xref: /AOO41X/main/fpicker/source/office/iodlg.cxx (revision ff0525f24f03981d56b7579b645949f111420994)
1 /**************************************************************
2  *
3  * Licensed to the Apache Software Foundation (ASF) under one
4  * or more contributor license agreements.  See the NOTICE file
5  * distributed with this work for additional information
6  * regarding copyright ownership.  The ASF licenses this file
7  * to you under the Apache License, Version 2.0 (the
8  * "License"); you may not use this file except in compliance
9  * with the License.  You may obtain a copy of the License at
10  *
11  *   http://www.apache.org/licenses/LICENSE-2.0
12  *
13  * Unless required by applicable law or agreed to in writing,
14  * software distributed under the License is distributed on an
15  * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
16  * KIND, either express or implied.  See the License for the
17  * specific language governing permissions and limitations
18  * under the License.
19  *
20  *************************************************************/
21 
22 
23 
24 // MARKER(update_precomp.py): autogen include statement, do not remove
25 #include "precompiled_fpicker.hxx"
26 
27 // includes --------------------------------------------------------------
28 
29 #include "iodlg.hxx"
30 #include <tools/stream.hxx>
31 #include <tools/urlobj.hxx>
32 #include <vcl/fixed.hxx>
33 #include <vcl/lstbox.hxx>
34 #include <vcl/msgbox.hxx>
35 #include <vcl/svapp.hxx>
36 #include <vcl/timer.hxx>
37 #include <unotools/ucbhelper.hxx>
38 #include <ucbhelper/contentbroker.hxx>
39 #include "svtools/ehdl.hxx"
40 #include "svl/urihelper.hxx"
41 #include "unotools/pathoptions.hxx"
42 #include "unotools/viewoptions.hxx"
43 #include "svtools/fileview.hxx"
44 #include "unotools/inetoptions.hxx"
45 #include "svtools/sfxecode.hxx"
46 #include "svl/svarray.hxx"
47 #include "svtools/svtabbx.hxx"
48 
49 #define _SVSTDARR_USHORTS
50 #define _SVSTDARR_STRINGSDTOR
51 #include "svl/svstdarr.hxx"
52 #include <toolkit/helper/vclunohelper.hxx>
53 #include <unotools/localfilehelper.hxx>
54 
55 #ifndef _SVTOOLS_HRC
56 #include "svtools/svtools.hrc"
57 #endif
58 #ifndef _SVT_HELPID_HRC
59 #include "svtools/helpid.hrc"
60 #endif
61 #ifndef _SVTOOLS_IODLGIMPL_HRC
62 #include "iodlg.hrc"
63 #endif
64 #include "rtl/instance.hxx"
65 #include "asyncfilepicker.hxx"
66 #include "iodlgimp.hxx"
67 #include "svtools/inettbc.hxx"
68 #include "unotools/syslocale.hxx"
69 #include "svtools/QueryFolderName.hxx"
70 #ifndef  _RTL_USTRING_HXX
71 #include <rtl/ustring.hxx>
72 #endif
73 #include <com/sun/star/lang/XMultiServiceFactory.hpp>
74 #include <com/sun/star/ucb/XContentProviderManager.hpp>
75 #include <com/sun/star/ui/dialogs/CommonFilePickerElementIds.hpp>
76 #include <com/sun/star/ui/dialogs/ExtendedFilePickerElementIds.hpp>
77 #include <com/sun/star/ui/dialogs/ControlActions.hpp>
78 #include <com/sun/star/beans/PropertyValue.hpp>
79 #include <com/sun/star/sdbc/XResultSet.hpp>
80 #include <com/sun/star/sdbc/XRow.hpp>
81 #include <com/sun/star/util/URL.hpp>
82 #include <com/sun/star/uno/Exception.hpp>
83 #include <com/sun/star/uno/Reference.hxx>
84 #include <com/sun/star/util/XURLTransformer.hpp>
85 #include <com/sun/star/uno/RuntimeException.hpp>
86 #include <com/sun/star/beans/XPropertySet.hpp>
87 
88 #ifndef _UNOTOOLS_PROCESSFACTORY_HXX
89 #include <comphelper/processfactory.hxx>
90 #endif
91 #include <osl/file.h>
92 #include <vcl/waitobj.hxx>
93 
94 // #97148# ------------------------------------
95 #include <com/sun/star/task/XInteractionHandler.hpp>
96 #include "com/sun/star/ucb/InteractiveAugmentedIOException.hpp"
97 #include "fpinteraction.hxx"
98 #include <osl/process.h>
99 #include <comphelper/interaction.hxx>
100 
101 #include <algorithm>
102 #include <functional>
103 
104 //#define AUTOSELECT_USERFILTER
105     // define this for the experimental feature of user-filter auto selection
106     // means if the user enters e.g. *.doc<enter>, and there is a filter which is responsible for *.doc files (only),
107     // then this filter is selected automatically
108 
109 using namespace ::com::sun::star::beans;
110 using namespace ::com::sun::star::frame;
111 using namespace ::com::sun::star::ui::dialogs;
112 using namespace ::com::sun::star::uno;
113 using namespace ::com::sun::star::lang;
114 using namespace ::com::sun::star::ucb;
115 using namespace ::com::sun::star::container;
116 using namespace ::com::sun::star::task;
117 using namespace ::com::sun::star::sdbc;
118 using namespace ::utl;
119 using namespace ::svt;
120 
121 using namespace ExtendedFilePickerElementIds;
122 using namespace CommonFilePickerElementIds;
123 using namespace InternalFilePickerElementIds;
124 
125 #define IODLG_CONFIGNAME        String(RTL_CONSTASCII_USTRINGPARAM("FileDialog"))
126 #define IMPGRF_CONFIGNAME       String(RTL_CONSTASCII_USTRINGPARAM("ImportGraphicDialog"))
127 
128 #define GET_DECODED_NAME(aObj) \
129     aObj.getName( INetURLObject::LAST_SEGMENT, true, INetURLObject::DECODE_WITH_CHARSET )
130 
131 // Zeit die beim Traveln in der Filterbox gewartet wird,
132 // bis in der Browsebox gefiltert wird ( in ms ).
133 #define TRAVELFILTER_TIMEOUT    750
134 
135 #define WIDTH_ADDITION  15
136 
137 // functions -------------------------------------------------------------
138 
139 namespace
140 {
141 
142     //-----------------------------------------------------------------------------
143     String getMostCurrentFilter( SvtExpFileDlg_Impl* pImpl )
144     {
145         DBG_ASSERT( pImpl, "invalid impl pointer" );
146         const SvtFileDialogFilter_Impl* pFilter = pImpl->_pUserFilter;
147 
148         if ( !pFilter )
149             pFilter = pImpl->GetCurFilter();
150 
151         // Filtern.
152         if ( !pFilter )
153             return String();
154 
155         return pFilter->GetType();
156     }
157 
158     //-----------------------------------------------------------------------------
159     sal_Bool restoreCurrentFilter( SvtExpFileDlg_Impl* _pImpl )
160     {
161         DBG_ASSERT( _pImpl->GetCurFilter(), "restoreCurrentFilter: no current filter!" );
162         DBG_ASSERT( _pImpl->GetCurFilterDisplayName().Len(), "restoreCurrentFilter: no current filter (no display name)!" );
163 
164         _pImpl->SelectFilterListEntry( _pImpl->GetCurFilterDisplayName() );
165 
166 #ifdef DBG_UTIL
167         String sSelectedDisplayName;
168         DBG_ASSERT( ( _pImpl->GetSelectedFilterEntry( sSelectedDisplayName ) == _pImpl->GetCurFilter() )
169                 &&  ( sSelectedDisplayName == _pImpl->GetCurFilterDisplayName() ),
170             "restoreCurrentFilter: inconsistence!" );
171 #endif
172         return _pImpl->m_bNeedDelayedFilterExecute;
173     }
174 
175     //-----------------------------------------------------------------------------
176     String GetFsysExtension_Impl( const String& rFile, const String& rLastFilterExt )
177     {
178         xub_StrLen nDotPos = rFile.SearchBackward( '.' );
179         if ( nDotPos != STRING_NOTFOUND )
180         {
181             if ( rLastFilterExt.Len() )
182             {
183                 if ( rFile.Copy( nDotPos + 1 ).EqualsIgnoreCaseAscii( rLastFilterExt ) )
184                     return String( rLastFilterExt );
185             }
186             else
187                 return String( rFile.Copy( nDotPos ) );
188         }
189         return String();
190     }
191 
192     //-----------------------------------------------------------------------------
193     void SetFsysExtension_Impl( String& rFile, const String& rExtension )
194     {
195         const sal_Unicode* p0 = rFile.GetBuffer();
196         const sal_Unicode* p1 = p0 + rFile.Len() - 1;
197         while ( p1 >= p0 && *p1 != sal_Unicode( '.' ) )
198             p1--;
199         if ( p1 >= p0 )
200             // remove old extension
201             rFile.Erase(
202                 sal::static_int_cast< xub_StrLen >(
203                     p1 - p0 + 1 - ( rExtension.Len() > 0 ? 0 : 1 ) ) );
204         else if ( rExtension.Len() )
205             // no old extension
206             rFile += sal_Unicode( '.' );
207         rFile += rExtension;
208     }
209 
210     //-----------------------------------------------------------------------------
211     // move the control with the given offset
212     void lcl_MoveControl( Control* _pControl, sal_Int32 _nDeltaX, sal_Int32 _nDeltaY, sal_Int32* _pMaxY = NULL )
213     {
214         if ( _pControl )
215         {
216             Point aNewPos = _pControl->GetPosPixel();
217 
218             // adjust the vertical position
219             aNewPos.Y() += _nDeltaY;
220             if ( _pMaxY && ( aNewPos.Y() > *_pMaxY ) )
221                 *_pMaxY = aNewPos.Y();
222 
223             // adjust the horizontal position
224             aNewPos.X() += _nDeltaX;
225 
226             _pControl->SetPosPixel( aNewPos );
227         }
228     }
229 
230     //-------------------------------------------------------------------------
231     void lcl_autoUpdateFileExtension( SvtFileDialog* _pDialog, const String& _rLastFilterExt )
232     {
233         // if auto extension is enabled ....
234         if ( _pDialog->isAutoExtensionEnabled() )
235         {
236             // automatically switch to the extension of the (maybe just newly selected) extension
237             String aNewFile = _pDialog->getCurrentFileText( );
238             String aExt = GetFsysExtension_Impl( aNewFile, _rLastFilterExt );
239 
240             // but only if there already is an extension
241             if ( aExt.Len() )
242             {
243                 // check if it is a real file extension, and not only the "post-dot" part in
244                 // a directory name
245                 // 28.03.2002 - 98337 - fs@openoffice.org
246                 sal_Bool bRealExtensions = sal_True;
247                 if ( STRING_NOTFOUND != aExt.Search( '/' ) )
248                     bRealExtensions = sal_False;
249                 else if ( STRING_NOTFOUND != aExt.Search( '\\' ) )
250                     bRealExtensions = sal_False;
251                 else
252                 {
253                     // no easy way to tell, because the part containing the dot already is the last
254                     // segment of the complete file name
255                     // So we have to check if the file name denotes a folder or a file.
256                     // For performance reasons, we do this for file urls only
257                     INetURLObject aURL( aNewFile );
258                     if ( INET_PROT_NOT_VALID == aURL.GetProtocol() )
259                     {
260                         String sURL;
261                         if ( ::utl::LocalFileHelper::ConvertPhysicalNameToURL( aNewFile, sURL ) )
262                             aURL = INetURLObject( sURL );
263                     }
264                     if ( INET_PROT_FILE == aURL.GetProtocol() )
265                     {
266                         // #97148# & #102204# -----
267                         try
268                         {
269                             bRealExtensions = !_pDialog->ContentIsFolder( aURL.GetMainURL( INetURLObject::NO_DECODE ) );
270                         }
271                         catch( ::com::sun::star::uno::Exception& )
272                         {
273                             DBG_WARNING( "Exception in lcl_autoUpdateFileExtension" );
274                         }
275                     }
276                 }
277 
278                 if ( bRealExtensions )
279                 {
280                     SetFsysExtension_Impl( aNewFile, _pDialog->GetDefaultExt() );
281                     _pDialog->setCurrentFileText( aNewFile );
282                 }
283             }
284         }
285     }
286 
287     //-------------------------------------------------------------------------
288     sal_Bool lcl_getHomeDirectory( const String& _rForURL, String& /* [out] */ _rHomeDir )
289     {
290         _rHomeDir.Erase();
291 
292         // now ask the content broker for a provider for this scheme
293         //=================================================================
294         try
295         {
296             // get the content provider manager
297             ::ucbhelper::ContentBroker* pBroker = ::ucbhelper::ContentBroker::get();
298             Reference< XContentProviderManager > xProviderManager;
299             if ( pBroker )
300                 xProviderManager = pBroker->getContentProviderManagerInterface();
301 
302             //=================================================================
303             // get the provider for the current scheme
304             Reference< XContentProvider > xProvider;
305             if ( xProviderManager.is() )
306                 xProvider = xProviderManager->queryContentProvider( _rForURL );
307 
308             DBG_ASSERT( xProvider.is(), "lcl_getHomeDirectory: could not find a (valid) content provider for the current URL!" );
309             Reference< XPropertySet > xProviderProps( xProvider, UNO_QUERY );
310             if ( xProviderProps.is() )
311             {
312                 Reference< XPropertySetInfo > xPropInfo = xProviderProps->getPropertySetInfo();
313                 const ::rtl::OUString sHomeDirPropertyName( RTL_CONSTASCII_USTRINGPARAM( "HomeDirectory" ) );
314                 if ( !xPropInfo.is() || xPropInfo->hasPropertyByName( sHomeDirPropertyName ) )
315                 {
316                     ::rtl::OUString sHomeDirectory;
317                     xProviderProps->getPropertyValue( sHomeDirPropertyName ) >>= sHomeDirectory;
318                     _rHomeDir = sHomeDirectory;
319                 }
320             }
321         }
322         catch( const Exception& )
323         {
324             DBG_ERROR( "lcl_getHomeDirectory: caught an exception!" );
325         }
326         return 0 < _rHomeDir.Len();
327     }
328 
329     //---------------------------------------------------------------------
330     static String lcl_ensureFinalSlash( const String& _rDir )
331     {
332         INetURLObject aWorkPathObj( _rDir, INET_PROT_FILE );
333         aWorkPathObj.setFinalSlash();
334         return  aWorkPathObj.GetMainURL( INetURLObject::NO_DECODE );
335     }
336 
337     //---------------------------------------------------------------------
338     void    convertStringListToUrls( const String& _rColonSeparatedList, ::std::vector< String >& _rTokens, bool _bFinalSlash )
339     {
340         const sal_Unicode s_cSeparator =
341 #if defined(WNT) || defined(OS2)
342             ';'
343 #else
344             ':'
345 #endif
346             ;
347         xub_StrLen nTokens = _rColonSeparatedList.GetTokenCount( s_cSeparator );
348         _rTokens.resize( 0 ); _rTokens.reserve( nTokens );
349         for ( xub_StrLen i=0; i<nTokens; ++i )
350         {
351             // the current token in the list
352             String sCurrentToken = _rColonSeparatedList.GetToken( i, s_cSeparator );
353             if ( !sCurrentToken.Len() )
354                 continue;
355 
356             INetURLObject aCurrentURL;
357 
358             String sURL;
359             if ( ::utl::LocalFileHelper::ConvertPhysicalNameToURL( sCurrentToken, sURL ) )
360                 aCurrentURL = INetURLObject( sURL );
361             else
362             {
363                 // smart URL parsing, assuming FILE protocol
364                 aCurrentURL = INetURLObject( sCurrentToken, INET_PROT_FILE );
365             }
366 
367             if ( _bFinalSlash )
368                 aCurrentURL.setFinalSlash( );
369             else
370                 aCurrentURL.removeFinalSlash( );
371             _rTokens.push_back( aCurrentURL.GetMainURL( INetURLObject::NO_DECODE ) );
372         }
373     }
374 
375     //---------------------------------------------------------------------
376     struct RemoveFinalSlash : public ::std::unary_function< String, void >
377     {
378         void operator()( String& _rURL )
379         {
380             INetURLObject aURL( _rURL );
381 #if defined(WNT) || defined(OS2)
382             if ( aURL.getSegmentCount() > 1 )
383 #endif
384                 aURL.removeFinalSlash( );
385             _rURL = aURL.GetMainURL( INetURLObject::NO_DECODE );
386         }
387     };
388 
389     // -----------------------------------------------------------------------
390     /** retrieves the value of an environment variable
391         @return <TRUE/> if and only if the retrieved string value is not empty
392     */
393     bool getEnvironmentValue( const sal_Char* _pAsciiEnvName, ::rtl::OUString& _rValue )
394     {
395         _rValue = ::rtl::OUString();
396         ::rtl::OUString sEnvName = ::rtl::OUString::createFromAscii( _pAsciiEnvName );
397         osl_getEnvironment( sEnvName.pData, &_rValue.pData );
398         return _rValue.getLength() != 0;
399     }
400 }
401 
402 //***************************************************************************
403 // ControlChain_Impl
404 //***************************************************************************
405 
406 struct ControlChain_Impl
407 {
408     Window*            _pControl;
409     ControlChain_Impl* _pNext;
410     sal_Bool               _bHasOwnerShip;
411 
412     ControlChain_Impl( Window* pControl, ControlChain_Impl* pNext );
413     ~ControlChain_Impl();
414 };
415 
416 //***************************************************************************
417 
418 ControlChain_Impl::ControlChain_Impl
419 (
420     Window* pControl,
421     ControlChain_Impl* pNext
422 )
423     : _pControl( pControl ),
424       _pNext( pNext ),
425       _bHasOwnerShip( sal_True )
426 {
427 }
428 
429 //***************************************************************************
430 
431 ControlChain_Impl::~ControlChain_Impl()
432 {
433     if ( _bHasOwnerShip )
434     {
435         delete _pControl;
436     }
437     delete _pNext;
438 }
439 
440 //*****************************************************************************
441 // ResMgrHolder
442 //*****************************************************************************
443 namespace
444 {
445     struct ResMgrHolder
446     {
447         ResMgr * operator ()()
448         {
449             return ResMgr::CreateResMgr (CREATEVERSIONRESMGR_NAME(fps_office));
450         }
451 
452         static ResMgr * getOrCreate()
453         {
454             return rtl_Instance<
455                 ResMgr, ResMgrHolder,
456                 osl::MutexGuard, osl::GetGlobalMutex >::create (
457                     ResMgrHolder(), osl::GetGlobalMutex());
458         }
459     };
460 
461     struct SvtResId : public ResId
462     {
463         SvtResId (sal_uInt16 nId) : ResId (nId, *ResMgrHolder::getOrCreate()) {}
464     };
465 }
466 
467 //*****************************************************************************
468 // SvtFileDialog
469 //*****************************************************************************
470 SvtFileDialog::SvtFileDialog
471 (
472     Window* _pParent,
473     WinBits nBits,
474     WinBits nExtraBits
475 ) :
476     ModalDialog( _pParent, SvtResId( DLG_SVT_EXPLORERFILE ) )
477 
478     ,_pUserControls( NULL )
479     ,_pCbReadOnly( NULL )
480     ,_pCbLinkBox( NULL)
481     ,_pCbPreviewBox( NULL )
482     ,_pCbSelection( NULL )
483     ,_pPbPlay( NULL )
484     ,_pPrevWin( NULL )
485     ,_pPrevBmp( NULL )
486     ,_pFileView( NULL )
487     ,_pFileNotifier( NULL )
488     ,_pImp( new SvtExpFileDlg_Impl( nBits ) )
489     ,_nExtraBits( nExtraBits )
490     ,_bIsInExecute( sal_False )
491     ,m_bInExecuteAsync( false )
492     ,m_bHasFilename( false )
493 {
494     Init_Impl( nBits );
495 }
496 
497 //*****************************************************************************
498 
499 SvtFileDialog::SvtFileDialog ( Window* _pParent, WinBits nBits )
500     :ModalDialog( _pParent, SvtResId( DLG_SVT_EXPLORERFILE ) )
501     ,_pUserControls( NULL )
502     ,_pCbReadOnly( NULL )
503     ,_pCbLinkBox( NULL)
504     ,_pCbPreviewBox( NULL )
505     ,_pCbSelection( NULL )
506     ,_pPbPlay( NULL )
507     ,_pPrevWin( NULL )
508     ,_pPrevBmp( NULL )
509     ,_pFileView( NULL )
510     ,_pFileNotifier( NULL )
511     ,_pImp( new SvtExpFileDlg_Impl( nBits ) )
512     ,_nExtraBits( 0L )
513     ,_bIsInExecute( sal_False )
514     ,m_bHasFilename( false )
515 {
516     Init_Impl( nBits );
517 }
518 
519 //*****************************************************************************
520 
521 SvtFileDialog::~SvtFileDialog()
522 {
523     if ( _pImp->_aIniKey.Len() )
524     {
525         // save window state
526         SvtViewOptions aDlgOpt( E_DIALOG, _pImp->_aIniKey );
527         aDlgOpt.SetWindowState( String( GetWindowState(), osl_getThreadTextEncoding() ) );
528         String sUserData = _pFileView->GetConfigString();
529         aDlgOpt.SetUserItem( ::rtl::OUString::createFromAscii( "UserData" ),
530                              makeAny( ::rtl::OUString( sUserData ) ) );
531     }
532 
533     _pFileView->SetSelectHdl( Link() );
534 
535     delete _pImp;
536     delete _pFileView;
537 
538     delete _pCbReadOnly;
539     delete _pCbLinkBox;
540     delete _pCbPreviewBox;
541     delete _pCbSelection;
542     delete _pPbPlay;
543     delete _pPrevWin;
544     delete _pPrevBmp;
545 
546     delete _pUserControls;
547 }
548 
549 //*****************************************************************************
550 
551 void SvtFileDialog::Init_Impl
552 (
553     WinBits nStyle
554 )
555 {
556     sal_Bool bIsHighContrast = GetSettings().GetStyleSettings().GetHighContrastMode();
557     m_aImages = ImageList( SvtResId( bIsHighContrast ? RID_FILEPICKER_IMAGES_HC : RID_FILEPICKER_IMAGES ) );
558 
559     _pImp->_nStyle = nStyle;
560     _pImp->_a6Size = LogicToPixel( Size( 6, 6 ), MAP_APPFONT );
561     _pImp->_eMode = ( nStyle & WB_SAVEAS ) ? FILEDLG_MODE_SAVE : FILEDLG_MODE_OPEN;
562     _pImp->_eDlgType = FILEDLG_TYPE_FILEDLG;
563 
564     if ( ( nStyle & SFXWB_PATHDIALOG ) == SFXWB_PATHDIALOG )
565         _pImp->_eDlgType = FILEDLG_TYPE_PATHDLG;
566 
567     // Set the directory for the "back to the default dir" button
568     INetURLObject aStdDirObj( SvtPathOptions().GetWorkPath() );
569     SetStandardDir( aStdDirObj.GetMainURL( INetURLObject::NO_DECODE ) );
570 
571     // Reichweite bestimmen.
572     if ( !( nStyle & SFXWB_NOREMOTE ) )
573     {
574         _pImp->_nState |= FILEDLG_STATE_REMOTE;
575     }
576 
577     // Kontrollelement erzeugen, wobei die Reihenfolge die Tab-Steuerung
578     // bestimmt.
579     _pImp->_pFtFileName = new FixedText( this, SvtResId( FT_EXPLORERFILE_FILENAME ) );
580 
581     SvtURLBox* pURLBox = new SvtURLBox( this );
582     pURLBox->SetUrlFilter( &m_aURLFilter );
583     _pImp->_pEdFileName = pURLBox;
584 
585     Edit aDummy( this, SvtResId( ED_EXPLORERFILE_FILENAME ) );
586     _pImp->_pEdFileName->SetPosSizePixel( aDummy.GetPosPixel(), aDummy.GetSizePixel() );
587     _pImp->_pEdFileName->Show();
588     pURLBox->SetSelectHdl( LINK( this, SvtFileDialog, EntrySelectHdl_Impl ) );
589     pURLBox->SetOpenHdl( STATIC_LINK( this, SvtFileDialog, OpenHdl_Impl ) );
590 
591     // in folder picker mode, only auto-complete directories (no files)
592     bool bIsFolderPicker = ( _pImp->_eDlgType == FILEDLG_TYPE_PATHDLG );
593     pURLBox->SetOnlyDirectories( bIsFolderPicker );
594 
595     // in save mode, don't use the autocompletion as selection in the edit part
596     bool bSaveMode = ( FILEDLG_MODE_SAVE == _pImp->_eMode );
597     pURLBox->SetNoURLSelection( bSaveMode );
598 
599     _pImp->_pEdFileName->SetHelpId( HID_FILEDLG_AUTOCOMPLETEBOX );
600 
601     _pImp->_pFtFileType = new FixedText( this, SvtResId( FT_EXPLORERFILE_FILETYPE ) );
602     _pImp->CreateFilterListControl( this, SvtResId( LB_EXPLORERFILE_FILETYPE ) );
603 
604     // move the filter listbox to the space occupied by the version listbox
605     // if that box isn't needed
606     if ( !( _nExtraBits & SFX_EXTRA_SHOWVERSIONS ) &&
607          !( _nExtraBits & SFX_EXTRA_TEMPLATES ) &&
608          !( _nExtraBits & SFX_EXTRA_IMAGE_TEMPLATE ) )
609     {
610         {
611             FixedText aSharedListBoxLabel( this, SvtResId( FT_EXPLORERFILE_SHARED_LISTBOX ) );
612             _pImp->_pFtFileType->SetPosPixel( aSharedListBoxLabel.GetPosPixel() );
613         }
614 
615         {
616             ListBox aSharedListBox( this, SvtResId( LB_EXPLORERFILE_SHARED_LISTBOX ) );
617             _pImp->GetFilterListControl()->SetPosPixel( aSharedListBox.GetPosPixel() );
618         }
619     }
620 
621     _pImp->_pFtCurrentPath = new FixedText( this, SvtResId( FT_EXPLORERFILE_CURRENTPATH ) );
622     WinBits nTmpStyle = _pImp->_pFtCurrentPath->GetStyle();
623     nTmpStyle |= WB_PATHELLIPSIS;
624     _pImp->_pFtCurrentPath->SetStyle( nTmpStyle );
625 
626     _pImp->_pBtnFileOpen = new PushButton( this, SvtResId( BTN_EXPLORERFILE_OPEN ) );
627     _pImp->_pBtnCancel = new CancelButton( this, SvtResId( BTN_EXPLORERFILE_CANCEL ) );
628     _pImp->_pBtnHelp = new HelpButton( this, SvtResId( BTN_EXPLORERFILE_HELP ) );
629 
630     _pImp->_pBtnUp = new SvtUpButton_Impl( this, SvtResId( BTN_EXPLORERFILE_UP ) );
631     _pImp->_pBtnNewFolder = new ImageButton( this, SvtResId( BTN_EXPLORERFILE_NEWFOLDER ) );
632     _pImp->_pBtnNewFolder->SetStyle( _pImp->_pBtnNewFolder->GetStyle() | WB_NOPOINTERFOCUS );
633     _pImp->_pBtnStandard = new SvtTravelButton_Impl( this, SvtResId( BTN_EXPLORERFILE_STANDARD ) );
634 
635     _pImp->_pBtnUp->SetAccessibleName( _pImp->_pBtnUp->GetQuickHelpText() );
636     _pImp->_pBtnNewFolder->SetAccessibleName( _pImp->_pBtnNewFolder->GetQuickHelpText() );
637     _pImp->_pBtnStandard->SetAccessibleName( _pImp->_pBtnStandard->GetQuickHelpText() );
638 
639     if ( ( nStyle & SFXWB_MULTISELECTION ) == SFXWB_MULTISELECTION )
640         _pImp->_bMultiSelection = sal_True;
641 
642     _pFileView = new SvtFileView( this, SvtResId( CTL_EXPLORERFILE_FILELIST ),
643                                        FILEDLG_TYPE_PATHDLG == _pImp->_eDlgType,
644                                        _pImp->_bMultiSelection );
645     _pFileView->SetUrlFilter( &m_aURLFilter );
646     _pFileView->EnableAutoResize();
647 
648     _pFileView->SetHelpId( HID_FILEDLG_STANDARD );
649     _pFileView->SetStyle( _pFileView->GetStyle() | WB_TABSTOP );
650 
651     // Positionen und Groessen der Knoepfe bestimmen.
652     Image aNewFolderImg( GetButtonImage( IMG_FILEDLG_CREATEFOLDER ) );
653     _pImp->_pBtnNewFolder->SetModeImage( aNewFolderImg );
654 
655     Size aSize( aNewFolderImg.GetSizePixel() );
656     aSize.Width() += FILEDIALOG_DEF_IMAGEBORDER;
657     aSize.Height() += FILEDIALOG_DEF_IMAGEBORDER;
658     _pImp->_pBtnNewFolder->SetSizePixel( aSize );
659     _pImp->_pBtnUp->SetSizePixel( aSize );
660     _pImp->_pBtnStandard->SetSizePixel( aSize );
661 
662     Size aDlgSize = GetOutputSizePixel();
663     long n6AppFontInPixel =
664             LogicToPixel( Size( 6, 0 ), MAP_APPFONT ).Width();
665     long n3AppFontInPixel =
666             LogicToPixel( Size( 3, 0 ), MAP_APPFONT ).Width();
667 
668     // calculate the length of all buttons
669     const sal_uInt16 nBtnCount = 3; // "previous level", "new folder" and "standard dir"
670     long nDelta = n6AppFontInPixel; // right border
671     nDelta += ( nBtnCount * aSize.Width() ); // button count * button width
672     nDelta += ( n3AppFontInPixel + n3AppFontInPixel / 2 ); // spacing 1*big 1*small
673 
674     Point aPos(
675         aDlgSize.Width() - nDelta,
676         _pImp->_pBtnUp->GetPosPixel().Y()
677     );
678     Size aCurPathSize(
679         aPos.X() - n6AppFontInPixel,
680         _pImp->_pFtCurrentPath->GetOutputSizePixel().Height()
681     );
682     _pImp->_pFtCurrentPath->SetOutputSizePixel( aCurPathSize );
683     _pImp->_pBtnUp->SetPosPixel( aPos );
684     aPos.X() += aSize.Width();
685     aPos.X() += n3AppFontInPixel;
686     _pImp->_pBtnNewFolder->SetPosPixel( aPos );
687     aPos.X() += aSize.Width();
688     aPos.X() += n3AppFontInPixel / 2;
689     _pImp->_pBtnStandard->SetPosPixel( aPos );
690     nDelta = aSize.Height();
691     nDelta -= aCurPathSize.Height();
692     nDelta /= 2;
693     Point aCurPathPos = _pImp->_pFtCurrentPath->GetPosPixel();
694     aCurPathPos.Y() += nDelta;
695     _pImp->_pFtCurrentPath->SetPosPixel( aCurPathPos );
696 
697     if ( nStyle & SFXWB_READONLY )
698     {
699         _pCbReadOnly = new CheckBox( this, SvtResId( CB_EXPLORERFILE_READONLY ) );
700         _pCbReadOnly->SetHelpId( HID_FILEOPEN_READONLY );
701         _pCbReadOnly->SetText( SvtResId( STR_SVT_FILEPICKER_READONLY ) );
702         AddControl( _pCbReadOnly );
703         ReleaseOwnerShip( _pCbReadOnly );
704         _pCbReadOnly->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
705     }
706 
707     if ( nStyle & SFXWB_PASSWORD )
708     {
709         _pImp->_pCbPassword = new CheckBox( this, SvtResId( CB_EXPLORERFILE_PASSWORD ) );
710         _pImp->_pCbPassword->SetText( SvtResId( STR_SVT_FILEPICKER_PASSWORD ) );
711         AddControl( _pImp->_pCbPassword );
712         ReleaseOwnerShip( _pImp->_pCbPassword );
713         _pImp->_pCbPassword->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
714     }
715 
716     // set the ini file for extracting the size
717     _pImp->_aIniKey = IODLG_CONFIGNAME;
718 
719     AddControls_Impl( );
720 
721     // Zahl der Pixel bestimmen, um die die anderen Elemente in der Position
722     // Angepasst werden muessen.
723     aPos.Y() += aSize.Height();
724     aPos.Y() += LogicToPixel( Size( 0, 6 ), MAP_APPFONT ).Height();
725     long nYOffset = aPos.Y();
726     aPos = _pFileView->GetPosPixel();
727     nYOffset -= aPos.Y();
728 
729     // Positionen der uebrigen Elemente anpassen.
730     aPos.Y() += nYOffset;
731     _pFileView->SetPosPixel( aPos );
732 
733     lcl_MoveControl( _pImp->_pFtFileName, 0, nYOffset );
734     lcl_MoveControl( _pImp->_pEdFileName, 0, nYOffset );
735 
736     lcl_MoveControl( _pImp->_pFtFileVersion, 0, nYOffset );
737     lcl_MoveControl( _pImp->_pLbFileVersion, 0, nYOffset );
738 
739     lcl_MoveControl( _pImp->_pFtTemplates, 0, nYOffset );
740     lcl_MoveControl( _pImp->_pLbTemplates, 0, nYOffset );
741 
742     lcl_MoveControl( _pImp->_pFtImageTemplates, 0, nYOffset );
743     lcl_MoveControl( _pImp->_pLbImageTemplates, 0, nYOffset );
744 
745     lcl_MoveControl( _pImp->_pFtFileType, 0, nYOffset );
746     lcl_MoveControl( _pImp->GetFilterListControl(), 0, nYOffset );
747 
748     lcl_MoveControl( _pImp->_pBtnFileOpen, 0, nYOffset );
749     lcl_MoveControl( _pImp->_pBtnCancel, 0, nYOffset );
750 
751     lcl_MoveControl( _pImp->_pBtnHelp, 0, nYOffset + 3 );
752         // a little more spacing between Cancel- and HelpButton
753 
754     // Groesse des Dialoges anpassen.
755     aSize = GetSizePixel();
756     aSize.Height() += nYOffset;
757     SetSizePixel( aSize );
758 
759     // Beschriftungen dem Modus anpassen.
760     sal_uInt16 nResId = STR_EXPLORERFILE_OPEN;
761     sal_uInt16 nButtonResId = 0;
762 
763     if ( nStyle & WB_SAVEAS )
764     {
765         nResId = STR_EXPLORERFILE_SAVE;
766         nButtonResId = STR_EXPLORERFILE_BUTTONSAVE;
767     }
768 
769     if ( ( nStyle & SFXWB_PATHDIALOG ) == SFXWB_PATHDIALOG )
770     {
771         _pImp->_pFtFileName->SetText( SvtResId( STR_PATHNAME ) );
772         nResId = STR_PATHSELECT;
773         nButtonResId = STR_BUTTONSELECT;
774     }
775 
776     SetText( SvtResId( nResId ) );
777 
778     if ( nButtonResId )
779         _pImp->_pBtnFileOpen->SetText( SvtResId( nButtonResId ) );
780 
781     if ( FILEDLG_TYPE_FILEDLG != _pImp->_eDlgType )
782     {
783         _pImp->_pFtFileType->Hide();
784         _pImp->GetFilterListControl()->Hide();
785     }
786 
787     // Einstellungen der Steuerelemente vornehmen.
788     _pImp->_pBtnNewFolder->SetClickHdl( STATIC_LINK( this, SvtFileDialog, NewFolderHdl_Impl ) );
789     _pImp->_pBtnFileOpen->SetClickHdl( STATIC_LINK( this, SvtFileDialog, OpenHdl_Impl ) );
790     _pImp->_pBtnCancel->SetClickHdl( LINK( this, SvtFileDialog, CancelHdl_Impl ) );
791     _pImp->SetFilterListSelectHdl( STATIC_LINK( this, SvtFileDialog, FilterSelectHdl_Impl ) );
792     _pImp->_pEdFileName->SetGetFocusHdl( STATIC_LINK( this, SvtFileDialog, FileNameGetFocusHdl_Impl ) );
793     _pImp->_pEdFileName->SetModifyHdl( STATIC_LINK( this, SvtFileDialog, FileNameModifiedHdl_Impl ) );
794     _pFileView->SetSelectHdl( LINK( this, SvtFileDialog, SelectHdl_Impl ) );
795     _pFileView->SetDoubleClickHdl( LINK( this, SvtFileDialog, DblClickHdl_Impl ) );
796     _pFileView->SetOpenDoneHdl( LINK( this, SvtFileDialog, OpenDoneHdl_Impl ) );
797 
798     // Resourcen freigeben.
799     FreeResource();
800 
801     // Timer fuer Filterbox Travel setzen
802     _pImp->_aFilterTimer.SetTimeout( TRAVELFILTER_TIMEOUT );
803     _pImp->_aFilterTimer.SetTimeoutHdl( STATIC_LINK( this, SvtFileDialog, FilterSelectHdl_Impl ) );
804 
805     if ( WB_SAVEAS & nStyle )
806     {
807         // different help ids if in save-as mode
808         // 90744 - 09.08.2001 - frank.schoenheit@sun.com
809         SetHelpId( HID_FILESAVE_DIALOG );
810 
811         _pImp->_pEdFileName->SetHelpId( HID_FILESAVE_FILEURL );
812         _pImp->_pBtnFileOpen->SetHelpId( HID_FILESAVE_DOSAVE );
813         _pImp->_pBtnNewFolder->SetHelpId( HID_FILESAVE_CREATEDIRECTORY );
814         _pImp->_pBtnStandard->SetHelpId( HID_FILESAVE_DEFAULTDIRECTORY );
815         _pImp->_pBtnUp->SetHelpId( HID_FILESAVE_LEVELUP );
816         _pImp->GetFilterListControl()->SetHelpId( HID_FILESAVE_FILETYPE );
817         _pFileView->SetHelpId( HID_FILESAVE_FILEVIEW );
818 
819         // formerly, there was only _pLbFileVersion, which was used for 3 different
820         // use cases. For reasons of maintainability, I introduced extra members (_pLbTemplates, _pLbImageTemplates)
821         // for the extra use cases, and separated _pLbFileVersion
822         // I did not find out in which cases the help ID is really needed HID_FILESAVE_TEMPLATE - all
823         // tests I made lead to a dialog where _no_ of the three list boxes was present.
824         // 96930 - 15.08.2002 - fs@openoffice.org
825         if ( _pImp->_pLbFileVersion )
826             _pImp->_pLbFileVersion->SetHelpId( HID_FILESAVE_TEMPLATE );
827         if ( _pImp->_pLbTemplates )
828             _pImp->_pLbTemplates->SetHelpId( HID_FILESAVE_TEMPLATE );
829         if ( _pImp->_pLbImageTemplates )
830             _pImp->_pLbImageTemplates->SetHelpId( HID_FILESAVE_TEMPLATE );
831 
832         if ( _pImp->_pCbPassword ) _pImp->_pCbPassword->SetHelpId( HID_FILESAVE_SAVEWITHPASSWORD );
833         if ( _pImp->_pCbAutoExtension ) _pImp->_pCbAutoExtension->SetHelpId( HID_FILESAVE_AUTOEXTENSION );
834         if ( _pImp->_pCbOptions ) _pImp->_pCbOptions->SetHelpId( HID_FILESAVE_CUSTOMIZEFILTER );
835         if ( _pCbSelection ) _pCbSelection->SetHelpId( HID_FILESAVE_SELECTION );
836     }
837 
838     // correct the z-order of the controls
839     implArrangeControls();
840 
841     // special URLs, such as favourites and "restricted" paths
842     implInitializeSpecialURLLists( );
843 
844     /// read our settings from the configuration
845     m_aConfiguration = OConfigurationTreeRoot::createWithServiceFactory(
846         ::comphelper::getProcessServiceFactory(),
847         ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "/org.openoffice.Office.UI/FilePicker" ) )
848     );
849 }
850 
851 //*****************************************************************************
852 
853 IMPL_STATIC_LINK( SvtFileDialog, NewFolderHdl_Impl, PushButton*, EMPTYARG )
854 {
855     pThis->_pFileView->EndInplaceEditing( false );
856 
857     INetURLObject aObj( pThis->_pFileView->GetViewURL() );
858     String sFolderName = aObj.getName( INetURLObject::LAST_SEGMENT, true, INetURLObject::DECODE_WITH_CHARSET, RTL_TEXTENCODING_UTF8 );
859     svtools::QueryFolderNameDialog aDlg( pThis, sFolderName, String( SvtResId( STR_SVT_NEW_FOLDER ) ) );
860     sal_Bool bHandled = sal_False;
861 
862     while ( !bHandled )
863     {
864         if ( aDlg.Execute() == RET_OK )
865             bHandled = pThis->_pFileView->CreateNewFolder( aDlg.GetName() );
866         else
867             bHandled = sal_True;
868     }
869 
870     return 0;
871 }
872 
873 //*****************************************************************************
874 
875 IMPL_STATIC_LINK_NOINSTANCE( SvtFileDialog, ViewHdl_Impl, ImageButton*, EMPTYARG )
876 {
877     return 0;
878 }
879 
880 //*****************************************************************************
881 //-----------------------------------------------------------------------------
882 sal_Bool SvtFileDialog::createNewUserFilter( const String& _rNewFilter, sal_Bool _bAllowUserDefExt )
883 {
884     // delete the old user filter and create a new one
885     DELETEZ( _pImp->_pUserFilter );
886     _pImp->_pUserFilter = new SvtFileDialogFilter_Impl( _rNewFilter, _rNewFilter );
887 
888     // remember the extension
889     sal_Bool bIsAllFiles = _rNewFilter.EqualsAscii( FILEDIALOG_FILTER_ALL );
890     if ( bIsAllFiles )
891         EraseDefaultExt();
892     else
893         SetDefaultExt( _rNewFilter.Copy( 2 ) );
894         // TODO: this is nonsense. In the whole file there are a lotta places where we assume that a user filter
895         // is always "*.<something>". But changing this would take some more time than I have now ...
896         // 05.12.2001 - 95486 - fs@openoffice.org
897 
898     // now, the default extension is set to the one of the user filter (or empty)
899     // if the former is not allowed (_bAllowUserDefExt = <FALSE/>), we have to use the ext of the current filter
900     // (if possible)
901     sal_Bool bUseCurFilterExt = sal_True;
902     String sUserFilter = _pImp->_pUserFilter->GetType();
903     xub_StrLen nSepPos = sUserFilter.SearchBackward( '.' );
904     if ( STRING_NOTFOUND != nSepPos )
905     {
906         String sUserExt = sUserFilter.Copy( nSepPos + 1 );
907         if  (   ( STRING_NOTFOUND == sUserExt.Search( '*' ) )
908             &&  ( STRING_NOTFOUND == sUserExt.Search( '?' ) )
909             )
910             bUseCurFilterExt = sal_False;
911     }
912 
913     if ( !_bAllowUserDefExt || bUseCurFilterExt )
914     {
915         if ( _pImp->GetCurFilter( ) )
916             SetDefaultExt( _pImp->GetCurFilter( )->GetExtension() );
917         else
918             EraseDefaultExt();
919     }
920 
921     // outta here
922     return bIsAllFiles;
923 }
924 
925 //-----------------------------------------------------------------------------
926 #define FLT_NONEMPTY        0x0001
927 #define FLT_CHANGED         0x0002
928 #define FLT_USERFILTER      0x0004
929 #define FLT_ALLFILESFILTER  0x0008
930 
931 //-----------------------------------------------------------------------------
932 sal_uInt16 SvtFileDialog::adjustFilter( const String& _rFilter )
933 {
934     sal_uInt16 nReturn = 0;
935 
936     const sal_Bool bNonEmpty = ( _rFilter.Len() != 0 );
937     if ( bNonEmpty )
938     {
939         nReturn |= FLT_NONEMPTY;
940 
941         sal_Bool bFilterChanged = sal_True;
942 
943         // search for a corresponding filter
944         SvtFileDialogFilter_Impl* pFilter = FindFilter_Impl( _rFilter, sal_False, bFilterChanged );
945 
946 #ifdef AUTOSELECT_USERFILTER
947         // if we found a filter which without allowing multi-extensions -> select it
948         if ( pFilter )
949         {
950             _pImp->SelectFilterListEntry( pFilter->GetName() );
951             _pImp->SetCurFilter( pFilter );
952         }
953 #endif // AUTOSELECT_USERFILTER
954 
955         // look for multi-ext filters if necessary
956         if ( !pFilter )
957             pFilter = FindFilter_Impl( _rFilter, sal_True, bFilterChanged );
958 
959         if ( bFilterChanged )
960             nReturn |= FLT_CHANGED;
961 
962         if ( !pFilter )
963         {
964             nReturn |= FLT_USERFILTER;
965             // no filter found : use it as user defined filter
966 #ifdef AUTOSELECT_USERFILTER
967             if ( createNewUserFilter( _rFilter, sal_True ) )
968 #else
969             if ( createNewUserFilter( _rFilter, sal_False ) )
970 #endif
971             {   // it's the "all files" filter
972                 nReturn |= FLT_ALLFILESFILTER;
973 
974 #ifdef AUTOSELECT_USERFILTER
975                 // select the "all files" entry
976                 String sAllFilesFilter( SvtResId( STR_FILTERNAME_ALL ) );
977                 if ( _pImp->HasFilterListEntry( sAllFilesFilter ) )
978                 {
979                     _pImp->SelectFilterListEntry( sAllFilesFilter );
980                     _pImp->SetCurFilter( _pImp->GetSelectedFilterEntry( sAllFilesFilter ) );
981                 }
982                 else
983                     _pImp->SetNoFilterListSelection( ); // there is no "all files" entry
984 #endif // AUTOSELECT_USERFILTER
985             }
986 #ifdef AUTOSELECT_USERFILTER
987             else
988                 _pImp->SetNoFilterListSelection( );
989 #endif // AUTOSELECT_USERFILTER
990         }
991     }
992 
993     return nReturn;
994 }
995 
996 //-----------------------------------------------------------------------------
997 IMPL_LINK( SvtFileDialog, CancelHdl_Impl, void*, EMPTYARG )
998 {
999     if ( m_pCurrentAsyncAction.is() )
1000     {
1001         m_pCurrentAsyncAction->cancel();
1002         onAsyncOperationFinished();
1003     }
1004     else
1005     {
1006         EndDialog( sal_False );
1007     }
1008     return 1L;
1009 }
1010 
1011 //-----------------------------------------------------------------------------
1012 IMPL_STATIC_LINK( SvtFileDialog, OpenHdl_Impl, void*, pVoid )
1013 {
1014     if ( pThis->_pImp->_bMultiSelection && pThis->_pFileView->GetSelectionCount() > 1 )
1015     {
1016         // bei Multiselektion spezielles Open
1017         pThis->OpenMultiSelection_Impl();
1018         return 0;
1019     }
1020 
1021     String aFileName;
1022     String aOldPath( pThis->_pFileView->GetViewURL() );
1023     if ( pThis->_pImp->_bDoubleClick || pThis->_pFileView->HasChildPathFocus() )
1024         // Selection done by doubleclicking in the view, get filename from the view
1025         aFileName = pThis->_pFileView->GetCurrentURL();
1026 
1027     if ( !aFileName.Len() )
1028     {
1029         // if an entry is selected in the view ....
1030         if ( pThis->_pFileView->GetSelectionCount() )
1031         {   // -> use this one. This will allow us to step down this folder
1032             // #i8928# - 2002-12-20 - fs@openoffice.org
1033             aFileName = pThis->_pFileView->GetCurrentURL();
1034         }
1035     }
1036 
1037     if ( !aFileName.Len() )
1038     {
1039         if ( pThis->_pImp->_eMode == FILEDLG_MODE_OPEN && pThis->_pImp->_pEdFileName->IsTravelSelect() )
1040             // OpenHdl called from URLBox; travelling through the list of URLs should not cause an opening
1041             return 0;                   // MBA->PB: seems to be called never ?!
1042 
1043         // get the URL from from the edit field ( if not empty )
1044         if ( pThis->_pImp->_pEdFileName->GetText().Len() )
1045         {
1046             String aText = pThis->_pImp->_pEdFileName->GetText();
1047 
1048             // did we reach the root?
1049             if ( !INetURLObject( aOldPath ).getSegmentCount() )
1050             {
1051                 if ( ( aText.Len() == 2 && aText.EqualsAscii( ".." ) ) ||
1052                      ( aText.Len() == 3 && ( aText.EqualsAscii( "..\\" ) || aText.EqualsAscii( "../" ) ) ) )
1053                     // don't go higher than the root
1054                     return 0;
1055             }
1056 
1057 #if defined( UNX ) || defined( FS_PRIV_DEBUG )
1058             if ( ( 1 == aText.Len() ) && ( '~' == aText.GetBuffer()[0] ) )
1059             {
1060                 // go to the home directory
1061                 if ( lcl_getHomeDirectory( pThis->_pFileView->GetViewURL(), aFileName ) )
1062                     // in case we got a home dir, reset the text of the edit
1063                     pThis->_pImp->_pEdFileName->SetText( String() );
1064             }
1065             if ( !aFileName.Len() )
1066 #endif
1067             {
1068                 // get url from autocomplete edit
1069                 aFileName = pThis->_pImp->_pEdFileName->GetURL();
1070             }
1071         }
1072         else if ( pVoid == pThis->_pImp->_pBtnFileOpen )
1073             // OpenHdl was called for the "Open" Button; if edit field is empty, use selected element in the view
1074             aFileName = pThis->_pFileView->GetCurrentURL();
1075     }
1076 
1077     // MBA->PB: ?!
1078     if ( !aFileName.Len() && pVoid == pThis->_pImp->_pEdFileName && pThis->_pImp->_pUserFilter )
1079     {
1080         DELETEZ( pThis->_pImp->_pUserFilter );
1081         return 0;
1082     }
1083 
1084     sal_uInt16 nLen = aFileName.Len();
1085     if ( !nLen )
1086     {
1087         // if the dialog was opened to select a folder, the last selected folder should be selected
1088         if( pThis->_pImp->_eDlgType == FILEDLG_TYPE_PATHDLG )
1089         {
1090             aFileName = pThis->_pImp->_pFtCurrentPath->GetText();
1091             nLen = aFileName.Len();
1092         }
1093         else
1094             // no file selected !
1095             return 0;
1096     }
1097 
1098     // mark input as selected
1099     pThis->_pImp->_pEdFileName->SetSelection( Selection( 0, nLen ) );
1100 
1101     // if a path with wildcards is given, divide the string into path and wildcards
1102     String aFilter;
1103     if ( !pThis->IsolateFilterFromPath_Impl( aFileName, aFilter ) )
1104         return 0;
1105 
1106     // if a filter was retrieved, there were wildcards !
1107     sal_uInt16 nNewFilterFlags = pThis->adjustFilter( aFilter );
1108     if ( nNewFilterFlags & FLT_CHANGED )
1109     {
1110         // cut off all text before wildcard in edit and select wildcard
1111         pThis->_pImp->_pEdFileName->SetText( aFilter );
1112         pThis->_pImp->_pEdFileName->SetSelection( Selection( 0, aFilter.Len() ) );
1113     }
1114 
1115     {
1116         INetURLObject aFileObject( aFileName );
1117         if ( ( aFileObject.GetProtocol() == INET_PROT_NOT_VALID ) && aFileName.Len() )
1118         {
1119             String sCompleted = SvtURLBox::ParseSmart( aFileName, pThis->_pFileView->GetViewURL(), SvtPathOptions().GetWorkPath() );
1120             if ( sCompleted.Len() )
1121                 aFileName = sCompleted;
1122         }
1123     }
1124 
1125     // Pr"ufen, ob es sich um einen Ordner handelt.
1126     sal_Bool bIsFolder = sal_False;
1127 
1128     // first thing before doing anyhing with the content: Reset it. When the user presses "open" (or "save" or "export",
1129     // for that matter), s/he wants the complete handling, including all possible error messages, even if s/he
1130     // does the same thing for the same content twice, s/he wants both fails to be displayed.
1131     // Without the reset, it could be that the content cached all relevant information, and will not display any
1132     // error messages for the same content a second time ....
1133     pThis->m_aContent.bindTo( ::rtl::OUString( ) );
1134 
1135     // #97148# & #102204# ---------
1136     if ( aFileName.Len() )
1137     {
1138         // Make sure we have own Interaction Handler in place. We do not need
1139         // to intercept interactions here, but to record the fact that there
1140         // was an interaction.
1141         SmartContent::InteractionHandlerType eInterActionHandlerType
1142             = pThis->m_aContent.queryCurrentInteractionHandler();
1143         if ( ( eInterActionHandlerType == SmartContent::IHT_NONE ) ||
1144              ( eInterActionHandlerType == SmartContent::IHT_DEFAULT ) )
1145             pThis->m_aContent.enableOwnInteractionHandler(
1146                 OFilePickerInteractionHandler::E_NOINTERCEPTION );
1147 
1148         bIsFolder = pThis->m_aContent.isFolder( aFileName );
1149 
1150         // access denied to the given resource - and interaction was already
1151         // used => break following operations
1152         OFilePickerInteractionHandler* pHandler
1153             = pThis->m_aContent.getOwnInteractionHandler();
1154 
1155         OSL_ENSURE( pHandler, "Got no Interaction Handler!!!" );
1156 
1157         if ( pHandler->wasAccessDenied() )
1158             return 0;
1159 
1160         if ( pThis->m_aContent.isInvalid() &&
1161              ( pThis->_pImp->_eMode == FILEDLG_MODE_OPEN ) )
1162         {
1163             if ( !pHandler->wasUsed() )
1164                 ErrorHandler::HandleError( ERRCODE_IO_NOTEXISTS );
1165 
1166             return 0;
1167         }
1168 
1169         // restore previous Interaction Handler
1170         if ( eInterActionHandlerType == SmartContent::IHT_NONE )
1171             pThis->m_aContent.disableInteractionHandler();
1172         else if ( eInterActionHandlerType == SmartContent::IHT_DEFAULT )
1173             pThis->m_aContent.enableDefaultInteractionHandler();
1174     }
1175 
1176     if  (   !bIsFolder                                      // no existent folder
1177         &&  pThis->_pImp->_pCbAutoExtension                 // auto extension is enabled in general
1178         &&  pThis->_pImp->_pCbAutoExtension->IsChecked()    // auto extension is really to be used
1179         &&  pThis->GetDefaultExt().Len()                    // there is a default extension
1180         &&  pThis->GetDefaultExt() != '*'                   // the default extension is not "all"
1181         && !(   FILEDLG_MODE_SAVE == pThis->_pImp->_eMode       // we're saving a file
1182             &&  pThis->_pFileView->GetSelectionCount()          // there is a selected file in the file view -> it will later on
1183             )                                                   //    (in SvtFileDialog::GetPathList) be taken as file to save to
1184                                                                 // (#114818# - 2004-03-17 - fs@openoffice.org)
1185         && FILEDLG_MODE_OPEN != pThis->_pImp->_eMode // pb: #i83408# don't append extension on open
1186         )
1187     {
1188         // check extension and append the default extension if necessary
1189         appendDefaultExtension(aFileName,
1190                                pThis->GetDefaultExt(),
1191                                pThis->_pImp->GetCurFilter()->GetType());
1192     }
1193 
1194     sal_Bool bOpenFolder = ( FILEDLG_TYPE_PATHDLG == pThis->_pImp->_eDlgType ) &&
1195                        !pThis->_pImp->_bDoubleClick && pVoid != pThis->_pImp->_pEdFileName;
1196     if ( bIsFolder )
1197     {
1198         if ( bOpenFolder )
1199         {
1200             pThis->_aPath = aFileName;
1201         }
1202         else
1203         {
1204             if ( aFileName != pThis->_pFileView->GetViewURL() )
1205             {
1206                 if ( !pThis->m_aURLFilter.isUrlAllowed( aFileName ) )
1207                 {
1208                     pThis->simulateAccessDenied( aFileName );
1209                     return 0;
1210                 }
1211 
1212                 pThis->OpenURL_Impl( aFileName );
1213             }
1214             else
1215             {
1216                 if ( nNewFilterFlags & FLT_CHANGED )
1217                     pThis->ExecuteFilter();
1218             }
1219 
1220             return 0;
1221         }
1222     }
1223     else if ( !( nNewFilterFlags & FLT_NONEMPTY ) )
1224     {
1225         // Ggf. URL speichern.
1226         pThis->_aPath = aFileName;
1227     }
1228     else
1229     {
1230         // Ggf. neu filtern.
1231         if ( nNewFilterFlags & FLT_CHANGED )
1232             pThis->ExecuteFilter();
1233         return 0;
1234     }
1235 
1236     INetURLObject aFileObj( aFileName );
1237     if ( aFileObj.HasError() )
1238     {
1239         ErrorHandler::HandleError( ERRCODE_IO_GENERAL );
1240         return 0;
1241     }
1242 
1243     // if restrictions for the allowed folders are in place, we need to do a check here
1244     if ( !pThis->m_aURLFilter.isUrlAllowed( aFileObj.GetMainURL( INetURLObject::NO_DECODE ) ) )
1245     {
1246         pThis->simulateAccessDenied( aFileName );
1247         return 0;
1248     }
1249 
1250     switch ( pThis->_pImp->_eMode )
1251     {
1252         case FILEDLG_MODE_SAVE:
1253         {
1254             if ( ::utl::UCBContentHelper::Exists( aFileObj.GetMainURL( INetURLObject::NO_DECODE ) ) )
1255             {
1256                 QueryBox aBox( pThis, WB_YES_NO, SvtResId( STR_SVT_ALREADYEXISTOVERWRITE ) );
1257                 if ( aBox.Execute() != RET_YES )
1258                     return 0;
1259             }
1260             else
1261             {
1262                 String aCurPath;
1263                 if ( ::utl::LocalFileHelper::ConvertURLToSystemPath( aFileName, aCurPath ) )
1264                 {
1265                     // if content does not exist: at least its path must exist
1266                     INetURLObject aPathObj = aFileObj;
1267                     aPathObj.removeSegment();
1268                     // #97148# & #102204# ------------
1269                     sal_Bool bFolder = pThis->m_aContent.isFolder( aPathObj.GetMainURL( INetURLObject::NO_DECODE ) );
1270                     if ( !bFolder )
1271                     {
1272                         ErrorHandler::HandleError( ERRCODE_IO_NOTEXISTSPATH );
1273                         return 0;
1274                     }
1275                 }
1276             }
1277         }
1278         break;
1279 
1280         case FILEDLG_MODE_OPEN:
1281         {
1282             // do an existence check herein, again
1283             // 16.11.2001 - 93107 - frank.schoenheit@sun.com
1284 
1285             if ( INET_PROT_FILE == aFileObj.GetProtocol( ) )
1286             {
1287                 sal_Bool bExists = sal_False;
1288                 // #102204# --------------
1289                 bExists = pThis->m_aContent.is( aFileObj.GetMainURL( INetURLObject::NO_DECODE ) );
1290 
1291 
1292                 if ( !bExists )
1293                 {
1294                     String sError( SvtResId( RID_FILEOPEN_NOTEXISTENTFILE ) );
1295 
1296                     String sInvalidFile( aFileObj.GetMainURL( INetURLObject::DECODE_TO_IURI ) );
1297                     if ( INET_PROT_FILE == aFileObj.GetProtocol() )
1298                     {   // if it's a file URL, transform the URL into system notation
1299                         ::rtl::OUString sURL( sInvalidFile );
1300                         ::rtl::OUString sSystem;
1301                         osl_getSystemPathFromFileURL( sURL.pData, &sSystem.pData );
1302                         sInvalidFile = sSystem;
1303                     }
1304                     sError.SearchAndReplaceAscii( "$name$", sInvalidFile );
1305 
1306                     ErrorBox aError( pThis, WB_OK, sError );
1307                     aError.Execute();
1308                     return 0;
1309                 }
1310             }
1311         }
1312         break;
1313 
1314         default:
1315             DBG_ERROR("SvtFileDialog, OpenHdl_Impl: invalid mode!");
1316     }
1317 
1318     // Interessenten benachrichtigen.
1319     long nRet;
1320 
1321     if ( pThis->_aOKHdl.IsSet() )
1322         nRet = pThis->_aOKHdl.Call( pThis );
1323     else
1324         nRet = pThis->OK();
1325 
1326     if ( nRet )
1327     {
1328         pThis->EndDialog( sal_True );
1329     }
1330 
1331     return nRet;
1332 }
1333 
1334 //*****************************************************************************
1335 
1336 void SvtFileDialog::EnableAutocompletion( sal_Bool _bEnable )
1337 {
1338     _pImp->_pEdFileName->EnableAutocompletion( _bEnable );
1339 }
1340 
1341 //*****************************************************************************
1342 
1343 IMPL_STATIC_LINK( SvtFileDialog, FilterSelectHdl_Impl, ListBox*, pBox )
1344 {
1345     DBG_ASSERT( pBox, "SvtFileDialog:keine Instanz" );
1346 
1347     // wurde der Handler vom Travel-Timer gefeuert?
1348     if ( pBox == (ListBox*)&pThis->_pImp->_aFilterTimer )
1349     {
1350         // Anzeige erneut filtern.
1351         pThis->ExecuteFilter();
1352         return 0;
1353     }
1354 
1355     String sSelectedFilterDisplayName;
1356     SvtFileDialogFilter_Impl* pSelectedFilter = pThis->_pImp->GetSelectedFilterEntry( sSelectedFilterDisplayName );
1357     if ( !pSelectedFilter )
1358     {   // there is no current selection. This happens if for instance the user selects a group separator using
1359         // the keyboard, and then presses enter: When the selection happens, we immediately deselect the entry,
1360         // so in this situation there is no current selection.
1361         if ( restoreCurrentFilter( pThis->_pImp ) )
1362             pThis->ExecuteFilter();
1363     }
1364     else
1365     {
1366         if ( pSelectedFilter->isGroupSeparator() )
1367         {   // group separators can't be selected
1368             // return to the previously selected entry
1369             if ( pThis->_pImp->IsFilterListTravelSelect() )
1370             {
1371                 pThis->_pImp->SetNoFilterListSelection( );
1372 
1373                 // stop the timer for executing the filter
1374                 if ( pThis->_pImp->_aFilterTimer.IsActive() )
1375                     pThis->_pImp->m_bNeedDelayedFilterExecute = sal_True;
1376                 pThis->_pImp->_aFilterTimer.Stop();
1377             }
1378             else
1379             {
1380                 if ( restoreCurrentFilter( pThis->_pImp ) )
1381                     pThis->ExecuteFilter();
1382             }
1383         }
1384         else if (   ( pSelectedFilter != pThis->_pImp->GetCurFilter() )
1385                 ||  pThis->_pImp->_pUserFilter
1386                 )
1387         {
1388             // Store the old filter for the auto extension handling
1389             String sLastFilterExt = pThis->_pImp->GetCurFilter()->GetExtension();
1390             DELETEZ( pThis->_pImp->_pUserFilter );
1391 
1392             // Ggf. Filter des Benutzers entfernen.
1393             pThis->_pImp->SetCurFilter( pSelectedFilter, sSelectedFilterDisplayName );
1394 
1395             // Ggf. Endung anzeigen.
1396             pThis->SetDefaultExt( pSelectedFilter->GetExtension() );
1397             sal_uInt16 nSepPos = pThis->GetDefaultExt().Search( FILEDIALOG_DEF_EXTSEP );
1398 
1399             if ( nSepPos != STRING_NOTFOUND )
1400                 pThis->EraseDefaultExt( nSepPos );
1401 
1402             // update the extension of the current file if necessary
1403             lcl_autoUpdateFileExtension( pThis, sLastFilterExt );
1404 
1405             // wenn der Benutzer schnell durch die Filterbox
1406             // travelt, nicht sofort Filtern
1407             if ( pThis->_pImp->IsFilterListTravelSelect() )
1408             {
1409                 // FilterSelectHdl_Impl soll in
1410                 // TRAVELFILTER_TIMEOUT ms neu gefeuert werden
1411                 pThis->_pImp->_aFilterTimer.Start();
1412             }
1413             else
1414             {
1415                 // evtl. vorher gestarteten Timer stoppen
1416                 pThis->_pImp->_aFilterTimer.Stop();
1417 
1418                 // Anzeige erneut filtern.
1419                 pThis->ExecuteFilter();
1420             }
1421         }
1422     }
1423 
1424     return 0;
1425 }
1426 
1427 //*****************************************************************************
1428 
1429 IMPL_STATIC_LINK( SvtFileDialog, FileNameGetFocusHdl_Impl, void*, EMPTYARG )
1430 {
1431     pThis->_pFileView->SetNoSelection();
1432     pThis->_pFileView->Update();
1433     return 0;
1434 }
1435 
1436 //*****************************************************************************
1437 
1438 IMPL_STATIC_LINK( SvtFileDialog, FileNameModifiedHdl_Impl, void*, EMPTYARG )
1439 {
1440     FileNameGetFocusHdl_Impl( pThis, NULL );
1441     return 0;
1442 }
1443 
1444 //*****************************************************************************
1445 
1446 SvtFileDialogFilter_Impl* SvtFileDialog::FindFilter_Impl
1447 (
1448     const String& _rFilter,
1449     sal_Bool _bMultiExt,/*  sal_True - auch Filter mit mehreren Endungen
1450                             beruecksichtigen
1451                             sal_False - keine ...
1452                         */
1453     sal_Bool& _rFilterChanged
1454 )
1455 
1456 /*  [Beschreibung]
1457 
1458     Die Methode sucht in den eingef"ugten Filtern nach der
1459     spezifizierten Endung.
1460 */
1461 
1462 {
1463     SvtFileDialogFilter_Impl* pFoundFilter = NULL;
1464     SvtFileDialogFilterList_Impl* pList = _pImp->_pFilter;
1465     sal_uInt16 nFilter = pList->Count();
1466 
1467     while ( nFilter-- )
1468     {
1469         SvtFileDialogFilter_Impl* pFilter = pList->GetObject( nFilter );
1470         const String& rType = pFilter->GetType();
1471         String aSingleType = rType;
1472 
1473         if ( _bMultiExt )
1474         {
1475             sal_uInt16 nIdx = 0;
1476             while ( !pFoundFilter && nIdx != STRING_NOTFOUND )
1477             {
1478                 aSingleType = rType.GetToken( 0, FILEDIALOG_DEF_EXTSEP, nIdx );
1479 #ifdef UNX
1480                 if ( aSingleType.CompareTo( _rFilter ) == COMPARE_EQUAL )
1481 #else
1482                 if ( aSingleType.CompareIgnoreCaseToAscii( _rFilter ) == COMPARE_EQUAL )
1483 #endif
1484                     pFoundFilter = pFilter;
1485             }
1486         }
1487 #ifdef UNX
1488         else if ( rType.CompareTo( _rFilter ) == COMPARE_EQUAL )
1489 #else
1490         else if ( rType.CompareIgnoreCaseToAscii( _rFilter ) == COMPARE_EQUAL )
1491 #endif
1492             pFoundFilter = pFilter;
1493 
1494         if ( pFoundFilter )
1495         {
1496             // Filter aktivieren.
1497             _rFilterChanged = _pImp->_pUserFilter || ( _pImp->GetCurFilter() != pFilter );
1498 
1499             createNewUserFilter( _rFilter, sal_False );
1500 
1501             break;
1502         }
1503     }
1504     return pFoundFilter;
1505 }
1506 
1507 //*****************************************************************************
1508 
1509 void SvtFileDialog::ExecuteFilter()
1510 {
1511     _pImp->m_bNeedDelayedFilterExecute = sal_False;
1512     executeAsync( AsyncPickerAction::eExecuteFilter, String(), getMostCurrentFilter( _pImp ) );
1513 }
1514 
1515 //*****************************************************************************
1516 
1517 void SvtFileDialog::OpenMultiSelection_Impl()
1518 
1519 /*  [Beschreibung]
1520 
1521     OpenHandler f"ur MultiSelektion
1522 */
1523 
1524 {
1525     String aPath;
1526     sal_uLong nCount = _pFileView->GetSelectionCount();
1527     SvLBoxEntry* pEntry = nCount ? _pFileView->FirstSelected() : NULL;
1528 
1529     if ( nCount && pEntry )
1530         _aPath = _pFileView->GetURL( pEntry );
1531 
1532     // Interessenten benachrichtigen.
1533     long nRet;
1534 
1535     if ( _aOKHdl.IsSet() )
1536         nRet = _aOKHdl.Call( this );
1537     else
1538         nRet = OK();
1539 
1540     if ( nRet )
1541         EndDialog( sal_True );
1542 }
1543 
1544 //*****************************************************************************
1545 
1546 void SvtFileDialog::UpdateControls( const String& rURL )
1547 {
1548     _pImp->_pEdFileName->SetBaseURL( rURL );
1549 
1550     INetURLObject aObj( rURL );
1551 
1552     //=========================================================================
1553     {
1554         String sText;
1555         DBG_ASSERT( INET_PROT_NOT_VALID != aObj.GetProtocol(), "SvtFileDialog::UpdateControls: Invalid URL!" );
1556 
1557         if ( aObj.getSegmentCount() )
1558         {
1559             ::utl::LocalFileHelper::ConvertURLToSystemPath( rURL, sText );
1560             if ( sText.Len() )
1561             {
1562                 // no Fsys path for server file system ( only UCB has mountpoints! )
1563                 if ( INET_PROT_FILE != aObj.GetProtocol() )
1564                     sText = rURL.Copy( static_cast< sal_uInt16 >(
1565                         INetURLObject::GetScheme( aObj.GetProtocol() ).getLength() ) );
1566             }
1567 
1568             if ( !sText.Len() && aObj.getSegmentCount() )
1569                 sText = rURL;
1570         }
1571 
1572         // path mode ?
1573         if ( FILEDLG_TYPE_PATHDLG == _pImp->_eDlgType )
1574             // -> set new path in the edit field
1575             _pImp->_pEdFileName->SetText( sText );
1576 
1577         // in the "current path" field, truncate the trailing slash
1578         if ( aObj.hasFinalSlash() )
1579         {
1580             aObj.removeFinalSlash();
1581             String sURL( aObj.GetMainURL( INetURLObject::NO_DECODE ) );
1582             if ( !::utl::LocalFileHelper::ConvertURLToSystemPath( sURL, sText ) )
1583                 sText = sURL;
1584         }
1585 
1586         if ( !sText.Len() && rURL.Len() )
1587             // happens, for instance, for URLs which the INetURLObject does not know to belong to a hierarchical scheme
1588             sText = rURL;
1589         _pImp->_pFtCurrentPath->SetText( sText );
1590     }
1591 
1592     //=========================================================================
1593     _aPath = rURL;
1594     if ( _pFileNotifier )
1595         _pFileNotifier->notify( DIRECTORY_CHANGED, 0 );
1596 }
1597 
1598 //*****************************************************************************
1599 
1600 IMPL_LINK( SvtFileDialog, SelectHdl_Impl, SvTabListBox*, pBox )
1601 {
1602     SvLBoxEntry* pEntry = pBox->FirstSelected();
1603     DBG_ASSERT( pEntry, "SelectHandler without selected entry" );
1604     SvtContentEntry* pUserData = (SvtContentEntry*)pEntry->GetUserData();
1605 
1606     if ( pUserData )
1607     {
1608         INetURLObject aObj( pUserData->maURL );
1609         if ( FILEDLG_TYPE_PATHDLG == _pImp->_eDlgType )
1610         {
1611             if ( aObj.GetProtocol() == INET_PROT_FILE )
1612             {
1613                 if ( !pUserData->mbIsFolder )
1614                     aObj.removeSegment();
1615                 String aName = aObj.getFSysPath( (INetURLObject::FSysStyle)(INetURLObject::FSYS_DETECT & ~INetURLObject::FSYS_VOS) );
1616                 _pImp->_pEdFileName->SetText( aName );
1617                 _pImp->_pEdFileName->SetSelection( Selection( 0, aName.Len() ) );
1618                 _aPath = pUserData->maURL;
1619             }
1620             else if ( !pUserData->mbIsFolder )
1621             {
1622                 _pImp->_pEdFileName->SetText( pUserData->maURL );
1623                 _pImp->_pEdFileName->SetSelection( Selection( 0, pUserData->maURL.Len() ) );
1624                 _aPath = pUserData->maURL;
1625             }
1626             else
1627                 _pImp->_pEdFileName->SetText( UniString() );
1628         }
1629         else
1630         {
1631             if ( !pUserData->mbIsFolder )
1632             {
1633                 String aName = pBox->GetEntryText( pEntry, 0 );
1634                 _pImp->_pEdFileName->SetText( aName );
1635                 _pImp->_pEdFileName->SetSelection( Selection( 0, aName.Len() ) );
1636                 _aPath = pUserData->maURL;
1637             }
1638         }
1639     }
1640 
1641     if ( _pImp->_bMultiSelection && _pFileView->GetSelectionCount() > 1 )
1642     {
1643         // bei Multiselektion den Datei-Edit leeren
1644         _pImp->_pEdFileName->SetText( String() );
1645     }
1646 
1647     FileSelect();
1648 
1649     return 0;
1650 }
1651 
1652 //*****************************************************************************
1653 
1654 IMPL_LINK( SvtFileDialog, DblClickHdl_Impl, SvTabListBox*, EMPTYARG )
1655 {
1656     _pImp->_bDoubleClick = sal_True;
1657     OpenHdl_Impl( this, NULL );
1658     _pImp->_bDoubleClick = sal_False;
1659 
1660     return 0;
1661 }
1662 
1663 //*****************************************************************************
1664 
1665 IMPL_LINK( SvtFileDialog, EntrySelectHdl_Impl, ComboBox*, EMPTYARG )
1666 {
1667     FileSelect();
1668 
1669     return 0;
1670 }
1671 
1672 //*****************************************************************************
1673 
1674 IMPL_LINK( SvtFileDialog, OpenDoneHdl_Impl, SvtFileView*, pView )
1675 {
1676     String sCurrentFolder( pView->GetViewURL() );
1677     // check if we can create new folders
1678     EnableControl( _pImp->_pBtnNewFolder, ContentCanMakeFolder( sCurrentFolder ) && m_aURLFilter.isUrlAllowed( sCurrentFolder, false ) );
1679 
1680     // check if we can travel one level up
1681     bool bCanTravelUp = ContentHasParentFolder( pView->GetViewURL() );
1682     if ( bCanTravelUp )
1683     {
1684         // additional check: the parent folder should not be prohibited
1685         INetURLObject aCurrentFolder( sCurrentFolder );
1686         DBG_ASSERT( INET_PROT_NOT_VALID != aCurrentFolder.GetProtocol(),
1687             "SvtFileDialog::OpenDoneHdl_Impl: invalid current URL!" );
1688 
1689         aCurrentFolder.removeSegment();
1690         bCanTravelUp &= m_aURLFilter.isUrlAllowed( aCurrentFolder.GetMainURL( INetURLObject::NO_DECODE ) );
1691     }
1692     EnableControl( _pImp->_pBtnUp, bCanTravelUp );
1693 
1694     return 0;
1695 }
1696 
1697 //*****************************************************************************
1698 
1699 IMPL_LINK( SvtFileDialog, AutoExtensionHdl_Impl, CheckBox*, EMPTYARG )
1700 {
1701     if ( _pFileNotifier )
1702         _pFileNotifier->notify( CTRL_STATE_CHANGED,
1703                                 CHECKBOX_AUTOEXTENSION );
1704 
1705     // update the extension of the current file if necessary
1706     lcl_autoUpdateFileExtension( this, _pImp->GetCurFilter()->GetExtension() );
1707 
1708     return 0;
1709 }
1710 
1711 //*****************************************************************************
1712 
1713 IMPL_LINK( SvtFileDialog, ClickHdl_Impl, CheckBox*, pCheckBox )
1714 {
1715     if ( ! _pFileNotifier )
1716         return 0;
1717 
1718     sal_Int16 nId = -1;
1719 
1720     if ( pCheckBox == _pImp->_pCbOptions )
1721         nId = CHECKBOX_FILTEROPTIONS;
1722     else if ( pCheckBox == _pCbSelection )
1723         nId = CHECKBOX_SELECTION;
1724     else if ( pCheckBox == _pCbReadOnly )
1725         nId = CHECKBOX_READONLY;
1726     else if ( pCheckBox == _pImp->_pCbPassword )
1727         nId = CHECKBOX_PASSWORD;
1728     else if ( pCheckBox == _pCbLinkBox )
1729         nId = CHECKBOX_LINK;
1730     else if ( pCheckBox == _pCbPreviewBox )
1731         nId = CHECKBOX_PREVIEW;
1732 
1733     if ( nId != -1 )
1734         _pFileNotifier->notify( CTRL_STATE_CHANGED, nId );
1735 
1736     return 0;
1737 }
1738 
1739 //*****************************************************************************
1740 
1741 IMPL_LINK( SvtFileDialog, PlayButtonHdl_Impl, PushButton*, EMPTYARG )
1742 {
1743     if ( _pFileNotifier )
1744         _pFileNotifier->notify( CTRL_STATE_CHANGED,
1745                                 PUSHBUTTON_PLAY );
1746 
1747     return 0;
1748 }
1749 
1750 //*****************************************************************************
1751 
1752 long SvtFileDialog::Notify( NotifyEvent& rNEvt )
1753 
1754 /*  [Beschreibung]
1755 
1756     Die Methode wird gerufen, <BACKSPACE> abzufangen.
1757 */
1758 
1759 {
1760     sal_uInt16 nType = rNEvt.GetType();
1761     long nRet = 0;
1762 
1763     if ( EVENT_KEYINPUT == nType && rNEvt.GetKeyEvent() )
1764     {
1765         const KeyCode& rKeyCode = rNEvt.GetKeyEvent()->GetKeyCode();
1766         sal_uInt16 nCode = rKeyCode.GetCode();
1767 
1768         if ( !rKeyCode.GetModifier() &&
1769              KEY_BACKSPACE == nCode && !_pImp->_pEdFileName->HasChildPathFocus() )
1770         {
1771             nRet = 0; //! (long)_pFileView->DoBeamerKeyInput( *rNEvt.GetKeyEvent() );
1772 
1773             if ( !nRet && _pImp->_pBtnUp->IsEnabled() )
1774             {
1775                 PrevLevel_Impl();
1776                 nRet = 1;
1777             }
1778         }
1779 //      else if ( rKeyCode.IsMod1() && ( KEY_C == nCode || KEY_V == nCode || KEY_X == nCode ) )
1780 //      {
1781 /* (mhu)
1782             String aVerb = KEY_C == nCode ? UniString(RTL_CONSTASCII_USTRINGPARAM(SVT_MENUPART_VERB_COPY)) :
1783                 ( KEY_V == nCode ? UniString(RTL_CONSTASCII_USTRINGPARAM(SVT_MENUPART_VERB_PASTE)) : UniString(RTL_CONSTASCII_USTRINGPARAM(SVT_MENUPART_VERB_CUT)) );
1784 //(dv)          if ( !CntPopupMenu::DoVerbCommand( aVerb, _pFileView->GetView() ) )
1785 //(dv)              Sound::Beep();
1786 */
1787 //      }
1788     }
1789     return nRet ? nRet : ModalDialog::Notify( rNEvt );
1790 }
1791 
1792 //*****************************************************************************
1793 
1794 long SvtFileDialog::OK()
1795 {
1796     return sal_True;
1797 }
1798 
1799 //*****************************************************************************
1800 
1801 class SvtDefModalDialogParent_Impl
1802 {
1803 private:
1804     Window* _pOld;
1805 
1806 public:
1807     SvtDefModalDialogParent_Impl( Window *pNew ) :
1808         _pOld( Application::GetDefDialogParent() )
1809         { Application::SetDefDialogParent( pNew ); }
1810 
1811     ~SvtDefModalDialogParent_Impl() { Application::SetDefDialogParent( _pOld ); }
1812 };
1813 
1814 //*****************************************************************************
1815 
1816 //---------------------------------------------------------------------
1817 void SvtFileDialog::updateListboxLabelSizes()
1818 {
1819     sal_Int16 nLineControlId[5] = {
1820         LISTBOX_VERSION, LISTBOX_TEMPLATE, LISTBOX_IMAGE_TEMPLATE, LISTBOX_FILTER, EDIT_FILEURL
1821     };
1822 
1823     // determine the maximum width needed for the listbox labels
1824     long nMaxWidth = 0;
1825     for ( sal_Int32 i=0; i<5; ++i )
1826     {
1827         FixedText* pLabel = static_cast< FixedText* >( getControl( nLineControlId[i], sal_True ) );
1828         if ( !pLabel )
1829             continue;
1830         nMaxWidth = ::std::max( pLabel->GetTextWidth( pLabel->GetText() ), nMaxWidth );
1831     }
1832 
1833     // ensure that all labels are wide enough
1834     for ( sal_Int32 i=0; i<5; ++i )
1835     {
1836         FixedText* pLabel = static_cast< FixedText* >( getControl( nLineControlId[i], sal_True ) );
1837         ListBox* pListbox = static_cast< ListBox* >( getControl( nLineControlId[i], sal_False ) );
1838         if ( !pLabel || !pListbox )
1839             continue;
1840         Size aCurrentSize( pLabel->GetSizePixel() );
1841         if ( aCurrentSize.Width() >= nMaxWidth )
1842             continue;
1843 
1844         long nChange = nMaxWidth - aCurrentSize.Width();
1845         pLabel->SetSizePixel( Size( nMaxWidth, aCurrentSize.Height() ) );
1846 
1847         aCurrentSize = pListbox->GetSizePixel();
1848         pListbox->SetSizePixel( Size( aCurrentSize.Width() - nChange, aCurrentSize.Height() ) );
1849         lcl_MoveControl( pListbox, nChange, 0 );
1850     }
1851 }
1852 
1853 namespace
1854 {
1855 
1856 bool implIsInvalid( const String & rURL )
1857 {
1858     SmartContent aContent( rURL );
1859     aContent.enableOwnInteractionHandler( ::svt::OFilePickerInteractionHandler::E_DOESNOTEXIST );
1860     aContent.isFolder();    // do this _before_ asking isInvalid! Otherwise result might be wrong.
1861     return aContent.isInvalid();
1862 }
1863 
1864 }
1865 
1866 //---------------------------------------------------------------------
1867 String SvtFileDialog::implGetInitialURL( const String& _rPath, const String& _rFallback )
1868 {
1869     // an URL parser for the fallback
1870     INetURLObject aURLParser;
1871 
1872     // set the path
1873     bool bWasAbsolute = sal_False;
1874     aURLParser = aURLParser.smartRel2Abs( _rPath, bWasAbsolute );
1875 
1876     // is it a valid folder?
1877     m_aContent.bindTo( aURLParser.GetMainURL( INetURLObject::NO_DECODE ) );
1878     sal_Bool bIsFolder = m_aContent.isFolder( );    // do this _before_ asking isInvalid!
1879     sal_Bool bIsInvalid = m_aContent.isInvalid();
1880 
1881     if ( bIsInvalid && m_bHasFilename && !aURLParser.hasFinalSlash() )
1882     {   // check if the parent folder exists
1883         // #108429# - 2003-03-26 - fs@openoffice.org
1884         INetURLObject aParent( aURLParser );
1885         aParent.removeSegment( );
1886         aParent.setFinalSlash( );
1887         bIsInvalid = implIsInvalid( aParent.GetMainURL( INetURLObject::NO_DECODE ) );
1888     }
1889 
1890     if ( bIsInvalid )
1891     {
1892         INetURLObject aFallback( _rFallback );
1893         bIsInvalid = implIsInvalid( aFallback.GetMainURL( INetURLObject::NO_DECODE ) );
1894 
1895         if ( !bIsInvalid )
1896             aURLParser = aFallback;
1897     }
1898 
1899     if ( bIsInvalid )
1900     {
1901         INetURLObject aParent( aURLParser );
1902         while ( bIsInvalid && aParent.removeSegment() )
1903         {
1904             aParent.setFinalSlash( );
1905             bIsInvalid = implIsInvalid( aParent.GetMainURL( INetURLObject::NO_DECODE ) );
1906         }
1907 
1908         if ( !bIsInvalid )
1909             aURLParser = aParent;
1910     }
1911 
1912     if ( !bIsInvalid && bIsFolder )
1913     {
1914         aURLParser.setFinalSlash();
1915     }
1916     return aURLParser.GetMainURL( INetURLObject::NO_DECODE );
1917 }
1918 
1919 //---------------------------------------------------------------------
1920 short SvtFileDialog::Execute()
1921 {
1922     if ( !PrepareExecute() )
1923         return 0;
1924 
1925     // Start des Dialogs.
1926     _bIsInExecute = sal_True;
1927     short nResult = ModalDialog::Execute();
1928     _bIsInExecute = sal_False;
1929 
1930     DBG_ASSERT( !m_pCurrentAsyncAction.is(), "SvtFilePicker::Execute: still running an async action!" );
1931         // the dialog should not be cancellable while an async action is running - firs, the action
1932         // needs to be cancelled
1933 
1934     // letztes Verzeichnis merken
1935     if ( RET_OK == nResult )
1936     {
1937         INetURLObject aURL( _aPath );
1938         if ( aURL.GetProtocol() == INET_PROT_FILE )
1939         {
1940             // nur bei File-URL's und nicht bei virtuelle Folder
1941             // das ausgew"ahlte Verzeichnis merken
1942             sal_Int32 nLevel = aURL.getSegmentCount();
1943             // #97148# & #102204# ------
1944             sal_Bool bDir = m_aContent.isFolder( aURL.GetMainURL( INetURLObject::NO_DECODE ) );
1945             // sal_Bool bClassPath = ( ( _pImp->_nStyle & SFXWB_CLASSPATH ) == SFXWB_CLASSPATH );
1946             if ( nLevel > 1 && ( FILEDLG_TYPE_FILEDLG == _pImp->_eDlgType || !bDir ) )
1947                 aURL.removeSegment();
1948         }
1949     }
1950 
1951     return nResult;
1952 }
1953 
1954 //---------------------------------------------------------------------
1955 void SvtFileDialog::StartExecuteModal( const Link& rEndDialogHdl )
1956 {
1957     PrepareExecute();
1958 
1959     // Start des Dialogs.
1960 //    _bIsInExecute = sal_True;
1961     ModalDialog::StartExecuteModal( rEndDialogHdl );
1962 }
1963 
1964 //-----------------------------------------------------------------------------
1965 void SvtFileDialog::onAsyncOperationStarted()
1966 {
1967     EnableUI( sal_False );
1968     // the cancel button must be always enabled
1969     _pImp->_pBtnCancel->Enable( sal_True );
1970     _pImp->_pBtnCancel->GrabFocus();
1971 }
1972 
1973 //-----------------------------------------------------------------------------
1974 void SvtFileDialog::onAsyncOperationFinished()
1975 {
1976     EnableUI( sal_True );
1977     m_pCurrentAsyncAction = NULL;
1978     if ( !m_bInExecuteAsync )
1979         _pImp->_pEdFileName->GrabFocus();
1980         // (if m_bInExecuteAsync is true, then the operation was finished within the minium wait time,
1981         // and to the user, the operation appears to be synchronous)
1982 }
1983 
1984 //-------------------------------------------------------------------------
1985 void SvtFileDialog::displayIOException( const String& _rURL, IOErrorCode _eCode )
1986 {
1987     try
1988     {
1989         // create make a human-readable string from the URL
1990         String sDisplayPath( _rURL );
1991         ::utl::LocalFileHelper::ConvertURLToSystemPath( _rURL, sDisplayPath );
1992 
1993         // build an own exception which tells "access denied"
1994         InteractiveAugmentedIOException aException;
1995         aException.Arguments.realloc( 2 );
1996         aException.Arguments[ 0 ] <<= ::rtl::OUString( sDisplayPath );
1997         aException.Arguments[ 1 ] <<= PropertyValue(
1998             ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Uri" ) ),
1999             -1, aException.Arguments[ 0 ], PropertyState_DIRECT_VALUE
2000         );
2001             // (formerly, it was sufficient to put the URL first parameter. Nowadays,
2002             // the services expects the URL in a PropertyValue named "Uri" ...)
2003         aException.Code = _eCode;
2004         aException.Classification = InteractionClassification_ERROR;
2005 
2006         // let and interaction handler handle this exception
2007         ::comphelper::OInteractionRequest* pRequest = NULL;
2008         Reference< ::com::sun::star::task::XInteractionRequest > xRequest = pRequest =
2009             new ::comphelper::OInteractionRequest( makeAny( aException ) );
2010         pRequest->addContinuation( new ::comphelper::OInteractionAbort( ) );
2011 
2012         Reference< XInteractionHandler > xHandler(
2013             ::comphelper::getProcessServiceFactory()->createInstance(
2014                 ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM("com.sun.star.task.InteractionHandler") )
2015             ),
2016             UNO_QUERY
2017         );
2018         if ( xHandler.is() )
2019             xHandler->handle( xRequest );
2020     }
2021     catch( const Exception& )
2022     {
2023         DBG_ERROR( "iodlg::displayIOException: caught an exception!" );
2024     }
2025 }
2026 
2027 //-----------------------------------------------------------------------------
2028 void SvtFileDialog::EnableUI( sal_Bool _bEnable )
2029 {
2030     Enable( _bEnable );
2031 
2032     if ( _bEnable )
2033     {
2034         for ( ::std::set< Control* >::iterator aLoop = m_aDisabledControls.begin();
2035               aLoop != m_aDisabledControls.end();
2036               ++aLoop
2037             )
2038         {
2039             (*aLoop)->Enable( sal_False );
2040         }
2041     }
2042 }
2043 
2044 //-----------------------------------------------------------------------------
2045 void SvtFileDialog::EnableControl( Control* _pControl, sal_Bool _bEnable )
2046 {
2047     if ( !_pControl )
2048     {
2049         DBG_ERRORFILE( "SvtFileDialog::EnableControl: invalid control!" );
2050         return;
2051     }
2052 
2053     _pControl->Enable( _bEnable );
2054 
2055     if ( _bEnable )
2056     {
2057         ::std::set< Control* >::iterator aPos = m_aDisabledControls.find( _pControl );
2058         if ( m_aDisabledControls.end() != aPos )
2059             m_aDisabledControls.erase( aPos );
2060     }
2061     else
2062         m_aDisabledControls.insert( _pControl );
2063 }
2064 
2065 //----------------------------------------------------------------------------
2066 
2067 short SvtFileDialog::PrepareExecute()
2068 {
2069     rtl::OUString aEnvValue;
2070     if ( getEnvironmentValue( "WorkDirMustContainRemovableMedia", aEnvValue ) &&
2071          aEnvValue.equalsAscii( "1" ) )
2072     {
2073         try
2074         {
2075             INetURLObject aStdDir( GetStandardDir() );
2076             ::ucbhelper::Content aCnt( rtl::OUString( aStdDir.GetMainURL(
2077                                                     INetURLObject::NO_DECODE ) ),
2078                                  Reference< XCommandEnvironment >() );
2079             Sequence< rtl::OUString > aProps(2);
2080             aProps[0] = rtl::OUString::createFromAscii( "IsVolume" );
2081             aProps[1] = rtl::OUString::createFromAscii( "IsRemoveable" );
2082 
2083             Reference< XResultSet > xResultSet
2084                 = aCnt.createCursor( aProps, ::ucbhelper::INCLUDE_FOLDERS_ONLY );
2085             if ( xResultSet.is() )
2086             {
2087                 Reference< XRow > xRow( xResultSet, UNO_QUERY );
2088 
2089                 bool bEmpty = true;
2090                 if ( !xResultSet->next() )
2091                 {
2092                     // folder is empty
2093                     bEmpty = true;
2094                 }
2095                 else
2096                 {
2097 // @@@ KSO 05/18/2006: support for removable media currently hardcoded/incomplete in OSL
2098 //
2099 //                    do
2100 //                    {
2101 //                        // check, whether child is a removable volume
2102 //                        if ( xRow->getBoolean( 1 ) && !xRow->wasNull() )
2103 //                        {
2104 //                            if ( xRow->getBoolean( 2 ) && !xRow->wasNull() )
2105 //                            {
2106                                 bEmpty = false;
2107 //                                break;
2108 //                            }
2109 //                        }
2110 //                    }
2111 //                    while ( xResultSet->next() );
2112                 }
2113 
2114                 if ( bEmpty )
2115                 {
2116                     ErrorBox aBox( this, WB_OK, SvtResId( STR_SVT_NOREMOVABLEDEVICE ) );
2117                     aBox.Execute();
2118                     return 0;
2119                 }
2120             }
2121         }
2122         catch ( ContentCreationException const & )
2123         {
2124         }
2125         catch ( CommandAbortedException const & )
2126         {
2127         }
2128     }
2129 
2130     // #102204# ---------------
2131     if ( ( _pImp->_nStyle & WB_SAVEAS ) && m_bHasFilename )
2132         // when doing a save-as, we do not want the handler to handle "this file does not exist" messages
2133         // - finally we're going to save that file, aren't we?
2134         // #105812# - 2002-12-02 - fs@openoffice.org
2135         m_aContent.enableOwnInteractionHandler(::svt::OFilePickerInteractionHandler::E_DOESNOTEXIST);
2136     else
2137         m_aContent.enableDefaultInteractionHandler();
2138 
2139     // #53016# evtl. nur ein Filename ohne Pfad?
2140     String aFileNameOnly;
2141     if( _aPath.Len() && (_pImp->_eMode == FILEDLG_MODE_SAVE)
2142                      && (_aPath.Search(':') == STRING_NOTFOUND)
2143                      && (_aPath.Search('\\') == STRING_NOTFOUND)
2144                      && (_aPath.Search('/') == STRING_NOTFOUND))
2145     {
2146         aFileNameOnly = _aPath;
2147         _aPath.Erase();
2148     }
2149 
2150     // kein Startpfad angegeben?
2151     if ( !_aPath.Len() )
2152     {
2153         // dann das Standard-Dir verwenden
2154         _aPath = lcl_ensureFinalSlash( _pImp->GetStandardDir() );
2155 
2156         // #53016# vorgegebener Dateiname an Pfad anh"angen
2157         if ( aFileNameOnly.Len() )
2158             _aPath += aFileNameOnly;
2159     }
2160 
2161     //.....................................................................
2162     _aPath = implGetInitialURL( _aPath, GetStandardDir() );
2163 
2164     if ( _pImp->_nStyle & WB_SAVEAS && !m_bHasFilename )
2165         // when doing a save-as, we do not want the handler to handle "this file does not exist" messages
2166         // - finally we're going to save that file, aren't we?
2167         m_aContent.enableOwnInteractionHandler(::svt::OFilePickerInteractionHandler::E_DOESNOTEXIST);
2168 
2169     //.....................................................................
2170     // care for possible restrictions on the paths we're allowed to show
2171     if ( !m_aURLFilter.isUrlAllowed( _aPath ) )
2172         _aPath = m_aURLFilter.getFilter()[0];
2173 
2174     // Ggf. Filter anzeigen.
2175     _pImp->InitFilterList();
2176 
2177     // Initialen Filter einstellen.
2178     sal_uInt16 nFilterCount = GetFilterCount();
2179     String aAll( SvtResId( STR_FILTERNAME_ALL ) );
2180     sal_Bool bHasAll = _pImp->HasFilterListEntry( aAll );
2181     if ( _pImp->GetCurFilter() || nFilterCount == 1 || ( nFilterCount == 2 && bHasAll ) )
2182     {
2183         // Ggf. einzigen Filter als aktuellen Filter setzen oder den einzigen
2184         // Filter, der nicht auf alle Dateien verweist.
2185         if ( !_pImp->GetCurFilter() )
2186         {
2187             sal_uInt16 nPos = 0;
2188             if ( 2 == nFilterCount && bHasAll )
2189             {
2190                 nPos = nFilterCount;
2191                 while ( nPos-- )
2192                 {
2193                     if ( GetFilterName( nPos ) != aAll )
2194                         break;
2195                 }
2196             }
2197             SvtFileDialogFilter_Impl* pNewCurFilter = _pImp->_pFilter->GetObject( nPos );
2198             DBG_ASSERT( pNewCurFilter, "SvtFileDialog::Execute: invalid filter pos!" );
2199             _pImp->SetCurFilter( pNewCurFilter, pNewCurFilter->GetName() );
2200         }
2201 
2202         // Anzeige anpassen.
2203         _pImp->SelectFilterListEntry( _pImp->GetCurFilter()->GetName() );
2204         SetDefaultExt( _pImp->GetCurFilter()->GetExtension() );
2205         sal_uInt16 nSepPos = GetDefaultExt().Search( FILEDIALOG_DEF_EXTSEP );
2206         if ( nSepPos != STRING_NOTFOUND )
2207             EraseDefaultExt( nSepPos );
2208     }
2209     else
2210     {
2211         // Ggf. Filter fuer alle Dateien setzen bzw. erzeugen.
2212         if ( !bHasAll )
2213         {
2214             SvtFileDialogFilter_Impl* pAllFilter = implAddFilter( aAll, UniString(RTL_CONSTASCII_USTRINGPARAM(FILEDIALOG_FILTER_ALL)) );
2215             _pImp->InsertFilterListEntry( pAllFilter );
2216             _pImp->SetCurFilter( pAllFilter, aAll );
2217         }
2218         _pImp->SelectFilterListEntry( aAll );
2219     }
2220 
2221     _pImp->_pDefaultFilter = _pImp->GetCurFilter();
2222 
2223     // HACK #50065#
2224     // ggf. Filter isolieren.
2225     String aFilter;
2226 
2227     if ( !IsolateFilterFromPath_Impl( _aPath, aFilter ) )
2228         return 0;
2229 
2230     sal_uInt16 nNewFilterFlags = adjustFilter( aFilter );
2231     if ( nNewFilterFlags & ( FLT_NONEMPTY | FLT_USERFILTER ) )
2232     {
2233         _pImp->_pEdFileName->SetText( aFilter );
2234     }
2235     // HACK #50065#
2236 
2237     // Instanz fuer den gesetzten Pfad erzeugen und anzeigen.
2238     INetURLObject aFolderURL( _aPath );
2239     String aFileName( aFolderURL.getName( INetURLObject::LAST_SEGMENT, false ) );
2240     xub_StrLen nFileNameLen = aFileName.Len();
2241     bool bFileToSelect = nFileNameLen != 0;
2242     if ( bFileToSelect && aFileName.GetChar( nFileNameLen - 1 ) != INET_PATH_TOKEN )
2243     {
2244         _pImp->_pEdFileName->SetText( GET_DECODED_NAME( aFolderURL ) );
2245         aFolderURL.removeSegment();
2246     }
2247 
2248     INetURLObject aObj = aFolderURL;
2249     if ( aObj.GetProtocol() == INET_PROT_FILE )
2250     {
2251         // Ordner als aktuelles Verzeichnis setzen.
2252         aObj.setFinalSlash();
2253     }
2254 
2255     UpdateControls( aObj.GetMainURL( INetURLObject::NO_DECODE ) );
2256 
2257     // Somebody might want to enable some controls acording to the current filter
2258     FilterSelect();
2259 
2260     // Zustand der Steuerelemente anpassen.
2261 //  EndListeningAll();
2262 
2263     ViewHdl_Impl( this, NULL );
2264     OpenURL_Impl( aObj.GetMainURL( INetURLObject::NO_DECODE ) );
2265 
2266     _pFileView->Show();
2267     SvtDefModalDialogParent_Impl aDefParent( this );
2268 
2269     // ggf. Gr"osse aus Ini lesen und setzen
2270     InitSize();
2271 
2272     return 1;
2273 }
2274 
2275 //-----------------------------------------------------------------------------
2276 void SvtFileDialog::implInitializeSpecialURLLists( )
2277 {
2278     m_aURLFilter = ::svt::RestrictedPaths();
2279 
2280     ::std::vector< String > aFavourites;
2281     if ( m_aURLFilter.hasFilter() )
2282     {
2283         // if we have restrictions, then the "favourites" are the restricted folders only
2284         aFavourites = m_aURLFilter.getFilter();
2285         // for approved URLs, we needed the final slashes, for
2286         // favourites, we do not want to have them
2287         ::std::for_each( aFavourites.begin(), aFavourites.end(), RemoveFinalSlash() );
2288     }
2289     else
2290     {
2291         ::rtl::OUString sFavouritesList;
2292         if ( getEnvironmentValue( "PathFavourites", sFavouritesList ) )
2293             convertStringListToUrls( sFavouritesList, aFavourites, false );
2294     }
2295 
2296     DBG_ASSERT( _pImp->_pBtnStandard, "SvtFileDialog::implInitializeSpecialURLLists: how this?" );
2297     if ( _pImp->_pBtnStandard )
2298         _pImp->_pBtnStandard->SetFavouriteLocations( aFavourites );
2299 }
2300 
2301 //-----------------------------------------------------------------------------
2302 void SvtFileDialog::executeAsync( ::svt::AsyncPickerAction::Action _eAction,
2303                                     const String& _rURL, const String& _rFilter )
2304 {
2305     DBG_ASSERT( !m_pCurrentAsyncAction.is(), "SvtFileDialog::executeAsync: previous async action not yet finished!" );
2306 
2307     m_pCurrentAsyncAction = new AsyncPickerAction( this, _pFileView, _eAction );
2308 
2309     bool bReallyAsync = true;
2310     m_aConfiguration.getNodeValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "FillAsynchronously" ) ) ) >>= bReallyAsync;
2311 
2312     sal_Int32 nMinTimeout = 0;
2313     m_aConfiguration.getNodeValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Timeout/Min" ) ) ) >>= nMinTimeout;
2314     sal_Int32 nMaxTimeout = 0;
2315     m_aConfiguration.getNodeValue( ::rtl::OUString( RTL_CONSTASCII_USTRINGPARAM( "Timeout/Max" ) ) ) >>= nMaxTimeout;
2316 
2317     m_bInExecuteAsync = true;
2318     m_pCurrentAsyncAction->execute( _rURL, _rFilter, bReallyAsync ? nMinTimeout : -1, nMaxTimeout, GetBlackList() );
2319     m_bInExecuteAsync = false;
2320 }
2321 
2322 //*****************************************************************************
2323 
2324 void SvtFileDialog::FileSelect()
2325 {
2326     if ( _pFileNotifier )
2327         _pFileNotifier->notify( FILE_SELECTION_CHANGED, 0 );
2328 }
2329 
2330 //*****************************************************************************
2331 
2332 void SvtFileDialog::FilterSelect()
2333 {
2334     if ( _pFileNotifier )
2335         _pFileNotifier->notify( CTRL_STATE_CHANGED,
2336                                 LISTBOX_FILTER );
2337 }
2338 
2339 //*****************************************************************************
2340 
2341 void SvtFileDialog::SetStandardDir( const String& rStdDir )
2342 
2343 /*  [Beschreibung]
2344 
2345     Die Methode setzt den Pfad f"ur den Standardknopf.
2346 */
2347 
2348 {
2349     INetURLObject aObj( rStdDir );
2350     DBG_ASSERT( aObj.GetProtocol() != INET_PROT_NOT_VALID, "Invalid protocol!" );
2351     aObj.setFinalSlash();
2352     _pImp->SetStandardDir( aObj.GetMainURL( INetURLObject::NO_DECODE ) );
2353 }
2354 
2355 void SvtFileDialog::SetBlackList( const ::com::sun::star::uno::Sequence< ::rtl::OUString >& rBlackList )
2356 {
2357     _pImp->SetBlackList( rBlackList );
2358 }
2359 
2360 //*****************************************************************************
2361 
2362 const ::com::sun::star::uno::Sequence< ::rtl::OUString >& SvtFileDialog::GetBlackList() const
2363 {
2364     return _pImp->GetBlackList();
2365 }
2366 //*****************************************************************************
2367 
2368 const String& SvtFileDialog::GetStandardDir() const
2369 
2370 /*  [Beschreibung]
2371 
2372     Diese Methode gibt den eingestellten Standardpfad zur"uck.
2373 */
2374 
2375 {
2376     return _pImp->GetStandardDir();
2377 }
2378 
2379 //*****************************************************************************
2380 
2381 void SvtFileDialog::PrevLevel_Impl()
2382 {
2383     _pFileView->EndInplaceEditing( false );
2384 
2385     String sDummy;
2386     executeAsync( AsyncPickerAction::ePrevLevel, sDummy, sDummy );
2387 }
2388 
2389 //*****************************************************************************
2390 
2391 void SvtFileDialog::OpenURL_Impl( const String& _rURL )
2392 {
2393     _pFileView->EndInplaceEditing( false );
2394 
2395     DBG_ASSERT( m_aURLFilter.isUrlAllowed( _rURL ), "SvtFileDialog::OpenURL_Impl: forbidden URL! Should have been handled by the caller!" );
2396     executeAsync( AsyncPickerAction::eOpenURL, _rURL, getMostCurrentFilter( _pImp ) );
2397 }
2398 
2399 //*****************************************************************************
2400 SvtFileDialogFilter_Impl* SvtFileDialog::implAddFilter( const String& _rFilter, const String& _rType )
2401 {
2402     SvtFileDialogFilter_Impl* pNewFilter = new SvtFileDialogFilter_Impl( _rFilter, _rType );
2403     _pImp->_pFilter->C40_INSERT( SvtFileDialogFilter_Impl, pNewFilter, (sal_uInt16)0 );
2404 
2405     if ( !_pImp->GetCurFilter() )
2406         _pImp->SetCurFilter( pNewFilter, _rFilter );
2407 
2408     return pNewFilter;
2409 }
2410 
2411 //*****************************************************************************
2412 
2413 void SvtFileDialog::AddFilter( const String& _rFilter, const String& _rType )
2414 {
2415     DBG_ASSERT( !IsInExecute(), "SvtFileDialog::AddFilter: currently executing!" );
2416     implAddFilter ( _rFilter, _rType );
2417 }
2418 
2419 //*****************************************************************************
2420 void SvtFileDialog::AddFilterGroup( const String& _rFilter, const Sequence< StringPair >& _rFilters )
2421 {
2422     DBG_ASSERT( !IsInExecute(), "SvtFileDialog::AddFilter: currently executing!" );
2423 
2424     implAddFilter( _rFilter, String() );
2425     const StringPair* pSubFilters       =               _rFilters.getConstArray();
2426     const StringPair* pSubFiltersEnd    = pSubFilters + _rFilters.getLength();
2427     for ( ; pSubFilters != pSubFiltersEnd; ++pSubFilters )
2428         implAddFilter( pSubFilters->First, pSubFilters->Second );
2429 }
2430 
2431 //*****************************************************************************
2432 
2433 //-----------------------------------------------------------------------------
2434 void SvtFileDialog::SetCurFilter( const String& rFilter )
2435 {
2436     DBG_ASSERT( !IsInExecute(), "SvtFileDialog::SetCurFilter: currently executing!" );
2437 
2438     // Entsprechenden Filter suchen.
2439     sal_uInt16 nPos = _pImp->_pFilter->Count();
2440 
2441     while ( nPos-- )
2442     {
2443         SvtFileDialogFilter_Impl* pFilter = _pImp->_pFilter->GetObject( nPos );
2444         if ( pFilter->GetName() == rFilter )
2445         {
2446             _pImp->SetCurFilter( pFilter, rFilter );
2447             break;
2448         }
2449     }
2450 }
2451 
2452 //*****************************************************************************
2453 
2454 String SvtFileDialog::GetCurFilter() const
2455 {
2456     String aFilter;
2457 
2458     const SvtFileDialogFilter_Impl* pCurrentFilter = _pImp->GetCurFilter();
2459     if ( pCurrentFilter )
2460         aFilter = pCurrentFilter->GetName();
2461 
2462     return aFilter;
2463 }
2464 
2465 String SvtFileDialog::getCurFilter( ) const
2466 {
2467     return GetCurFilter();
2468 }
2469 
2470 //*****************************************************************************
2471 
2472 sal_uInt16 SvtFileDialog::GetFilterCount() const
2473 {
2474     return _pImp->_pFilter->Count();
2475 }
2476 
2477 //*****************************************************************************
2478 
2479 const String& SvtFileDialog::GetFilterName( sal_uInt16 nPos ) const
2480 {
2481     DBG_ASSERT( nPos < GetFilterCount(), "invalid index" );
2482     return _pImp->_pFilter->GetObject( nPos )->GetName();
2483 }
2484 
2485 //*****************************************************************************
2486 
2487 void SvtFileDialog::InitSize()
2488 {
2489     if ( ! _pImp->_aIniKey.Len() )
2490         return;
2491 
2492     Size aDlgSize = GetResizeOutputSizePixel();
2493     SetMinOutputSizePixel( aDlgSize );
2494 
2495     if ( !_pImp->_nFixDeltaHeight )
2496     {
2497         // Fixgr"ossen errechnen und merken
2498         Point aPnt = _pFileView->GetPosPixel();
2499         long nBoxH = _pFileView->GetSizePixel().Height();
2500         long nH = GetSizePixel().Height();
2501         _pImp->_nFixDeltaHeight = nH - nBoxH;
2502     }
2503 
2504     // initialize from config
2505     SvtViewOptions aDlgOpt( E_DIALOG, _pImp->_aIniKey );
2506 
2507     if ( aDlgOpt.Exists() )
2508     {
2509         SetWindowState( ByteString( String( aDlgOpt.GetWindowState() ), osl_getThreadTextEncoding() ) );
2510 
2511         Any aUserData = aDlgOpt.GetUserItem( ::rtl::OUString::createFromAscii( "UserData" ) );
2512         ::rtl::OUString sCfgStr;
2513         if ( aUserData >>= sCfgStr )
2514             _pFileView->SetConfigString( String( sCfgStr ) );
2515     }
2516 }
2517 
2518 //*****************************************************************************
2519 
2520 SvStringsDtor* SvtFileDialog::GetPathList() const
2521 {
2522     SvStringsDtor*  pList = new SvStringsDtor;
2523     sal_uLong           nCount = _pFileView->GetSelectionCount();
2524     SvLBoxEntry*    pEntry = nCount ? _pFileView->FirstSelected() : NULL;
2525 
2526     if ( ! pEntry )
2527     {
2528         String* pURL;
2529 
2530         if ( _pImp->_pEdFileName->GetText().Len() && _bIsInExecute )
2531             pURL = new String( _pImp->_pEdFileName->GetURL() );
2532         else
2533             pURL = new String( _aPath );
2534 
2535         pList->Insert( pURL, pList->Count() );
2536     }
2537     else
2538     {
2539         while ( pEntry )
2540         {
2541             String* pURL = new String( _pFileView->GetURL( pEntry ) );
2542             pList->Insert( pURL, pList->Count() );
2543             pEntry = _pFileView->NextSelected( pEntry );
2544         }
2545     }
2546 
2547     return pList;
2548 }
2549 
2550 //*****************************************************************************
2551 
2552 void SvtFileDialog::implArrangeControls()
2553 {
2554     // this is the list of controls in the order they should be tabbed
2555     // from topleft to bottomright
2556     // pb: #136070# new order so all LabeledBy relations are correct now
2557     Control* pControls[] =
2558     {
2559         _pImp->_pFtCurrentPath,
2560         _pImp->_pBtnUp, _pImp->_pBtnNewFolder, _pImp->_pBtnStandard,        // image buttons
2561         _pFileView,                                                         // the file view
2562         _pImp->_pFtFileName, _pImp->_pEdFileName,
2563         _pImp->_pFtFileVersion, _pImp->_pLbFileVersion,
2564         _pImp->_pFtTemplates, _pImp->_pLbTemplates,
2565         _pImp->_pFtImageTemplates, _pImp->_pLbImageTemplates,
2566         _pImp->_pFtFileType, _pImp->GetFilterListControl(),                 // edit fields/list boxes
2567         _pImp->_pCbPassword, _pImp->_pCbAutoExtension, _pImp->_pCbOptions,  // checkboxes
2568         _pCbReadOnly, _pCbLinkBox, _pCbPreviewBox, _pCbSelection, _pPbPlay, // check boxes (continued)
2569         _pImp->_pBtnFileOpen, _pImp->_pBtnCancel, _pImp->_pBtnHelp          // buttons
2570 
2571         // (including the FixedTexts is important - not for tabbing order (they're irrelevant there),
2572         // but for working keyboard shortcuts)
2573         // 96861 - 23.01.2002 - fs@openoffice.org
2574     };
2575 
2576     // loop through all these controls and adjust the z-order
2577     Window* pPreviousWin = NULL;
2578     Control** pCurrent = pControls;
2579     for ( sal_Int32 i = 0; i < sal_Int32(sizeof( pControls ) / sizeof( pControls[ 0 ] )); ++i, ++pCurrent )
2580     {
2581         if ( !*pCurrent )
2582             // this control is not available in the current operation mode -> skip
2583             continue;
2584 
2585         if ( pPreviousWin )
2586             (*pCurrent)->SetZOrder( pPreviousWin, WINDOW_ZORDER_BEHIND );
2587         else
2588             (*pCurrent)->SetZOrder( NULL, WINDOW_ZORDER_FIRST );
2589 
2590         pPreviousWin = *pCurrent;
2591     }
2592 
2593     // FileName edit not the first control but it should have the focus initially
2594     _pImp->_pEdFileName->GrabFocus();
2595 }
2596 
2597 //*****************************************************************************
2598 
2599 sal_Bool SvtFileDialog::IsolateFilterFromPath_Impl( String& rPath, String& rFilter )
2600 {
2601     String aEmpty;
2602     String aReversePath( rPath );
2603     aReversePath.Reverse();
2604     sal_uInt16 nQuestionMarkPos = rPath.Search( '?' );
2605 
2606     if ( nQuestionMarkPos != STRING_NOTFOUND )
2607     {
2608         // Fragezeichen als Wildcard nur bei Files
2609         INetProtocol eProt = INetURLObject::CompareProtocolScheme( rPath );
2610 
2611         if ( INET_PROT_NOT_VALID != eProt && INET_PROT_FILE != eProt )
2612             nQuestionMarkPos = STRING_NOTFOUND;
2613     }
2614     sal_uInt16 nWildCardPos = Min( rPath.Search( FILEDIALOG_DEF_WILDCARD ), nQuestionMarkPos );
2615     rFilter = aEmpty;
2616 
2617     if ( nWildCardPos != STRING_NOTFOUND )
2618     {
2619         sal_uInt16 nPathTokenPos = aReversePath.Search( INET_PATH_TOKEN );
2620 
2621         if ( nPathTokenPos == STRING_NOTFOUND )
2622         {
2623             String aDelim(
2624 #if defined(WNT) || defined(OS2)
2625                     '\\'
2626 #else
2627                     '/'
2628 #endif
2629             );
2630 
2631             nPathTokenPos = aReversePath.Search( aDelim );
2632 #if defined(OS2)
2633             if ( nPathTokenPos == STRING_NOTFOUND )
2634             {
2635                 nPathTokenPos = aReversePath.Search( '/' );
2636             }
2637 #endif
2638 #if !defined( UNX )
2639             if ( nPathTokenPos == STRING_NOTFOUND )
2640             {
2641                 nPathTokenPos = aReversePath.Search( ':' );
2642             }
2643 #endif
2644         }
2645 
2646         // Syntax pr"ufen.
2647         if ( nPathTokenPos != STRING_NOTFOUND )
2648         {
2649             if ( nPathTokenPos < (rPath.Len() - nWildCardPos - 1) )
2650             {
2651                 ErrorHandler::HandleError( ERRCODE_SFX_INVALIDSYNTAX );
2652                 return sal_False;
2653             }
2654 
2655             // Filter abschneiden.
2656             rFilter = aReversePath;
2657             rFilter.Erase( nPathTokenPos );
2658             rFilter.Reverse();
2659 
2660             // Ordner bestimmen.
2661             rPath = aReversePath;
2662             rPath.Erase( 0, nPathTokenPos );
2663             rPath.Reverse();
2664         }
2665         else
2666         {
2667             rFilter = rPath;
2668             rPath = aEmpty;
2669         }
2670     }
2671 
2672     return sal_True;
2673 }
2674 
2675 //*****************************************************************************
2676 
2677 //-----------------------------------------------------------------------------
2678 void SvtFileDialog::implUpdateImages( )
2679 {
2680     // determine high contrast mode
2681     {
2682         sal_Bool bIsHighContrast = GetSettings().GetStyleSettings().GetHighContrastMode();
2683         m_aImages = ImageList( SvtResId( bIsHighContrast ? RID_FILEPICKER_IMAGES_HC : RID_FILEPICKER_IMAGES ) );
2684     }
2685 
2686     // set the appropriate images on the buttons
2687     if ( _pImp->_pBtnUp )
2688         _pImp->_pBtnUp->SetModeImage( GetButtonImage( IMG_FILEDLG_BTN_UP ) );
2689 
2690     if ( _pImp->_pBtnStandard )
2691         _pImp->_pBtnStandard->SetModeImage( GetButtonImage( IMG_FILEDLG_BTN_STD ) );
2692 
2693     if ( _pImp->_pBtnNewFolder )
2694         _pImp->_pBtnNewFolder->SetModeImage( GetButtonImage( IMG_FILEDLG_CREATEFOLDER ) );
2695 }
2696 
2697 //-----------------------------------------------------------------------------
2698 void SvtFileDialog::DataChanged( const DataChangedEvent& _rDCEvt )
2699 {
2700     if ( DATACHANGED_SETTINGS == _rDCEvt.GetType() )
2701         implUpdateImages( );
2702 
2703     ModalDialog::DataChanged( _rDCEvt );
2704 }
2705 
2706 //-----------------------------------------------------------------------------
2707 void SvtFileDialog::Resize()
2708 {
2709     if ( IsRollUp() )
2710         return;
2711 
2712     Size aDlgSize = GetResizeOutputSizePixel();
2713     Size aOldSize = _pImp->_aDlgSize;
2714     _pImp->_aDlgSize = aDlgSize;
2715     long nWinDeltaW = 0;
2716 
2717     if ( _pPrevWin &&
2718          _pPrevWin->GetPosPixel().X() > _pFileView->GetPosPixel().X() )
2719     {
2720         nWinDeltaW = _pPrevWin->GetOutputSizePixel().Width() + _pImp->_a6Size.Width();
2721     }
2722 
2723     Size aNewSize = _pFileView->GetSizePixel();
2724     Point aBoxPos( _pFileView->GetPosPixel() );
2725     long nDeltaY = aNewSize.Height();
2726     long nDeltaX = aNewSize.Width();
2727     aNewSize.Height() = aDlgSize.Height() - _pImp->_nFixDeltaHeight;
2728     aNewSize.Width() = aDlgSize.Width() - aBoxPos.X() - _pImp->_a6Size.Width() - nWinDeltaW;
2729     if ( aOldSize.Height() )
2730         nDeltaY = _pImp->_aDlgSize.Height() - aOldSize.Height();
2731     else
2732         nDeltaY = aNewSize.Height() - nDeltaY;
2733     nDeltaX = aNewSize.Width() - nDeltaX;
2734 
2735     if ( nWinDeltaW )
2736         nWinDeltaW = nDeltaX * 2 / 3;
2737     aNewSize.Width() -= nWinDeltaW;
2738     nDeltaX -= nWinDeltaW;
2739 
2740     _pFileView->SetSizePixel( aNewSize );
2741 
2742     if ( !nDeltaY && !nDeltaX )
2743         // Dieses Resize wurde nur zum Ein - oder Ausblenden des Indicators aufgerufen
2744         return;
2745 
2746     // -------------
2747     // move controls
2748 
2749     // controls to move vertically
2750     {
2751         Control* aMoveControlsVert[] =
2752         {
2753             _pImp->_pFtFileName, _pImp->_pEdFileName, _pImp->_pFtFileVersion, _pImp->_pLbFileVersion,
2754             _pImp->_pFtTemplates, _pImp->_pLbTemplates, _pImp->_pFtImageTemplates, _pImp->_pLbImageTemplates,
2755             _pImp->_pFtFileType, _pImp->GetFilterListControl(), _pCbReadOnly, _pCbLinkBox, _pCbPreviewBox,
2756             _pPbPlay, _pImp->_pCbPassword, _pImp->_pCbAutoExtension, _pImp->_pCbOptions, _pCbSelection
2757         };
2758         Control** ppMoveControls = aMoveControlsVert;
2759         Control** ppMoveControlsEnd = ppMoveControls + sizeof( aMoveControlsVert ) / sizeof( aMoveControlsVert[0] );
2760         for ( ; ppMoveControls != ppMoveControlsEnd; ++ppMoveControls )
2761             lcl_MoveControl( *ppMoveControls, 0, nDeltaY );
2762     }
2763 
2764     // controls to move vertically and horizontally
2765     {
2766         Control* aMoveControlsBoth[] =
2767         {
2768             _pImp->_pBtnFileOpen, _pImp->_pBtnCancel, _pImp->_pBtnHelp
2769         };
2770         Control** ppMoveControls = aMoveControlsBoth;
2771         Control** ppMoveControlsEnd = ppMoveControls + sizeof( aMoveControlsBoth ) / sizeof( aMoveControlsBoth[0] );
2772         for ( ; ppMoveControls != ppMoveControlsEnd; ++ppMoveControls )
2773             lcl_MoveControl( *ppMoveControls, nDeltaX, nDeltaY );
2774     }
2775 
2776     // controls to move horizontally
2777     {
2778         Control* aMoveControlsHor[] =
2779         {
2780             _pImp->_pBtnUp, _pImp->_pBtnNewFolder, _pImp->_pBtnStandard
2781         };
2782         Control** ppMoveControls = aMoveControlsHor;
2783         Control** ppMoveControlsEnd = ppMoveControls + sizeof( aMoveControlsHor ) / sizeof( aMoveControlsHor[0] );
2784         for ( ; ppMoveControls != ppMoveControlsEnd; ++ppMoveControls )
2785             lcl_MoveControl( *ppMoveControls, nDeltaX, 0 );
2786     }
2787 
2788     // ---------------
2789     // resize controls
2790     {
2791         Control* aSizeControls[] =
2792         {
2793             _pImp->_pEdFileName, _pImp->_pLbFileVersion, _pImp->_pLbTemplates, _pImp->_pLbImageTemplates,
2794             _pImp->GetFilterListControl(), _pImp->_pFtCurrentPath,
2795         };
2796         sal_Int32 nSizeControls = sizeof( aSizeControls ) / sizeof( aSizeControls[0] );
2797         Control** ppSizeControls = aSizeControls;
2798         for ( sal_Int32 j=0; j<nSizeControls; ++j, ++ppSizeControls )
2799         {
2800             if ( *ppSizeControls )
2801             {
2802                 aNewSize = (*ppSizeControls)->GetSizePixel();
2803                 aNewSize.Width() += nDeltaX;
2804                 (*ppSizeControls)->SetSizePixel( aNewSize );
2805             }
2806         }
2807     }
2808 
2809     // zus"atzliche Controls ausrichten
2810     if ( _pPrevWin &&
2811          _pPrevWin->GetPosPixel().X() > _pFileView->GetPosPixel().X() )
2812     {
2813         // Controls vom Typ Window speziell ausrichten
2814         // auch die Gr"osse anpassen
2815         Point aNewPos = _pPrevWin->GetPosPixel();
2816         aNewPos.X() += nDeltaX;
2817         _pPrevWin->SetPosPixel( aNewPos );
2818         _pPrevBmp->SetPosPixel( aNewPos );
2819         aNewSize = _pPrevWin->GetOutputSizePixel();
2820         aNewSize.Width() += nWinDeltaW;
2821         aNewSize.Height() += nDeltaY;
2822         if ( !aOldSize.Height() )
2823             aNewSize.Height() -= ( _pImp->_a6Size.Height() / 2 );
2824         _pPrevWin->SetOutputSizePixel( aNewSize );
2825         _pPrevBmp->SetOutputSizePixel( aNewSize );
2826         _pPrevBmp->Invalidate();
2827     }
2828 
2829     if ( _pFileNotifier )
2830         _pFileNotifier->notify( DIALOG_SIZE_CHANGED, 0 );
2831 }
2832 
2833 //*****************************************************************************
2834 
2835 //-----------------------------------------------------------------------------
2836 Control* SvtFileDialog::getControl( sal_Int16 _nControlId, sal_Bool _bLabelControl ) const
2837 {
2838     Control* pReturn = NULL;
2839 
2840     switch ( _nControlId )
2841     {
2842         case CONTROL_FILEVIEW:
2843             pReturn = _bLabelControl ? NULL : static_cast< Control* >( _pFileView );
2844             break;
2845 
2846         case EDIT_FILEURL:
2847             pReturn =   _bLabelControl
2848                     ?   static_cast< Control* >( _pImp->_pFtFileName )
2849                     :   static_cast< Control* >( _pImp->_pEdFileName );
2850             break;
2851 
2852         case EDIT_FILEURL_LABEL:
2853             pReturn = static_cast< Control* >( _pImp->_pFtFileName );
2854             break;
2855 
2856         case CHECKBOX_AUTOEXTENSION:
2857             pReturn = _pImp->_pCbAutoExtension;
2858             break;
2859 
2860         case CHECKBOX_PASSWORD:
2861             pReturn = _pImp->_pCbPassword;
2862             break;
2863 
2864         case CHECKBOX_FILTEROPTIONS:
2865             pReturn = _pImp->_pCbOptions;
2866             break;
2867 
2868         case CHECKBOX_READONLY:
2869             pReturn = _pCbReadOnly;
2870             break;
2871 
2872         case CHECKBOX_LINK:
2873             pReturn = _pCbLinkBox;
2874             break;
2875 
2876         case CHECKBOX_PREVIEW:
2877             pReturn = _pCbPreviewBox;
2878             break;
2879 
2880         case CHECKBOX_SELECTION:
2881             pReturn = _pCbSelection;
2882             break;
2883 
2884         case LISTBOX_FILTER:
2885             pReturn = _bLabelControl ? _pImp->_pFtFileType : _pImp->GetFilterListControl();
2886             break;
2887 
2888         case LISTBOX_FILTER_LABEL:
2889             pReturn = _pImp->_pFtFileType;
2890             break;
2891 
2892         case FIXEDTEXT_CURRENTFOLDER:
2893             pReturn = _pImp->_pFtCurrentPath;
2894             break;
2895 
2896         case LISTBOX_VERSION:
2897             pReturn =   _bLabelControl
2898                     ?   static_cast< Control* >( _pImp->_pFtFileVersion )
2899                     :   static_cast< Control* >( _pImp->_pLbFileVersion );
2900             break;
2901 
2902         case LISTBOX_TEMPLATE:
2903             pReturn =   _bLabelControl
2904                     ?   static_cast< Control* >( _pImp->_pFtTemplates )
2905                     :   static_cast< Control* >( _pImp->_pLbTemplates );
2906             break;
2907 
2908         case LISTBOX_IMAGE_TEMPLATE:
2909             pReturn =   _bLabelControl
2910                     ?   static_cast< Control* >( _pImp->_pFtImageTemplates )
2911                     :   static_cast< Control* >( _pImp->_pLbImageTemplates );
2912             break;
2913 
2914         case LISTBOX_VERSION_LABEL:
2915             pReturn = _pImp->_pFtFileVersion;
2916             break;
2917 
2918         case LISTBOX_TEMPLATE_LABEL:
2919             pReturn = _pImp->_pFtTemplates;
2920             break;
2921 
2922         case LISTBOX_IMAGE_TEMPLATE_LABEL:
2923             pReturn = _pImp->_pFtImageTemplates;
2924             break;
2925 
2926         case PUSHBUTTON_OK:
2927             pReturn = _pImp->_pBtnFileOpen;
2928             break;
2929 
2930         case PUSHBUTTON_CANCEL:
2931             pReturn = _pImp->_pBtnCancel;
2932             break;
2933 
2934         case PUSHBUTTON_PLAY:
2935             pReturn = _pPbPlay;
2936             break;
2937 
2938         case PUSHBUTTON_HELP:
2939             pReturn = _pImp->_pBtnHelp;
2940             break;
2941 
2942         case TOOLBOXBUTOON_DEFAULT_LOCATION:
2943             pReturn = _pImp->_pBtnStandard;
2944             break;
2945 
2946         case TOOLBOXBUTOON_LEVEL_UP:
2947             pReturn = _pImp->_pBtnUp;
2948             break;
2949 
2950         case TOOLBOXBUTOON_NEW_FOLDER:
2951             pReturn = _pImp->_pBtnNewFolder;
2952             break;
2953 
2954         case LISTBOX_FILTER_SELECTOR:
2955             // only exists on SalGtkFilePicker
2956             break;
2957 
2958         default:
2959             DBG_ERRORFILE( "SvtFileDialog::getControl: invalid id!" );
2960     }
2961     return pReturn;
2962 }
2963 
2964 // -----------------------------------------------------------------------
2965 void SvtFileDialog::enableControl( sal_Int16 _nControlId, sal_Bool _bEnable )
2966 {
2967     Control* pControl = getControl( _nControlId, sal_False );
2968     if ( pControl )
2969         EnableControl( pControl, _bEnable );
2970     Control* pLabel = getControl( _nControlId, sal_True );
2971     if ( pLabel )
2972         EnableControl( pLabel, _bEnable );
2973 }
2974 
2975 // -----------------------------------------------------------------------
2976 void SvtFileDialog::AddControls_Impl( )
2977 {
2978     // create the "insert as link" checkbox, if needed
2979     if ( _nExtraBits & SFX_EXTRA_INSERTASLINK )
2980     {
2981         _pCbLinkBox = new CheckBox( this );
2982         _pCbLinkBox ->SetText( SvtResId( STR_SVT_FILEPICKER_INSERT_AS_LINK ) );
2983         _pCbLinkBox ->SetHelpId( HID_FILEDLG_LINK_CB );
2984         AddControl( _pCbLinkBox  );
2985         ReleaseOwnerShip( _pCbLinkBox );
2986         _pCbLinkBox->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
2987     }
2988 
2989     // create the "show preview" checkbox ( and the preview window, too ), if needed
2990     if ( _nExtraBits & SFX_EXTRA_SHOWPREVIEW  )
2991     {
2992         _pImp->_aIniKey = IMPGRF_CONFIGNAME;
2993         // because the "<All Formats> (*.bmp,*...)" entry is to wide,
2994         // we need to disable the auto width feature of the filter box
2995         _pImp->DisableFilterBoxAutoWidth();
2996 
2997         // "Vorschau"
2998         _pCbPreviewBox = new CheckBox( this );
2999         _pCbPreviewBox->SetText( SvtResId( STR_SVT_FILEPICKER_SHOW_PREVIEW ) );
3000         _pCbPreviewBox->SetHelpId( HID_FILEDLG_PREVIEW_CB );
3001         AddControl( _pCbPreviewBox );
3002         ReleaseOwnerShip( _pCbPreviewBox );
3003         _pCbPreviewBox->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
3004 
3005         // Preview-Fenster erst hier erzeugen
3006         _pPrevWin = new Window( this, WinBits( WB_BORDER ) );
3007         AddControl( _pPrevWin );
3008         ReleaseOwnerShip( _pPrevWin );
3009         _pPrevWin->Hide();
3010 
3011         _pPrevBmp = new FixedBitmap( this, WinBits( WB_BORDER ) );
3012         _pPrevBmp->SetBackground( Wallpaper( Color( COL_WHITE ) ) );
3013         _pPrevBmp->Show();
3014         _pPrevBmp->SetAccessibleName(SvtResId(STR_PREVIEW));
3015     }
3016 
3017     if ( _nExtraBits & SFX_EXTRA_AUTOEXTENSION )
3018     {
3019         _pImp->_pCbAutoExtension = new CheckBox( this, SvtResId( CB_AUTO_EXTENSION ) );
3020         _pImp->_pCbAutoExtension->SetText( SvtResId( STR_SVT_FILEPICKER_AUTO_EXTENSION ) );
3021         _pImp->_pCbAutoExtension->Check( sal_True );
3022         AddControl( _pImp->_pCbAutoExtension );
3023         ReleaseOwnerShip( _pImp->_pCbAutoExtension );
3024         _pImp->_pCbAutoExtension->SetClickHdl( LINK( this, SvtFileDialog, AutoExtensionHdl_Impl ) );
3025     }
3026 
3027     if ( _nExtraBits & SFX_EXTRA_FILTEROPTIONS )
3028     {
3029         _pImp->_pCbOptions = new CheckBox( this, SvtResId( CB_OPTIONS ) );
3030         _pImp->_pCbOptions->SetText( SvtResId( STR_SVT_FILEPICKER_FILTER_OPTIONS ) );
3031         AddControl( _pImp->_pCbOptions );
3032         ReleaseOwnerShip( _pImp->_pCbOptions );
3033         _pImp->_pCbOptions->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
3034     }
3035 
3036     if ( _nExtraBits & SFX_EXTRA_SELECTION )
3037     {
3038         _pCbSelection = new CheckBox( this, SvtResId( CB_OPTIONS ) );
3039         _pCbSelection->SetText( SvtResId( STR_SVT_FILEPICKER_SELECTION ) );
3040         AddControl( _pCbSelection );
3041         ReleaseOwnerShip( _pCbSelection );
3042         _pCbSelection->SetClickHdl( LINK( this, SvtFileDialog, ClickHdl_Impl ) );
3043     }
3044 
3045     if ( _nExtraBits & SFX_EXTRA_PLAYBUTTON )
3046     {
3047         _pPbPlay = new PushButton( this );
3048         _pPbPlay->SetText( SvtResId( STR_SVT_FILEPICKER_PLAY ) );
3049         _pPbPlay->SetHelpId( HID_FILESAVE_DOPLAY );
3050         AddControl( _pPbPlay );
3051         ReleaseOwnerShip( _pPbPlay );
3052         _pPbPlay->SetClickHdl( LINK( this, SvtFileDialog, PlayButtonHdl_Impl ) );
3053     }
3054 
3055     if ( _nExtraBits & SFX_EXTRA_SHOWVERSIONS )
3056     {
3057         _pImp->_pFtFileVersion = new FixedText( this, SvtResId( FT_EXPLORERFILE_SHARED_LISTBOX ) );
3058         _pImp->_pFtFileVersion->SetText( SvtResId( STR_SVT_FILEPICKER_VERSION ) );
3059 
3060         _pImp->_pLbFileVersion = new ListBox( this, SvtResId( LB_EXPLORERFILE_SHARED_LISTBOX ) );
3061         _pImp->_pLbFileVersion->SetHelpId( HID_FILEOPEN_VERSION );
3062     }
3063     else if ( _nExtraBits & SFX_EXTRA_TEMPLATES )
3064     {
3065         _pImp->_pFtTemplates = new FixedText( this, SvtResId( FT_EXPLORERFILE_SHARED_LISTBOX ) );
3066         _pImp->_pFtTemplates->SetText( SvtResId( STR_SVT_FILEPICKER_TEMPLATES ) );
3067 
3068         _pImp->_pLbTemplates = new ListBox( this, SvtResId( LB_EXPLORERFILE_SHARED_LISTBOX ) );
3069         _pImp->_pLbTemplates->SetHelpId( HID_FILEOPEN_VERSION );
3070             // This is strange. During the re-factoring during 96930, I discovered that this help id
3071             // is set in the "Templates mode". This was hidden in the previous implementation.
3072             // Shouldn't this be a more meaningfull help id.
3073             // 96930 - 15.08.2002 - fs@openoffice.org
3074     }
3075     else if ( _nExtraBits & SFX_EXTRA_IMAGE_TEMPLATE )
3076     {
3077         _pImp->_pFtImageTemplates = new FixedText( this, SvtResId( FT_EXPLORERFILE_SHARED_LISTBOX ) );
3078         _pImp->_pFtImageTemplates->SetText( SvtResId( STR_SVT_FILEPICKER_IMAGE_TEMPLATE ) );
3079 
3080         _pImp->_pLbImageTemplates = new ListBox( this, SvtResId( LB_EXPLORERFILE_SHARED_LISTBOX ) );
3081         _pImp->_pLbImageTemplates->SetHelpId( HID_FILEOPEN_IMAGE_TEMPLATE );
3082     }
3083 }
3084 
3085 // -----------------------------------------------------------------------
3086 sal_Int32 SvtFileDialog::getTargetColorDepth()
3087 {
3088     if ( _pPrevBmp )
3089         return _pPrevBmp->GetBitCount();
3090     else
3091         return 0;
3092 }
3093 
3094 // -----------------------------------------------------------------------
3095 sal_Int32 SvtFileDialog::getAvailableWidth()
3096 {
3097     if ( _pPrevBmp )
3098         return _pPrevBmp->GetOutputSizePixel().Width();
3099     else
3100         return 0;
3101 }
3102 
3103 // -----------------------------------------------------------------------
3104 sal_Int32 SvtFileDialog::getAvailableHeight()
3105 {
3106     if ( _pPrevBmp )
3107         return _pPrevBmp->GetOutputSizePixel().Height();
3108     else
3109         return 0;
3110 }
3111 
3112 // -----------------------------------------------------------------------
3113 void SvtFileDialog::setImage( sal_Int16 /*aImageFormat*/, const Any& rImage )
3114 {
3115     if ( ! _pPrevBmp || ! _pPrevBmp->IsVisible() )
3116         return;
3117 
3118     Sequence < sal_Int8 > aBmpSequence;
3119 
3120     if ( rImage >>= aBmpSequence )
3121     {
3122         Bitmap          aBmp;
3123         SvMemoryStream  aData( aBmpSequence.getArray(),
3124                                aBmpSequence.getLength(),
3125                                STREAM_READ );
3126         aData >> aBmp;
3127 
3128         _pPrevBmp->SetBitmap( aBmp );
3129     }
3130     else
3131     {
3132         Bitmap aEmpty;
3133         _pPrevBmp->SetBitmap( aEmpty );
3134     }
3135 }
3136 
3137 // -----------------------------------------------------------------------
3138 sal_Bool SvtFileDialog::setShowState( sal_Bool /*bShowState*/ )
3139 {
3140     // #97633 for the system filedialog it's
3141     // usefull to make the preview switchable
3142     // because the preview occupies
3143     // half of the size of the file listbox
3144     // which is not the case here,
3145     // so we (TRA/FS) decided not to make
3146     // the preview window switchable because
3147     // else we would have to change the layout
3148     // of the file dialog dynamically
3149     // support for set/getShowState is opionally
3150     // see com::sun::star::ui::dialogs::XFilePreview
3151     /*
3152     if ( _pPrevBmp )
3153     {
3154         _pPrevBmp->Show( bShowState );
3155         return sal_True;
3156     }
3157     else
3158         return sal_False;
3159     */
3160 
3161     return sal_False;
3162 }
3163 
3164 // -----------------------------------------------------------------------
3165 String SvtFileDialog::getCurrentFileText( ) const
3166 {
3167     String sReturn;
3168     if ( _pImp && _pImp->_pEdFileName )
3169         sReturn = _pImp->_pEdFileName->GetText();
3170     return sReturn;
3171 }
3172 
3173 // -----------------------------------------------------------------------
3174 void SvtFileDialog::setCurrentFileText( const String& _rText, bool _bSelectAll )
3175 {
3176     if ( _pImp && _pImp->_pEdFileName )
3177     {
3178         _pImp->_pEdFileName->SetText( _rText );
3179         if ( _bSelectAll )
3180             _pImp->_pEdFileName->SetSelection( Selection( 0, _rText.Len() ) );
3181     }
3182 }
3183 
3184 // -----------------------------------------------------------------------
3185 sal_Bool SvtFileDialog::isAutoExtensionEnabled()
3186 {
3187     return _pImp->_pCbAutoExtension && _pImp->_pCbAutoExtension->IsChecked();
3188 }
3189 
3190 // -----------------------------------------------------------------------
3191 sal_Bool SvtFileDialog::getShowState()
3192 {
3193     if ( _pPrevBmp )
3194         return _pPrevBmp->IsVisible();
3195     else
3196         return sal_False;
3197 }
3198 
3199 // -----------------------------------------------------------------------
3200 void SvtFileDialog::ReleaseOwnerShip( Window* pUserControl )
3201 
3202 /*
3203   [Beschreibung]
3204   Die Methode sorgt dafuer das das spezifizierte Element nicht mehr im Besitz
3205   der Instanz ist.
3206 */
3207 
3208 {
3209     ControlChain_Impl* pElement = _pUserControls;
3210     while ( pElement )
3211     {
3212         if ( pElement->_pControl == pUserControl )
3213         {
3214             pElement->_bHasOwnerShip = sal_False;
3215             break;
3216         }
3217         pElement = pElement->_pNext;
3218     }
3219 }
3220 
3221 //***************************************************************************
3222 
3223 sal_Bool SvtFileDialog::AddControl( Window* pControl, sal_Bool bNewLine )
3224 {
3225     // control already exists
3226     ControlChain_Impl* pElement = _pUserControls;
3227     while ( pElement )
3228     {
3229         if ( pElement->_pControl == pControl )
3230             return sal_False;
3231         pElement = pElement->_pNext;
3232     }
3233 
3234     // Check if controls have already been added.
3235     Size aNewControlSize( pControl->GetOutputSizePixel() );
3236     Size aDlgSize( GetOutputSizePixel() );
3237     WindowType nType = pControl->GetType();
3238     if ( !aNewControlSize.Height() )
3239     {
3240         // Detect a size.
3241         Size aSize( 0, 10 );
3242         if ( nType == WINDOW_PUSHBUTTON )
3243         {
3244             Size aDefSiz = LogicToPixel( Size( 50, 14 ), MAP_APPFONT );
3245             long nTextWidth = pControl->GetTextWidth( pControl->GetText() );
3246             aSize.Width() = nTextWidth + WIDTH_ADDITION;
3247 
3248             // PushButton:  Mindestbreite 50 logische Einheiten,
3249             //              H"ohe immer 14 logische Einheiten
3250             if ( aDefSiz.Width() > aSize.Width() )
3251                 aSize.Width() = aDefSiz.Width();
3252             aSize.Height() = aDefSiz.Height();
3253             aNewControlSize = aSize;
3254         }
3255         else
3256             aNewControlSize = LogicToPixel( aSize, MAP_APPFONT );
3257         if ( nType != WINDOW_PUSHBUTTON )
3258             aNewControlSize.Width() = pControl->GetTextWidth( pControl->GetText() ) + WIDTH_ADDITION;
3259         if ( nType == WINDOW_CHECKBOX )
3260             aNewControlSize.Width() += WIDTH_ADDITION;
3261         if ( nType == WINDOW_WINDOW )
3262         {
3263             aNewControlSize.Height() = GetOutputSizePixel().Height() - 18;
3264             aNewControlSize.Width() = 200;
3265             aDlgSize.Width() += 210;
3266             SetOutputSizePixel( aDlgSize );
3267         }
3268         pControl->SetOutputSizePixel( aNewControlSize );
3269     }
3270     Point aNewControlPos;
3271     Size* pNewDlgSize = NULL;
3272     sal_Bool bNewRow = bNewLine;
3273     sal_Bool bFirstNewRow = sal_False;
3274 
3275     if ( nType == WINDOW_WINDOW )
3276     {
3277         aNewControlPos.X() = aDlgSize.Width() - 210;
3278         aNewControlPos.Y() = 8;
3279     }
3280     else if ( _pUserControls )
3281     {
3282         Point aNewControlRange( _pUserControls->_pControl->GetPosPixel() );
3283         long nPrevControlHeight = _pUserControls->_pControl->GetSizePixel().Height();
3284         aNewControlRange +=
3285             Point( _pUserControls->_pControl->GetOutputSizePixel().Width(), 0 );
3286         aNewControlPos = aNewControlRange;
3287         if ( nPrevControlHeight > aNewControlSize.Height() )
3288         {
3289             long nY = nPrevControlHeight;
3290             nY -= aNewControlSize.Height();
3291             nY /= 2;
3292             aNewControlPos.Y() += nY;
3293         }
3294         aNewControlPos += LogicToPixel( Point( 3, 0 ), MAP_APPFONT );
3295         aNewControlRange += LogicToPixel( Point( 9, 0 ), MAP_APPFONT );
3296         aNewControlRange += Point( aNewControlSize.Width(), 0 );
3297 
3298         // Check if a new row has to be created.
3299         if ( aNewControlRange.X() > aDlgSize.Width() )
3300             bNewRow = sal_True;
3301     }
3302     else
3303     {
3304         // Create a new row if there was no usercontrol before.
3305         bNewRow = sal_True;
3306         bFirstNewRow = sal_True;
3307     }
3308 
3309     // Check if a new row has to be created.
3310     Size aBorderSize = LogicToPixel( Size( 6, 6 ), MAP_APPFONT );
3311     long nLeftBorder = aBorderSize.Width();
3312     long nLowerBorder = aBorderSize.Height();
3313     if ( bNewRow )
3314     {
3315         // Set control at the beginning of a new line.
3316         long nSmallBorderHeight = nLowerBorder / 2;
3317         aNewControlPos = Point( nLeftBorder, 0 );
3318         aNewControlPos += Point( 0, aDlgSize.Height() );
3319         aNewControlPos.Y() -= nSmallBorderHeight;
3320         // Set new size.
3321         pNewDlgSize = new Size( aDlgSize );
3322         pNewDlgSize->Height() -= nSmallBorderHeight;
3323         pNewDlgSize->Height() += aNewControlSize.Height();
3324         pNewDlgSize->Height() += nLowerBorder;
3325     }
3326     else
3327     {
3328         // Check if the window has to be resized.
3329         Size aNewControlRange( 0, aNewControlPos.Y() );
3330         aNewControlRange.Height() += aNewControlSize.Height();
3331         aNewControlRange.Height() += nLowerBorder;
3332         if ( aNewControlRange.Height() > aDlgSize.Height() )
3333             pNewDlgSize = new Size( aDlgSize.Width(), aNewControlRange.Height() );
3334     }
3335 
3336     // Update view.
3337     if ( pNewDlgSize )
3338     {
3339         SetOutputSizePixel( *pNewDlgSize );
3340         delete pNewDlgSize;
3341     }
3342     pControl->SetPosPixel( aNewControlPos );
3343     pControl->Show();
3344     _pUserControls = new ControlChain_Impl( pControl, _pUserControls );
3345 
3346     return sal_True;
3347 }
3348 
3349 sal_Bool SvtFileDialog::ContentHasParentFolder( const rtl::OUString& rURL )
3350 {
3351     m_aContent.bindTo( rURL );
3352 
3353     if ( m_aContent.isInvalid() )
3354         return sal_False;
3355 
3356     return m_aContent.hasParentFolder( ) && m_aContent.isValid();
3357 }
3358 
3359 sal_Bool SvtFileDialog::ContentCanMakeFolder( const rtl::OUString& rURL )
3360 {
3361     m_aContent.bindTo( rURL );
3362 
3363     if ( m_aContent.isInvalid() )
3364         return sal_False;
3365 
3366     return m_aContent.canCreateFolder( ) && m_aContent.isValid();
3367 }
3368 
3369 sal_Bool SvtFileDialog::ContentGetTitle( const rtl::OUString& rURL, String& rTitle )
3370 {
3371     m_aContent.bindTo( rURL );
3372 
3373     if ( m_aContent.isInvalid() )
3374         return sal_False;
3375 
3376     ::rtl::OUString sTitle;
3377     m_aContent.getTitle( sTitle );
3378     rTitle = sTitle;
3379 
3380     return m_aContent.isValid();
3381 }
3382 
3383 void SvtFileDialog::appendDefaultExtension(String& _rFileName,
3384                                            const String& _rFilterDefaultExtension,
3385                                            const String& _rFilterExtensions)
3386 {
3387     String aTemp(_rFileName);
3388     aTemp.ToLowerAscii();
3389     String aType(_rFilterExtensions);
3390     aType.ToLowerAscii();
3391 
3392     if ( ! aType.EqualsAscii(FILEDIALOG_FILTER_ALL) )
3393     {
3394         sal_uInt16 nWildCard = aType.GetTokenCount( FILEDIALOG_DEF_EXTSEP );
3395         sal_uInt16 nIndex, nPos = 0;
3396 
3397         for ( nIndex = 0; nIndex < nWildCard; nIndex++ )
3398         {
3399             String aExt(aType.GetToken( 0, FILEDIALOG_DEF_EXTSEP, nPos ));
3400             // take care of a leading *
3401             sal_uInt16 nExtOffset = (aExt.GetBuffer()[0] == '*' ? 1 : 0);
3402             sal_Unicode* pExt = aExt.GetBufferAccess() + nExtOffset;
3403             xub_StrLen nExtLen = aExt.Len() - nExtOffset;
3404             xub_StrLen nOffset = aTemp.Len() - nExtLen;
3405             // minimize search by starting at last possible index
3406             if ( aTemp.Search(pExt, nOffset) == nOffset )
3407                 break;
3408         }
3409 
3410         if ( nIndex >= nWildCard )
3411         {
3412             _rFileName += '.';
3413             _rFileName += _rFilterDefaultExtension;
3414         }
3415     }
3416 }
3417 
3418 // -----------------------------------------------------------------------
3419 
3420 // QueryFolderNameDialog -------------------------------------------------------
3421 
3422 namespace svtools {
3423 
3424 QueryFolderNameDialog::QueryFolderNameDialog
3425 (
3426     Window* _pParent,
3427     const String& rTitle,
3428     const String& rDefaultText,
3429     String* pGroupName
3430 ) :
3431     ModalDialog( _pParent, SvtResId( DLG_SVT_QUERYFOLDERNAME ) ),
3432 
3433     aNameText   ( this, SvtResId( FT_SVT_QUERYFOLDERNAME_DLG_NAME ) ),
3434     aNameEdit   ( this, SvtResId( ED_SVT_QUERYFOLDERNAME_DLG_NAME ) ),
3435     aNameLine   ( this, SvtResId( FL_SVT_QUERYFOLDERNAME_DLG_NAME ) ),
3436     aOKBtn      ( this, SvtResId( BT_SVT_QUERYFOLDERNAME_DLG_OK ) ),
3437     aCancelBtn  ( this, SvtResId( BT_SVT_QUERYFOLDERNAME_DLG_CANCEL ) )
3438 {
3439     FreeResource();
3440     SetText( rTitle );
3441     aNameEdit.SetText( rDefaultText );
3442     aNameEdit.SetSelection( Selection( 0, rDefaultText.Len() ) );
3443     aOKBtn.SetClickHdl( LINK( this, QueryFolderNameDialog, OKHdl ) );
3444     aNameEdit.SetModifyHdl( LINK( this, QueryFolderNameDialog, NameHdl ) );
3445 
3446     if ( pGroupName )
3447         aNameLine.SetText( *pGroupName );
3448 };
3449 
3450 // -----------------------------------------------------------------------
3451 IMPL_LINK( QueryFolderNameDialog, OKHdl, Button *, EMPTYARG )
3452 {
3453     // trim the strings
3454     aNameEdit.SetText( aNameEdit.GetText().EraseLeadingChars().EraseTrailingChars() );
3455     EndDialog( RET_OK );
3456     return 1;
3457 }
3458 
3459 // -----------------------------------------------------------------------
3460 IMPL_LINK( QueryFolderNameDialog, NameHdl, Edit *, EMPTYARG )
3461 {
3462     // trim the strings
3463     String aName = aNameEdit.GetText();
3464     aName.EraseLeadingChars().EraseTrailingChars();
3465     if ( aName.Len() )
3466     {
3467         if ( !aOKBtn.IsEnabled() )
3468             aOKBtn.Enable( sal_True );
3469     }
3470     else
3471     {
3472         if ( aOKBtn.IsEnabled() )
3473             aOKBtn.Enable( sal_False );
3474     }
3475 
3476     return 0;
3477 }
3478 
3479 }
3480