/**************************************************************
 * 
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 * 
 *   http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 * 
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#include <unotools/configmgr.hxx>
#include <prtopt.hxx>
#include <tools/debug.hxx>
#include <com/sun/star/uno/Any.hxx>
#include <com/sun/star/uno/Sequence.hxx>

#include <unomid.h>


using namespace utl;
using rtl::OUString;
using namespace com::sun::star::uno;

/*--------------------------------------------------------------------
	 Beschreibung: Ctor
 --------------------------------------------------------------------*/

Sequence<OUString> SwPrintOptions::GetPropertyNames()
{
	static const char* aPropNames[] =
	{
		"Content/Graphic",				//  0
		"Content/Table",            	//  1
		"Content/Control",          	//  2
		"Content/Background",       	//  3
		"Content/PrintBlack",       	//  4
		"Content/Note",             	//  5
        "Page/Reversed",                //  6
        "Page/Brochure",                //  7
        "Page/BrochureRightToLeft",     //  8 
        "Output/SinglePrintJob",        //  9
        "Output/Fax",                   // 10
        "Papertray/FromPrinterSetup",   // 11
        "Content/Drawing",              // 12 not in SW/Web
        "Page/LeftPage",                // 13 not in SW/Web
        "Page/RightPage",               // 14 not in SW/Web
        "EmptyPages",                   // 15 not in SW/Web
        "Content/PrintPlaceholders",    // 16 not in Sw/Web
        "Content/PrintHiddenText"       // 17 not in Sw/Web
	};
    const int nCount = bIsWeb ? 12 : 18;
	Sequence<OUString> aNames(nCount);
	OUString* pNames = aNames.getArray();
	for(int i = 0; i < nCount; i++)
	{
		pNames[i] = OUString::createFromAscii(aPropNames[i]);
	}
	return aNames;
}
/* -----------------------------06.09.00 16:44--------------------------------

 ---------------------------------------------------------------------------*/
SwPrintOptions::SwPrintOptions(sal_Bool bWeb) :
    ConfigItem(bWeb ? C2U("Office.WriterWeb/Print") :  C2U("Office.Writer/Print"),
        CONFIG_MODE_DELAYED_UPDATE|CONFIG_MODE_RELEASE_TREE),
	bIsWeb(bWeb)
{
    bPrintPageBackground = !bWeb;
    bPrintBlackFont = bWeb;
    bPrintTextPlaceholder = bPrintHiddenText = sal_False;
    if (bWeb)
        bPrintEmptyPages = sal_False;

    Sequence<OUString> aNames = GetPropertyNames();
	Sequence<Any> aValues = GetProperties(aNames);
	const Any* pValues = aValues.getConstArray();
	DBG_ASSERT(aValues.getLength() == aNames.getLength(), "GetProperties failed");
	if(aValues.getLength() == aNames.getLength())
	{
		for(int nProp = 0; nProp < aNames.getLength(); nProp++)
		{
			if(pValues[nProp].hasValue())
			{
				switch(nProp)
				{
					case  0: bPrintGraphic 		= *(sal_Bool*)pValues[nProp].getValue(); break;
					case  1: bPrintTable		 	= *(sal_Bool*)pValues[nProp].getValue();  break;
					case  2: bPrintControl	  	= *(sal_Bool*)pValues[nProp].getValue()	;  break;
					case  3: bPrintPageBackground= *(sal_Bool*)pValues[nProp].getValue();  break;
					case  4: bPrintBlackFont	    = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  5:
                    {
                        sal_Int32 nTmp = 0;
                        pValues[nProp] >>=  nTmp;
                        nPrintPostIts = (sal_Int16)nTmp;
                    }
                    break;
                    case  6: bPrintReverse      = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  7: bPrintProspect      = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  8: bPrintProspectRTL  = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case  9: bPrintSingleJobs   = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 10: pValues[nProp] >>= sFaxName;  break;
                    case 11: bPaperFromSetup    = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 12: bPrintDraw         = *(sal_Bool*)pValues[nProp].getValue() ;  break;
                    case 13: bPrintLeftPages    = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 14: bPrintRightPages       = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 15: bPrintEmptyPages       = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 16: bPrintTextPlaceholder = *(sal_Bool*)pValues[nProp].getValue();  break;
                    case 17: bPrintHiddenText = *(sal_Bool*)pValues[nProp].getValue();  break;
                }
			}
		}
	}

    // currently there is just one checkbox for print drawings and print graphics
    // In the UI. (File/Print dialog and Tools/Options/.../Print)
    // And since print graphics is the only available in Writer and WrtierWeb ...

    bPrintDraw = bPrintGraphic;
}
/* -----------------------------06.09.00 16:50--------------------------------

 ---------------------------------------------------------------------------*/
SwPrintOptions::~SwPrintOptions()
{
}
/* -----------------------------06.09.00 16:43--------------------------------

 ---------------------------------------------------------------------------*/

void SwPrintOptions::Notify( const ::com::sun::star::uno::Sequence< rtl::OUString >& ) {}

void	SwPrintOptions::Commit()
{
	Sequence<OUString> aNames = GetPropertyNames();

	Sequence<Any> aValues(aNames.getLength());
	Any* pValues = aValues.getArray();

	const Type& rType = ::getBooleanCppuType();
	sal_Bool bVal;
	for(int nProp = 0; nProp < aNames.getLength(); nProp++)
	{
		switch(nProp)
		{
			case  0: bVal = bPrintGraphic; pValues[nProp].setValue(&bVal, rType);break;
			case  1: bVal = bPrintTable		    ;pValues[nProp].setValue(&bVal, rType);  break;
			case  2: bVal = bPrintControl		 ; pValues[nProp].setValue(&bVal, rType);  break;
			case  3: bVal = bPrintPageBackground; pValues[nProp].setValue(&bVal, rType);  break;
			case  4: bVal = bPrintBlackFont	    ; pValues[nProp].setValue(&bVal, rType);  break;
            case  5: pValues[nProp] <<=  (sal_Int32)nPrintPostIts       ; break;
            case  6: bVal = bPrintReverse       ; pValues[nProp].setValue(&bVal, rType);  break;
            case  7: bVal = bPrintProspect      ; pValues[nProp].setValue(&bVal, rType);  break;
            case  8: bVal = bPrintProspectRTL      ; pValues[nProp].setValue(&bVal, rType);  break;
            case  9: bVal = bPrintSingleJobs     ; pValues[nProp].setValue(&bVal, rType);  break;
            case 10: pValues[nProp] <<= sFaxName;  break;
            case 11: bVal = bPaperFromSetup     ; pValues[nProp].setValue(&bVal, rType);  break;
            case 12: bVal = bPrintDraw           ; pValues[nProp].setValue(&bVal, rType);  break;
            case 13: bVal = bPrintLeftPages      ; pValues[nProp].setValue(&bVal, rType);  break;
            case 14: bVal = bPrintRightPages    ; pValues[nProp].setValue(&bVal, rType);  break;
            case 15: bVal = bPrintEmptyPages    ; pValues[nProp].setValue(&bVal, rType);  break;
            case 16: bVal = bPrintTextPlaceholder; pValues[nProp].setValue(&bVal, rType);  break;
            case 17: bVal = bPrintHiddenText; pValues[nProp].setValue(&bVal, rType);  break;
        }
	}

    // currently there is just one checkbox for print drawings and print graphics
    // In the UI. (File/Print dialog and Tools/Options/.../Print)
    // And since print graphics is the only available in Writer and WrtierWeb ...
    bPrintDraw = bPrintGraphic;

    PutProperties(aNames, aValues);
}