xref: /AOO41X/main/basic/source/sbx/sbxscan.cxx (revision 2ab8e59e44d5950d9c68a72781ee6b8163bb05bd)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_basic.hxx"
26 #include <tools/errcode.hxx>
27 #include <basic/sbx.hxx>
28 #include "sbxconv.hxx"
29 
30 #include "unotools/syslocale.hxx"
31 
32 #if defined ( UNX )
33 #include <stdlib.h>
34 #endif
35 
36 #ifndef _APP_HXX //autogen
37 #include <vcl/svapp.hxx>
38 #endif
39 #include <math.h>
40 #include <string.h>
41 #include <ctype.h>
42 
43 #include "sbxres.hxx"
44 #include <basic/sbxbase.hxx>
45 #include <basic/sbxform.hxx>
46 #include <svtools/svtools.hrc>
47 
48 #include "basrid.hxx"
49 #include "runtime.hxx"
50 
51 #include <svl/zforlist.hxx>
52 #include <comphelper/processfactory.hxx>
53 
54 
55 void ImpGetIntntlSep( sal_Unicode& rcDecimalSep, sal_Unicode& rcThousandSep )
56 {
57     SvtSysLocale aSysLocale;
58     const LocaleDataWrapper& rData = aSysLocale.GetLocaleData();
59 	rcDecimalSep = rData.getNumDecimalSep().GetBuffer()[0];
60 	rcThousandSep = rData.getNumThousandSep().GetBuffer()[0];
61 }
62 
63 // Scannen eines Strings nach BASIC-Konventionen
64 // Dies entspricht den ueblichen Konventionen, nur dass der Exponent
65 // auch ein D sein darf, was den Datentyp auf SbxDOUBLE festlegt.
66 // Die Routine versucht, den Datentyp so klein wie moeglich zu gestalten.
67 // Das ganze gibt auch noch einen Konversionsfehler, wenn der Datentyp
68 // Fixed ist und das ganze nicht hineinpasst!
69 
70 SbxError ImpScan( const ::rtl::OUString& rWSrc, double& nVal, SbxDataType& rType,
71 				  sal_uInt16* pLen, sal_Bool bAllowIntntl, sal_Bool bOnlyIntntl )
72 {
73 	::rtl::OString aBStr( ::rtl::OUStringToOString( rWSrc, RTL_TEXTENCODING_ASCII_US ) );
74 
75 	// Bei International Komma besorgen
76 	char cIntntlComma, cIntntl1000;
77 	char cNonIntntlComma = '.';
78 
79     sal_Unicode cDecimalSep, cThousandSep = 0;
80 	if( bAllowIntntl || bOnlyIntntl )
81 	{
82         ImpGetIntntlSep( cDecimalSep, cThousandSep );
83 		cIntntlComma = (char)cDecimalSep;
84         cIntntl1000 = (char)cThousandSep;
85 	}
86 	// Sonst einfach auch auf . setzen
87 	else
88 	{
89 		cIntntlComma = cNonIntntlComma;
90 		cIntntl1000 = cNonIntntlComma;	// Unschaedlich machen
91 	}
92 	// Nur International -> IntnlComma uebernehmen
93 	if( bOnlyIntntl )
94 	{
95 		cNonIntntlComma = cIntntlComma;
96 		cIntntl1000 = (char)cThousandSep;
97 	}
98 
99 	const char* pStart = aBStr.getStr();
100 	const char* p = pStart;
101 	char buf[ 80 ], *q = buf;
102 	sal_Bool bRes = sal_True;
103 	sal_Bool bMinus = sal_False;
104 	nVal = 0;
105 	SbxDataType eScanType = SbxSINGLE;
106 	// Whitespace wech
107 	while( *p &&( *p == ' ' || *p == '\t' ) ) p++;
108 	// Zahl? Dann einlesen und konvertieren.
109 	if( *p == '-' )
110 		p++, bMinus = sal_True;
111 	if( isdigit( *p ) ||( (*p == cNonIntntlComma || *p == cIntntlComma ||
112 			*p == cIntntl1000) && isdigit( *(p+1 ) ) ) )
113 	{
114 		short exp = 0;		// >0: Exponentteil
115 		short comma = 0;	// >0: Nachkomma
116 		short ndig = 0;		// Anzahl Ziffern
117 		short ncdig = 0;	// Anzahl Ziffern nach Komma
118 		ByteString aSearchStr( "0123456789DEde" );
119 		// Kommas ergaenzen
120 		aSearchStr += cNonIntntlComma;
121 		if( cIntntlComma != cNonIntntlComma )
122 			aSearchStr += cIntntlComma;
123 		if( bOnlyIntntl )
124 			aSearchStr += cIntntl1000;
125 		const char* pSearchStr = aSearchStr.GetBuffer();
126 		while( strchr( pSearchStr, *p ) && *p )
127 		{
128 			// 1000er-Trenner ueberlesen
129 			if( bOnlyIntntl && *p == cIntntl1000 )
130 			{
131 				p++;
132 				continue;
133 			}
134 
135 			// Komma oder Exponent?
136 			if( *p == cNonIntntlComma || *p == cIntntlComma )
137 			{
138 				// Immer '.' einfuegen, damit atof funktioniert
139 				p++;
140 				if( ++comma > 1 )
141 					continue;
142 				else
143 					*q++ = '.';
144 			}
145 			else if( strchr( "DdEe", *p ) )
146 			{
147 				if( ++exp > 1 )
148 				{
149 					p++; continue;
150 				}
151 				if( toupper( *p ) == 'D' )
152 					eScanType = SbxDOUBLE;
153 				*q++ = 'E'; p++;
154 				// Vorzeichen hinter Exponent?
155 				if( *p == '+' )
156 					p++;
157 				else
158 				if( *p == '-' )
159 					*q++ = *p++;
160 			}
161 			else
162 			{
163 				*q++ = *p++;
164 				if( comma && !exp ) ncdig++;
165 			}
166 			if( !exp ) ndig++;
167 		}
168 		*q = 0;
169 		// Komma, Exponent mehrfach vorhanden?
170 		if( comma > 1 || exp > 1 )
171 			bRes = sal_False;
172 		// Kann auf Integer gefaltet werden?
173 		if( !comma && !exp )
174 		{
175 			if( nVal >= SbxMININT && nVal <= SbxMAXINT )
176 				eScanType = SbxINTEGER;
177 			else if( nVal >= SbxMINLNG && nVal <= SbxMAXLNG )
178 				eScanType = SbxLONG;
179 		}
180 
181 		nVal = atof( buf );
182 		ndig = ndig - comma;
183 		// zu viele Zahlen fuer SINGLE?
184 		if( ndig > 15 || ncdig > 6 )
185 			eScanType = SbxDOUBLE;
186 
187 		// Typkennung?
188 		if( strchr( "%!&#", *p ) && *p ) p++;
189 	}
190 	// Hex/Oktalzahl? Einlesen und konvertieren:
191 	else if( *p == '&' )
192 	{
193 		p++;
194 		eScanType = SbxLONG;
195 		const char *cmp = "0123456789ABCDEF";
196 		char base = 16;
197 		char ndig = 8;
198 		char xch  = *p++;
199 		switch( toupper( xch ) )
200 		{
201 			case 'O': cmp = "01234567"; base = 8; ndig = 11; break;
202 			case 'H': break;
203 			default : bRes = sal_False;
204 		}
205 		long l = 0;
206 		int i;
207 		while( isalnum( *p ) )
208 		{
209 			char ch = sal::static_int_cast< char >( toupper( *p ) );
210 			p++;
211 			if( strchr( cmp, ch ) ) *q++ = ch;
212 			else bRes = sal_False;
213 		}
214 		*q = 0;
215 		for( q = buf; *q; q++ )
216 		{
217 			i =( *q & 0xFF ) - '0';
218 			if( i > 9 ) i -= 7;
219 			l =( l * base ) + i;
220 			if( !ndig-- )
221 				bRes = sal_False;
222 		}
223 		if( *p == '&' ) p++;
224 		nVal = (double) l;
225 		if( l >= SbxMININT && l <= SbxMAXINT )
226 			eScanType = SbxINTEGER;
227 	}
228 	else if ( SbiRuntime::isVBAEnabled() )
229 	{
230 		OSL_TRACE("Reporting error converting");
231 		return SbxERR_CONVERSION;
232 	}
233 	if( pLen )
234 		*pLen = (sal_uInt16) ( p - pStart );
235 	if( !bRes )
236 		return SbxERR_CONVERSION;
237 	if( bMinus )
238 		nVal = -nVal;
239 	rType = eScanType;
240 	return SbxERR_OK;
241 }
242 
243 // Schnittstelle fuer CDbl im Basic
244 SbxError SbxValue::ScanNumIntnl( const String& rSrc, double& nVal, sal_Bool bSingle )
245 {
246 	SbxDataType t;
247 	sal_uInt16 nLen = 0;
248 	SbxError nRetError = ImpScan( rSrc, nVal, t, &nLen,
249 		/*bAllowIntntl*/sal_False, /*bOnlyIntntl*/sal_True );
250 	// Komplett gelesen?
251 	if( nRetError == SbxERR_OK && nLen != rSrc.Len() )
252 		nRetError = SbxERR_CONVERSION;
253 
254 	if( bSingle )
255 	{
256 		SbxValues aValues( nVal );
257 		nVal = (double)ImpGetSingle( &aValues );	// Hier Error bei Overflow
258 	}
259 	return nRetError;
260 }
261 
262 ////////////////////////////////////////////////////////////////////////////
263 
264 static double roundArray[] = {
265 	5.0e+0, 0.5e+0,	0.5e-1,	0.5e-2,	0.5e-3,	0.5e-4,	0.5e-5,	0.5e-6,	0.5e-7,
266 	0.5e-8,	0.5e-9,	0.5e-10,0.5e-11,0.5e-12,0.5e-13,0.5e-14,0.5e-15 };
267 
268 /***************************************************************************
269 |*
270 |*	void myftoa( double, char *, short, short, sal_Bool, sal_Bool )
271 |*
272 |*	Beschreibung:		Konversion double --> ASCII
273 |*	Parameter:			double				die Zahl.
274 |*						char *				der Zielpuffer
275 |*						short				Anzahl Nachkommastellen
276 |*						short				Weite des Exponenten( 0=kein E )
277 |*						sal_Bool				sal_True: mit 1000er Punkten
278 |*						sal_Bool				sal_True: formatfreie Ausgabe
279 |*
280 ***************************************************************************/
281 
282 static void myftoa( double nNum, char * pBuf, short nPrec, short nExpWidth,
283 					sal_Bool bPt, sal_Bool bFix, sal_Unicode cForceThousandSep = 0 )
284 {
285 
286 	short nExp = 0;						// Exponent
287 	short nDig = nPrec + 1;				// Anzahl Digits in Zahl
288 	short nDec;							// Anzahl Vorkommastellen
289 	register int i, digit;
290 
291 	// Komma besorgen
292     sal_Unicode cDecimalSep, cThousandSep;
293     ImpGetIntntlSep( cDecimalSep, cThousandSep );
294     if( cForceThousandSep )
295         cThousandSep = cForceThousandSep;
296 
297 	// Exponentberechnung:
298 	nExp = 0;
299 	if( nNum > 0.0 )
300 	{
301 		while( nNum <   1.0 ) nNum *= 10.0, nExp--;
302 		while( nNum >= 10.0 ) nNum /= 10.0, nExp++;
303 	}
304 	if( !bFix && !nExpWidth )
305 		nDig = nDig + nExp;
306 	else if( bFix && !nPrec )
307 		nDig = nExp + 1;
308 
309 	// Zahl runden:
310 	if( (nNum += roundArray [( nDig > 16 ) ? 16 : nDig] ) >= 10.0 )
311 	{
312 		nNum = 1.0;
313 		++nExp;
314 		if( !nExpWidth ) ++nDig;
315 	}
316 
317 	// Bestimmung der Vorkommastellen:
318 	if( !nExpWidth )
319 	{
320 		if( nExp < 0 )
321 		{
322 			// #41691: Auch bei bFix eine 0 spendieren
323 			*pBuf++ = '0';
324 			if( nPrec ) *pBuf++ = (char)cDecimalSep;
325 			i = -nExp - 1;
326 			if( nDig <= 0 ) i = nPrec;
327 			while( i-- )	*pBuf++ = '0';
328 			nDec = 0;
329 		}
330 		else
331 			nDec = nExp+1;
332 	}
333 	else
334 		nDec = 1;
335 
336 	// Zahl ausgeben:
337 	if( nDig > 0 )
338 	{
339 		for( i = 0 ; ; ++i )
340 		{
341 			if( i < 16 )
342 			{
343 				digit = (int) nNum;
344 				*pBuf++ = sal::static_int_cast< char >(digit + '0');
345 				nNum =( nNum - digit ) * 10.0;
346 			} else
347 				*pBuf++ = '0';
348 			if( --nDig == 0 ) break;
349 			if( nDec )
350 			{
351 				nDec--;
352 				if( !nDec )
353 					*pBuf++ = (char)cDecimalSep;
354 				else if( !(nDec % 3 ) && bPt )
355 					*pBuf++ = (char)cThousandSep;
356 			}
357 		}
358 	}
359 
360 	// Exponent ausgeben:
361 	if( nExpWidth )
362 	{
363 		if( nExpWidth < 3 ) nExpWidth = 3;
364 		nExpWidth -= 2;
365 		*pBuf++ = 'E';
366 		*pBuf++ =( nExp < 0 ) ?( (nExp = -nExp ), '-' ) : '+';
367 		while( nExpWidth > 3 ) *pBuf++ = '0', nExpWidth--;
368 		if( nExp >= 100 || nExpWidth == 3 )
369 		{
370 			*pBuf++ = sal::static_int_cast< char >(nExp/100 + '0');
371 			nExp %= 100;
372 		}
373 		if( nExp/10 || nExpWidth >= 2 )
374 			*pBuf++ = sal::static_int_cast< char >(nExp/10 + '0');
375 		*pBuf++ = sal::static_int_cast< char >(nExp%10 + '0');
376 	}
377 	*pBuf = 0;
378 }
379 
380 // Die Zahl wird unformatiert mit der angegebenen Anzahl NK-Stellen
381 // aufbereitet. Evtl. wird ein Minus vorangestellt.
382 // Diese Routine ist public, weil sie auch von den Put-Funktionen
383 // der Klasse SbxImpSTRING verwendet wird.
384 
385 #ifdef _MSC_VER
386 #pragma optimize( "", off )
387 #pragma warning(disable: 4748) // "... because optimizations are disabled ..."
388 #endif
389 
390 void ImpCvtNum( double nNum, short nPrec, ::rtl::OUString& rRes, sal_Bool bCoreString )
391 {
392 	char *q;
393 	char cBuf[ 40 ], *p = cBuf;
394 
395     sal_Unicode cDecimalSep, cThousandSep;
396     ImpGetIntntlSep( cDecimalSep, cThousandSep );
397     if( bCoreString )
398         cDecimalSep = '.';
399 
400 	if( nNum < 0.0 ) {
401 		nNum = -nNum;
402 		*p++ = '-';
403 	}
404 	double dMaxNumWithoutExp = (nPrec == 6) ? 1E6 : 1E14;
405 	myftoa( nNum, p, nPrec,( nNum &&( nNum < 1E-1 || nNum > dMaxNumWithoutExp ) ) ? 4:0,
406         sal_False, sal_True, cDecimalSep );
407 	// Trailing Zeroes weg:
408 	for( p = cBuf; *p &&( *p != 'E' ); p++ ) {}
409 	q = p; p--;
410 	while( nPrec && *p == '0' ) nPrec--, p--;
411 	if( *p == cDecimalSep ) p--;
412 	while( *q ) *++p = *q++;
413 	*++p = 0;
414 	rRes = ::rtl::OUString::createFromAscii( cBuf );
415 }
416 
417 #ifdef _MSC_VER
418 #pragma optimize( "", on )
419 #endif
420 
421 sal_Bool ImpConvStringExt( ::rtl::OUString& rSrc, SbxDataType eTargetType )
422 {
423 	// Merken, ob ueberhaupt was geaendert wurde
424 	sal_Bool bChanged = sal_False;
425 	::rtl::OUString aNewString;
426 
427 	// Nur Spezial-F�lle behandeln, als Default tun wir nichts
428 	switch( eTargetType )
429 	{
430 		// Bei Fliesskomma International beruecksichtigen
431 		case SbxSINGLE:
432 		case SbxDOUBLE:
433 		case SbxCURRENCY:
434 		{
435 			::rtl::OString aBStr( ::rtl::OUStringToOString( rSrc, RTL_TEXTENCODING_ASCII_US ) );
436 
437 			// Komma besorgen
438             sal_Unicode cDecimalSep, cThousandSep;
439             ImpGetIntntlSep( cDecimalSep, cThousandSep );
440 			aNewString = rSrc;
441 
442 			// Ersetzen, wenn DecimalSep kein '.' (nur den ersten)
443 			if( cDecimalSep != (sal_Unicode)'.' )
444 			{
445 				sal_Int32 nPos = aNewString.indexOf( cDecimalSep );
446 				if( nPos != -1 )
447 				{
448                     sal_Unicode* pStr = (sal_Unicode*)aNewString.getStr();
449 					pStr[nPos] = (sal_Unicode)'.';
450 					bChanged = sal_True;
451 				}
452 			}
453 			break;
454 		}
455 
456 		// Bei sal_Bool sal_True und sal_False als String pruefen
457 		case SbxBOOL:
458 		{
459 			if( rSrc.equalsIgnoreAsciiCaseAscii( "true" ) )
460 			{
461 				aNewString = ::rtl::OUString::valueOf( (sal_Int32)SbxTRUE );
462 				bChanged = sal_True;
463 			}
464 			else
465 			if( rSrc.equalsIgnoreAsciiCaseAscii( "false" ) )
466 			{
467 				aNewString = ::rtl::OUString::valueOf( (sal_Int32)SbxFALSE );
468 				bChanged = sal_True;
469 			}
470 			break;
471 		}
472 		default: break;
473 	}
474 	// String bei Aenderung uebernehmen
475 	if( bChanged )
476 		rSrc = aNewString;
477 	return bChanged;
478 }
479 
480 
481 // Formatierte Zahlenausgabe
482 // Der Returnwert ist die Anzahl Zeichen, die aus dem
483 // Format verwendt wurden.
484 
485 #ifdef _old_format_code_
486 // lasse diesen Code vorl"aufig drin, zum 'abgucken'
487 // der bisherigen Implementation
488 
489 static sal_uInt16 printfmtnum( double nNum, XubString& rRes, const XubString& rWFmt )
490 {
491 	const String& rFmt = rWFmt;
492 	char	cFill  = ' ';			// Fuellzeichen
493 	char	cPre   = 0;				// Startzeichen( evtl. "$" )
494 	short	nExpDig= 0;				// Anzahl Exponentstellen
495 	short	nPrec  = 0;				// Anzahl Nachkommastellen
496 	short	nWidth = 0;				// Zahlenweite gesamnt
497 	short	nLen;					// Laenge konvertierte Zahl
498 	sal_Bool	bPoint = sal_False;			// sal_True: mit 1000er Kommas
499 	sal_Bool	bTrail = sal_False;			// sal_True, wenn folgendes Minus
500 	sal_Bool	bSign  = sal_False;			// sal_True: immer mit Vorzeichen
501 	sal_Bool	bNeg   = sal_False;			// sal_True: Zahl ist negativ
502 	char	cBuf [1024];			// Zahlenpuffer
503 	char  * p;
504 	const char* pFmt = rFmt;
505 	rRes.Erase();
506 	// $$ und ** abfangen. Einfach wird als Zeichen ausgegeben.
507 	if( *pFmt == '$' )
508 	  if( *++pFmt != '$' ) rRes += '$';
509 	if( *pFmt == '*' )
510 	  if( *++pFmt != '*' ) rRes += '*';
511 
512 	switch( *pFmt++ )
513 	{
514 		case 0:
515 			break;
516 		case '+':
517 			bSign = sal_True; nWidth++; break;
518 		case '*':
519 			nWidth++; cFill = '*';
520 			if( *pFmt == '$' ) nWidth++, pFmt++, cPre = '$';
521 			break;
522 		case '$':
523 			nWidth++; cPre = '$'; break;
524 		case '#':
525 		case '.':
526 		case ',':
527 			pFmt--; break;
528 	}
529 	// Vorkomma:
530 	for( ;; )
531 	{
532 		while( *pFmt == '#' ) pFmt++, nWidth++;
533 		// 1000er Kommas?
534 		if( *pFmt == ',' )
535 		{
536 			nWidth++; pFmt++; bPoint = sal_True;
537 		} else break;
538 	}
539 	// Nachkomma:
540 	if( *pFmt == '.' )
541 	{
542 		while( *++pFmt == '#' ) nPrec++;
543 		nWidth += nPrec + 1;
544 	}
545 	// Exponent:
546 	while( *pFmt == '^' )
547 		pFmt++, nExpDig++, nWidth++;
548 	// Folgendes Minus:
549 	if( !bSign && *pFmt == '-' )
550 		pFmt++, bTrail = sal_True;
551 
552 	// Zahl konvertieren:
553 	if( nPrec > 15 ) nPrec = 15;
554 	if( nNum < 0.0 ) nNum = -nNum, bNeg = sal_True;
555 	p = cBuf;
556 	if( bSign ) *p++ = bNeg ? '-' : '+';
557 	myftoa( nNum, p, nPrec, nExpDig, bPoint, sal_False );
558 	nLen = strlen( cBuf );
559 
560 	// Ueberlauf?
561 	if( cPre ) nLen++;
562 	if( nLen > nWidth ) rRes += '%';
563 	else {
564 		nWidth -= nLen;
565 		while( nWidth-- ) rRes += (xub_Unicode)cFill;
566 		if( cPre ) rRes += (xub_Unicode)cPre;
567 	}
568 	rRes += (xub_Unicode*)&(cBuf[0]);
569 	if( bTrail )
570 		rRes += bNeg ? '-' : ' ';
571 
572 	return (sal_uInt16) ( pFmt - (const char*) rFmt );
573 }
574 
575 #endif //_old_format_code_
576 
577 static sal_uInt16 printfmtstr( const XubString& rStr, XubString& rRes, const XubString& rFmt )
578 {
579 	const xub_Unicode* pStr = rStr.GetBuffer();
580 	const xub_Unicode* pFmtStart = rFmt.GetBuffer();
581 	const xub_Unicode* pFmt = pFmtStart;
582 	rRes.Erase();
583 	switch( *pFmt )
584 	{
585 		case '!':
586 				rRes += *pStr++; pFmt++; break;
587 		case '\\':
588 			do
589 			{
590 				rRes += *pStr ? *pStr++ : static_cast< xub_Unicode >(' ');
591 				pFmt++;
592 			} while( *pFmt != '\\' );
593 			rRes += *pStr ? *pStr++ : static_cast< xub_Unicode >(' ');
594 			pFmt++; break;
595 		case '&':
596 			rRes = rStr;
597 			pFmt++; break;
598 		default:
599 			rRes = rStr;
600 			break;
601 	}
602 	return (sal_uInt16) ( pFmt - pFmtStart );
603 }
604 
605 /////////////////////////////////////////////////////////////////////////
606 
607 sal_Bool SbxValue::Scan( const XubString& rSrc, sal_uInt16* pLen )
608 {
609 	SbxError eRes = SbxERR_OK;
610 	if( !CanWrite() )
611 		eRes = SbxERR_PROP_READONLY;
612 	else
613 	{
614 		double n;
615 		SbxDataType t;
616 		eRes = ImpScan( rSrc, n, t, pLen );
617 		if( eRes == SbxERR_OK )
618 		{
619 			if( !IsFixed() )
620 				SetType( t );
621 			PutDouble( n );
622 		}
623 	}
624 	if( eRes )
625 	{
626 		SetError( eRes ); return sal_False;
627 	}
628 	else
629 		return sal_True;
630 }
631 
632 
633 ResMgr* implGetResMgr( void )
634 {
635 	static ResMgr* pResMgr = NULL;
636 	if( !pResMgr )
637 	{
638 		::com::sun::star::lang::Locale aLocale = Application::GetSettings().GetUILocale();
639 		pResMgr = ResMgr::CreateResMgr(CREATEVERSIONRESMGR_NAME(sb), aLocale );
640 	}
641 	return pResMgr;
642 }
643 
644 class SbxValueFormatResId : public ResId
645 {
646 public:
647 	SbxValueFormatResId( sal_uInt16 nId )
648 		: ResId( nId, *implGetResMgr() )
649 	{}
650 };
651 
652 
653 enum VbaFormatType
654 {
655     VBA_FORMAT_TYPE_OFFSET, // standard number format
656     VBA_FORMAT_TYPE_USERDEFINED, // user defined number format
657     VBA_FORMAT_TYPE_NULL
658 };
659 
660 struct VbaFormatInfo
661 {
662     VbaFormatType meType;
663     const char* mpVbaFormat; // Format string in vba
664     NfIndexTableOffset meOffset; // SvNumberFormatter format index, if meType = VBA_FORMAT_TYPE_OFFSET
665     const char* mpOOoFormat; // if meType = VBA_FORMAT_TYPE_USERDEFINED
666 };
667 
668 #define VBA_FORMAT_OFFSET( pcUtf8, eOffset ) \
669     { VBA_FORMAT_TYPE_OFFSET, pcUtf8, eOffset, 0 }
670 
671 #define VBA_FORMAT_USERDEFINED( pcUtf8, pcDefinedUtf8 ) \
672     { VBA_FORMAT_TYPE_USERDEFINED, pcUtf8, NF_NUMBER_STANDARD, pcDefinedUtf8 }
673 
674 static VbaFormatInfo pFormatInfoTable[] =
675 {
676     VBA_FORMAT_OFFSET( "Long Date", NF_DATE_SYSTEM_LONG ),
677     VBA_FORMAT_USERDEFINED( "Medium Date", "DD-MMM-YY" ),
678     VBA_FORMAT_OFFSET( "Short Date", NF_DATE_SYSTEM_SHORT ),
679     VBA_FORMAT_USERDEFINED( "Long Time", "H:MM:SS AM/PM" ),
680     VBA_FORMAT_OFFSET( "Medium Time", NF_TIME_HHMMAMPM ),
681     VBA_FORMAT_OFFSET( "Short Time", NF_TIME_HHMM ),
682     VBA_FORMAT_OFFSET( "ddddd", NF_DATE_SYSTEM_SHORT ),
683     VBA_FORMAT_OFFSET( "dddddd", NF_DATE_SYSTEM_LONG ),
684     VBA_FORMAT_USERDEFINED( "ttttt", "H:MM:SS AM/PM" ),
685     VBA_FORMAT_OFFSET( "ww", NF_DATE_WW ),
686     { VBA_FORMAT_TYPE_NULL, 0, NF_INDEX_TABLE_ENTRIES, 0 }
687 };
688 
689 VbaFormatInfo* getFormatInfo( const String& rFmt )
690 {
691     VbaFormatInfo* pInfo = NULL;
692     sal_Int16 i = 0;
693     while( (pInfo = pFormatInfoTable + i )->mpVbaFormat != NULL )
694     {
695         if( rFmt.EqualsIgnoreCaseAscii( pInfo->mpVbaFormat ) )
696             break;
697         i++;
698     }
699     return pInfo;
700 }
701 
702 #define VBAFORMAT_GENERALDATE       "General Date"
703 #define VBAFORMAT_C                 "c"
704 #define VBAFORMAT_N                 "n"
705 #define VBAFORMAT_NN                "nn"
706 #define VBAFORMAT_W                 "w"
707 #define VBAFORMAT_Y                 "y"
708 #define VBAFORMAT_LOWERCASE  		"<"
709 #define VBAFORMAT_UPPERCASE  		">"
710 
711 // From methods1.cxx
712 sal_Int16 implGetWeekDay( double aDate, bool bFirstDayParam = false, sal_Int16 nFirstDay = 0 );
713 // from methods.cxx
714 sal_Int16 implGetMinute( double dDate );
715 sal_Int16 implGetDateYear( double aDate );
716 sal_Bool implDateSerial( sal_Int16 nYear, sal_Int16 nMonth, sal_Int16 nDay, double& rdRet );
717 
718 void SbxValue::Format( XubString& rRes, const XubString* pFmt ) const
719 {
720 	short nComma = 0;
721 	double d = 0;
722 
723 	// pflin, It is better to use SvNumberFormatter to handle the date/time/number format.
724 	// the SvNumberFormatter output is mostly compatible with
725 	// VBA output besides the OOo-basic output
726 	if( pFmt && !SbxBasicFormater::isBasicFormat( *pFmt ) )
727 	{
728 		String aStr = GetString();
729 
730 		if( pFmt->EqualsIgnoreCaseAscii( VBAFORMAT_LOWERCASE ) )
731 		{
732 			rRes = aStr.ToLowerAscii();
733 			return;
734 		}
735 		if( pFmt->EqualsIgnoreCaseAscii( VBAFORMAT_UPPERCASE ) )
736 		{
737 			rRes = aStr.ToUpperAscii();
738 			return;
739 		}
740 
741 		LanguageType eLangType = GetpApp()->GetSettings().GetLanguage();
742 		com::sun::star::uno::Reference< com::sun::star::lang::XMultiServiceFactory >
743 			xFactory = comphelper::getProcessServiceFactory();
744 		SvNumberFormatter aFormatter( xFactory, eLangType );
745 
746 		sal_uInt32 nIndex;
747 		xub_StrLen nCheckPos = 0;
748 		short nType;
749 		double nNumber;
750 		Color* pCol;
751 
752 	    sal_Bool bSuccess = aFormatter.IsNumberFormat( aStr, nIndex, nNumber );
753 
754     	// number format, use SvNumberFormatter to handle it.
755 	    if( bSuccess )
756     	{
757 			String aFmtStr = *pFmt;
758 	        VbaFormatInfo* pInfo = getFormatInfo( aFmtStr );
759     	    if( pInfo && pInfo->meType != VBA_FORMAT_TYPE_NULL )
760        		{
761             	if( pInfo->meType == VBA_FORMAT_TYPE_OFFSET )
762 	            {
763     	            nIndex = aFormatter.GetFormatIndex( pInfo->meOffset, eLangType );
764             	}
765         	    else
766            		{
767                 	aFmtStr.AssignAscii( pInfo->mpOOoFormat );
768 	                aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
769     	        }
770 	    	    aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
771 	        }
772     	    else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_GENERALDATE )
773         	        || aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_C ))
774 	        {
775             	if( nNumber <=-1.0 || nNumber >= 1.0 )
776         	    {
777     	            // short date
778             	    nIndex = aFormatter.GetFormatIndex( NF_DATE_SYSTEM_SHORT, eLangType );
779 	           		aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
780 
781 	                // long time
782     	            if( floor( nNumber ) != nNumber )
783         	        {
784                 		aFmtStr.AssignAscii( "H:MM:SS AM/PM" );
785 		                aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
786                 	    String aTime;
787 		                aFormatter.GetOutputString( nNumber, nIndex, aTime, &pCol );
788     	                rRes.AppendAscii(" ");
789             	        rRes += aTime;
790         	        }
791             	}
792 	            else
793     	        {
794         	        // long time only
795                 	aFmtStr.AssignAscii( "H:MM:SS AM/PM" );
796 		            aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
797 	            	aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
798 	            }
799     	    }
800         	else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_N )
801             	    || aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_NN ))
802 	        {
803     	        sal_Int32 nMin = implGetMinute( nNumber );
804         	    if( nMin < 10 && aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_NN ) )
805             	{
806                 	// Minute in two digits
807 	                 sal_Unicode* p = rRes.AllocBuffer( 2 );
808     	             *p++ = '0';
809         	         *p = sal_Unicode( '0' + nMin );
810             	}
811 	            else
812     	        {
813         	        rRes = String::CreateFromInt32( nMin );
814             	}
815 	        }
816     	    else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_W ))
817         	{
818 	            sal_Int32 nWeekDay = implGetWeekDay( nNumber );
819     	        rRes = String::CreateFromInt32( nWeekDay );
820         	}
821 	        else if( aFmtStr.EqualsIgnoreCaseAscii( VBAFORMAT_Y ))
822     	    {
823 				sal_Int16 nYear = implGetDateYear( nNumber );
824 				double dBaseDate;
825 				implDateSerial( nYear, 1, 1, dBaseDate );
826 				sal_Int32 nYear32 = 1 + sal_Int32( nNumber - dBaseDate );
827             	rRes = String::CreateFromInt32( nYear32 );
828 	        }
829     	    else
830         	{
831 	            aFormatter.PutandConvertEntry( aFmtStr, nCheckPos, nType, nIndex, LANGUAGE_ENGLISH, eLangType );
832 		        aFormatter.GetOutputString( nNumber, nIndex, rRes, &pCol );
833         	}
834 
835 			return;
836 	    }
837 	}
838 
839 	SbxDataType eType = GetType();
840 	switch( eType )
841 	{
842 		case SbxCHAR:
843 		case SbxBYTE:
844 		case SbxINTEGER:
845 		case SbxUSHORT:
846 		case SbxLONG:
847 		case SbxULONG:
848 		case SbxINT:
849 		case SbxUINT:
850 		case SbxNULL:		// #45929 NULL mit durchschummeln
851 			nComma = 0;		goto cvt;
852 		case SbxSINGLE:
853 			nComma = 6;		goto cvt;
854 		case SbxDOUBLE:
855 			nComma = 14;
856 
857 		cvt:
858 			if( eType != SbxNULL )
859 				d = GetDouble();
860 
861 			// #45355 weiterer Einsprungpunkt fuer isnumeric-String
862 		cvt2:
863 			if( pFmt )
864 			{
865 				// hole die 'statischen' Daten f"ur Sbx
866 				SbxAppData* pData = GetSbxData_Impl();
867 
868                 LanguageType eLangType = GetpApp()->GetSettings().GetLanguage();
869 				if( pData->pBasicFormater )
870                 {
871                     if( pData->eBasicFormaterLangType != eLangType )
872                     {
873                         delete pData->pBasicFormater;
874                         pData->pBasicFormater = NULL;
875                     }
876                 }
877                 pData->eBasicFormaterLangType = eLangType;
878 
879 				// falls bisher noch kein BasicFormater-Objekt
880 				// existiert, so erzeuge dieses
881 				if( !pData->pBasicFormater )
882 				{
883                     SvtSysLocale aSysLocale;
884                     const LocaleDataWrapper& rData = aSysLocale.GetLocaleData();
885 					sal_Unicode cComma = rData.getNumDecimalSep().GetBuffer()[0];
886 					sal_Unicode c1000  = rData.getNumThousandSep().GetBuffer()[0];
887 					String aCurrencyStrg = rData.getCurrSymbol();
888 
889 					// Initialisierung des Basic-Formater-Hilfsobjekts:
890 					// hole die Resourcen f"ur die vordefinierten Ausgaben
891 					// des Format()-Befehls, z.B. f"ur "On/Off".
892 					String aOnStrg = String( SbxValueFormatResId(
893 						STR_BASICKEY_FORMAT_ON ) );
894 					String aOffStrg = String( SbxValueFormatResId(
895 						STR_BASICKEY_FORMAT_OFF) );
896 					String aYesStrg = String( SbxValueFormatResId(
897 						STR_BASICKEY_FORMAT_YES) );
898 					String aNoStrg = String( SbxValueFormatResId(
899 						STR_BASICKEY_FORMAT_NO) );
900 					String aTrueStrg = String( SbxValueFormatResId(
901 						STR_BASICKEY_FORMAT_TRUE) );
902 					String aFalseStrg = String( SbxValueFormatResId(
903 						STR_BASICKEY_FORMAT_FALSE) );
904 					String aCurrencyFormatStrg = String( SbxValueFormatResId(
905 						STR_BASICKEY_FORMAT_CURRENCY) );
906 					// erzeuge das Basic-Formater-Objekt
907 					pData->pBasicFormater
908 						= new SbxBasicFormater( cComma,c1000,aOnStrg,aOffStrg,
909 									aYesStrg,aNoStrg,aTrueStrg,aFalseStrg,
910 									aCurrencyStrg,aCurrencyFormatStrg );
911 				}
912 				// Bem.: Aus Performance-Gr"unden wird nur EIN BasicFormater-
913 				//    Objekt erzeugt und 'gespeichert', dadurch erspart man
914 				// 	  sich das teure Resourcen-Laden (f"ur landesspezifische
915 				//    vordefinierte Ausgaben, z.B. "On/Off") und die st"andige
916 				//    String-Erzeugungs Operationen.
917 				// ABER: dadurch ist dieser Code NICHT multithreading f"ahig !
918 
919 				// hier gibt es Probleme mit ;;;Null, da diese Methode nur aufgerufen
920 				// wird, wenn der SbxValue eine Zahl ist !!!
921 				// dazu koennte: pData->pBasicFormater->BasicFormatNull( *pFmt ); aufgerufen werden !
922 				if( eType != SbxNULL )
923 				{
924 					rRes = pData->pBasicFormater->BasicFormat( d ,*pFmt );
925 				}
926 				else
927 				{
928 					rRes = pData->pBasicFormater->BasicFormatNull( *pFmt );
929 				}
930 
931 				// Die alte Implementierung:
932 				//old: printfmtnum( GetDouble(), rRes, *pFmt );
933 			}
934 			else
935             {
936                 ::rtl::OUString aTmpString( rRes );
937 				ImpCvtNum( GetDouble(), nComma, aTmpString );
938                 rRes = aTmpString;
939             }
940 			break;
941 		case SbxSTRING:
942 			if( pFmt )
943 			{
944 				// #45355 wenn es numerisch ist, muss gewandelt werden
945 				if( IsNumericRTL() )
946 				{
947 					ScanNumIntnl( GetString(), d, /*bSingle*/sal_False );
948 					goto cvt2;
949 				}
950 				else
951 				{
952 					// Sonst String-Formatierung
953 					printfmtstr( GetString(), rRes, *pFmt );
954 				}
955 			}
956 			else
957 				rRes = GetString();
958 			break;
959 		default:
960 			rRes = GetString();
961 	}
962 }
963 
964 
965