/************************************************************** * * Licensed to the Apache Software Foundation (ASF) under one * or more contributor license agreements. See the NOTICE file * distributed with this work for additional information * regarding copyright ownership. The ASF licenses this file * to you under the Apache License, Version 2.0 (the * "License"); you may not use this file except in compliance * with the License. You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, * software distributed under the License is distributed on an * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY * KIND, either express or implied. See the License for the * specific language governing permissions and limitations * under the License. * *************************************************************/ /************************************************************************* * * ATTENTION * This file is intended to work inside and outside the StarOffice environment. * Only adaption of file commtypes.hxx should be necessary. Else it is a bug! * ************************************************************************/ #ifndef _RCONTROL_HXX #define _RCONTROL_HXX #define UID_ACTIVE "UID_ACTIVE" #define SI_IPCCommandBlock 1 #define SI_SocketCommandBlock SI_IPCCommandBlock // Zumindest erstmal #define SI_DirectCommandBlock 2 #define SIControl 3 // remove after numeric HelpIDs are completely removed and no legacy testtool is used anymore #define SISlot 4 #define SIFlow 5 #define SICommand 6 #define SIUnoSlot 7 #define SIStringControl 8 #define SIReturnBlock 11 #define SIReturn 12 #define SIReturnError 13 // Typisierung im Stream #define BinUSHORT 11 #define BinULONG 14 #define BinString 12 #define BinBool 13 #define BinSbxValue 15 // Classes // !!!Diese Defines duerfen niemals geaendert werden!!! #define C_NoType -1 // Maximale 32 einfache Controls #define C_TabControl 0 #define C_RadioButton 1 #define C_CheckBox 2 #define C_TriStateBox 3 #define C_Edit 4 #define C_MultiLineEdit 5 #define C_MultiListBox 6 #define C_ListBox 7 #define C_ComboBox 8 #define C_PushButton 9 #define C_SpinField 10 #define C_PatternField 11 #define C_NumericField 12 #define C_MetricField 13 #define C_CurrencyField 14 #define C_DateField 15 #define C_TimeField 16 #define C_ImageRadioButton 17 #define C_NumericBox 18 #define C_MetricBox 19 #define C_CurrencyBox 20 #define C_DateBox 21 #define C_TimeBox 22 #define C_ImageButton 23 #define C_MenuButton 24 #define C_MoreButton 25 // Maximale 7 Container #define C_TabPage 32 #define C_ModalDlg 33 #define C_FloatWin 34 #define C_ModelessDlg 35 #define C_WorkWin 36 #define C_DockingWin 37 // Diese Defines koennen geaendert werden #define C_MessBox 40 #define C_InfoBox 41 #define C_WarningBox 42 #define C_ErrorBox 43 #define C_QueryBox 44 #define C_TabDlg 45 #define C_SingleTabDlg 46 #define C_Window 47 #define C_PatternBox 60 #define C_ToolBox 61 #define C_ValueSet 62 #define C_Control 63 #define C_TreeListBox 64 // Hurray the TreeListBox finally got its own Window Type #define C_OkButton 65 #define C_CancelButton 66 #define C_ButtonDialog 67 #define C_Dialog 68 #define M_WITH_RETURN 0x0200 // Die Variable wird zum Aufnehmen des Wertes gespeichert #define M_KEY_STRING 0x0400 // Key Befehle werden umgewandelt i.e. "" #define M_SOFFICE 0x0800 // Command valid for Star/Open Office #define M_MOZILLA 0x1000 // Command valid for Mozilla // for MacroRecorder #define M_RET_NUM_CONTROL 0x2000 // decode ULong as Control (For Tabpages, Toolboxes, ... ) // Methoden #define M_Select 21 #define M_SetNoSelection 22 #define M_SetText 23 #define M_More 24 #define M_Less 25 #define M_ToMin 26 #define M_ToMax 27 #define M_Check 28 #define M_UnCheck 29 #define M_TriState 30 #define M_SetPage 31 #define M_Click 32 #define M_Close 33 // Push Buttons on Dialog (Auch More Button) #define M_Cancel 34 #define M_OK 35 #define M_Help 36 #define M_Default 37 // Push defaultbutton on Dialog #define M_Yes 38 #define M_No 39 #define M_Repeat 40 #define M_Open 41 #define M_Pick 42 #define M_Move 43 #define M_Size 44 #define M_Minimize 45 #define M_Maximize 46 #define M_Dock 47 #define M_Undock 48 #define M_TypeKeys ( M_KEY_STRING | 50 ) #define M_MouseDown 51 #define M_MouseUp 52 #define M_MouseMove 53 #define M_MouseDoubleClick 54 #define M_SnapShot 55 #define M_SetNextToolBox 56 #define M_OpenContextMenu 57 #define M_MultiSelect 58 // Filedialog #define M_SetPath 60 #define M_SetCurFilter 61 // Printdialog #define M_SetPrinter 70 #define M_CheckRange 71 #define M_SetRangeText 72 #define M_SetFirstPage 73 #define M_SetLastPage 74 #define M_CheckCollate 75 #define M_SetPageId 76 #define M_SetPageNr 77 #define M_AnimateMouse 78 #define M_TearOff 79 #define M_FadeIn 80 #define M_FadeOut 81 #define M_Pin 82 #define M_UseMenu 83 // Use the menu of the next possible parent of given Window #define M_OpenMenu 84 // MenuButtons and Menus in ToolBoxes #define M_Restore 85 // Window Control together with M_Maximize and M_Minimize #define M_DisplayPercent 200 // Zum Anzeigen der Prozente des Windows #define M_LAST_NO_RETURN 200 #if ( M_LAST_NO_RETURN >= M_WITH_RETURN ) #error "Bereich überschritten" #endif #define M_Exists ( M_WITH_RETURN | 1 ) #define M_NotExists ( M_WITH_RETURN | 2 ) #define M_IsEnabled ( M_WITH_RETURN | 3 ) #define M_IsVisible ( M_WITH_RETURN | 4 ) #define M_IsWritable ( M_WITH_RETURN | 5 ) #define M_GetPage ( M_WITH_RETURN | 6 ) #define M_IsChecked ( M_WITH_RETURN | 7 ) #define M_IsTristate ( M_WITH_RETURN | 8 ) #define M_GetState ( M_WITH_RETURN | 9 ) #define M_GetText ( M_WITH_RETURN | 10 ) #define M_GetSelCount ( M_WITH_RETURN | 11 ) #define M_GetSelIndex ( M_WITH_RETURN | 12 ) #define M_GetSelText ( M_WITH_RETURN | 13 ) #define M_GetItemCount ( M_WITH_RETURN | 14 ) #define M_GetItemText ( M_WITH_RETURN | 15 ) #define M_IsOpen ( M_WITH_RETURN | 16 ) #define M_Caption ( M_WITH_RETURN | 17 ) #define M_IsMax ( M_WITH_RETURN | 18 ) #define M_IsDocked ( M_WITH_RETURN | 19 ) #define M_GetRT ( M_WITH_RETURN | 20 ) #define M_GetPageId ( M_WITH_RETURN | 21 ) #define M_GetPageCount ( M_WITH_RETURN | 22 ) #define M_GetPosX ( M_WITH_RETURN | 23 ) #define M_GetPosY ( M_WITH_RETURN | 24 ) #define M_GetSizeX ( M_WITH_RETURN | 25 ) #define M_GetSizeY ( M_WITH_RETURN | 26 ) #define M_GetNextToolBox ( M_WITH_RETURN | 27 ) #define M_GetButtonCount ( M_WITH_RETURN | 28 ) #define M_GetButtonId ( M_WITH_RETURN | 29 ) #define M_IsFadeIn ( M_WITH_RETURN | 30 ) #define M_IsPin ( M_WITH_RETURN | 31 ) // Statusbar #define M_StatusGetText ( M_WITH_RETURN | 32 ) #define M_StatusIsProgress ( M_WITH_RETURN | 33 ) #define M_StatusGetItemCount ( M_WITH_RETURN | 34 ) #define M_StatusGetItemId ( M_WITH_RETURN | 35 ) // #define M_GetMouseStyle ( M_WITH_RETURN | 36 ) // support for Messagebox with checkbox #define M_GetCheckBoxText ( M_WITH_RETURN | 37 ) // Scrollbars #define M_HasScrollBar ( M_WITH_RETURN | 38 ) #define M_IsScrollBarEnabled ( M_WITH_RETURN | 39 ) // Dieser befehl wird nur intern im Controller (sts library) verwendet. Sie tauchen nicht im Testtool auf! #define _M_IsEnabled ( M_WITH_RETURN | 50 ) #define M_GetFixedTextCount ( M_WITH_RETURN | 51 ) #define M_GetFixedText ( M_WITH_RETURN | 52 ) #define M_IsMin ( M_WITH_RETURN | 53 ) #define M_IsRestore ( M_WITH_RETURN | 54 ) #define M_GetItemType ( M_WITH_RETURN | 55 ) // Commands for (Edit)BrowseBox #define M_GetColumnCount ( M_WITH_RETURN | 56 ) #define M_GetRowCount ( M_WITH_RETURN | 57 ) #define M_IsEditing ( M_WITH_RETURN | 58 ) #define M_IsItemEnabled ( M_WITH_RETURN | 59 ) // TreeListBox #define M_Collapse ( M_WITH_RETURN | 60 ) #define M_Expand ( M_WITH_RETURN | 61 ) //#define M_SOFFICE 0x0800 // Command valid for Star/Open Office //#define M_MOZILLA 0x1000 // Command valid for Mozilla // Enhencement #define M_GetHelpText ( M_WITH_RETURN | 90 ) #define M_GetQuickHelpText ( M_WITH_RETURN | 91 ) #define M_GetScreenRectangle ( M_WITH_RETURN | 92 ) #define M_HasFocus ( M_WITH_RETURN | 93 ) #define M_GetItemHelpText ( M_WITH_RETURN | 94 ) #define M_GetItemQuickHelpText ( M_WITH_RETURN | 95 ) #define M_GetItemText2 ( M_WITH_RETURN | 96 ) // RemoteCommands #define RC_AppAbort ( M_SOFFICE | M_MOZILLA | 1 ) #define RC_SetClipboard ( M_SOFFICE | M_MOZILLA | 2 ) #define RC_NoDebug ( M_SOFFICE | M_MOZILLA | 3 ) #define RC_Debug ( M_SOFFICE | M_MOZILLA | 4 ) #define RC_GPF ( M_SOFFICE | M_MOZILLA | 5 ) #define RC_DisplayHid ( M_SOFFICE | M_MOZILLA | 6 ) #define RC_AppDelay ( M_SOFFICE | M_MOZILLA | 7 ) #define RC_UseBindings ( M_SOFFICE | 8 ) #define RC_Profile ( M_SOFFICE | M_MOZILLA | 9 ) // (Popup)Menu #define RC_MenuSelect ( M_SOFFICE | M_MOZILLA | 10 ) #define RC_SetControlType ( M_SOFFICE | 11 ) // deprecated since RTTI // RemoteFileAccess #define RC_Kill ( M_SOFFICE | 12 ) #define RC_RmDir ( M_SOFFICE | 13 ) #define RC_MkDir ( M_SOFFICE | 14 ) #define RC_FileCopy ( M_SOFFICE | 15 ) #define RC_Name ( M_SOFFICE | 16 ) #define RC_CaptureAssertions (M_SOFFICE | M_MOZILLA | 17 ) #define RC_Assert ( M_SOFFICE | M_MOZILLA | 18 ) #define RC_MenuOpen ( M_SOFFICE | M_MOZILLA | 19 ) #define RC_TypeKeysDelay ( M_SOFFICE | M_MOZILLA | 20 ) #define RC_ShowBar ( M_MOZILLA | 21 ) #define RC_LoadURL ( M_MOZILLA | 22 ) #define RC_CloseSysDialog ( M_SOFFICE | 23 ) #define RC_SAXRelease ( M_SOFFICE | 24 ) #define RC_RecordMacro ( M_SOFFICE | 25 ) #define RC_ActivateDocument ( M_SOFFICE | 26 ) #define RC_CatchGPF ( M_SOFFICE | 27 ) #define _RC_LAST_NO_RETURN 27 #if ( _RC_LAST_NO_RETURN >= M_WITH_RETURN ) #error "Bereich überschritten" #endif // Befehle mit Returnwert #define RC_GetClipboard ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 1 ) #define RC_WinTree ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 2 ) #define RC_ResetApplication ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 3 ) #define RC_GetNextCloseWindow ( M_SOFFICE | M_WITH_RETURN | 4 ) #define RC_ApplicationBusy ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 5 ) // (Popup)Menu #define RC_MenuGetItemCount ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 6 ) #define RC_MenuGetItemId ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 7 ) #define RC_MenuGetItemPos ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 8 ) #define RC_MenuIsSeperator ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 9 ) #define RC_MenuIsItemChecked ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 10 ) #define RC_MenuIsItemEnabled ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 11 ) #define RC_MenuGetItemText ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 12 ) // RemoteFileAccess #define RC_Dir ( M_SOFFICE | M_WITH_RETURN | 18 ) #define RC_FileLen ( M_SOFFICE | M_WITH_RETURN | 19 ) #define RC_FileDateTime ( M_SOFFICE | M_WITH_RETURN | 20 ) #define RC_Translate ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 21 ) #define RC_GetMouseStyle ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 22 ) #define RC_UnpackStorage ( M_SOFFICE | M_WITH_RETURN | 23 ) #define RC_IsBarVisible ( M_MOZILLA | M_WITH_RETURN | 24 ) #define RC_MenuGetItemCommand ( M_SOFFICE | M_MOZILLA | M_WITH_RETURN | 25 ) #define RC_ExistsSysDialog ( M_SOFFICE | M_WITH_RETURN | 26 ) #define RC_SAXCheckWellformed ( M_SOFFICE | M_WITH_RETURN | 27 ) #define RC_SAXReadFile ( M_SOFFICE | M_WITH_RETURN | 28 ) #define RC_SAXGetNodeType ( M_SOFFICE | M_WITH_RETURN | 29 ) #define RC_SAXGetElementName ( M_SOFFICE | M_WITH_RETURN | 30 ) #define RC_SAXGetChars ( M_SOFFICE | M_WITH_RETURN | 31 ) #define RC_SAXGetChildCount ( M_SOFFICE | M_WITH_RETURN | 32 ) #define RC_SAXGetAttributeCount ( M_SOFFICE | M_WITH_RETURN | 33 ) #define RC_SAXGetAttributeName ( M_SOFFICE | M_WITH_RETURN | 34 ) #define RC_SAXGetAttributeValue ( M_SOFFICE | M_WITH_RETURN | 35 ) #define RC_SAXSeekElement ( M_SOFFICE | M_WITH_RETURN | 36 ) #define RC_SAXHasElement ( M_SOFFICE | M_WITH_RETURN | 37 ) #define RC_SAXGetElementPath ( M_SOFFICE | M_WITH_RETURN | 38 ) #define RC_GetDocumentCount ( M_SOFFICE | M_WITH_RETURN | 39 ) #define RC_GetSystemLanguage ( M_SOFFICE | M_WITH_RETURN | 40 ) #define RC_IsProduct ( M_SOFFICE | M_WITH_RETURN | 41 ) #define RC_MenuHasSubMenu ( M_SOFFICE | M_WITH_RETURN | 42 ) #define RC_UsePostEvents ( M_SOFFICE | M_WITH_RETURN | 43 ) #define RC_WaitSlot ( M_SOFFICE | M_WITH_RETURN | 44 ) // Flow Control #define F_EndCommandBlock 101 // Initiiert Rückmeldung des Status #define F_Sequence 102 // Übergibt Sequence Nummer (1. in jedem Stream) // Return codes #define RET_Sequence 132 // Übergibt Sequence Nummer (1. in jedem Stream) #define RET_Value 133 // Übergibt Return-wert #define RET_WinInfo 134 // Information über aktuelles Fenster/Control #define RET_ProfileInfo 135 // Profile Information #define RET_DirectLoging 136 // Direktes Übertragen von Informationen in das Log #define RET_MacroRecorder 137 // MakroRecorder Befehl übertragen // Subcodes die in nUId geliefert werden // für F_ProfileInfo #define S_ProfileReset 201 // nNr1 = Anzahl Borders // Achtung!! Diese Defines müssen aufeinanderfolgende Nummern haben!! #define S_ProfileBorder1 202 // nNr1 = Border1 in ms #define S_ProfileBorder2 203 // nNr1 = Border2 in ms #define S_ProfileBorder3 204 // nNr1 = Border3 in ms #define S_ProfileBorder4 205 // nNr1 = Border4 in ms // Achtung Ende #define S_ProfileTime 210 // nNr1 = remote Zeit des Befehls #define S_ProfileDump 211 // Gibt die daten aus. // für F_DirectLoging #define S_AssertError 220 #define S_AssertWarning 221 #define S_AssertTrace 222 #define S_QAError 223 // Constants which are available in VCLTestTool scripts // Different types of controls recognized via RTTI #define CONST_CTBrowseBox 100 #define CONST_CTValueSet 103 #define CONST_CTORoadmap 104 #define CONST_CTIExtensionListBox 105 #define CONST_CTTableControl 106 #define CONST_CTUnknown 199 // Konstanten für das ALignment des gesuchten Splitters #define CONST_ALIGN_LEFT 120 #define CONST_ALIGN_TOP 121 #define CONST_ALIGN_RIGHT 122 #define CONST_ALIGN_BOTTOM 123 /// What dialog to use in RC_CloseSysDialog or RC_ExistsSysDialog #define CONST_FilePicker 301 #define CONST_FolderPicker 302 /// NodeTypes of the SAX Parser #define CONST_NodeTypeCharacter 555 #define CONST_NodeTypeElement 556 #define CONST_NodeTypeComment 557 /// ItemTypes for TreeListBox and maybe others #define CONST_ItemTypeText 602 #define CONST_ItemTypeBMP 601 #define CONST_ItemTypeCheckbox 600 #define CONST_ItemTypeContextBMP 603 #define CONST_ItemTypeUnknown 604 /// Return values for WaitSlot #define CONST_WSTimeout 701 #define CONST_WSAborted 702 #define CONST_WSFinished 703 // Beschreibt die Parametertypen als Bitfeld Reihenfolge immer! // wie hier Aufgelistet #define PARAM_NONE 0x0000 #define PARAM_USHORT_1 0x0001 #define PARAM_USHORT_2 0x0002 #define PARAM_USHORT_3 0x0100 // Nicht in der Reihe!! #define PARAM_USHORT_4 0x0200 // Nicht in der Reihe!! #define PARAM_ULONG_1 0x0004 #define PARAM_ULONG_2 0x0008 #define PARAM_STR_1 0x0010 #define PARAM_STR_2 0x0020 #define PARAM_BOOL_1 0x0040 #define PARAM_BOOL_2 0x0080 #define PARAM_SBXVALUE_1 0x0400 // hier mit 0x0400 Weiter!!! Siehe Oben! // Zusätzliche Beschreibung!! wird auch mit dem Rest verodert //#define PARAM_STR_RAW 0x8000 // Der Zeichensatz der Strings wird nicht konvertiert(für Fareastern) #define ERR_SEND_TIMEOUT 100 #define ERR_EXEC_TIMEOUT 101 #define ERR_RESTART_FAIL 102 #define ERR_RESTART 103 #define ERR_NO_WIN 104 // Keine *.Win Dateien gefunden #define ERR_NO_SID 105 // Keine *.Sid Dateien gefunden #define ERR_NO_FILE 106 // Datei nicht gefunden #endif