xref: /AOO41X/main/sc/inc/global.hxx (revision 38d50f7b14e1cf975d8c6468d9633894cd59b523)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



#ifndef SC_SCGLOB_HXX
#define SC_SCGLOB_HXX

#include "address.hxx"
#include <i18npool/lang.h>
#include <tools/stream.hxx>
#include <osl/endian.h>
#include <com/sun/star/uno/Reference.hxx>
#include "scdllapi.h"

#include <hash_map>

class ImageList;
class Bitmap;
class SfxItemSet;
class Color;

// Macro fuer den Call-Profiler unter WinNT
// mit S_CAP kann eine Messung gestarted, mit E_CAP wieder gestoppt werden
#if defined( WNT ) && defined( PROFILE )

extern "C" {
	void StartCAP();
	void StopCAP();
	void DumpCAP();
};

#define S_CAP	StartCAP();
#define E_CAP	StopCAP(); DumpCAP();

#endif

#if 0
// I18N doesn't get this right, can't specify more than one to ignore
#define SC_COLLATOR_IGNORES ( \
	::com::sun::star::i18n::CollatorOptions::CollatorOptions_IGNORE_CASE | \
	::com::sun::star::i18n::CollatorOptions::CollatorOptions_IGNORE_KANA | \
	::com::sun::star::i18n::CollatorOptions::CollatorOptions_IGNORE_WIDTH )
#else
#define SC_COLLATOR_IGNORES ( \
	::com::sun::star::i18n::CollatorOptions::CollatorOptions_IGNORE_CASE )
#endif
#if 0
// #107998# Don't ignore Width and Kana. The issue was mainly with AutoInput,
// but affects also comparison of names in general.
#define SC_TRANSLITERATION_IGNORECASE ( \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_CASE | \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_KANA | \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_WIDTH )
#define SC_TRANSLITERATION_CASESENSE ( \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_KANA | \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_WIDTH )
#else
#define SC_TRANSLITERATION_IGNORECASE ( \
    ::com::sun::star::i18n::TransliterationModules_IGNORE_CASE )
#define SC_TRANSLITERATION_CASESENSE 0
#endif

//------------------------------------------------------------------------

//	die 1000 Namen des Calc...
//	Clipboard-Namen sind jetzt in so3/soapp.hxx
//	STRING_SCAPP war "scalc3", "scalc4", jetzt nur noch "scalc"

#define STRING_SCAPP	"scalc"
#define	STRING_SCSTREAM	"StarCalcDocument"

#define	STRING_STANDARD	"Standard"

// characters -----------------------------------------------------------------

//	'\r' geht auf'm Mac nicht...
#define CHAR_CR		char(13)

const sal_Unicode CHAR_NBSP     = 0x00A0;
const sal_Unicode CHAR_SHY      = 0x00AD;
const sal_Unicode CHAR_ZWSP     = 0x200B;
const sal_Unicode CHAR_LRM      = 0x200E;
const sal_Unicode CHAR_RLM      = 0x200F;
const sal_Unicode CHAR_NBHY     = 0x2011;
const sal_Unicode CHAR_ZWNBSP   = 0x2060;

// ----------------------------------------------------------------------------

#define	MINDOUBLE	1.7e-307
#define	MAXDOUBLE	1.7e307

#define MINZOOM 	20
#define MAXZOOM 	400

#ifdef SC_ROWLIMIT_TYPECONVERSION_NOCONVPASS
const size_t MAXSUBTOTAL        = 3;
const size_t MAXQUERY           = 8;
#else
const SCSIZE MAXSUBTOTAL        = 3;
const SCSIZE MAXQUERY           = 8;
#endif

#define SC_START_INDEX_DB_COLL 50000
										// Oberhalb dieser Grenze liegen
										// die Indizes fuer DBBereiche

/*
#ifdef OS2
#define PIXEL_PER_INCH      72.0
#else
#define PIXEL_PER_INCH      96.0
#endif
*/

#define PIXEL_PER_INCH      96.0

#define CM_PER_INCH         2.54
#define POINTS_PER_INCH		72.27
#define PIXEL_PER_POINT		(PIXEL_PER_INCH / POINTS_PER_INCH)
#define INCHT_PER_CM		(1.0 / CM_PER_INCH)
#define POINTS_PER_CM		(POINTS_PER_INCH / CM_PER_INCH)
#define TWIPS_PER_POINT		20.0
#define TWIPS_PER_INCH		(TWIPS_PER_POINT * POINTS_PER_INCH)
#define TWIPS_PER_CM		(TWIPS_PER_INCH / CM_PER_INCH)
#define CM_PER_TWIPS		(CM_PER_INCH / TWIPS_PER_INCH)
#define TWIPS_PER_PIXEL		(TWIPS_PER_INCH / PIXEL_PER_INCH)
#define TWIPS_PER_CHAR		(TWIPS_PER_INCH / 13.6)
#define PIXEL_PER_TWIPS		(PIXEL_PER_INCH / TWIPS_PER_INCH)
#define HMM_PER_TWIPS		(CM_PER_TWIPS * 1000.0)

#define STD_COL_WIDTH		1285
#define STD_EXTRA_WIDTH		113		// 2mm Extra fuer optimale Breite
									// Standard Zeilenhoehe: Text + Rand - STD_ROWHEIGHT_DIFF


#define MAX_EXTRA_WIDTH  	23811	// 42cm in TWIPS
#define MAX_EXTRA_HEIGHT	23811
#define MAX_COL_WIDTH		56693	// 1m in TWIPS
#define MAX_COL_HEIGHT		56693

#define STD_ROWHEIGHT_DIFF	23
#define STD_FONT_HEIGHT		200 	// entspricht 10 Punkt

//!		statt STD_ROW_HEIGHT ScGlobal::nStdRowHeight benutzen !

#define STD_ROW_HEIGHT		(12.8 * TWIPS_PER_POINT) 			// 256 Twips, 0.45 cm

									// Standardgroesse als Ole-Server (Zellen)
#define OLE_STD_CELLS_X		4
#define OLE_STD_CELLS_Y		5

#define SC_SIZE_OPTIMUM		0xFFFF

									// Update-Flags
#define UF_SCROLL_LEFT		1
#define UF_SCROLL_RIGHT		2
#define UF_SCROLL_UP		4
#define UF_SCROLL_DOWN		8
#define UF_ROW				16
#define UF_VIEW				32

									// Repaint-Flags (fuer Messages)
#define PAINT_GRID			1
#define PAINT_TOP			2
#define PAINT_LEFT			4
#define PAINT_EXTRAS		8
#define PAINT_INVERT		16
#define PAINT_MARKS			32
#define PAINT_OBJECTS		64
#define PAINT_SIZE			128
#define PAINT_ALL			( PAINT_GRID | PAINT_TOP | PAINT_LEFT | PAINT_EXTRAS | PAINT_OBJECTS | PAINT_SIZE )


									// Flags fuer Spalten / Zeilen
									// FILTERED immer zusammen mit HIDDEN
									// FILTERED und MANUALSIZE nur fuer Zeilen moeglich
const sal_uInt8   CR_HIDDEN      = 1;
//const sal_uInt8 CR_MARKED      = 2;
//const sal_uInt8 CR_PAGEBREAK   = 4;
const sal_uInt8   CR_MANUALBREAK = 8;
const sal_uInt8   CR_FILTERED    = 16;
const sal_uInt8   CR_MANUALSIZE  = 32;
const sal_uInt8   CR_ALL         = (CR_HIDDEN | CR_MANUALBREAK | CR_FILTERED | CR_MANUALSIZE);

typedef sal_uInt8 ScBreakType;
const ScBreakType BREAK_NONE   = 0;
const ScBreakType BREAK_PAGE   = 1;
const ScBreakType BREAK_MANUAL = 2;

// Insert-/Delete-Flags
const sal_uInt16 IDF_NONE       = 0x0000;
const sal_uInt16 IDF_VALUE      = 0x0001;   /// Numeric values (and numeric results if IDF_FORMULA is not set).
const sal_uInt16 IDF_DATETIME   = 0x0002;   /// Dates, times, datetime values.
const sal_uInt16 IDF_STRING     = 0x0004;   /// Strings (and string results if IDF_FORMULA is not set).
const sal_uInt16 IDF_NOTE       = 0x0008;   /// Cell notes.
const sal_uInt16 IDF_FORMULA    = 0x0010;   /// Formula cells.
const sal_uInt16 IDF_HARDATTR   = 0x0020;   /// Hard cell attributes.
const sal_uInt16 IDF_STYLES     = 0x0040;   /// Cell styles.
const sal_uInt16 IDF_OBJECTS    = 0x0080;   /// Drawing objects.
const sal_uInt16 IDF_EDITATTR   = 0x0100;   /// Rich-text attributes.
const sal_uInt16 IDF_ATTRIB     = IDF_HARDATTR | IDF_STYLES;
const sal_uInt16 IDF_CONTENTS   = IDF_VALUE | IDF_DATETIME | IDF_STRING | IDF_NOTE | IDF_FORMULA;
const sal_uInt16 IDF_ALL        = IDF_CONTENTS | IDF_ATTRIB | IDF_OBJECTS;
const sal_uInt16 IDF_NOCAPTIONS = 0x0200;   /// Internal use only (undo etc.): do not copy/delete caption objects of cell notes.
const sal_uInt16 IDF_ADDNOTES   = 0x0400;   /// Internal use only (copy from clip): do not delete existing cell contents when pasting notes.

/// Copy flags for auto/series fill functions: do not touch notes and drawing objects.
const sal_uInt16 IDF_AUTOFILL   = IDF_ALL & ~(IDF_NOTE | IDF_OBJECTS);

#define PASTE_NOFUNC		0
#define PASTE_ADD			1
#define PASTE_SUB			2
#define PASTE_MUL			3
#define PASTE_DIV			4

#define PASTE_NONEMPTY		5

										// Bits fuer HasAttr
#define HASATTR_LINES			1
#define HASATTR_MERGED			2
#define HASATTR_OVERLAPPED		4
#define HASATTR_PROTECTED		8
#define HASATTR_SHADOW			16
#define HASATTR_NEEDHEIGHT		32
#define HASATTR_SHADOW_RIGHT	64
#define HASATTR_SHADOW_DOWN		128
#define HASATTR_AUTOFILTER		256
#define HASATTR_CONDITIONAL		512
#define HASATTR_ROTATE			1024
#define HASATTR_NOTOVERLAPPED	2048
#define HASATTR_RTL				4096
#define HASATTR_RIGHTORCENTER   8192    // right or centered logical alignment

#define HASATTR_PAINTEXT		( HASATTR_LINES | HASATTR_SHADOW | HASATTR_CONDITIONAL )


#define EMPTY_STRING ScGlobal::GetEmptyString()

										//	Layer-ID's fuer Drawing
#define SC_LAYER_FRONT		0
#define SC_LAYER_BACK		1
#define SC_LAYER_INTERN		2
#define SC_LAYER_CONTROLS	3
#define SC_LAYER_HIDDEN     4

										//	Tabellen linken
#define SC_LINK_NONE		0
#define SC_LINK_NORMAL		1
#define SC_LINK_VALUE		2

										//	Eingabe
#define SC_ENTER_NORMAL		0
#define SC_ENTER_BLOCK		1
#define SC_ENTER_MATRIX		2

										//	Step = 10pt, max. Einzug = 100 Schritte
#define SC_INDENT_STEP		200
#define SC_MAX_INDENT		20000

										//	Szenario-Flags
#define SC_SCENARIO_COPYALL		1
#define SC_SCENARIO_SHOWFRAME	2
#define SC_SCENARIO_PRINTFRAME	4
#define SC_SCENARIO_TWOWAY		8
#define SC_SCENARIO_ATTRIB		16
#define SC_SCENARIO_VALUE		32
#define SC_SCENARIO_PROTECT		64


#ifndef DELETEZ
#define DELETEZ(pPtr) { delete pPtr; pPtr = 0; }
#endif

									// Ist Bit in Set gesetzt?
#define IS_SET(bit,set)(((set)&(bit))==(bit))

#define SEL_ALL			-1	// Eingabezeile: alles Selektieren
#define RES_CANCEL		0	// Resultate der Funk.AutoPilot-Seiten
#define RES_BACKWARD	1
#define RES_END			2

enum CellType
	{
		CELLTYPE_NONE,
		CELLTYPE_VALUE,
		CELLTYPE_STRING,
		CELLTYPE_FORMULA,
		CELLTYPE_NOTE,
		CELLTYPE_EDIT,
		CELLTYPE_SYMBOLS 		// fuer Laden/Speichern
#if DBG_UTIL
   		,CELLTYPE_DESTROYED
#endif
	};

enum DelCellCmd
	{
		DEL_CELLSUP,
		DEL_CELLSLEFT,
		DEL_DELROWS,
		DEL_DELCOLS,
		DEL_NONE
	};

enum InsCellCmd
	{
		INS_CELLSDOWN,
		INS_CELLSRIGHT,
		INS_INSROWS,
		INS_INSCOLS,
		INS_NONE
	};

enum UpdateRefMode
	{
		URM_INSDEL,
		URM_COPY,
		URM_MOVE,
		URM_REORDER
	};

enum FillDir
	{
		FILL_TO_BOTTOM,
		FILL_TO_RIGHT,
		FILL_TO_TOP,
		FILL_TO_LEFT
	};

enum FillCmd
	{
		FILL_SIMPLE,
		FILL_LINEAR,
		FILL_GROWTH,
		FILL_DATE,
		FILL_AUTO
	};

enum FillDateCmd
	{
		FILL_DAY,
		FILL_WEEKDAY,
		FILL_MONTH,
		FILL_YEAR
	};

enum ScDirection
	{
		DIR_BOTTOM,
		DIR_RIGHT,
		DIR_TOP,
		DIR_LEFT
	};

enum ScSizeMode
	{
		SC_SIZE_DIRECT,				// set size or hide if value is 0
		SC_SIZE_OPTIMAL,			// set optimal size for everything
		SC_SIZE_SHOW,				// show with original size
		SC_SIZE_VISOPT,				// set optimal size only if visible
		SC_SIZE_ORIGINAL			// only set size, don't change visible flag
	};

enum ScInputMode
	{
		SC_INPUT_NONE,
		SC_INPUT_TYPE,				// Eingabe, ohne im Inplace-Modus zu sein
		SC_INPUT_TABLE,				// Textcursor in der Tabelle
		SC_INPUT_TOP				// Textcursor in der Eingabezeile
	};

enum ScVObjMode						// Ausgabemodi von Objekten auf einer Seite
{
	VOBJ_MODE_SHOW,
	VOBJ_MODE_HIDE
	// #i80528# VOBJ_MODE_DUMMY removed, no longer supported
};

enum ScAnchorType 					// Verankerung eines Zeichenobjekts
{
	SCA_CELL,
	SCA_PAGE,
	SCA_DONTKNOW 					// bei Mehrfachselektion
};

enum ScGetDBMode
{
	SC_DB_MAKE,		// wenn noetig, "unbenannt" anlegen
	SC_DB_IMPORT,	// wenn noetig, "Importx" anlegen
	SC_DB_OLD		// nicht neu anlegen
};

/// For ScDBFunc::GetDBData()
enum ScGetDBSelection
{
    /** Keep selection as is, expand to used data area if no selection. */
    SC_DBSEL_KEEP,

    /** Shrink selection to sheet's data area. */
    SC_DBSEL_SHRINK_TO_SHEET_DATA,

    /** Shrink selection to actually used data area within the selection. */
    SC_DBSEL_SHRINK_TO_USED_DATA,

    /** If only one row or portion thereof is selected, shrink row to used data
        columns and select further rows down until end of data. If an area is
        selected, shrink rows to actually used columns. Else, no selection,
        expand to used data area. */
    SC_DBSEL_ROW_DOWN,

    /** Behave as if the range corresponding to a ScDBData area was selected,
        for API use. */
    SC_DBSEL_FORCE_MARK
};

enum ScLkUpdMode
{					//Verknuepfungen
	LM_ALWAYS,		//immer aktualisieren
	LM_NEVER,		//niemals
	LM_ON_DEMAND,	//auf nachfrage
	LM_UNKNOWN		//Shit happens
};


// -----------------------------------------------------------------------

//==================================================================

// -----------------------------------------------------------------------

// enum with values equal to old DBObject enum from sdb
enum ScDBObject
{
	ScDbTable,
	ScDbQuery
};

struct ScImportParam
{
	SCCOL			nCol1;
	SCROW			nRow1;
	SCCOL			nCol2;
	SCROW			nRow2;
	sal_Bool			bImport;
	String			aDBName;					// Alias der Datenbank
	String			aStatement;
	sal_Bool			bNative;
	sal_Bool			bSql;						// Statement oder Name?
	sal_uInt8			nType;						// enum DBObject

	ScImportParam();
	ScImportParam( const ScImportParam& r );
	~ScImportParam();

	ScImportParam&	operator=	( const ScImportParam& r );
	sal_Bool			operator==	( const ScImportParam& r ) const;
//UNUSED2009-05 void			Clear		();
};

struct ScStringHashCode
{
    size_t operator()( const String& rStr ) const
    {
        return rtl_ustr_hashCode_WithLength( rStr.GetBuffer(), rStr.Len() );
    }
};

// -----------------------------------------------------------------------

class ScDocument;
class ScDocShell;
class ScDocShellRef;
class SvxSearchItem;
class ScAutoFormat;
class FuncCollection;
class ScUnoAddInCollection;
class ScUserList;
class SvxBrushItem;
class ScFunctionList;
class ScFunctionMgr;
class SfxItemPool;
class SdrModel;
class EditTextObject;
class SfxObjectShell;
class SvNumberFormatter;
class ScUnitConverter;
class CharClass;
class LocaleDataWrapper;
class SvtSysLocale;
class CalendarWrapper;
class CollatorWrapper;
class IntlWrapper;
class OutputDevice;

namespace com { namespace sun { namespace star {
    namespace lang {
        struct Locale;
    }
    namespace i18n {
        class XOrdinalSuffix;
    }
}}}
namespace utl {
    class TransliterationWrapper;
}

#ifndef _SCALC_EXE
class ScGlobal
{
	static SvxSearchItem*	pSearchItem;
	static ScAutoFormat*	pAutoFormat;
	static FuncCollection*	pFuncCollection;
	static ScUnoAddInCollection* pAddInCollection;
	static ScUserList*		pUserList;
	static String**			ppRscString;
	static String* 			pStrScDoc;
	static String*          pEmptyString;
	static String*			pStrClipDocName;
	static SvxBrushItem*    pEmptyBrushItem;
	static SvxBrushItem*	pButtonBrushItem;
	static SvxBrushItem*	pEmbeddedBrushItem;
	static SvxBrushItem*	pProtectedBrushItem;

    static ImageList*       pOutlineBitmaps;
    static ImageList*       pOutlineBitmapsHC;

//	static Bitmap*			pAnchorBitmap;
//	static Bitmap*			pGrayAnchorBitmap;

	static ScFunctionList*	pStarCalcFunctionList;
	static ScFunctionMgr*	pStarCalcFunctionMgr;

	static ScUnitConverter*	pUnitConverter;

    static  SvNumberFormatter*  pEnglishFormatter;          // for UNO / XML export

    static ::com::sun::star::uno::Reference< ::com::sun::star::i18n::XOrdinalSuffix> xOrdinalSuffix;
    static CalendarWrapper*		pCalendar;
    static CollatorWrapper*		pCaseCollator;
    static CollatorWrapper*		pCollator;
    static ::utl::TransliterationWrapper* pTransliteration;
    static ::utl::TransliterationWrapper* pCaseTransliteration;
    static IntlWrapper*         pScIntlWrapper;
    static ::com::sun::star::lang::Locale*		pLocale;

public:
    static SvtSysLocale*        pSysLocale;
    // for faster access a pointer to the single instance provided by SvtSysLocale
    SC_DLLPUBLIC static const CharClass*     pCharClass;
    // for faster access a pointer to the single instance provided by SvtSysLocale
    SC_DLLPUBLIC static const LocaleDataWrapper* pLocaleData;
    SC_DLLPUBLIC static const LocaleDataWrapper* GetpLocaleData();

    static CalendarWrapper*     GetCalendar();
    SC_DLLPUBLIC static CollatorWrapper*		GetCollator();
    static CollatorWrapper*		GetCaseCollator();
    static IntlWrapper*         GetScIntlWrapper();
    static ::com::sun::star::lang::Locale*		GetLocale();

    SC_DLLPUBLIC static ::utl::TransliterationWrapper* GetpTransliteration(); //CHINA001
    static ::utl::TransliterationWrapper* GetCaseTransliteration();

    SC_DLLPUBLIC static LanguageType	   		eLnge;
	static sal_Unicode			cListDelimiter;

	static const String&	 	GetClipDocName();
	static void 			 	SetClipDocName( const String& rNew );
	SC_DLLPUBLIC static const SvxSearchItem&	GetSearchItem();
	SC_DLLPUBLIC static void					SetSearchItem( const SvxSearchItem& rNew );
    SC_DLLPUBLIC static ScAutoFormat*		GetAutoFormat();
	static void					ClearAutoFormat(); //BugId 54209
	static FuncCollection*		GetFuncCollection();
    SC_DLLPUBLIC static ScUnoAddInCollection* GetAddInCollection();
    SC_DLLPUBLIC static ScUserList*			GetUserList();
	static void					SetUserList( const ScUserList* pNewList );
    SC_DLLPUBLIC static const String&		GetRscString( sal_uInt16 nIndex );
	static void					OpenURL( const String& rURL, const String& rTarget );
    SC_DLLPUBLIC static String				GetAbsDocName( const String& rFileName,
												SfxObjectShell* pShell );
    SC_DLLPUBLIC static String				GetDocTabName( const String& rFileName,
												const String& rTabName );
    SC_DLLPUBLIC static sal_uLong				GetStandardFormat( SvNumberFormatter&,
									sal_uLong nFormat, short nType );
    SC_DLLPUBLIC static sal_uLong				GetStandardFormat( double, SvNumberFormatter&,
									sal_uLong nFormat, short nType );

    SC_DLLPUBLIC static double				nScreenPPTX;
    SC_DLLPUBLIC static double				nScreenPPTY;

	static ScDocShellRef*	pDrawClipDocShellRef;

	static sal_uInt16			nDefFontHeight;
	static sal_uInt16			nStdRowHeight;

    SC_DLLPUBLIC static long				nLastRowHeightExtra;
	static long				nLastColWidthExtra;

	static void             Init();						// am Anfang
	static void             InitAddIns();
	static void				Clear();					// bei Programmende

	static void				UpdatePPT(OutputDevice* pDev);

	static void             InitTextHeight(SfxItemPool* pPool);
	static SvxBrushItem*	GetEmptyBrushItem()	{ return pEmptyBrushItem; }
    static SvxBrushItem*    GetButtonBrushItem();
	static SvxBrushItem*	GetEmbeddedBrushItem()	{ return pEmbeddedBrushItem; }
	static SvxBrushItem*	GetProtectedBrushItem()	{ return pProtectedBrushItem; }
    SC_DLLPUBLIC    static const String&	GetEmptyString();
	static const String& 	GetScDocString();

    /** Returns the specified image list with outline symbols.
        @param bHC  false = standard symbols; true = high contrast symbols. */
    static ImageList*       GetOutlineSymbols( bool bHC );

//	static const Bitmap&	GetAnchorBitmap();
//	static const Bitmap&	GetGrayAnchorBitmap();

    static bool             HasStarCalcFunctionList();
	static ScFunctionList*	GetStarCalcFunctionList();
	static ScFunctionMgr*	GetStarCalcFunctionMgr();
    static void             ResetFunctionList();

	static String			GetErrorString(sal_uInt16 nErrNumber);
	static String			GetLongErrorString(sal_uInt16 nErrNumber);
	static sal_Bool				EETextObjEqual( const EditTextObject* pObj1,
											const EditTextObject* pObj2 );
	static sal_Bool				CheckWidthInvalidate( sal_Bool& bNumFormatChanged,
												  const SfxItemSet& rNewAttrs,
												  const SfxItemSet& rOldAttrs );
	static sal_Bool				HasAttrChanged( const SfxItemSet& rNewAttrs,
											const SfxItemSet& rOldAttrs,
											const sal_uInt16	  nWhich );

	static ScUnitConverter*	GetUnitConverter();

	/// strchr() functionality on unicode, as long as we need it for ScToken etc.
	static const sal_Unicode* UnicodeStrChr( const sal_Unicode* pStr, sal_Unicode c );

	static inline sal_Unicode ToUpperAlpha( sal_Unicode c )
		{ return ( c >= 'a' && c <= 'z' ) ? ( c-'a'+'A' ) : c; }

    /** Adds the string rToken to rTokenList, using a list separator character.
        @param rTokenList  The string list where the token will be appended to.
        @param rToken  The token string to append to the token list.
        @param cSep  The character to separate the tokens.
        @param nSepCount  Specifies how often cSep is inserted between two tokens.
        @param bForceSep  true = Always insert separator; false = Only, if not at begin or end. */
    SC_DLLPUBLIC static void             AddToken(
                                String& rTokenList, const String& rToken,
                                sal_Unicode cSep, xub_StrLen nSepCount = 1,
                                bool bForceSep = false );

    /** Returns true, if the first and last character of the string is cQuote. */
    SC_DLLPUBLIC static bool             IsQuoted( const String& rString, sal_Unicode cQuote = '\'' );

    /** Inserts the character cQuote at beginning and end of rString.
        @param bEscapeEmbedded      If <TRUE/>, embedded quote characters are
                                    escaped by doubling them.
     */
SC_DLLPUBLIC    static void             AddQuotes( String& rString, sal_Unicode cQuote = '\'', bool bEscapeEmbedded = true );

    /** Erases the character cQuote from rString, if it exists at beginning AND end.
        @param bUnescapeEmbedded    If <TRUE/>, embedded doubled quote characters
                                    are unescaped by replacing them with a
                                    single instance.
     */
SC_DLLPUBLIC    static void             EraseQuotes( String& rString, sal_Unicode cQuote = '\'', bool bUnescapeEmbedded = true );

    /** Finds an unquoted instance of cChar in rString, starting at
        offset nStart. Unquoted instances may occur when concatenating two
        quoted strings with a separator, for example, 's1':'s2'. Embedded
        quotes have to be escaped by being doubled. Caller must ensure that
        nStart points into an unquoted range or the opening quote. Specialty:
        if cChar==cQuote the first cQuote character from nStart on is found.
        @returns offset if found, else STRING_NOTFOUND
     */
SC_DLLPUBLIC    static xub_StrLen       FindUnquoted( const String& rString, sal_Unicode cChar, xub_StrLen nStart = 0, sal_Unicode cQuote = '\'' );

    /** Finds an unquoted instance of cChar in null-terminated pString. Same
        semantics as FindUnquoted( const String&, ...)
        @returns: pointer to cChar if found, else NULL
     */
SC_DLLPUBLIC    static const sal_Unicode* FindUnquoted( const sal_Unicode* pString, sal_Unicode cChar, sal_Unicode cQuote = '\'' );


	static	CharSet			GetCharsetValue( const String& rCharSet );
	static	String			GetCharsetString( CharSet eVal );

    /// a "ReadOnly" formatter for UNO/XML export
    static  SvNumberFormatter*  GetEnglishFormatter();

	static sal_Bool IsSystemRTL();						// depending on system language
	static LanguageType GetEditDefaultLanguage();	// for EditEngine::SetDefaultLanguage
    SC_DLLPUBLIC static sal_uInt8	GetDefaultScriptType();				// for all WEAK characters
    /** Map ATTR_((CJK|CTL)_)?FONT_... to proper WhichIDs.
        If more than one SCRIPTTYPE_... values are or'ed together, prefers
        first COMPLEX, then ASIAN */
    SC_DLLPUBLIC static sal_uInt16 GetScriptedWhichID( sal_uInt8 nScriptType, sal_uInt16 nWhich );

    /** Adds a language item to the item set, if the number format item contains
        a language that differs from its parent's language. */
    SC_DLLPUBLIC static void             AddLanguage( SfxItemSet& rSet, SvNumberFormatter& rFormatter );

    /** Obtain the ordinal suffix for a number according to the system locale */
    static String           GetOrdinalSuffix( sal_Int32 nNumber);
};
#endif

//==================================================================
// evtl. in dbdata.hxx auslagern (?):

enum ScQueryOp
	{
		SC_EQUAL,
		SC_LESS,
		SC_GREATER,
		SC_LESS_EQUAL,
		SC_GREATER_EQUAL,
		SC_NOT_EQUAL,
		SC_TOPVAL,
		SC_BOTVAL,
		SC_TOPPERC,
        SC_BOTPERC,
        SC_CONTAINS,
        SC_DOES_NOT_CONTAIN,
        SC_BEGINS_WITH,
        SC_DOES_NOT_BEGIN_WITH,
        SC_ENDS_WITH,
        SC_DOES_NOT_END_WITH
	};

// -----------------------------------------------------------------------

enum ScQueryConnect
	{
		SC_AND,
		SC_OR
	};

// -----------------------------------------------------------------------

enum ScSubTotalFunc
	{
		SUBTOTAL_FUNC_NONE	= 0,
		SUBTOTAL_FUNC_AVE	= 1,
		SUBTOTAL_FUNC_CNT	= 2,
		SUBTOTAL_FUNC_CNT2	= 3,
		SUBTOTAL_FUNC_MAX	= 4,
		SUBTOTAL_FUNC_MIN	= 5,
		SUBTOTAL_FUNC_PROD	= 6,
		SUBTOTAL_FUNC_STD	= 7,
		SUBTOTAL_FUNC_STDP	= 8,
		SUBTOTAL_FUNC_SUM	= 9,
		SUBTOTAL_FUNC_VAR	= 10,
		SUBTOTAL_FUNC_VARP	= 11
	};


// -----------------------------------------------------------------------

/*
 * Dialog liefert die ausgezeichneten Feldwerte "leer"/"nicht leer"
 * als Konstanten SC_EMPTYFIELDS bzw. SC_NONEMPTYFIELDS in nVal in
 * Verbindung mit dem Schalter bQueryByString auf FALSE.
 */

#define SC_EMPTYFIELDS		((double)0x0042)
#define SC_NONEMPTYFIELDS	((double)0x0043)

namespace utl
{
	class SearchParam;
	class TextSearch;
}

struct ScQueryEntry
{
	sal_Bool			bDoQuery;
	sal_Bool			bQueryByString;
    bool            bQueryByDate;
	SCCOLROW		nField;
	ScQueryOp		eOp;
	ScQueryConnect  eConnect;
	String*			pStr;
	double			nVal;
	utl::SearchParam*	pSearchParam;		// falls RegExp, nicht gespeichert
	utl::TextSearch*	pSearchText;		// falls RegExp, nicht gespeichert

	ScQueryEntry();
	ScQueryEntry(const ScQueryEntry& r);
	~ScQueryEntry();

	// legt ggbf. pSearchParam und pSearchText an, immer RegExp!
	utl::TextSearch*	GetSearchTextPtr( sal_Bool bCaseSens );

	void			Clear();
	ScQueryEntry&	operator=( const ScQueryEntry& r );
	sal_Bool			operator==( const ScQueryEntry& r ) const;
};

// -----------------------------------------------------------------------

struct SC_DLLPUBLIC ScSubTotalParam
{
	SCCOL			nCol1;			// Selektierter Bereich
	SCROW			nRow1;
	SCCOL			nCol2;
	SCROW			nRow2;
	sal_Bool			bRemoveOnly;
	sal_Bool			bReplace;					// vorhandene Ergebnisse ersetzen
	sal_Bool			bPagebreak;					// Seitenumbruch bei Gruppenwechsel
	sal_Bool			bCaseSens;					// Gross-/Kleinschreibung
	sal_Bool			bDoSort;					// vorher sortieren
	sal_Bool			bAscending;					// aufsteigend sortieren
	sal_Bool			bUserDef;					// Benutzer-def. Sort.Reihenfolge
	sal_uInt16			nUserIndex;                 // Index auf Liste
	sal_Bool			bIncludePattern;			// Formate mit sortieren
	sal_Bool			bGroupActive[MAXSUBTOTAL];	// aktive Gruppen
	SCCOL			nField[MAXSUBTOTAL];		// zugehoeriges Feld
	SCCOL			nSubTotals[MAXSUBTOTAL];	// Anzahl der SubTotals
	SCCOL*			pSubTotals[MAXSUBTOTAL];	// Array der zu berechnenden Spalten
	ScSubTotalFunc*	pFunctions[MAXSUBTOTAL];	// Array der zugehoerige Funktionen

	ScSubTotalParam();
	ScSubTotalParam( const ScSubTotalParam& r );

	ScSubTotalParam&	operator=		( const ScSubTotalParam& r );
	sal_Bool				operator==		( const ScSubTotalParam& r ) const;
	void				Clear			();
	void 				SetSubTotals	( sal_uInt16				nGroup,
										  const SCCOL*			ptrSubTotals,
										  const ScSubTotalFunc*	ptrFuncions,
										  sal_uInt16				nCount );
};

// -----------------------------------------------------------------------
class ScArea;

struct ScConsolidateParam
{
	SCCOL			nCol;					// Cursor Position /
	SCROW			nRow;					// bzw. Anfang des Zielbereiches
	SCTAB			nTab;
	ScSubTotalFunc	eFunction;				// Berechnungsvorschrift
	sal_uInt16			nDataAreaCount;			// Anzahl der Datenbereiche
	ScArea**		ppDataAreas;			// Zeiger-Array auf Datenbereiche
	sal_Bool			bByCol;					// nach Spalten
	sal_Bool			bByRow;					// nach Zeilen
	sal_Bool			bReferenceData;			// Quelldaten referenzieren

	ScConsolidateParam();
	ScConsolidateParam( const ScConsolidateParam& r );
	~ScConsolidateParam();

	ScConsolidateParam&	operator=		( const ScConsolidateParam& r );
	sal_Bool				operator==		( const ScConsolidateParam& r ) const;
	void				Clear			(); // = ClearDataAreas()+Members
	void				ClearDataAreas	();
	void				SetAreas		( ScArea* const* ppAreas, sal_uInt16 nCount );
};

// -----------------------------------------------------------------------
extern ::utl::TransliterationWrapper* GetScGlobalpTransliteration();//CHINA001
extern const LocaleDataWrapper* GetScGlobalpLocaleData();

#endif