNd->IsTableNode() )
		return 0;

	sal_uLong nSttIdx = pNd->FindTableBoxStartNode()->GetIndex();

	// Suche die Grund-Line dieser Box:
	SwTable& rTbl = pTNd->GetTable();
	SwTableBox* pBox = rTbl.GetTblBox( nSttIdx );
	if( !pBox )
		return 0;

	SwTableLine* pLine = pBox->GetUpper();
	while( pLine->GetUpper() )
		pLine = pLine->GetUpper()->GetUpper();

	// in pLine steht jetzt die GrundLine.
	sal_uInt16 nLinePos = rTbl.GetTabLines().C40_GETPOS( SwTableLine, pLine );
	if( USHRT_MAX == nLinePos ||
		( bAfter ? ++nLinePos >= rTbl.GetTabLines().Count() : !nLinePos ))
		return 0;		// nicht gefunden oder letze Line !!

	// Suche jetzt die 1. Box der nachfolgenden Line
	SwTableLine* pNextLine = rTbl.GetTabLines()[ nLinePos ];
	pBox = pNextLine->GetTabBoxes()[0];
	while( !pBox->GetSttNd() )
		pBox = pBox->GetTabLines()[0]->GetTabBoxes()[0];

	// dann fuege mal einen End- und TabelleNode ins Nodes-Array ein.
	SwTableNode * pNewTblNd;
	{
		SwEndNode* pOldTblEndNd = (SwEndNode*)pTNd->EndOfSectionNode()->GetEndNode();
		ASSERT( pOldTblEndNd, "wo ist der EndNode?" )

		SwNodeIndex aIdx( *pBox->GetSttNd() );
		new SwEndNode( aIdx, *pTNd );
		pNewTblNd = new SwTableNode( aIdx );
        pNewTblNd->GetTable().SetTableModel( rTbl.IsNewModel() );

		pOldTblEndNd->pStartOfSection = pNewTblNd;
		pNewTblNd->pEndOfSection = pOldTblEndNd;

		SwNode* pBoxNd = aIdx.GetNode().GetStartNode();
		do {
			ASSERT( pBoxNd->IsStartNode(), "das muss ein StartNode sein!" );
			pBoxNd->pStartOfSection = pNewTblNd;
			pBoxNd = (*this)[ pBoxNd->EndOfSectionIndex() + 1 ];
		} while( pBoxNd != pOldTblEndNd );
	}

	{
        // die Lines ruebermoven...
		SwTable& rNewTbl = pNewTblNd->GetTable();
		rNewTbl.GetTabLines().Insert( &rTbl.GetTabLines(), 0, nLinePos );
        //
        // von hinten (unten-rechts) nach vorn (oben-links) alle Boxen
        // beim chart data provider austragen (das modified event wird dann
        // in der aufrufenden Funktion getriggert.
        // TL_CHART2:
        SwChartDataProvider *pPCD = rTbl.GetFrmFmt()->getIDocumentChartDataProviderAccess()->GetChartDataProvider();
        if( pPCD )
        {
            for (sal_uInt16 k = nLinePos;  k < rTbl.GetTabLines().Count();  ++k)
            {
                sal_uInt16 nLineIdx = (rTbl.GetTabLines().Count() - 1) - k + nLinePos;
                sal_uInt16 nBoxCnt = rTbl.GetTabLines()[ nLineIdx ]->GetTabBoxes().Count();
                for (sal_uInt16 j = 0;  j < nBoxCnt;  ++j)
                {
                    sal_uInt16 nIdx = nBoxCnt - 1 - j;
                    pPCD->DeleteBox( &rTbl, *rTbl.GetTabLines()[ nLineIdx ]->GetTabBoxes()[nIdx] );
                }
            }
        }
        //
        // ...und loeschen
        sal_uInt16 nDeleted = rTbl.GetTabLines().Count() - nLinePos;
		rTbl.GetTabLines().Remove( nLinePos, nDeleted );

		// und die betr. Boxen verschieben. Dabei die Formate eindeutig
		// machen und die StartNodes korrigieren
		_SplitTable_Para aPara( pNewTblNd, rTbl );
		rNewTbl.GetTabLines().ForEach( &lcl_SplitTable_CpyLine, &aPara );
        rTbl.CleanUpBottomRowSpan( nDeleted );
	}

	{
		// Das Tabellen-FrmFormat kopieren
		SwFrmFmt* pOldTblFmt = rTbl.GetFrmFmt();
		SwFrmFmt* pNewTblFmt = pOldTblFmt->GetDoc()->MakeTblFrmFmt(
								pOldTblFmt->GetDoc()->GetUniqueTblName(),
								pOldTblFmt->GetDoc()->GetDfltFrmFmt() );

		*pNewTblFmt = *pOldTblFmt;
        pNewTblNd->GetTable().RegisterToFormat( *pNewTblFmt );

		// neue Size errechnen ? (lcl_ChgTblSize nur das 2. aufrufen, wenn es
		// beim 1. schon geklappt hat; also absolute Groesse hat)
		if( bCalcNewSize && lcl_ChgTblSize( rTbl ) )
			lcl_ChgTblSize( pNewTblNd->GetTable() );
	}

    // TL_CHART2: need to inform chart of probably changed cell names
    rTbl.UpdateCharts();

	return pNewTblNd;		// das wars
}

// und die Umkehrung davon. rPos muss in der Tabelle stehen, die bestehen
// bleibt. Das Flag besagt ob die aktuelle mit der davor oder dahinter
// stehenden vereint wird.
sal_Bool SwDoc::MergeTable( const SwPosition& rPos, sal_Bool bWithPrev, sal_uInt16 nMode )
{
	SwTableNode* pTblNd = rPos.nNode.GetNode().FindTableNode(), *pDelTblNd;
	if( !pTblNd )
		return sal_False;

	SwNodes& rNds = GetNodes();
	if( bWithPrev )
		pDelTblNd = rNds[ pTblNd->GetIndex() - 1 ]->FindTableNode();
	else
		pDelTblNd = rNds[ pTblNd->EndOfSectionIndex() + 1 ]->GetTableNode();
	if( !pDelTblNd )
		return sal_False;

	if( pTblNd->GetTable().ISA( SwDDETable ) ||
		pDelTblNd->GetTable().ISA( SwDDETable ))
		return sal_False;

	// MIB 9.7.97: HTML-Layout loeschen
	pTblNd->GetTable().SetHTMLTableLayout( 0 );
	pDelTblNd->GetTable().SetHTMLTableLayout( 0 );

	// beide Tabellen vorhanden, also kanns losgehen
	SwUndoMergeTbl* pUndo = 0;
	SwHistory* pHistory = 0;
    if (GetIDocumentUndoRedo().DoesUndo())
    {
        pUndo = new SwUndoMergeTbl( *pTblNd, *pDelTblNd, bWithPrev, nMode );
        GetIDocumentUndoRedo().AppendUndo(pUndo);
		pHistory = new SwHistory;
	}

	// alle "Tabellenformeln" anpassen
	SwTableFmlUpdate aMsgHnt( &pTblNd->GetTable() );
	aMsgHnt.DATA.pDelTbl = &pDelTblNd->GetTable();
	aMsgHnt.eFlags = TBL_MERGETBL;
	aMsgHnt.pHistory = pHistory;
	UpdateTblFlds( &aMsgHnt );

	// das eigentliche Mergen
	SwNodeIndex aIdx( bWithPrev ? *pTblNd : *pDelTblNd );
	sal_Bool bRet = rNds.MergeTable( aIdx, !bWithPrev, nMode, pHistory );

	if( pHistory )
	{
		if( pHistory->Count() )
			pUndo->SaveFormula( *pHistory );
		delete pHistory;
	}
	if( bRet )
	{
		SetModified();
		SetFieldsDirty( true, NULL, 0 );
	}
	return bRet;
}

sal_Bool SwNodes::MergeTable( const SwNodeIndex& rPos, sal_Bool bWithPrev,
							sal_uInt16 nMode, SwHistory* )
{
	SwTableNode* pDelTblNd = rPos.GetNode().GetTableNode();
	ASSERT( pDelTblNd, "wo ist der TableNode geblieben?" );

	SwTableNode* pTblNd = (*this)[ rPos.GetIndex() - 1]->FindTableNode();
	ASSERT( pTblNd, "wo ist der TableNode geblieben?" );

	if( !pDelTblNd || !pTblNd )
		return sal_False;

	pDelTblNd->DelFrms();

	SwTable& rDelTbl = pDelTblNd->GetTable();
	SwTable& rTbl = pTblNd->GetTable();

	//Lines fuer das Layout-Update herausuchen.
	_FndBox aFndBox( 0, 0 );
    aFndBox.SetTableLines( rTbl );
    aFndBox.DelFrms( rTbl );

    // TL_CHART2: since chart currently does not want to get informed about
    // additional rows/cols there is no need for a modified event in the
    // remaining first table. Also, if it is required it  should be done
    // after the merging and not here...
    // pDoc->UpdateCharts( rTbl.GetFrmFmt()->GetName() );


    // TL_CHART2:
    // tell the charts about the table to be deleted and have them use their own data
    GetDoc()->CreateChartInternalDataProviders( &rDelTbl );

	// die Breite der TabellenFormate abgleichen:
	{
		const SwFmtFrmSize& rTblSz = rTbl.GetFrmFmt()->GetFrmSize();
		const SwFmtFrmSize& rDelTblSz = rDelTbl.GetFrmFmt()->GetFrmSize();
		if( rTblSz != rDelTblSz )
		{
			// dann sollten die mal schleunigst korrigiert werden
			if( bWithPrev )
                rDelTbl.GetFrmFmt()->SetFmtAttr( rTblSz );
			else
                rTbl.GetFrmFmt()->SetFmtAttr( rDelTblSz );
		}
	}

	if( !bWithPrev )
	{
		// dann mussen alle Attruibute der hinteren Tabelle auf die
		// vordere uebertragen werden, weil die hintere ueber das loeschen
		// des Node geloescht wird.
        rTbl.SetRowsToRepeat( rDelTbl.GetRowsToRepeat() );
		rTbl.SetTblChgMode( rDelTbl.GetTblChgMode() );

		rTbl.GetFrmFmt()->LockModify();
		*rTbl.GetFrmFmt() = *rDelTbl.GetFrmFmt();
		// auch den Namen umsetzen!
		rTbl.GetFrmFmt()->SetName( rDelTbl.GetFrmFmt()->GetName() );
		rTbl.GetFrmFmt()->UnlockModify();
	}

	// die Lines und Boxen ruebermoven
	sal_uInt16 nOldSize = rTbl.GetTabLines().Count();
	rTbl.GetTabLines().Insert( &rDelTbl.GetTabLines(), nOldSize );
	rDelTbl.GetTabLines().Remove( 0, rDelTbl.GetTabLines().Count() );

	rTbl.GetTabSortBoxes().Insert( &rDelTbl.GetTabSortBoxes() );
	rDelTbl.GetTabSortBoxes().Remove( (sal_uInt16)0, rDelTbl.GetTabSortBoxes().Count() );

	// die vordere Tabelle bleibt immer stehen, die hintere wird geloescht
	SwEndNode* pTblEndNd = pDelTblNd->EndOfSectionNode();
	pTblNd->pEndOfSection = pTblEndNd;

	SwNodeIndex aIdx( *pDelTblNd, 1 );

	SwNode* pBoxNd = aIdx.GetNode().GetStartNode();
	do {
		ASSERT( pBoxNd->IsStartNode(), "das muss ein StartNode sein!" );
		pBoxNd->pStartOfSection = pTblNd;
		pBoxNd = (*this)[ pBoxNd->EndOfSectionIndex() + 1 ];
	} while( pBoxNd != pTblEndNd );
	pBoxNd->pStartOfSection = pTblNd;

	aIdx -= 2;
	DelNodes( aIdx, 2 );

	// jetzt an der 1. eingefuegten Line die bedingten Vorlagen umschubsen
	const SwTableLine* pFirstLn = rTbl.GetTabLines()[ nOldSize ];
	if( 1 == nMode )		//
	{
		// Header-Vorlagen in der Zeile setzen
		// und ggfs. in der History speichern fuers Undo!!!
	}
	lcl_LineSetHeadCondColl( pFirstLn, 0 );

	// und die Borders "aufrauemen"
	if( nOldSize )
	{
		_SwGCLineBorder aPara( rTbl );
		aPara.nLinePos = --nOldSize;
		pFirstLn = rTbl.GetTabLines()[ nOldSize ];
		lcl_GC_Line_Border( pFirstLn, &aPara );
	}

	//Layout updaten
    aFndBox.MakeFrms( rTbl );

    return sal_True;
}

// -------------------------------------------------------------------


// -- benutze die ForEach Methode vom PtrArray
struct _SetAFmtTabPara
{
	SwTableAutoFmt& rTblFmt;
	SwUndoTblAutoFmt* pUndo;
	sal_uInt16 nEndBox, nCurBox;
	sal_uInt8 nAFmtLine, nAFmtBox;

	_SetAFmtTabPara( const SwTableAutoFmt& rNew )
		: rTblFmt( (SwTableAutoFmt&)rNew ), pUndo( 0 ),
		nEndBox( 0 ), nCurBox( 0 ), nAFmtLine( 0 ), nAFmtBox( 0 )
	{}
};

// forward deklarieren damit sich die Lines und Boxen rekursiv aufrufen
// koennen.
sal_Bool lcl_SetAFmtBox( const _FndBox*&, void *pPara );
sal_Bool lcl_SetAFmtLine( const _FndLine*&, void *pPara );

sal_Bool lcl_SetAFmtLine( const _FndLine*& rpLine, void *pPara )
{
	((_FndLine*&)rpLine)->GetBoxes().ForEach( &lcl_SetAFmtBox, pPara );
	return sal_True;
}

sal_Bool lcl_SetAFmtBox( const _FndBox*& rpBox, void *pPara )
{
	_SetAFmtTabPara* pSetPara = (_SetAFmtTabPara*)pPara;

	if( !rpBox->GetUpper()->GetUpper() )	// Box auf 1. Ebene ?
	{
		if( !pSetPara->nCurBox )
			pSetPara->nAFmtBox = 0;
		else if( pSetPara->nCurBox == pSetPara->nEndBox )
			pSetPara->nAFmtBox = 3;
		else
			pSetPara->nAFmtBox = (sal_uInt8)(1 + ((pSetPara->nCurBox-1) & 1));
	}

	if( rpBox->GetBox()->GetSttNd() )
	{
		SwTableBox* pSetBox = (SwTableBox*)rpBox->GetBox();
		SwDoc* pDoc = pSetBox->GetFrmFmt()->GetDoc();
        // --> OD 2008-02-25 #refactorlists#
//        SfxItemSet aCharSet( pDoc->GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_END-1 );
        SfxItemSet aCharSet( pDoc->GetAttrPool(), RES_CHRATR_BEGIN, RES_PARATR_LIST_END-1 );
        // <--
		SfxItemSet aBoxSet( pDoc->GetAttrPool(), aTableBoxSetRange );
		sal_uInt8 nPos = pSetPara->nAFmtLine * 4 + pSetPara->nAFmtBox;
		pSetPara->rTblFmt.UpdateToSet( nPos, aCharSet,
										SwTableAutoFmt::UPDATE_CHAR, 0 );
		pSetPara->rTblFmt.UpdateToSet( nPos, aBoxSet,
										SwTableAutoFmt::UPDATE_BOX,
										pDoc->GetNumberFormatter( sal_True ) );
		if( aCharSet.Count() )
		{
			sal_uLong nSttNd = pSetBox->GetSttIdx()+1;
			sal_uLong nEndNd = pSetBox->GetSttNd()->EndOfSectionIndex();
			for( ; nSttNd < nEndNd; ++nSttNd )
			{
				SwCntntNode* pNd = pDoc->GetNodes()[ nSttNd ]->GetCntntNode();
				if( pNd )
					pNd->SetAttr( aCharSet );
			}
		}

		if( aBoxSet.Count() )
		{
			if( pSetPara->pUndo &&
				SFX_ITEM_SET == aBoxSet.GetItemState( RES_BOXATR_FORMAT ))
				pSetPara->pUndo->SaveBoxCntnt( *pSetBox );

            pSetBox->ClaimFrmFmt()->SetFmtAttr( aBoxSet );
		}
	}
	else
		((_FndBox*&)rpBox)->GetLines().ForEach( &lcl_SetAFmtLine, pPara );

	if( !rpBox->GetUpper()->GetUpper() )		// eine BaseLine
		++pSetPara->nCurBox;
	return sal_True;
}


		// AutoFormat fuer die Tabelle/TabellenSelection
sal_Bool SwDoc::SetTableAutoFmt( const SwSelBoxes& rBoxes, const SwTableAutoFmt& rNew )
{
	ASSERT( rBoxes.Count(), "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( rBoxes, &aFndBox );
		pTblNd->GetTable().GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	pTblNd->GetTable().SetHTMLTableLayout( 0 );

	_FndBox* pFndBox = &aFndBox;
	while( 1 == pFndBox->GetLines().Count() &&
			1 == pFndBox->GetLines()[0]->GetBoxes().Count() )
		pFndBox = pFndBox->GetLines()[0]->GetBoxes()[0];

	if( !pFndBox->GetLines().Count() )		// eine zu weit? (nur 1 sel.Box)
		pFndBox = pFndBox->GetUpper()->GetUpper();


	// Undo abschalten, Attribute werden sich vorher gemerkt
	SwUndoTblAutoFmt* pUndo = 0;
    bool const bUndo(GetIDocumentUndoRedo().DoesUndo());
    if (bUndo)
    {
        pUndo = new SwUndoTblAutoFmt( *pTblNd, rNew );
        GetIDocumentUndoRedo().AppendUndo(pUndo);
        GetIDocumentUndoRedo().DoUndo(false);
    }

	_SetAFmtTabPara aPara( rNew );
	_FndLines& rFLns = pFndBox->GetLines();
	_FndLine* pLine;

	for( sal_uInt16 n = 0; n < rFLns.Count(); ++n )
	{
		pLine = rFLns[n];

		// Upper auf 0 setzen (Base-Line simulieren!)
		_FndBox* pSaveBox = pLine->GetUpper();
		pLine->SetUpper( 0 );

		if( !n )
			aPara.nAFmtLine = 0;
		else if( n+1 == rFLns.Count() )
			aPara.nAFmtLine = 3;
		else
			aPara.nAFmtLine = (sal_uInt8)(1 + ((n-1) & 1 ));

		aPara.nAFmtBox = 0;
		aPara.nCurBox = 0;
		aPara.nEndBox = pLine->GetBoxes().Count()-1;
		aPara.pUndo = pUndo;
		pLine->GetBoxes().ForEach( &lcl_SetAFmtBox, &aPara );

		pLine->SetUpper( pSaveBox );
	}

	if( pUndo )
    {
        GetIDocumentUndoRedo().DoUndo(bUndo);
    }

	SetModified();
	SetFieldsDirty( true, NULL, 0 );

	return sal_True;
}


		// Erfrage wie attributiert ist
sal_Bool SwDoc::GetTableAutoFmt( const SwSelBoxes& rBoxes, SwTableAutoFmt& rGet )
{
	ASSERT( rBoxes.Count(), "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( rBoxes, &aFndBox );
		pTblNd->GetTable().GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	_FndBox* pFndBox = &aFndBox;
	while( 1 == pFndBox->GetLines().Count() &&
			1 == pFndBox->GetLines()[0]->GetBoxes().Count() )
		pFndBox = pFndBox->GetLines()[0]->GetBoxes()[0];

	if( !pFndBox->GetLines().Count() )		// eine zu weit? (nur 1 sel.Box)
		pFndBox = pFndBox->GetUpper()->GetUpper();

	_FndLines& rFLns = pFndBox->GetLines();

	sal_uInt16 aLnArr[4];
	aLnArr[0] = 0;
	aLnArr[1] = 1 < rFLns.Count() ? 1 : 0;
	aLnArr[2] = 2 < rFLns.Count() ? 2 : aLnArr[1];
	aLnArr[3] = rFLns.Count() - 1;

	for( sal_uInt8 nLine = 0; nLine < 4; ++nLine )
	{
		_FndLine& rLine = *rFLns[ aLnArr[ nLine ] ];

		sal_uInt16 aBoxArr[4];
		aBoxArr[0] = 0;
		aBoxArr[1] = 1 < rLine.GetBoxes().Count() ? 1 : 0;
		aBoxArr[2] = 2 < rLine.GetBoxes().Count() ? 2 : aBoxArr[1];
		aBoxArr[3] = rLine.GetBoxes().Count() - 1;

		for( sal_uInt8 nBox = 0; nBox < 4; ++nBox )
		{
			SwTableBox* pFBox = rLine.GetBoxes()[ aBoxArr[ nBox ] ]->GetBox();
			// immer auf die 1. runterfallen
			while( !pFBox->GetSttNd() )
				pFBox = pFBox->GetTabLines()[0]->GetTabBoxes()[0];

			sal_uInt8 nPos = nLine * 4 + nBox;
			SwNodeIndex aIdx( *pFBox->GetSttNd(), 1 );
			SwCntntNode* pCNd = aIdx.GetNode().GetCntntNode();
			if( !pCNd )
				pCNd = GetNodes().GoNext( &aIdx );

			if( pCNd )
				rGet.UpdateFromSet( nPos, pCNd->GetSwAttrSet(),
									SwTableAutoFmt::UPDATE_CHAR, 0 );
			rGet.UpdateFromSet( nPos, pFBox->GetFrmFmt()->GetAttrSet(),
								SwTableAutoFmt::UPDATE_BOX,
								GetNumberFormatter( sal_True ) );
		}
	}

	return sal_True;
}

String SwDoc::GetUniqueTblName() const
{
	ResId aId( STR_TABLE_DEFNAME, *pSwResMgr );
	String aName( aId );
	xub_StrLen nNmLen = aName.Len();

	sal_uInt16 nNum, nTmp, nFlagSize = ( pTblFrmFmtTbl->Count() / 8 ) +2;
	sal_uInt16 n;

	sal_uInt8* pSetFlags = new sal_uInt8[ nFlagSize ];
	memset( pSetFlags, 0, nFlagSize );

	for( n = 0; n < pTblFrmFmtTbl->Count(); ++n )
	{
		const SwFrmFmt* pFmt = (*pTblFrmFmtTbl)[ n ];
		if( !pFmt->IsDefault() && IsUsed( *pFmt )  &&
			pFmt->GetName().Match( aName ) == nNmLen )
		{
			// Nummer bestimmen und das Flag setzen
			nNum = static_cast<sal_uInt16>(pFmt->GetName().Copy( nNmLen ).ToInt32());
			if( nNum-- && nNum < pTblFrmFmtTbl->Count() )
				pSetFlags[ nNum / 8 ] |= (0x01 << ( nNum & 0x07 ));
		}
	}

	// alle Nummern entsprechend geflag, also bestimme die richtige Nummer
	nNum = pTblFrmFmtTbl->Count();
	for( n = 0; n < nFlagSize; ++n )
		if( 0xff != ( nTmp = pSetFlags[ n ] ))
		{
			// also die Nummer bestimmen
			nNum = n * 8;
			while( nTmp & 1 )
				++nNum, nTmp >>= 1;
			break;
		}

	delete [] pSetFlags;
	return aName += String::CreateFromInt32( ++nNum );
}

SwTableFmt* SwDoc::FindTblFmtByName( const String& rName, sal_Bool bAll ) const
{
	const SwFmt* pRet = 0;
	if( bAll )
		pRet = FindFmtByName( (SvPtrarr&)*pTblFrmFmtTbl, rName );
	else
	{
		// dann nur die, die im Doc gesetzt sind
		for( sal_uInt16 n = 0; n < pTblFrmFmtTbl->Count(); ++n )
		{
			const SwFrmFmt* pFmt = (*pTblFrmFmtTbl)[ n ];
			if( !pFmt->IsDefault() && IsUsed( *pFmt ) &&
				pFmt->GetName() == rName )
			{
				pRet = pFmt;
				break;
			}
		}
	}
	return (SwTableFmt*)pRet;
}

sal_Bool SwDoc::SetColRowWidthHeight( SwTableBox& rAktBox, sal_uInt16 eType,
									SwTwips nAbsDiff, SwTwips nRelDiff )
{
	SwTableNode* pTblNd = (SwTableNode*)rAktBox.GetSttNd()->FindTableNode();
	SwUndo* pUndo = 0;

	if( nsTblChgWidthHeightType::WH_FLAG_INSDEL & eType && pTblNd->GetTable().ISA( SwDDETable ))
		return sal_False;

	SwTableFmlUpdate aMsgHnt( &pTblNd->GetTable() );
	aMsgHnt.eFlags = TBL_BOXPTR;
	UpdateTblFlds( &aMsgHnt );

    bool const bUndo(GetIDocumentUndoRedo().DoesUndo());
	sal_Bool bRet = sal_False;
	switch( eType & 0xff )
	{
	case nsTblChgWidthHeightType::WH_COL_LEFT:
	case nsTblChgWidthHeightType::WH_COL_RIGHT:
	case nsTblChgWidthHeightType::WH_CELL_LEFT:
	case nsTblChgWidthHeightType::WH_CELL_RIGHT:
		{
			 bRet = pTblNd->GetTable().SetColWidth( rAktBox,
								eType, nAbsDiff, nRelDiff,
                                (bUndo) ? &pUndo : 0 );
        }
		break;
	case nsTblChgWidthHeightType::WH_ROW_TOP:
	case nsTblChgWidthHeightType::WH_ROW_BOTTOM:
	case nsTblChgWidthHeightType::WH_CELL_TOP:
	case nsTblChgWidthHeightType::WH_CELL_BOTTOM:
		bRet = pTblNd->GetTable().SetRowHeight( rAktBox,
							eType, nAbsDiff, nRelDiff,
                            (bUndo) ? &pUndo : 0 );
		break;
	}

    GetIDocumentUndoRedo().DoUndo(bUndo); // SetColWidth can turn it off
	if( pUndo )
    {
        GetIDocumentUndoRedo().AppendUndo( pUndo );
    }

	if( bRet )
	{
		SetModified();
		if( nsTblChgWidthHeightType::WH_FLAG_INSDEL & eType )
			SetFieldsDirty( true, NULL, 0 );
	}
	return bRet;
}


void SwDoc::ChkBoxNumFmt( SwTableBox& rBox, sal_Bool bCallUpdate )
{
	//JP 09.07.97: Optimierung: wenn die Box schon sagt, das es Text
	//							sein soll, dann bleibt das auch Text!
	const SfxPoolItem* pNumFmtItem = 0;
	if( SFX_ITEM_SET == rBox.GetFrmFmt()->GetItemState( RES_BOXATR_FORMAT,
		sal_False, &pNumFmtItem ) && GetNumberFormatter()->IsTextFormat(
			((SwTblBoxNumFormat*)pNumFmtItem)->GetValue() ))
		return ;

	SwUndoTblNumFmt* pUndo = 0;

	sal_Bool bIsEmptyTxtNd, bChgd = sal_True;
	sal_uInt32 nFmtIdx;
	double fNumber;
	if( rBox.HasNumCntnt( fNumber, nFmtIdx, bIsEmptyTxtNd ) )
	{
		if( !rBox.IsNumberChanged() )
			bChgd = sal_False;
		else
		{
            if (GetIDocumentUndoRedo().DoesUndo())
            {
                GetIDocumentUndoRedo().StartUndo( UNDO_TABLE_AUTOFMT, NULL );
				pUndo = new SwUndoTblNumFmt( rBox );
				pUndo->SetNumFmt( nFmtIdx, fNumber );
			}

			SwTableBoxFmt* pBoxFmt = (SwTableBoxFmt*)rBox.GetFrmFmt();
			SfxItemSet aBoxSet( GetAttrPool(), RES_BOXATR_FORMAT, RES_BOXATR_VALUE );

			sal_Bool bSetNumFmt = IsInsTblFormatNum(), bLockModify = sal_True;
			if( bSetNumFmt )
			{
				if( !IsInsTblChangeNumFormat() )
				{
					if( !pNumFmtItem )
						bSetNumFmt = sal_False;
					else
					{
						sal_uLong nOldNumFmt = ((SwTblBoxNumFormat*)pNumFmtItem)->
											GetValue();
						SvNumberFormatter* pNumFmtr = GetNumberFormatter();

						short nFmtType = pNumFmtr->GetType( nFmtIdx );
						if( nFmtType == pNumFmtr->GetType( nOldNumFmt ) ||
							NUMBERFORMAT_NUMBER == nFmtType )
							// eingstelltes und vorgegebenes NumFormat
							// stimmen ueberein -> altes Format beibehalten
							nFmtIdx = nOldNumFmt;
						else
							// eingstelltes und vorgegebenes NumFormat
							// stimmen nicht ueberein -> als Text einfuegen
							bLockModify = bSetNumFmt = sal_False;
					}
				}

				if( bSetNumFmt )
				{
					pBoxFmt = (SwTableBoxFmt*)rBox.ClaimFrmFmt();

					aBoxSet.Put( SwTblBoxValue( fNumber ));
					aBoxSet.Put( SwTblBoxNumFormat( nFmtIdx ));
				}
			}

			// JP 28.04.98: Nur Formel zuruecksetzen reicht nicht.
			//				Sorge dafuer, das der Text auch entsprechend
			//				formatiert wird!

			if( !bSetNumFmt && !bIsEmptyTxtNd && pNumFmtItem )
			{
				// JP 15.01.99: Nur Attribute zuruecksetzen reicht nicht.
				//				Sorge dafuer, das der Text auch entsprechend
				//				formatiert wird!
                pBoxFmt->SetFmtAttr( *GetDfltAttr( RES_BOXATR_FORMAT ));
			}

			if( bLockModify ) pBoxFmt->LockModify();
            pBoxFmt->ResetFmtAttr( RES_BOXATR_FORMAT, RES_BOXATR_VALUE );
			if( bLockModify ) pBoxFmt->UnlockModify();

			if( bSetNumFmt )
                pBoxFmt->SetFmtAttr( aBoxSet );
		}
	}
	else
	{
		// es ist keine Zahl
		const SfxPoolItem* pValueItem = 0, *pFmtItem = 0;
		SwTableBoxFmt* pBoxFmt = (SwTableBoxFmt*)rBox.GetFrmFmt();
		if( SFX_ITEM_SET == pBoxFmt->GetItemState( RES_BOXATR_FORMAT,
				sal_False, &pFmtItem ) ||
			SFX_ITEM_SET == pBoxFmt->GetItemState( RES_BOXATR_VALUE,
				sal_False, &pValueItem ))
		{
            if (GetIDocumentUndoRedo().DoesUndo())
            {
                GetIDocumentUndoRedo().StartUndo( UNDO_TABLE_AUTOFMT, NULL );
				pUndo = new SwUndoTblNumFmt( rBox );
			}

			pBoxFmt = (SwTableBoxFmt*)rBox.ClaimFrmFmt();

			// alle Zahlenformate entfernen
			sal_uInt16 nWhich1 = RES_BOXATR_FORMULA;
			if( !bIsEmptyTxtNd )
				//JP 15.01.99: dieser Teil wurde doch schon oben abgeprueft!
				/* && pFmtItem && !GetNumberFormatter()->
				IsTextFormat( ((SwTblBoxNumFormat*)pFmtItem)->GetValue() ) )*/
			{
				nWhich1 = RES_BOXATR_FORMAT;

				// JP 15.01.99: Nur Attribute zuruecksetzen reicht nicht.
				//				Sorge dafuer, das der Text auch entsprechend
				//				formatiert wird!
                pBoxFmt->SetFmtAttr( *GetDfltAttr( nWhich1 ));
			}
            pBoxFmt->ResetFmtAttr( nWhich1, RES_BOXATR_VALUE );
		}
		else
			bChgd = sal_False;
	}

	if( bChgd )
	{
		if( pUndo )
		{
			pUndo->SetBox( rBox );
            GetIDocumentUndoRedo().AppendUndo(pUndo);
            GetIDocumentUndoRedo().EndUndo( UNDO_END, NULL );
        }

		const SwTableNode* pTblNd = rBox.GetSttNd()->FindTableNode();
		if( bCallUpdate )
		{
			SwTableFmlUpdate aTblUpdate( &pTblNd->GetTable() );
			UpdateTblFlds( &aTblUpdate );

			// TL_CHART2: update charts (when cursor leaves cell and
			// automatic update is enabled)
			if (AUTOUPD_FIELD_AND_CHARTS == getFieldUpdateFlags(true))
				pTblNd->GetTable().UpdateCharts();
		}
		SetModified();
	}
}

void SwDoc::SetTblBoxFormulaAttrs( SwTableBox& rBox, const SfxItemSet& rSet )
{
    if (GetIDocumentUndoRedo().DoesUndo())
    {
        GetIDocumentUndoRedo().AppendUndo( new SwUndoTblNumFmt(rBox, &rSet) );
    }

	SwFrmFmt* pBoxFmt = rBox.ClaimFrmFmt();
	if( SFX_ITEM_SET == rSet.GetItemState( RES_BOXATR_FORMULA ))
	{
		pBoxFmt->LockModify();
        pBoxFmt->ResetFmtAttr( RES_BOXATR_VALUE );
		pBoxFmt->UnlockModify();
	}
	else if( SFX_ITEM_SET == rSet.GetItemState( RES_BOXATR_VALUE ))
	{
		pBoxFmt->LockModify();
        pBoxFmt->ResetFmtAttr( RES_BOXATR_FORMULA );
		pBoxFmt->UnlockModify();
	}
    pBoxFmt->SetFmtAttr( rSet );
	SetModified();
}

void SwDoc::ClearBoxNumAttrs( const SwNodeIndex& rNode )
{
	SwStartNode* pSttNd;
    if( 0 != ( pSttNd = rNode.GetNode().
								FindSttNodeByType( SwTableBoxStartNode )) &&
		2 == pSttNd->EndOfSectionIndex() - pSttNd->GetIndex() )
	{
		SwTableBox* pBox = pSttNd->FindTableNode()->GetTable().
							GetTblBox( pSttNd->GetIndex() );

		const SfxPoolItem* pFmtItem = 0;
		const SfxItemSet& rSet = pBox->GetFrmFmt()->GetAttrSet();
		if( SFX_ITEM_SET == rSet.GetItemState( RES_BOXATR_FORMAT, sal_False, &pFmtItem ) ||
			SFX_ITEM_SET == rSet.GetItemState( RES_BOXATR_FORMULA, sal_False ) ||
			SFX_ITEM_SET == rSet.GetItemState( RES_BOXATR_VALUE, sal_False ))
		{
            if (GetIDocumentUndoRedo().DoesUndo())
            {
                GetIDocumentUndoRedo().AppendUndo(new SwUndoTblNumFmt(*pBox));
            }

			SwFrmFmt* pBoxFmt = pBox->ClaimFrmFmt();

			//JP 01.09.97: TextFormate bleiben erhalten!
			sal_uInt16 nWhich1 = RES_BOXATR_FORMAT;
			if( pFmtItem && GetNumberFormatter()->IsTextFormat(
					((SwTblBoxNumFormat*)pFmtItem)->GetValue() ))
				nWhich1 = RES_BOXATR_FORMULA;
			else
				// JP 15.01.99: Nur Attribute zuruecksetzen reicht nicht.
				//				Sorge dafuer, das der Text auch entsprechend
				//				formatiert wird!
                pBoxFmt->SetFmtAttr( *GetDfltAttr( RES_BOXATR_FORMAT ));

            pBoxFmt->ResetFmtAttr( nWhich1, RES_BOXATR_VALUE );
			SetModified();
		}
	}
}

// kopiert eine Tabelle aus dem selben oder einem anderen Doc in sich
// selbst. Dabei wird eine neue Tabelle angelegt oder eine bestehende
// mit dem Inhalt gefuellt; wobei entweder der Inhalt ab einer Box oder
// in eine bestehende TblSelektion gefuellt wird.
// Gerufen wird es von: edglss.cxx/fecopy.cxx

sal_Bool SwDoc::InsCopyOfTbl( SwPosition& rInsPos, const SwSelBoxes& rBoxes,
						const SwTable* pCpyTbl, sal_Bool bCpyName, sal_Bool bCorrPos )
{
	sal_Bool bRet;

	const SwTableNode* pSrcTblNd = pCpyTbl
			? pCpyTbl->GetTableNode()
			: rBoxes[ 0 ]->GetSttNd()->FindTableNode();

    SwTableNode * pInsTblNd = rInsPos.nNode.GetNode().FindTableNode();

    bool const bUndo( GetIDocumentUndoRedo().DoesUndo() );
	if( !pCpyTbl && !pInsTblNd )
	{
		SwUndoCpyTbl* pUndo = 0;
        if (bUndo)
        {
            GetIDocumentUndoRedo().ClearRedo();
			pUndo = new SwUndoCpyTbl;
        }

        {
            ::sw::UndoGuard const undoGuard(GetIDocumentUndoRedo());
            bRet = pSrcTblNd->GetTable().MakeCopy( this, rInsPos, rBoxes,
												sal_True, bCpyName );
        }

		if( pUndo )
		{
			if( !bRet )
            {
				delete pUndo;
                pUndo = 0;
            }
			else
			{
				pInsTblNd = GetNodes()[ rInsPos.nNode.GetIndex() - 1 ]->FindTableNode();

				pUndo->SetTableSttIdx( pInsTblNd->GetIndex() );
                GetIDocumentUndoRedo().AppendUndo( pUndo );
            }
		}
	}
	else
	{
        RedlineMode_t eOld = GetRedlineMode();
        if( IsRedlineOn() )
	  SetRedlineMode( (RedlineMode_t)(nsRedlineMode_t::REDLINE_ON |
								  nsRedlineMode_t::REDLINE_SHOW_INSERT |
								  nsRedlineMode_t::REDLINE_SHOW_DELETE));

		SwUndoTblCpyTbl* pUndo = 0;
        if (bUndo)
        {
            GetIDocumentUndoRedo().ClearRedo();
			pUndo = new SwUndoTblCpyTbl;
            GetIDocumentUndoRedo().DoUndo(false);
        }

		SwDoc* pCpyDoc = (SwDoc*)pSrcTblNd->GetDoc();
		sal_Bool bDelCpyDoc = pCpyDoc == this;

		if( bDelCpyDoc )
		{
			// kopiere die Tabelle erstmal in ein temp. Doc
			pCpyDoc = new SwDoc;
            pCpyDoc->acquire();

			SwPosition aPos( SwNodeIndex( pCpyDoc->GetNodes().GetEndOfContent() ));
			if( !pSrcTblNd->GetTable().MakeCopy( pCpyDoc, aPos, rBoxes, sal_True, sal_True ))
			{
                if( pCpyDoc->release() == 0 )
                    delete pCpyDoc;

				if( pUndo )
                {
                    GetIDocumentUndoRedo().DoUndo(bUndo);
					delete pUndo;
                    pUndo = 0;
				}
				return sal_False;
			}
			aPos.nNode -= 1;		// auf den EndNode der Tabelle
			pSrcTblNd = aPos.nNode.GetNode().FindTableNode();
		}

		const SwStartNode* pSttNd = rInsPos.nNode.GetNode().FindTableBoxStartNode();

		rInsPos.nContent.Assign( 0, 0 );

		// no complex into complex, but copy into or from new model is welcome
		if( ( !pSrcTblNd->GetTable().IsTblComplex() || pInsTblNd->GetTable().IsNewModel() )
            && ( bDelCpyDoc || rBoxes.Count() ) )
		{
			// dann die Tabelle "relativ" kopieren
			const SwSelBoxes* pBoxes;
			SwSelBoxes aBoxes;

			if( bDelCpyDoc )
			{
				SwTableBox* pBox = pInsTblNd->GetTable().GetTblBox(
										pSttNd->GetIndex() );
				ASSERT( pBox, "Box steht nicht in dieser Tabelle" );
				aBoxes.Insert( pBox );
				pBoxes = &aBoxes;
			}
			else
				pBoxes = &rBoxes;

			// kopiere die Tabelle in die selktierten Zellen.
			bRet = pInsTblNd->GetTable().InsTable( pSrcTblNd->GetTable(),
														*pBoxes, pUndo );
		}
		else
		{
			SwNodeIndex aNdIdx( *pSttNd, 1 );
			bRet = pInsTblNd->GetTable().InsTable( pSrcTblNd->GetTable(),
													aNdIdx, pUndo );
		}

		if( bDelCpyDoc )
        {
            if( pCpyDoc->release() == 0 )
                delete pCpyDoc;
        }

		if( pUndo )
		{
			// falls die Tabelle nicht kopiert werden konnte, das Undo-Object
			// wieder loeschen
            GetIDocumentUndoRedo().DoUndo(bUndo);
			if( !bRet && pUndo->IsEmpty() )
				delete pUndo;
            else
            {
                GetIDocumentUndoRedo().AppendUndo(pUndo);
            }
        }

		if( bCorrPos )
		{
			rInsPos.nNode = *pSttNd;
			rInsPos.nContent.Assign( GetNodes().GoNext( &rInsPos.nNode ), 0 );
		}
        SetRedlineMode( eOld );
	}

	if( bRet )
	{
		SetModified();
		SetFieldsDirty( true, NULL, 0 );
	}
	return bRet;
}



sal_Bool SwDoc::_UnProtectTblCells( SwTable& rTbl )
{
	sal_Bool bChgd = sal_False;
    SwUndoAttrTbl *const pUndo = (GetIDocumentUndoRedo().DoesUndo())
        ?   new SwUndoAttrTbl( *rTbl.GetTableNode() )
        :   0;

	SwTableSortBoxes& rSrtBox = rTbl.GetTabSortBoxes();
	for( sal_uInt16 i = rSrtBox.Count(); i; )
	{
		SwFrmFmt *pBoxFmt = rSrtBox[ --i ]->GetFrmFmt();
		if( pBoxFmt->GetProtect().IsCntntProtected() )
		{
            pBoxFmt->ResetFmtAttr( RES_PROTECT );
			bChgd = sal_True;
		}
	}

	if( pUndo )
	{
		if( bChgd )
        {
            GetIDocumentUndoRedo().AppendUndo( pUndo );
        }
        else
			delete pUndo;
	}
	return bChgd;
}


sal_Bool SwDoc::UnProtectCells( const String& rName )
{
	sal_Bool bChgd = sal_False;
	SwTableFmt* pFmt = FindTblFmtByName( rName );
	if( pFmt )
	{
		bChgd = _UnProtectTblCells( *SwTable::FindTable( pFmt ) );
		if( bChgd )
			SetModified();
	}

	return bChgd;
}

sal_Bool SwDoc::UnProtectCells( const SwSelBoxes& rBoxes )
{
	sal_Bool bChgd = sal_False;
	if( rBoxes.Count() )
    {
        SwUndoAttrTbl *const pUndo = (GetIDocumentUndoRedo().DoesUndo())
				? new SwUndoAttrTbl( *rBoxes[0]->GetSttNd()->FindTableNode() )
				: 0;

		SvPtrarr aFmts( 16 ), aNewFmts( 16 );
		for( sal_uInt16 i = rBoxes.Count(); i; )
		{
			SwTableBox* pBox = rBoxes[ --i ];
			SwFrmFmt* pBoxFmt = pBox->GetFrmFmt();
			if( pBoxFmt->GetProtect().IsCntntProtected() )
			{
				sal_uInt16 nFnd = aFmts.GetPos( pBoxFmt );
				if( USHRT_MAX != nFnd )
					pBox->ChgFrmFmt( (SwTableBoxFmt*)aNewFmts[ nFnd ] );
				else
				{
					aFmts.Insert( pBoxFmt, aFmts.Count() );
					pBoxFmt = pBox->ClaimFrmFmt();
                    pBoxFmt->ResetFmtAttr( RES_PROTECT );
					aNewFmts.Insert( pBoxFmt, aNewFmts.Count() );
				}
				bChgd = sal_True;
			}
		}

		if( pUndo )
		{
			if( bChgd )
            {
                GetIDocumentUndoRedo().AppendUndo( pUndo );
            }
            else
				delete pUndo;
		}
	}
	return bChgd;
}

sal_Bool SwDoc::UnProtectTbls( const SwPaM& rPam )
{
    GetIDocumentUndoRedo().StartUndo(UNDO_EMPTY, NULL);

	sal_Bool bChgd = sal_False, bHasSel = rPam.HasMark() ||
									rPam.GetNext() != (SwPaM*)&rPam;
	SwFrmFmts& rFmts = *GetTblFrmFmts();
	SwTable* pTbl;
	const SwTableNode* pTblNd;
	for( sal_uInt16 n = rFmts.Count(); n ; )
		if( 0 != (pTbl = SwTable::FindTable( rFmts[ --n ] )) &&
			0 != (pTblNd = pTbl->GetTableNode() ) &&
			pTblNd->GetNodes().IsDocNodes() )
		{
			sal_uLong nTblIdx = pTblNd->GetIndex();

			// dann ueberpruefe ob Tabelle in der Selection liegt
			if( bHasSel )
			{
				int bFound = sal_False;
				SwPaM* pTmp = (SwPaM*)&rPam;
				do {
					const SwPosition *pStt = pTmp->Start(),
									*pEnd = pTmp->End();
					bFound = pStt->nNode.GetIndex() < nTblIdx &&
							nTblIdx < pEnd->nNode.GetIndex();

				} while( !bFound && &rPam != ( pTmp = (SwPaM*)pTmp->GetNext() ) );
				if( !bFound )
					continue;		// weitersuchen
			}

			// dann mal den Schutz aufheben
			bChgd |= _UnProtectTblCells( *pTbl );
		}

    GetIDocumentUndoRedo().EndUndo(UNDO_EMPTY, NULL);
	if( bChgd )
		SetModified();

	return bChgd;
}

sal_Bool SwDoc::HasTblAnyProtection( const SwPosition* pPos,
								 const String* pTblName,
								 sal_Bool* pFullTblProtection )
{
	sal_Bool bHasProtection = sal_False;
	SwTable* pTbl = 0;
	if( pTblName )
		pTbl = SwTable::FindTable( FindTblFmtByName( *pTblName ) );
	else if( pPos )
	{
		SwTableNode* pTblNd = pPos->nNode.GetNode().FindTableNode();
		if( pTblNd )
			pTbl = &pTblNd->GetTable();
	}

	if( pTbl )
	{
		SwTableSortBoxes& rSrtBox = pTbl->GetTabSortBoxes();
		for( sal_uInt16 i = rSrtBox.Count(); i; )
		{
			SwFrmFmt *pBoxFmt = rSrtBox[ --i ]->GetFrmFmt();
			if( pBoxFmt->GetProtect().IsCntntProtected() )
			{
				if( !bHasProtection )
				{
					bHasProtection = sal_True;
					if( !pFullTblProtection )
						break;
					*pFullTblProtection = sal_True;
				}
			}
			else if( bHasProtection && pFullTblProtection )
			{
				*pFullTblProtection = sal_False;
				break;
			}
		}
	}
	return bHasProtection;
}

#ifdef DEL_TABLE_REDLINES
lcl_DelRedlines::lcl_DelRedlines( const SwTableNode& rNd,
									sal_Bool bCheckForOwnRedline )
	: pDoc( (SwDoc*)rNd.GetNodes().GetDoc() )
{
    pDoc->StartUndo(UNDO_EMPTY, NULL);
	const SwRedlineTbl& rTbl = pDoc->GetRedlineTbl();
	if( !pDoc->IsIgnoreRedline() && rTbl.Count() )
	{
		sal_Bool bDelete = sal_True;
		if( bCheckForOwnRedline )
		{
			sal_uInt16 nRedlPos = pDoc->GetRedlinePos( rNd, USHRT_MAX );
			sal_uInt32 nSttNd = rNd.GetIndex(),
					   nEndNd = rNd.EndOfSectionIndex();

			for ( ; nRedlPos < rTbl.Count(); ++nRedlPos )
			{
				const SwRedline* pRedline = rTbl[ nRedlPos ];
				const SwPosition* pStt = pRedline->Start(),
						  		* pEnd = pStt == pRedline->GetPoint()
						  							? pRedline->GetMark()
													: pRedline->GetPoint();
				if( pStt->nNode <= nSttNd )
				{
					if( pEnd->nNode >= nEndNd &&
						pRedline->GetAuthor() == pDoc->GetRedlineAuthor() )
					{
						bDelete = sal_False;
						break;
					}
				}
				else
					break;
			}
		}
		if( bDelete )
		{
			SwPaM aPam(*rNd.EndOfSectionNode(), rNd);
			pDoc->AcceptRedline( aPam, true );
		}
	}
}
#endif