1 /************************************************************** 2 * 3 * Licensed to the Apache Software Foundation (ASF) under one 4 * or more contributor license agreements. See the NOTICE file 5 * distributed with this work for additional information 6 * regarding copyright ownership. The ASF licenses this file 7 * to you under the Apache License, Version 2.0 (the 8 * "License"); you may not use this file except in compliance 9 * with the License. You may obtain a copy of the License at 10 * 11 * http://www.apache.org/licenses/LICENSE-2.0 12 * 13 * Unless required by applicable law or agreed to in writing, 14 * software distributed under the License is distributed on an 15 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY 16 * KIND, either express or implied. See the License for the 17 * specific language governing permissions and limitations 18 * under the License. 19 * 20 *************************************************************/ 21 22 23 24 // MARKER(update_precomp.py): autogen include statement, do not remove 25 #include "precompiled_sd.hxx" 26 27 #include <algorithm> 28 29 #include <comphelper/classids.hxx> 30 31 #include <vcl/svapp.hxx> 32 #include "eetext.hxx" 33 #include <editeng/eeitem.hxx> 34 #include <svx/svdoutl.hxx> 35 #include <editeng/editdata.hxx> 36 #include <svx/pageitem.hxx> 37 #include <editeng/lrspitem.hxx> 38 #include <editeng/bulitem.hxx> 39 #include <svx/svdpagv.hxx> 40 #include <editeng/fhgtitem.hxx> 41 #include <editeng/outlobj.hxx> 42 #include <svx/svdoole2.hxx> 43 #include <svx/svdograf.hxx> 44 #include <svx/svdopage.hxx> 45 #include <svx/svdopage.hxx> 46 #include <sfx2/printer.hxx> 47 #include <basic/basmgr.hxx> 48 #include <editeng/pbinitem.hxx> 49 #include <svx/svdundo.hxx> 50 #include <svl/smplhint.hxx> 51 #include <editeng/adjitem.hxx> 52 #include <editeng/editobj.hxx> 53 #ifndef _SVX_SRIPTTYPEITEM_HXX 54 #include <editeng/scripttypeitem.hxx> 55 #endif 56 #include <svx/unopage.hxx> 57 #include <editeng/flditem.hxx> 58 #include <svx/sdr/contact/displayinfo.hxx> 59 #include <svx/svditer.hxx> 60 61 #include <editeng/adjitem.hxx> 62 63 #include "../ui/inc/DrawDocShell.hxx" 64 #include "Outliner.hxx" 65 #include "app.hrc" 66 #include "misc.hxx" 67 #include "eetext.hxx" 68 #include "drawdoc.hxx" 69 #include "sdpage.hxx" 70 #include "pglink.hxx" 71 #include "sdresid.hxx" 72 #include "stlsheet.hxx" 73 #include "glob.hrc" 74 #include "glob.hxx" 75 #include "helpids.h" 76 #include "anminfo.hxx" 77 #include "undo/undomanager.hxx" 78 #include "undo/undoobjects.hxx" 79 #include <svx/sdr/contact/displayinfo.hxx> 80 #include <svx/sdr/contact/viewobjectcontact.hxx> 81 #include <svx/sdr/contact/viewcontact.hxx> 82 #include <svx/sdr/contact/objectcontact.hxx> 83 #include <svx/unoapi.hxx> 84 85 #include <set> 86 87 using namespace ::sd; 88 using namespace ::com::sun::star; 89 90 TYPEINIT2( SdPage, FmFormPage, SdrObjUserCall ); 91 92 /************************************************************************* 93 |* 94 |* Ctor 95 |* 96 \************************************************************************/ 97 98 SdPage::SdPage(SdDrawDocument& rNewDoc, StarBASIC* pBasic, sal_Bool bMasterPage) 99 : FmFormPage(rNewDoc, pBasic, bMasterPage) 100 , SdrObjUserCall() 101 , mePageKind(PK_STANDARD) 102 , meAutoLayout(AUTOLAYOUT_NONE) 103 , mbSelected(sal_False) 104 , mePresChange(PRESCHANGE_MANUAL) 105 , mnTime(1) 106 , mbSoundOn(sal_False) 107 , mbExcluded(sal_False) 108 , mbLoopSound(sal_False) 109 , mbStopSound(sal_False) 110 , mbScaleObjects(sal_True) 111 , mbBackgroundFullSize( sal_False ) 112 , meCharSet(gsl_getSystemTextEncoding()) 113 , mnPaperBin(PAPERBIN_PRINTER_SETTINGS) 114 , mpPageLink(NULL) 115 , mpItems(NULL) 116 , mnTransitionType(0) 117 , mnTransitionSubtype(0) 118 , mbTransitionDirection(sal_True) 119 , mnTransitionFadeColor(0) 120 , mfTransitionDuration(2.0) 121 , mbIsPrecious(true) 122 { 123 // Der Layoutname der Seite wird von SVDRAW benutzt, um die Praesentations- 124 // vorlagen der Gliederungsobjekte zu ermitteln. Darum enthaelt er bereits 125 // den Bezeichner fuer die Gliederung (STR_LAYOUT_OUTLINE). 126 maLayoutName = String(SdResId(STR_LAYOUT_DEFAULT_NAME)); 127 maLayoutName.AppendAscii( RTL_CONSTASCII_STRINGPARAM( SD_LT_SEPARATOR )); 128 maLayoutName += String(SdResId(STR_LAYOUT_OUTLINE)); 129 130 Size aPageSize(GetSize()); 131 132 if (aPageSize.Width() > aPageSize.Height()) 133 { 134 meOrientation = ORIENTATION_LANDSCAPE; 135 } 136 else 137 { 138 meOrientation = ORIENTATION_PORTRAIT; 139 } 140 } 141 142 /************************************************************************* 143 |* 144 |* Dtor 145 |* 146 \************************************************************************/ 147 148 SdPage::~SdPage() 149 { 150 DisconnectLink(); 151 152 EndListenOutlineText(); 153 154 if( mpItems ) 155 delete mpItems; 156 } 157 158 struct OrdNumSorter 159 { 160 bool operator()( SdrObject* p1, SdrObject* p2 ) 161 { 162 return p1->GetOrdNum() < p2->GetOrdNum(); 163 } 164 }; 165 166 /** returns the nIndex'th object from the given PresObjKind, index starts with 1 */ 167 SdrObject* SdPage::GetPresObj(PresObjKind eObjKind, int nIndex, bool bFuzzySearch /* = false */ ) 168 { 169 // first sort all matching shapes with z-order 170 std::vector< SdrObject* > aMatches; 171 172 SdrObject* pObj = 0; 173 while( (pObj = maPresentationShapeList.getNextShape(pObj)) != 0 ) 174 { 175 SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pObj); 176 if( pInfo ) 177 { 178 bool bFound = false; 179 if( pInfo->mePresObjKind == eObjKind ) 180 { 181 bFound = true; 182 } 183 else if( bFuzzySearch && (eObjKind == PRESOBJ_OUTLINE) ) 184 { 185 switch( pInfo->mePresObjKind ) 186 { 187 case PRESOBJ_GRAPHIC: 188 case PRESOBJ_OBJECT: 189 case PRESOBJ_CHART: 190 case PRESOBJ_ORGCHART: 191 case PRESOBJ_TABLE: 192 case PRESOBJ_CALC: 193 case PRESOBJ_IMAGE: 194 case PRESOBJ_MEDIA: 195 bFound = sal_True; 196 break; 197 default: 198 break; 199 } 200 } 201 if( bFound ) 202 { 203 aMatches.push_back( pObj ); 204 } 205 } 206 } 207 208 if( aMatches.size() > 1 ) 209 { 210 OrdNumSorter aSortHelper; 211 std::sort( aMatches.begin(), aMatches.end(), aSortHelper ); 212 } 213 214 if( nIndex > 0 ) 215 nIndex--; 216 217 if( (nIndex >= 0) && ( aMatches.size() > static_cast<unsigned int>(nIndex)) ) 218 return aMatches[nIndex]; 219 220 return 0; 221 } 222 223 /** create background properties */ 224 void SdPage::EnsureMasterPageDefaultBackground() 225 { 226 if(mbMaster) 227 { 228 // no hard attributes on MasterPage attributes 229 getSdrPageProperties().ClearItem(); 230 SfxStyleSheet* pSheetForPresObj = GetStyleSheetForMasterPageBackground(); 231 232 if(pSheetForPresObj) 233 { 234 // set StyleSheet for background fill attributes 235 getSdrPageProperties().SetStyleSheet(pSheetForPresObj); 236 } 237 else 238 { 239 // no style found, assert and set at least XFILL_NONE 240 OSL_ENSURE(false, "No Style for MasterPageBackground fill found (!)"); 241 getSdrPageProperties().PutItem(XFillStyleItem(XFILL_NONE)); 242 } 243 } 244 } 245 246 /** creates a presentation object with the given PresObjKind on this page. A user call will be set 247 */ 248 SdrObject* SdPage::CreatePresObj(PresObjKind eObjKind, sal_Bool bVertical, const Rectangle& rRect, sal_Bool /* bInsert */ ) 249 { 250 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 251 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && IsInserted(); 252 253 SdrObject* pSdrObj = NULL; 254 255 bool bForceText = false; // forces the shape text to be set even if its empty 256 bool bEmptyPresObj = true; 257 258 switch( eObjKind ) 259 { 260 case PRESOBJ_TITLE: 261 { 262 pSdrObj = new SdrRectObj(OBJ_TITLETEXT); 263 264 if (mbMaster) 265 { 266 pSdrObj->SetNotVisibleAsMaster(sal_True); 267 } 268 } 269 break; 270 271 case PRESOBJ_OUTLINE: 272 { 273 pSdrObj = new SdrRectObj(OBJ_OUTLINETEXT); 274 275 if (mbMaster) 276 { 277 pSdrObj->SetNotVisibleAsMaster(sal_True); 278 } 279 } 280 break; 281 282 case PRESOBJ_NOTES: 283 { 284 pSdrObj = new SdrRectObj(OBJ_TEXT); 285 286 if (mbMaster) 287 { 288 pSdrObj->SetNotVisibleAsMaster(sal_True); 289 } 290 } 291 break; 292 293 case PRESOBJ_TEXT: 294 { 295 pSdrObj = new SdrRectObj(OBJ_TEXT); 296 } 297 break; 298 299 case PRESOBJ_GRAPHIC: 300 { 301 BitmapEx aBmpEx( SdResId( BMP_PRESOBJ_GRAPHIC ) ); 302 Graphic aGraphic( aBmpEx ); 303 OutputDevice &aOutDev = *Application::GetDefaultDevice(); 304 aOutDev.Push(); 305 306 aOutDev.SetMapMode( aGraphic.GetPrefMapMode() ); 307 Size aSizePix = aOutDev.LogicToPixel( aGraphic.GetPrefSize() ); 308 aOutDev.SetMapMode(MAP_100TH_MM); 309 310 Size aSize = aOutDev.PixelToLogic(aSizePix); 311 Point aPnt (0, 0); 312 Rectangle aRect (aPnt, aSize); 313 pSdrObj = new SdrGrafObj(aGraphic, aRect); 314 aOutDev.Pop(); 315 } 316 break; 317 318 case PRESOBJ_MEDIA: 319 case PRESOBJ_OBJECT: 320 { 321 pSdrObj = new SdrOle2Obj(); 322 BitmapEx aBmpEx( SdResId( BMP_PRESOBJ_OBJECT ) ); 323 Graphic aGraphic( aBmpEx ); 324 ( (SdrOle2Obj*) pSdrObj)->SetGraphic(&aGraphic); 325 } 326 break; 327 328 case PRESOBJ_CHART: 329 { 330 pSdrObj = new SdrOle2Obj(); 331 ( (SdrOle2Obj*) pSdrObj)->SetProgName( String( RTL_CONSTASCII_USTRINGPARAM( "StarChart" ))); 332 BitmapEx aBmpEx( SdResId( BMP_PRESOBJ_CHART ) ); 333 Graphic aGraphic( aBmpEx ); 334 ( (SdrOle2Obj*) pSdrObj)->SetGraphic(&aGraphic); 335 } 336 break; 337 338 case PRESOBJ_ORGCHART: 339 { 340 pSdrObj = new SdrOle2Obj(); 341 ( (SdrOle2Obj*) pSdrObj)->SetProgName( String( RTL_CONSTASCII_USTRINGPARAM( "StarOrg" ))); 342 BitmapEx aBmpEx( SdResId( BMP_PRESOBJ_ORGCHART ) ); 343 Graphic aGraphic( aBmpEx ); 344 ( (SdrOle2Obj*) pSdrObj)->SetGraphic(&aGraphic); 345 } 346 347 case PRESOBJ_TABLE: 348 case PRESOBJ_CALC: 349 { 350 pSdrObj = new SdrOle2Obj(); 351 ( (SdrOle2Obj*) pSdrObj)->SetProgName( String( RTL_CONSTASCII_USTRINGPARAM( "StarCalc" ))); 352 BitmapEx aBmpEx( SdResId( BMP_PRESOBJ_TABLE ) ); 353 Graphic aGraphic( aBmpEx ); 354 ( (SdrOle2Obj*) pSdrObj)->SetGraphic(&aGraphic); 355 } 356 break; 357 358 case PRESOBJ_HANDOUT: 359 { 360 //Erste Standardseite am SdrPageObj vermerken 361 // #i105146# We want no content to be displayed for PK_HANDOUT, 362 // so just never set a page as content 363 pSdrObj = new SdrPageObj(0); 364 // pSdrObj->SetResizeProtect(sal_True); 365 } 366 break; 367 368 case PRESOBJ_PAGE: 369 { 370 //Notizseite am SdrPageObj vermerken 371 sal_uInt16 nDestPageNum(GetPageNum()); 372 373 if(nDestPageNum) 374 { 375 // decrement only when != 0, else we get a 0xffff 376 nDestPageNum -= 1; 377 } 378 379 if(nDestPageNum < pModel->GetPageCount()) 380 { 381 pSdrObj = new SdrPageObj(pModel->GetPage(nDestPageNum)); 382 } 383 else 384 { 385 pSdrObj = new SdrPageObj(); 386 } 387 388 pSdrObj->SetResizeProtect(sal_True); 389 } 390 break; 391 392 case PRESOBJ_HEADER: 393 case PRESOBJ_FOOTER: 394 case PRESOBJ_DATETIME: 395 case PRESOBJ_SLIDENUMBER: 396 { 397 pSdrObj = new SdrRectObj(OBJ_TEXT); 398 bEmptyPresObj = false; 399 bForceText = true; 400 } 401 break; 402 default: 403 break; 404 } 405 406 if (pSdrObj) 407 { 408 pSdrObj->SetEmptyPresObj(bEmptyPresObj); 409 pSdrObj->SetLogicRect(rRect); 410 411 InsertObject(pSdrObj); 412 413 if ( pSdrObj->ISA(SdrTextObj) ) 414 { 415 // #96243# Tell the object EARLY that it is vertical to have the 416 // defaults for AutoGrowWidth/Height reversed 417 if(bVertical) 418 ((SdrTextObj*)pSdrObj)->SetVerticalWriting(sal_True); 419 420 SfxItemSet aTempAttr( ((SdDrawDocument*) pModel)->GetPool() ); 421 if( bVertical ) 422 aTempAttr.Put( SdrTextMinFrameWidthItem( rRect.GetSize().Width() ) ); 423 else 424 aTempAttr.Put( SdrTextMinFrameHeightItem( rRect.GetSize().Height() ) ); 425 426 if (mbMaster) 427 { 428 // Bei Praesentationsobjekten auf der MasterPage soll die 429 // Groesse vom Benutzwer frei waehlbar sein 430 431 // #96243# potential problem: This action was still NOT 432 // adapted for vertical text. This sure needs to be done. 433 if(bVertical) 434 aTempAttr.Put(SdrTextAutoGrowWidthItem(sal_False)); 435 else 436 aTempAttr.Put(SdrTextAutoGrowHeightItem(sal_False)); 437 } 438 439 // check if we need another vertical adjustement than the default 440 SdrTextVertAdjust eV = SDRTEXTVERTADJUST_TOP; 441 442 if( (eObjKind == PRESOBJ_FOOTER) && (mePageKind != PK_STANDARD) ) 443 { 444 eV = SDRTEXTVERTADJUST_BOTTOM; 445 } 446 else if( (eObjKind == PRESOBJ_SLIDENUMBER) && (mePageKind != PK_STANDARD) ) 447 { 448 eV = SDRTEXTVERTADJUST_BOTTOM; 449 } 450 451 if( eV != SDRTEXTVERTADJUST_TOP ) 452 aTempAttr.Put(SdrTextVertAdjustItem(eV)); 453 454 pSdrObj->SetMergedItemSet(aTempAttr); 455 456 pSdrObj->SetLogicRect(rRect); 457 } 458 459 String aString = GetPresObjText(eObjKind); 460 if( (aString.Len() || bForceText) && pSdrObj->ISA(SdrTextObj) ) 461 { 462 SdrOutliner* pOutliner = ( (SdDrawDocument*) GetModel() )->GetInternalOutliner(); 463 464 sal_uInt16 nOutlMode = pOutliner->GetMode(); 465 pOutliner->Init( OUTLINERMODE_TEXTOBJECT ); 466 pOutliner->SetStyleSheet( 0, NULL ); 467 pOutliner->SetVertical( bVertical ); 468 469 String aEmptyStr; 470 SetObjText( (SdrTextObj*) pSdrObj, (SdrOutliner*)pOutliner, eObjKind, aString ); 471 472 pOutliner->Init( nOutlMode ); 473 pOutliner->SetStyleSheet( 0, NULL ); 474 } 475 476 if( (eObjKind == PRESOBJ_HEADER) || (eObjKind == PRESOBJ_FOOTER) || (eObjKind == PRESOBJ_SLIDENUMBER) || (eObjKind == PRESOBJ_DATETIME) ) 477 { 478 SfxItemSet aTempAttr( ((SdDrawDocument*) pModel)->GetPool() ); 479 aTempAttr.Put( SvxFontHeightItem( 493, 100, EE_CHAR_FONTHEIGHT ) ); 480 aTempAttr.Put( SvxFontHeightItem( 493, 100, EE_CHAR_FONTHEIGHT_CTL ) ); 481 aTempAttr.Put( SvxFontHeightItem( 493, 100, EE_CHAR_FONTHEIGHT_CJK ) ); 482 483 SvxAdjust eH = SVX_ADJUST_LEFT; 484 485 if( (eObjKind == PRESOBJ_DATETIME) && (mePageKind != PK_STANDARD ) ) 486 { 487 eH = SVX_ADJUST_RIGHT; 488 } 489 else if( (eObjKind == PRESOBJ_FOOTER) && (mePageKind == PK_STANDARD ) ) 490 { 491 eH = SVX_ADJUST_CENTER; 492 } 493 else if( eObjKind == PRESOBJ_SLIDENUMBER ) 494 { 495 eH = SVX_ADJUST_RIGHT; 496 } 497 498 if( eH != SVX_ADJUST_LEFT ) 499 aTempAttr.Put(SvxAdjustItem(eH, EE_PARA_JUST )); 500 501 pSdrObj->SetMergedItemSet(aTempAttr); 502 } 503 504 if (mbMaster) 505 { 506 SdrLayerAdmin& rLayerAdmin = pModel->GetLayerAdmin(); 507 508 // Hintergrundobjekte der MasterPage 509 pSdrObj->SetLayer( rLayerAdmin. 510 GetLayerID(String(SdResId(STR_LAYER_BCKGRNDOBJ)), sal_False) ); 511 } 512 513 // Objekt am StyleSheet anmelden 514 // #95114# Set style only when one was found (as in 5.2) 515 // pSdrObj->NbcSetStyleSheet( GetStyleSheetForPresObj(eObjKind), sal_False ); 516 if( mePageKind != PK_HANDOUT ) 517 { 518 SfxStyleSheet* pSheetForPresObj = GetStyleSheetForPresObj(eObjKind); 519 if(pSheetForPresObj) 520 pSdrObj->SetStyleSheet(pSheetForPresObj, sal_False); 521 } 522 523 if (eObjKind == PRESOBJ_OUTLINE) 524 { 525 for (sal_uInt16 nLevel = 1; nLevel < 10; nLevel++) 526 { 527 String aName(maLayoutName); 528 aName += sal_Unicode( ' ' ); 529 aName += String::CreateFromInt32( nLevel ); 530 SfxStyleSheet* pSheet = (SfxStyleSheet*)pModel->GetStyleSheetPool()->Find(aName, SD_STYLE_FAMILY_MASTERPAGE); 531 DBG_ASSERT(pSheet, "Vorlage fuer Gliederungsobjekt nicht gefunden"); 532 if (pSheet) 533 pSdrObj->StartListening(*pSheet); 534 } 535 } 536 537 if ( eObjKind == PRESOBJ_OBJECT || 538 eObjKind == PRESOBJ_CHART || 539 eObjKind == PRESOBJ_ORGCHART || 540 eObjKind == PRESOBJ_CALC || 541 eObjKind == PRESOBJ_GRAPHIC ) 542 { 543 SfxItemSet aSet( ((SdDrawDocument*) pModel)->GetPool() ); 544 aSet.Put( SdrTextContourFrameItem( sal_True ) ); 545 aSet.Put( SvxAdjustItem( SVX_ADJUST_CENTER, EE_PARA_JUST ) ); 546 547 pSdrObj->SetMergedItemSet(aSet); 548 } 549 550 if( bUndo ) 551 { 552 pUndoManager->AddUndoAction(pModel->GetSdrUndoFactory().CreateUndoNewObject(*pSdrObj)); 553 } 554 555 if( bUndo ) 556 { 557 pUndoManager->AddUndoAction( new UndoObjectPresentationKind( *pSdrObj ) ); 558 pUndoManager->AddUndoAction( new UndoObjectUserCall(*pSdrObj) ); 559 } 560 561 InsertPresObj(pSdrObj, eObjKind); 562 pSdrObj->SetUserCall(this); 563 564 pSdrObj->RecalcBoundRect(); 565 } 566 567 return(pSdrObj); 568 } 569 570 /************************************************************************* 571 |* 572 |* Es werden Praesentationsobjekte auf der Page erzeugt. 573 |* Alle Praesentationsobjekte erhalten einen UserCall auf die Page. 574 |* 575 \************************************************************************/ 576 577 SfxStyleSheet* SdPage::GetStyleSheetForMasterPageBackground() const 578 { 579 String aName(GetLayoutName()); 580 String aSep( RTL_CONSTASCII_USTRINGPARAM( SD_LT_SEPARATOR )); 581 sal_uInt16 nPos = aName.Search(aSep); 582 583 if (nPos != STRING_NOTFOUND) 584 { 585 nPos = nPos + aSep.Len(); 586 aName.Erase(nPos); 587 } 588 589 aName += String(SdResId(STR_LAYOUT_BACKGROUND)); 590 591 SfxStyleSheetBasePool* pStShPool = pModel->GetStyleSheetPool(); 592 SfxStyleSheetBase* pResult = pStShPool->Find(aName, SD_STYLE_FAMILY_MASTERPAGE); 593 return (SfxStyleSheet*)pResult; 594 } 595 596 SfxStyleSheet* SdPage::GetStyleSheetForPresObj(PresObjKind eObjKind) const 597 { 598 String aName(GetLayoutName()); 599 String aSep( RTL_CONSTASCII_USTRINGPARAM( SD_LT_SEPARATOR )); 600 sal_uInt16 nPos = aName.Search(aSep); 601 if (nPos != STRING_NOTFOUND) 602 { 603 nPos = nPos + aSep.Len(); 604 aName.Erase(nPos); 605 } 606 607 switch (eObjKind) 608 { 609 case PRESOBJ_OUTLINE: 610 { 611 aName = GetLayoutName(); 612 aName += sal_Unicode( ' ' ); 613 aName += String::CreateFromInt32( 1 ); 614 } 615 break; 616 617 case PRESOBJ_TITLE: 618 aName += String(SdResId(STR_LAYOUT_TITLE)); 619 break; 620 621 case PRESOBJ_NOTES: 622 aName += String(SdResId(STR_LAYOUT_NOTES)); 623 break; 624 625 case PRESOBJ_TEXT: 626 aName += String(SdResId(STR_LAYOUT_SUBTITLE)); 627 break; 628 629 case PRESOBJ_HEADER: 630 case PRESOBJ_FOOTER: 631 case PRESOBJ_DATETIME: 632 case PRESOBJ_SLIDENUMBER: 633 aName += String(SdResId(STR_LAYOUT_BACKGROUNDOBJECTS)); 634 break; 635 636 default: 637 break; 638 } 639 640 SfxStyleSheetBasePool* pStShPool = pModel->GetStyleSheetPool(); 641 SfxStyleSheetBase* pResult = pStShPool->Find(aName, SD_STYLE_FAMILY_MASTERPAGE); 642 return (SfxStyleSheet*)pResult; 643 } 644 645 /** returns the presentation style with the given helpid from this masterpage or this 646 slides masterpage */ 647 SdStyleSheet* SdPage::getPresentationStyle( sal_uInt32 nHelpId ) const 648 { 649 String aStyleName( pPage->GetLayoutName() ); 650 const String aSep( RTL_CONSTASCII_USTRINGPARAM( SD_LT_SEPARATOR )); 651 aStyleName.Erase(aStyleName.Search(aSep) + aSep.Len()); 652 653 sal_uInt16 nNameId; 654 switch( nHelpId ) 655 { 656 case HID_PSEUDOSHEET_TITLE: nNameId = STR_LAYOUT_TITLE; break; 657 case HID_PSEUDOSHEET_SUBTITLE: nNameId = STR_LAYOUT_SUBTITLE; break; 658 case HID_PSEUDOSHEET_OUTLINE1: 659 case HID_PSEUDOSHEET_OUTLINE2: 660 case HID_PSEUDOSHEET_OUTLINE3: 661 case HID_PSEUDOSHEET_OUTLINE4: 662 case HID_PSEUDOSHEET_OUTLINE5: 663 case HID_PSEUDOSHEET_OUTLINE6: 664 case HID_PSEUDOSHEET_OUTLINE7: 665 case HID_PSEUDOSHEET_OUTLINE8: 666 case HID_PSEUDOSHEET_OUTLINE9: nNameId = STR_LAYOUT_OUTLINE; break; 667 case HID_PSEUDOSHEET_BACKGROUNDOBJECTS: nNameId = STR_LAYOUT_BACKGROUNDOBJECTS; break; 668 case HID_PSEUDOSHEET_BACKGROUND: nNameId = STR_LAYOUT_BACKGROUND; break; 669 case HID_PSEUDOSHEET_NOTES: nNameId = STR_LAYOUT_NOTES; break; 670 671 default: 672 DBG_ERROR( "SdPage::getPresentationStyle(), illegal argument!" ); 673 return 0; 674 } 675 aStyleName.Append( String( SdResId( nNameId ) ) ); 676 if( nNameId == STR_LAYOUT_OUTLINE ) 677 { 678 aStyleName.Append( sal_Unicode( ' ' )); 679 aStyleName.Append( String::CreateFromInt32( sal_Int32( nHelpId - HID_PSEUDOSHEET_OUTLINE ))); 680 } 681 682 SfxStyleSheetBasePool* pStShPool = pModel->GetStyleSheetPool(); 683 SfxStyleSheetBase* pResult = pStShPool->Find(aStyleName, SD_STYLE_FAMILY_MASTERPAGE); 684 return dynamic_cast<SdStyleSheet*>(pResult); 685 } 686 687 /************************************************************************* 688 |* 689 |* Das Praesentationsobjekt rObj hat sich geaendert und wird nicht mehr 690 |* durch das Praesentationsobjekt der MasterPage referenziert. 691 |* Der UserCall wird geloescht. 692 |* 693 \************************************************************************/ 694 695 void SdPage::Changed(const SdrObject& rObj, SdrUserCallType eType, const Rectangle& ) 696 { 697 if (!maLockAutoLayoutArrangement.isLocked()) 698 { 699 switch (eType) 700 { 701 case SDRUSERCALL_MOVEONLY: 702 case SDRUSERCALL_RESIZE: 703 { 704 if( pModel->isLocked() ) 705 break; 706 707 SdrObject* pObj = (SdrObject*) &rObj; 708 709 if (pObj) 710 { 711 if (!mbMaster) 712 { 713 if( pObj->GetUserCall() ) 714 { 715 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 716 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && IsInserted(); 717 /* 718 DBG_ASSERT( bUndo || (pUndoManager && pUndoManager->IsDoing()), 719 "SdPage::Changed(), model change without undo!?" ); 720 */ 721 if( bUndo ) 722 pUndoManager->AddUndoAction( new UndoObjectUserCall(*pObj) ); 723 724 // Objekt was resized by user and does not listen to its slide anymore 725 pObj->SetUserCall(0); 726 } 727 } 728 else if (pModel) 729 { 730 // MasterPage-Objekt wurde veraendert, daher 731 // Objekte auf allen Seiten anpassen 732 sal_uInt16 nPageCount = ((SdDrawDocument*) pModel)->GetSdPageCount(mePageKind); 733 734 for (sal_uInt16 i = 0; i < nPageCount; i++) 735 { 736 SdPage* pLoopPage = ((SdDrawDocument*) pModel)->GetSdPage(i, mePageKind); 737 738 if (pLoopPage && this == &(pLoopPage->TRG_GetMasterPage())) 739 { 740 // Seite hoert auf diese MasterPage, daher 741 // AutoLayout anpassen 742 pLoopPage->SetAutoLayout(pLoopPage->GetAutoLayout()); 743 } 744 } 745 } 746 } 747 } 748 break; 749 750 case SDRUSERCALL_DELETE: 751 case SDRUSERCALL_REMOVED: 752 default: 753 break; 754 } 755 } 756 } 757 758 /************************************************************************* 759 |* 760 |* Erzeugt auf einer MasterPage Hintergrund, Titel- und Layout-Bereich 761 |* 762 \************************************************************************/ 763 764 void SdPage::CreateTitleAndLayout(sal_Bool bInit, sal_Bool bCreate ) 765 { 766 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 767 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && IsInserted(); 768 769 SdPage* pMasterPage = this; 770 771 if (!mbMaster) 772 { 773 pMasterPage = (SdPage*)(&(TRG_GetMasterPage())); 774 } 775 776 if (!pMasterPage) 777 { 778 return; 779 } 780 781 /************************************************************************** 782 * Hintergrund, Titel- und Layout-Bereich werden angelegt 783 **************************************************************************/ 784 if( mePageKind == PK_STANDARD ) 785 { 786 pMasterPage->EnsureMasterPageDefaultBackground(); 787 } 788 789 if( ( (SdDrawDocument*) GetModel() )->GetDocumentType() == DOCUMENT_TYPE_IMPRESS ) 790 { 791 if( mePageKind == PK_HANDOUT && bInit ) 792 { 793 // handout template 794 795 // delete all available handout presentation objects 796 SdrObject *pObj=NULL; 797 while( (pObj = pMasterPage->GetPresObj(PRESOBJ_HANDOUT)) != 0 ) 798 { 799 pMasterPage->RemoveObject(pObj->GetOrdNum()); 800 801 if( bUndo ) 802 { 803 pUndoManager->AddUndoAction(pModel->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj)); 804 } 805 else 806 { 807 SdrObject::Free( pObj ); // memory leak i120050 808 } 809 } 810 811 std::vector< Rectangle > aAreas; 812 CalculateHandoutAreas( *static_cast< SdDrawDocument* >(GetModel() ), pMasterPage->GetAutoLayout(), false, aAreas ); 813 814 const bool bSkip = pMasterPage->GetAutoLayout() == AUTOLAYOUT_HANDOUT3; 815 std::vector< Rectangle >::iterator iter( aAreas.begin() ); 816 817 while( iter != aAreas.end() ) 818 { 819 SdrPageObj* pPageObj = static_cast<SdrPageObj*>(pMasterPage->CreatePresObj(PRESOBJ_HANDOUT, sal_False, (*iter++), sal_True) ); 820 // #i105146# We want no content to be displayed for PK_HANDOUT, 821 // so just never set a page as content 822 pPageObj->SetReferencedPage(0L); 823 824 if( bSkip && iter != aAreas.end() ) 825 iter++; 826 } 827 } 828 829 if( mePageKind != PK_HANDOUT ) 830 { 831 SdrObject* pMasterTitle = pMasterPage->GetPresObj( PRESOBJ_TITLE ); 832 if( pMasterTitle == NULL ) 833 pMasterPage->CreateDefaultPresObj(PRESOBJ_TITLE, true); 834 835 SdrObject* pMasterOutline = pMasterPage->GetPresObj( mePageKind==PK_NOTES ? PRESOBJ_NOTES : PRESOBJ_OUTLINE ); 836 if( pMasterOutline == NULL ) 837 pMasterPage->CreateDefaultPresObj( mePageKind == PK_STANDARD ? PRESOBJ_OUTLINE : PRESOBJ_NOTES, true ); 838 } 839 840 // create header&footer objects 841 842 if( bCreate ) 843 { 844 if( mePageKind != PK_STANDARD ) 845 { 846 SdrObject* pHeader = pMasterPage->GetPresObj( PRESOBJ_HEADER ); 847 if( pHeader == NULL ) 848 pMasterPage->CreateDefaultPresObj( PRESOBJ_HEADER, true ); 849 } 850 851 SdrObject* pDate = pMasterPage->GetPresObj( PRESOBJ_DATETIME ); 852 if( pDate == NULL ) 853 pMasterPage->CreateDefaultPresObj( PRESOBJ_DATETIME, true ); 854 855 SdrObject* pFooter = pMasterPage->GetPresObj( PRESOBJ_FOOTER ); 856 if( pFooter == NULL ) 857 pMasterPage->CreateDefaultPresObj( PRESOBJ_FOOTER, true ); 858 859 SdrObject* pNumber = pMasterPage->GetPresObj( PRESOBJ_SLIDENUMBER ); 860 if( pNumber == NULL ) 861 pMasterPage->CreateDefaultPresObj( PRESOBJ_SLIDENUMBER, true ); 862 } 863 } 864 } 865 866 SdrObject* SdPage::CreateDefaultPresObj(PresObjKind eObjKind, bool bInsert) 867 { 868 if( eObjKind == PRESOBJ_TITLE ) 869 { 870 Rectangle aTitleRect( GetTitleRect() ); 871 return CreatePresObj(PRESOBJ_TITLE, sal_False, aTitleRect, bInsert); 872 } 873 else if( eObjKind == PRESOBJ_OUTLINE ) 874 { 875 Rectangle aLayoutRect( GetLayoutRect() ); 876 return CreatePresObj( PRESOBJ_OUTLINE, sal_False, aLayoutRect, bInsert); 877 } 878 else if( eObjKind == PRESOBJ_NOTES ) 879 { 880 Rectangle aLayoutRect( GetLayoutRect() ); 881 return CreatePresObj( PRESOBJ_NOTES, sal_False, aLayoutRect, bInsert); 882 } 883 else if( (eObjKind == PRESOBJ_FOOTER) || (eObjKind == PRESOBJ_DATETIME) || (eObjKind == PRESOBJ_SLIDENUMBER) || (eObjKind == PRESOBJ_HEADER ) ) 884 { 885 // create footer objects for standard master page 886 if( mePageKind == PK_STANDARD ) 887 { 888 const long nLftBorder = GetLftBorder(); 889 const long nUppBorder = GetUppBorder(); 890 891 Point aTitlePos ( nLftBorder, nUppBorder ); 892 Size aPageSize ( GetSize() ); 893 aPageSize.Width() -= nLftBorder + GetRgtBorder(); 894 aPageSize.Height() -= nUppBorder + GetLwrBorder(); 895 896 const int Y = long(nUppBorder + aPageSize.Height() * 0.911); 897 const int W1 = long(aPageSize.Width() * 0.233); 898 const int W2 = long(aPageSize.Width() * 0.317); 899 const int H = long(aPageSize.Height() * 0.069); 900 901 if( eObjKind == PRESOBJ_DATETIME ) 902 { 903 Point aPos( long(nLftBorder+(aPageSize.Width()*0.05)), Y ); 904 Size aSize( W1, H ); 905 Rectangle aRect( aPos, aSize ); 906 return CreatePresObj( PRESOBJ_DATETIME, sal_False, aRect, bInsert ); 907 } 908 else if( eObjKind == PRESOBJ_FOOTER ) 909 { 910 Point aPos( long(nLftBorder+ aPageSize.Width() * 0.342), Y ); 911 Size aSize( W2, H ); 912 Rectangle aRect( aPos, aSize ); 913 return CreatePresObj( PRESOBJ_FOOTER, sal_False, aRect, bInsert ); 914 } 915 else if( eObjKind == PRESOBJ_SLIDENUMBER ) 916 { 917 Point aPos( long(nLftBorder+(aPageSize.Width()*0.717)), Y ); 918 Size aSize( W1, H ); 919 Rectangle aRect( aPos, aSize ); 920 return CreatePresObj( PRESOBJ_SLIDENUMBER, sal_False, aRect, bInsert ); 921 } 922 else 923 { 924 DBG_ERROR( "SdPage::CreateDefaultPresObj() - can't create a header placeholder for a slide master" ); 925 return NULL; 926 } 927 } 928 else 929 { 930 // create header&footer objects for handout and notes master 931 Point aTitlePos ( GetLftBorder(), GetUppBorder() ); 932 Size aPageSize ( GetSize() ); 933 aPageSize.Width() -= GetLftBorder() + GetRgtBorder(); 934 aPageSize.Height() -= GetUppBorder() + GetLwrBorder(); 935 936 937 const int NOTES_HEADER_FOOTER_WIDTH = long(aPageSize.Width() * 0.434); 938 const int NOTES_HEADER_FOOTER_HEIGHT = long(aPageSize.Height() * 0.05); 939 940 Size aSize( NOTES_HEADER_FOOTER_WIDTH, NOTES_HEADER_FOOTER_HEIGHT ); 941 942 const int X1 = GetLftBorder(); 943 const int X2 = GetLftBorder() + long(aPageSize.Width() - NOTES_HEADER_FOOTER_WIDTH); 944 const int Y1 = GetUppBorder(); 945 const int Y2 = GetUppBorder() + long(aPageSize.Height() - NOTES_HEADER_FOOTER_HEIGHT ); 946 947 if( eObjKind == PRESOBJ_HEADER ) 948 { 949 Point aPos( X1, Y1 ); 950 Rectangle aRect( aPos, aSize ); 951 return CreatePresObj( PRESOBJ_HEADER, sal_False, aRect, bInsert ); 952 } 953 else if( eObjKind == PRESOBJ_DATETIME ) 954 { 955 Point aPos( X2, Y1 ); 956 Rectangle aRect( aPos, aSize ); 957 return CreatePresObj( PRESOBJ_DATETIME, sal_False, aRect, bInsert ); 958 } 959 else if( eObjKind == PRESOBJ_FOOTER ) 960 { 961 Point aPos( X1, Y2 ); 962 Rectangle aRect( aPos, aSize ); 963 return CreatePresObj( PRESOBJ_FOOTER, sal_False, aRect, bInsert ); 964 } 965 else if( eObjKind == PRESOBJ_SLIDENUMBER ) 966 { 967 Point aPos( X2, Y2 ); 968 Rectangle aRect( aPos, aSize ); 969 return CreatePresObj( PRESOBJ_SLIDENUMBER, sal_False, aRect, bInsert ); 970 } 971 972 DBG_ERROR("SdPage::CreateDefaultPresObj() - this should not happen!"); 973 return NULL; 974 } 975 } 976 else 977 { 978 DBG_ERROR("SdPage::CreateDefaultPresObj() - unknown PRESOBJ kind" ); 979 return NULL; 980 } 981 } 982 983 /************************************************************************* 984 |* 985 |* Titelbereich zurueckgeben 986 |* 987 \************************************************************************/ 988 989 Rectangle SdPage::GetTitleRect() const 990 { 991 Rectangle aTitleRect; 992 993 if (mePageKind != PK_HANDOUT) 994 { 995 /****************************************************************** 996 * Standard- oder Notiz-Seite: Titelbereich 997 ******************************************************************/ 998 Point aTitlePos ( GetLftBorder(), GetUppBorder() ); 999 Size aTitleSize ( GetSize() ); 1000 aTitleSize.Width() -= GetLftBorder() + GetRgtBorder(); 1001 aTitleSize.Height() -= GetUppBorder() + GetLwrBorder(); 1002 1003 if (mePageKind == PK_STANDARD) 1004 { 1005 aTitlePos.X() += long( aTitleSize.Width() * 0.05 ); 1006 aTitlePos.Y() += long( aTitleSize.Height() * 0.0399 ); 1007 aTitleSize.Width() = long( aTitleSize.Width() * 0.9 ); 1008 aTitleSize.Height() = long( aTitleSize.Height() * 0.167 ); 1009 } 1010 else if (mePageKind == PK_NOTES) 1011 { 1012 Point aPos = aTitlePos; 1013 aPos.Y() += long( aTitleSize.Height() * 0.076 ); 1014 1015 // Hoehe beschraenken 1016 aTitleSize.Height() = (long) (aTitleSize.Height() * 0.375); 1017 1018 Size aPartArea = aTitleSize; 1019 Size aSize; 1020 sal_uInt16 nDestPageNum(GetPageNum()); 1021 SdrPage* pRefPage = 0L; 1022 1023 if(nDestPageNum) 1024 { 1025 // only decrement if != 0, else we get 0xffff 1026 nDestPageNum -= 1; 1027 } 1028 1029 if(nDestPageNum < pModel->GetPageCount()) 1030 { 1031 pRefPage = pModel->GetPage(nDestPageNum); 1032 } 1033 1034 if ( pRefPage ) 1035 { 1036 // tatsaechliche Seitengroesse in das Handout-Rechteck skalieren 1037 double fH = (double) aPartArea.Width() / pRefPage->GetWdt(); 1038 double fV = (double) aPartArea.Height() / pRefPage->GetHgt(); 1039 1040 if ( fH > fV ) 1041 fH = fV; 1042 aSize.Width() = (long) (fH * pRefPage->GetWdt()); 1043 aSize.Height() = (long) (fH * pRefPage->GetHgt()); 1044 1045 aPos.X() += (aPartArea.Width() - aSize.Width()) / 2; 1046 aPos.Y() += (aPartArea.Height()- aSize.Height())/ 2; 1047 } 1048 1049 aTitlePos = aPos; 1050 aTitleSize = aSize; 1051 } 1052 1053 aTitleRect.SetPos(aTitlePos); 1054 aTitleRect.SetSize(aTitleSize); 1055 } 1056 1057 return aTitleRect; 1058 } 1059 1060 1061 /************************************************************************* 1062 |* 1063 |* Gliederungsbereich zurueckgeben 1064 |* 1065 \************************************************************************/ 1066 1067 Rectangle SdPage::GetLayoutRect() const 1068 { 1069 Rectangle aLayoutRect; 1070 1071 if (mePageKind != PK_HANDOUT) 1072 { 1073 Point aLayoutPos ( GetLftBorder(), GetUppBorder() ); 1074 Size aLayoutSize ( GetSize() ); 1075 aLayoutSize.Width() -= GetLftBorder() + GetRgtBorder(); 1076 aLayoutSize.Height() -= GetUppBorder() + GetLwrBorder(); 1077 1078 if (mePageKind == PK_STANDARD) 1079 { 1080 aLayoutPos.X() += long( aLayoutSize.Width() * 0.05 ); 1081 aLayoutPos.Y() += long( aLayoutSize.Height() * 0.234 ); 1082 aLayoutSize.Width() = long( aLayoutSize.Width() * 0.9 ); 1083 aLayoutSize.Height() = long( aLayoutSize.Height() * 0.66 ); 1084 aLayoutRect.SetPos(aLayoutPos); 1085 aLayoutRect.SetSize(aLayoutSize); 1086 } 1087 else if (mePageKind == PK_NOTES) 1088 { 1089 aLayoutPos.X() += long( aLayoutSize.Width() * 0.1 ); 1090 aLayoutPos.Y() += long( aLayoutSize.Height() * 0.475 ); 1091 aLayoutSize.Width() = long( aLayoutSize.Width() * 0.8 ); 1092 aLayoutSize.Height() = long( aLayoutSize.Height() * 0.45 ); 1093 aLayoutRect.SetPos(aLayoutPos); 1094 aLayoutRect.SetSize(aLayoutSize); 1095 } 1096 } 1097 1098 return aLayoutRect; 1099 } 1100 1101 1102 /************************************************************************** 1103 |* 1104 |* Diese Methode weist ein AutoLayout zu 1105 |* 1106 \*************************************************************************/ 1107 1108 const int MAX_PRESOBJS = 7; // maximum number of presentation objects per layout 1109 const int VERTICAL = 0x8000; 1110 1111 struct LayoutDescriptor 1112 { 1113 int mnLayout; 1114 PresObjKind meKind[MAX_PRESOBJS]; 1115 bool mbVertical[MAX_PRESOBJS]; 1116 1117 LayoutDescriptor( int nLayout, int k0 = 0, int k1 = 0, int k2 = 0, int k3 = 0, int k4 = 0, int k5 = 0, int k6 = 0 ); 1118 }; 1119 1120 LayoutDescriptor::LayoutDescriptor( int nLayout, int k0, int k1, int k2, int k3, int k4, int k5, int k6 ) 1121 : mnLayout( nLayout ) 1122 { 1123 meKind[0] = static_cast<PresObjKind>(k0 & (~VERTICAL)); mbVertical[0] = (k0 & VERTICAL) == VERTICAL; 1124 meKind[1] = static_cast<PresObjKind>(k1 & (~VERTICAL)); mbVertical[1] = (k1 & VERTICAL) == VERTICAL; 1125 meKind[2] = static_cast<PresObjKind>(k2 & (~VERTICAL)); mbVertical[2] = (k2 & VERTICAL) == VERTICAL; 1126 meKind[3] = static_cast<PresObjKind>(k3 & (~VERTICAL)); mbVertical[3] = (k3 & VERTICAL) == VERTICAL; 1127 meKind[4] = static_cast<PresObjKind>(k4 & (~VERTICAL)); mbVertical[4] = (k4 & VERTICAL) == VERTICAL; 1128 meKind[5] = static_cast<PresObjKind>(k5 & (~VERTICAL)); mbVertical[5] = (k5 & VERTICAL) == VERTICAL; 1129 meKind[6] = static_cast<PresObjKind>(k6 & (~VERTICAL)); mbVertical[6] = (k6 & VERTICAL) == VERTICAL; 1130 } 1131 1132 static const LayoutDescriptor& GetLayoutDescriptor( AutoLayout eLayout ) 1133 { 1134 static LayoutDescriptor aLayouts[AUTOLAYOUT__END-AUTOLAYOUT__START] = 1135 { 1136 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_TEXT ), // AUTOLAYOUT_TITLE 1137 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_ENUM 1138 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_CHART 1139 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_2TEXT 1140 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXTCHART 1141 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_ORG 1142 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXTCLbIP 1143 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_CHARTTEXT 1144 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TAB 1145 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_CLIPTEXT 1146 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXTOBJ 1147 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OBJECT ), // AUTOLAYOUT_OBJ 1148 LayoutDescriptor( 2, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXT2OBJ 1149 LayoutDescriptor( 1, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXTOBJ 1150 LayoutDescriptor( 4, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_OBJOVERTEXT 1151 LayoutDescriptor( 3, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_2OBJTEXT 1152 LayoutDescriptor( 5, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_2OBJOVERTEXT 1153 LayoutDescriptor( 4, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), // AUTOLAYOUT_TEXTOVEROBJ 1154 LayoutDescriptor( 6, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, // AUTOLAYOUT_4OBJ 1155 PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ), 1156 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_NONE ), // AUTOLAYOUT_ONLY_TITLE 1157 LayoutDescriptor( 0, PRESOBJ_NONE ), // AUTOLAYOUT_NONE 1158 LayoutDescriptor( 0, PRESOBJ_PAGE, PRESOBJ_NOTES ), // AUTOLAYOUT_NOTES 1159 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT1 1160 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT2 1161 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT3 1162 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT4 1163 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT6 1164 LayoutDescriptor( 7, PRESOBJ_TITLE|VERTICAL, PRESOBJ_OUTLINE|VERTICAL, PRESOBJ_OUTLINE ),// AUTOLAYOUT_VERTICAL_TITLE_TEXT_CHART 1165 LayoutDescriptor( 8, PRESOBJ_TITLE|VERTICAL, PRESOBJ_OUTLINE|VERTICAL ), // AUTOLAYOUT_VERTICAL_TITLE_VERTICAL_OUTLINE 1166 LayoutDescriptor( 0, PRESOBJ_TITLE, PRESOBJ_OUTLINE|VERTICAL ), // AUTOLAYOUT_TITLE_VERTICAL_OUTLINE 1167 LayoutDescriptor( 9, PRESOBJ_TITLE, PRESOBJ_OUTLINE|VERTICAL, PRESOBJ_OUTLINE|VERTICAL ), // AUTOLAYOUT_TITLE_VERTICAL_OUTLINE_CLIPART 1168 LayoutDescriptor( 0 ), // AUTOLAYOUT_HANDOUT9 1169 LayoutDescriptor( 10, PRESOBJ_TEXT, PRESOBJ_NONE ), // AUTOLAYOUT_ONLY_TEXT 1170 LayoutDescriptor( 6, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, // AUTOLAYOUT_4CLIPART 1171 PRESOBJ_GRAPHIC, PRESOBJ_GRAPHIC ), 1172 LayoutDescriptor( 11, PRESOBJ_TITLE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, // AUTOLAYOUT_6CLIPART 1173 PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE, PRESOBJ_OUTLINE ) 1174 }; 1175 1176 if( (eLayout < AUTOLAYOUT__START) || (eLayout >= AUTOLAYOUT__END) ) 1177 eLayout = AUTOLAYOUT_NONE; 1178 1179 return aLayouts[ eLayout - AUTOLAYOUT__START ]; 1180 } 1181 1182 static void CalcAutoLayoutRectangles( SdPage& rPage, int nLayout, Rectangle* rRectangle ) 1183 { 1184 Rectangle aTitleRect; 1185 Rectangle aLayoutRect; 1186 1187 if( rPage.GetPageKind() != PK_HANDOUT ) 1188 { 1189 SdPage& rMasterPage = static_cast<SdPage&>(rPage.TRG_GetMasterPage()); 1190 SdrObject* pMasterTitle = rMasterPage.GetPresObj( PRESOBJ_TITLE ); 1191 SdrObject* pMasterOutline = rMasterPage.GetPresObj( rPage.GetPageKind()==PK_NOTES ? PRESOBJ_NOTES : PRESOBJ_OUTLINE ); 1192 1193 if( pMasterTitle ) 1194 aTitleRect = pMasterTitle->GetLogicRect(); 1195 1196 if (aTitleRect.IsEmpty() ) 1197 aTitleRect = rPage.GetTitleRect(); 1198 1199 if( pMasterOutline ) 1200 aLayoutRect = pMasterOutline->GetLogicRect(); 1201 1202 if (aLayoutRect.IsEmpty() ) 1203 aLayoutRect = rPage.GetLayoutRect(); 1204 } 1205 1206 rRectangle[0] = aTitleRect; 1207 1208 int i; 1209 for( i = 1; i < MAX_PRESOBJS; i++ ) 1210 rRectangle[i] = aLayoutRect; 1211 1212 Size aTitleSize( aTitleRect.GetSize() ); 1213 Point aTitlePos( aTitleRect.TopLeft() ); 1214 Size aLayoutSize( aLayoutRect.GetSize() ); 1215 Point aLayoutPos( aLayoutRect.TopLeft() ); 1216 Size aTempSize; 1217 Point aTempPnt; 1218 1219 sal_Bool bRightToLeft = ( rPage.GetModel() && static_cast< SdDrawDocument* >( rPage.GetModel() )->GetDefaultWritingMode() == ::com::sun::star::text::WritingMode_RL_TB ); 1220 1221 switch( nLayout ) 1222 { 1223 case 0: // default layout using only the title and layout area 1224 break; // do nothing 1225 case 1: // title, 2 shapes 1226 case 9: // title, 2 vertical shapes 1227 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1228 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1229 1230 aLayoutPos.X() = long (aLayoutPos.X() + aLayoutSize.Width() * 1.05); 1231 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1232 1233 if( bRightToLeft && (nLayout != 9) ) 1234 ::std::swap< Rectangle >( rRectangle[1], rRectangle[2] ); 1235 break; 1236 case 2: // title, shape, 2 shapes 1237 aTempPnt = aLayoutPos; 1238 aTempSize = aLayoutSize; 1239 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1240 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1241 aLayoutPos.X() = long (aLayoutPos.X() + aLayoutSize.Width() * 1.05); 1242 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1243 1244 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1245 rRectangle[3] = Rectangle (aLayoutPos, aLayoutSize); 1246 1247 aLayoutPos = aTempPnt; 1248 aLayoutSize = aTempSize; 1249 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1250 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1251 1252 if( bRightToLeft ) 1253 { 1254 ::std::swap< long >( rRectangle[1].Left(), rRectangle[2].Left() ); 1255 rRectangle[3].Left() = rRectangle[2].Left(); 1256 } 1257 break; 1258 case 3: // title, 2 shapes, shape 1259 aTempPnt = aLayoutPos; 1260 aTempSize = aLayoutSize; 1261 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1262 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1263 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1264 1265 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1266 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1267 1268 aLayoutPos = aTempPnt; 1269 aLayoutSize = aTempSize; 1270 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1271 aLayoutPos.X() = long (aLayoutPos.X() + aLayoutSize.Width() * 1.05); 1272 rRectangle[3] = Rectangle (aLayoutPos, aLayoutSize); 1273 1274 if( bRightToLeft ) 1275 { 1276 ::std::swap< long >( rRectangle[1].Left(), rRectangle[2].Left() ); 1277 rRectangle[3].Left() = rRectangle[2].Left(); 1278 } 1279 break; 1280 case 4: // title, shape above shape 1281 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1282 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1283 1284 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1285 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1286 break; 1287 1288 case 5: // title, 2 shapes above shape 1289 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1290 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1291 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1292 1293 aTempPnt = aLayoutPos; 1294 aLayoutPos.X() = long (aLayoutPos.X() + aLayoutSize.Width() * 1.05); 1295 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1296 1297 aLayoutPos.X() = aTempPnt.X(); 1298 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1299 aLayoutSize.Width() = long (aLayoutSize.Width() / 0.488); 1300 rRectangle[3] = Rectangle (aLayoutPos, aLayoutSize); 1301 break; 1302 case 6: // title, 4 shapes 1303 { 1304 sal_uLong nX = long (aLayoutPos.X()); 1305 1306 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1307 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.488); 1308 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1309 1310 aLayoutPos.X() = long (nX + aLayoutSize.Width() * 1.05); 1311 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1312 1313 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1314 rRectangle[3] = Rectangle (aLayoutPos, aLayoutSize); 1315 1316 aLayoutPos.X() = nX; 1317 rRectangle[4] = Rectangle (aLayoutPos, aLayoutSize); 1318 break; 1319 } 1320 case 7: // vertical title, shape above shape 1321 { 1322 Size aSize( rRectangle[0].GetSize().Height(), rRectangle[1].BottomLeft().Y() - rRectangle[0].TopLeft().Y() ); 1323 rRectangle[0].SetSize( aSize ); 1324 rRectangle[0].SetPos( aTitleRect.TopRight() - Point( aSize.Width(), 0 ) ); 1325 1326 Size aPageSize ( rPage.GetSize() ); 1327 aPageSize.Height() -= rPage.GetUppBorder() + rPage.GetLwrBorder(); 1328 aSize.Height() = long ( rRectangle[0].GetSize().Height() * 0.47 ); 1329 aSize.Width() = long( aPageSize.Width() * 0.7 ); 1330 rRectangle[1].SetPos( aTitleRect.TopLeft() ); 1331 rRectangle[1].SetSize( aSize ); 1332 1333 aSize.Height() = rRectangle[0].GetSize().Height(); 1334 Point aPos( aTitleRect.TopLeft() ); 1335 aPos.Y() += long ( aSize.Height() * 0.53 ); 1336 rRectangle[2].SetPos( aPos ); 1337 aSize.Height() = long ( rRectangle[0].GetSize().Height() * 0.47 ); 1338 rRectangle[2].SetSize( aSize ); 1339 break; 1340 } 1341 case 8: // vertical title, shape 1342 { 1343 Size aSize( rRectangle[0].GetSize().Height(), rRectangle[1].BottomLeft().Y() - rRectangle[0].TopLeft().Y() ); 1344 rRectangle[0].SetSize( aSize ); 1345 rRectangle[0].SetPos( aTitleRect.TopRight() - Point( aSize.Width(), 0 ) ); 1346 1347 Size aPageSize ( rPage.GetSize() ); 1348 aPageSize.Height() -= rPage.GetUppBorder() + rPage.GetLwrBorder(); 1349 aSize.Height() = rRectangle[0].GetSize().Height(); 1350 aSize.Width() = long( aPageSize.Width() * 0.7 ); 1351 rRectangle[1].SetPos( aTitleRect.TopLeft() ); 1352 rRectangle[1].SetSize( aSize ); 1353 break; 1354 } 1355 case 10: // onlytext 1356 { 1357 Size aSize( rRectangle[0].GetSize().Width(), rRectangle[1].BottomLeft().Y() - rRectangle[0].TopLeft().Y() ); 1358 rRectangle[0].SetSize( aSize ); 1359 rRectangle[0].SetPos( aTitlePos); 1360 break; 1361 } 1362 case 11: // title, 6 shapes 1363 { 1364 sal_uLong nX = long (aLayoutPos.X()); 1365 1366 aLayoutSize.Height() = long (aLayoutSize.Height() * 0.477); 1367 aLayoutSize.Width() = long (aLayoutSize.Width() * 0.322); 1368 rRectangle[1] = Rectangle (aLayoutPos, aLayoutSize); 1369 1370 aLayoutPos.X() = long (nX + aLayoutSize.Width() * 1.05); 1371 rRectangle[2] = Rectangle (aLayoutPos, aLayoutSize); 1372 1373 aLayoutPos.X() = long (nX + aLayoutSize.Width() * 2 * 1.05); 1374 rRectangle[3] = Rectangle (aLayoutPos, aLayoutSize); 1375 1376 aLayoutPos.Y() = long (aLayoutPos.Y() + aLayoutSize.Height() * 1.095); 1377 rRectangle[4] = Rectangle (aLayoutPos, aLayoutSize); 1378 1379 aLayoutPos.X() = long (nX + aLayoutSize.Width() * 1.05); 1380 rRectangle[5] = Rectangle (aLayoutPos, aLayoutSize); 1381 1382 aLayoutPos.X() = nX; 1383 rRectangle[6] = Rectangle (aLayoutPos, aLayoutSize); 1384 1385 break; 1386 } 1387 1388 } 1389 } 1390 1391 1392 void findAutoLayoutShapesImpl( SdPage& rPage, const LayoutDescriptor& rDescriptor, std::vector< SdrObject* >& rShapes, bool bInit, bool bSwitchLayout ) 1393 { 1394 int i; 1395 1396 // init list of indexes for each presentation shape kind 1397 // this is used to find subsequent shapes with the same presentation shape kind 1398 int PresObjIndex[PRESOBJ_MAX]; 1399 for( i = 0; i < PRESOBJ_MAX; i++ ) PresObjIndex[i] = 1; 1400 1401 bool bMissing = false; 1402 1403 // for each entry in the layoutdescriptor, arrange a presentation shape 1404 for (i = 0; (i < MAX_PRESOBJS) && (rDescriptor.meKind[i] != PRESOBJ_NONE); i++) 1405 { 1406 PresObjKind eKind = rDescriptor.meKind[i]; 1407 SdrObject* pObj = 0; 1408 while( (pObj = rPage.GetPresObj( eKind, PresObjIndex[eKind], true )) != 0 ) 1409 { 1410 PresObjIndex[eKind]++; // on next search for eKind, find next shape with same eKind 1411 1412 if( !bSwitchLayout || !pObj->IsEmptyPresObj() ) 1413 { 1414 rShapes[i] = pObj; 1415 break; 1416 } 1417 } 1418 1419 if( !pObj ) 1420 bMissing = true; 1421 } 1422 1423 if( bMissing && bInit ) 1424 { 1425 // for each entry in the layoutdescriptor, look for an alternative shape 1426 for (i = 0; (i < MAX_PRESOBJS) && (rDescriptor.meKind[i] != PRESOBJ_NONE); i++) 1427 { 1428 if( rShapes[i] ) 1429 continue; 1430 1431 PresObjKind eKind = rDescriptor.meKind[i]; 1432 1433 SdrObject* pObj = 0; 1434 bool bFound = false; 1435 1436 const int nShapeCount = rPage.GetObjCount(); 1437 int nShapeIndex = 0; 1438 while((nShapeIndex < nShapeCount) && !bFound ) 1439 { 1440 pObj = rPage.GetObj(nShapeIndex++); 1441 1442 if( pObj->IsEmptyPresObj() ) 1443 continue; 1444 1445 if( pObj->GetObjInventor() != SdrInventor ) 1446 continue; 1447 1448 // do not reuse shapes that are already part of the layout 1449 if( std::find( rShapes.begin(), rShapes.end(), pObj ) != rShapes.end() ) 1450 continue; 1451 1452 bool bPresStyle = pObj->GetStyleSheet() && (pObj->GetStyleSheet()->GetFamily() == SD_STYLE_FAMILY_MASTERPAGE); 1453 SdrObjKind eSdrObjKind = static_cast< SdrObjKind >( pObj->GetObjIdentifier() ); 1454 1455 switch( eKind ) 1456 { 1457 case PRESOBJ_TITLE: 1458 bFound = eSdrObjKind == OBJ_TITLETEXT; 1459 break; 1460 case PRESOBJ_TABLE: 1461 bFound = eSdrObjKind == OBJ_TABLE; 1462 break; 1463 case PRESOBJ_MEDIA: 1464 bFound = eSdrObjKind == OBJ_MEDIA; 1465 break; 1466 case PRESOBJ_OUTLINE: 1467 bFound = (eSdrObjKind == OBJ_OUTLINETEXT) || 1468 ((eSdrObjKind == OBJ_TEXT) && bPresStyle) || 1469 (eSdrObjKind == OBJ_TABLE) || (eSdrObjKind == OBJ_MEDIA) || (eSdrObjKind == OBJ_GRAF) || (eSdrObjKind == OBJ_OLE2); 1470 break; 1471 case PRESOBJ_GRAPHIC: 1472 bFound = eSdrObjKind == OBJ_GRAF; 1473 break; 1474 case PRESOBJ_OBJECT: 1475 if( eSdrObjKind == OBJ_OLE2 ) 1476 { 1477 SdrOle2Obj* pOle2 = dynamic_cast< SdrOle2Obj* >( pObj ); 1478 if( pOle2 ) 1479 { 1480 if( pOle2->IsEmpty() ) 1481 bFound = true; 1482 else if( rPage.GetModel() ) 1483 { 1484 SdrModel* pSdrModel = rPage.GetModel(); 1485 ::comphelper::IEmbeddedHelper *pPersist = pSdrModel->GetPersist(); 1486 if( pPersist ) 1487 { 1488 uno::Reference < embed::XEmbeddedObject > xObject = pPersist->getEmbeddedObjectContainer(). 1489 GetEmbeddedObject( static_cast< SdrOle2Obj* >( pObj )->GetPersistName() ); 1490 1491 // TODO CL->KA: Why is this not working anymore? 1492 if( xObject.is() ) 1493 { 1494 SvGlobalName aClassId( xObject->getClassID() ); 1495 1496 const SvGlobalName aAppletClassId( SO3_APPLET_CLASSID ); 1497 const SvGlobalName aPluginClassId( SO3_PLUGIN_CLASSID ); 1498 const SvGlobalName aIFrameClassId( SO3_IFRAME_CLASSID ); 1499 1500 if( aPluginClassId != aClassId && aAppletClassId != aClassId && aIFrameClassId != aClassId ) 1501 { 1502 bFound = true; 1503 } 1504 } 1505 } 1506 } 1507 } 1508 } 1509 break; 1510 case PRESOBJ_CHART: 1511 case PRESOBJ_CALC: 1512 if( eSdrObjKind == OBJ_OLE2 ) 1513 { 1514 SdrOle2Obj* pOle2 = dynamic_cast< SdrOle2Obj* >( pObj ); 1515 if( pOle2 ) 1516 { 1517 if( 1518 ((eKind == PRESOBJ_CHART) && 1519 ( pOle2->GetProgName().EqualsAscii( "StarChart" ) || pOle2->IsChart() ) ) 1520 || 1521 ((eKind == PRESOBJ_CALC) && 1522 ( pOle2->GetProgName().EqualsAscii( "StarCalc" ) || pOle2->IsCalc() ) ) ) 1523 { 1524 bFound = true; 1525 } 1526 } 1527 break; 1528 } 1529 else if( eSdrObjKind == OBJ_TABLE ) 1530 { 1531 bFound = true; 1532 } 1533 break; 1534 case PRESOBJ_PAGE: 1535 case PRESOBJ_HANDOUT: 1536 bFound = eSdrObjKind == OBJ_PAGE; 1537 break; 1538 case PRESOBJ_NOTES: 1539 case PRESOBJ_TEXT: 1540 bFound = (bPresStyle && (eSdrObjKind == OBJ_TEXT)) || (eSdrObjKind == OBJ_OUTLINETEXT); 1541 break; 1542 default: 1543 break; 1544 } 1545 } 1546 1547 if( bFound ) 1548 rShapes[i] = pObj; 1549 } 1550 } 1551 } 1552 1553 void SdPage::SetAutoLayout(AutoLayout eLayout, sal_Bool bInit, sal_Bool bCreate ) 1554 { 1555 sd::ScopeLockGuard aGuard( maLockAutoLayoutArrangement ); 1556 1557 const bool bSwitchLayout = eLayout != GetAutoLayout(); 1558 1559 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 1560 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && IsInserted(); 1561 1562 meAutoLayout = eLayout; 1563 1564 // if needed, creates and initialises the presentation shapes on this slides master page 1565 CreateTitleAndLayout(bInit, bCreate); 1566 1567 if((meAutoLayout == AUTOLAYOUT_NONE && maPresentationShapeList.isEmpty()) || mbMaster) 1568 { 1569 // MasterPage or no layout and no presentation shapes available, noting to do 1570 return; 1571 } 1572 1573 Rectangle aRectangle[MAX_PRESOBJS]; 1574 const LayoutDescriptor& aDescriptor = GetLayoutDescriptor( meAutoLayout ); 1575 CalcAutoLayoutRectangles( *this, aDescriptor.mnLayout, aRectangle ); 1576 1577 std::set< SdrObject* > aUsedPresentationObjects; 1578 1579 1580 std::vector< SdrObject* > aLayoutShapes(PRESOBJ_MAX, 0); 1581 findAutoLayoutShapesImpl( *this, aDescriptor, aLayoutShapes, bInit, bSwitchLayout ); 1582 1583 int i; 1584 1585 // for each entry in the layoutdescriptor, arrange a presentation shape 1586 for (i = 0; (i < MAX_PRESOBJS) && (aDescriptor.meKind[i] != PRESOBJ_NONE); i++) 1587 { 1588 PresObjKind eKind = aDescriptor.meKind[i]; 1589 SdrObject* pObj = InsertAutoLayoutShape( aLayoutShapes[i], eKind, aDescriptor.mbVertical[i], aRectangle[i], bInit ); 1590 if( pObj ) 1591 aUsedPresentationObjects.insert(pObj); // remember that we used this empty shape 1592 } 1593 1594 // now delete all empty presentation objects that are no longer used by the new layout 1595 if( bInit ) 1596 { 1597 SdrObject* pObj = maPresentationShapeList.getNextShape(0); 1598 1599 while( pObj ) 1600 { 1601 SdrObject* pNext = maPresentationShapeList.getNextShape(pObj); 1602 if( aUsedPresentationObjects.count(pObj) == 0 ) 1603 { 1604 1605 if( pObj->IsEmptyPresObj() ) 1606 { 1607 if( bUndo ) 1608 pUndoManager->AddUndoAction(pModel->GetSdrUndoFactory().CreateUndoDeleteObject(*pObj)); 1609 1610 RemoveObject( pObj->GetOrdNum() ); 1611 1612 if( !bUndo ) 1613 SdrObject::Free( pObj ); 1614 } 1615 /* #i108541# keep non empty pres obj as pres obj even if they are not part of the current layout 1616 else 1617 { 1618 if( bUndo ) 1619 { 1620 pUndoManager->AddUndoAction( new UndoObjectPresentationKind( *pObj ) ); 1621 if( pObj->GetUserCall() ) 1622 pUndoManager->AddUndoAction( new UndoObjectUserCall( *pObj ) ); 1623 } 1624 maPresentationShapeList.removeShape( *pObj ); 1625 pObj->SetUserCall(0); 1626 } 1627 */ 1628 } 1629 pObj = pNext; 1630 } 1631 } 1632 } 1633 1634 /************************************************************************* 1635 |* 1636 |* Objekt einfuegen 1637 |* 1638 \************************************************************************/ 1639 1640 void SdPage::NbcInsertObject(SdrObject* pObj, sal_uLong nPos, const SdrInsertReason* pReason) 1641 { 1642 FmFormPage::NbcInsertObject(pObj, nPos, pReason); 1643 1644 ((SdDrawDocument*) pModel)->InsertObject(pObj, this); 1645 1646 SdrLayerID nId = pObj->GetLayer(); 1647 if( mbMaster ) 1648 { 1649 if( nId == 0 ) 1650 pObj->NbcSetLayer( 2 ); // wrong layer. corrected to BackgroundObj layer 1651 } 1652 else 1653 { 1654 if( nId == 2 ) 1655 pObj->NbcSetLayer( 0 ); // wrong layer. corrected to layout layer 1656 } 1657 } 1658 1659 /************************************************************************* 1660 |* 1661 |* Objekt loeschen 1662 |* 1663 \************************************************************************/ 1664 1665 SdrObject* SdPage::RemoveObject(sal_uLong nObjNum) 1666 { 1667 onRemoveObject(GetObj( nObjNum )); 1668 return FmFormPage::RemoveObject(nObjNum); 1669 } 1670 1671 /************************************************************************* 1672 |* 1673 |* Objekt loeschen, ohne Broadcast 1674 |* 1675 \************************************************************************/ 1676 1677 SdrObject* SdPage::NbcRemoveObject(sal_uLong nObjNum) 1678 { 1679 onRemoveObject(GetObj( nObjNum )); 1680 return FmFormPage::NbcRemoveObject(nObjNum); 1681 } 1682 1683 // #95876# Also overload ReplaceObject methods to realize when 1684 // objects are removed with this mechanism instead of RemoveObject 1685 SdrObject* SdPage::NbcReplaceObject(SdrObject* pNewObj, sal_uLong nObjNum) 1686 { 1687 onRemoveObject(GetObj( nObjNum )); 1688 return FmFormPage::NbcReplaceObject(pNewObj, nObjNum); 1689 } 1690 1691 // #95876# Also overload ReplaceObject methods to realize when 1692 // objects are removed with this mechanism instead of RemoveObject 1693 SdrObject* SdPage::ReplaceObject(SdrObject* pNewObj, sal_uLong nObjNum) 1694 { 1695 onRemoveObject(GetObj( nObjNum )); 1696 return FmFormPage::ReplaceObject(pNewObj, nObjNum); 1697 } 1698 1699 // ------------------------------------------------------------------------- 1700 1701 // called after a shape is removed or replaced from this slide 1702 1703 void SdPage::onRemoveObject( SdrObject* pObject ) 1704 { 1705 if( pObject ) 1706 { 1707 RemovePresObj(pObject); 1708 1709 if( pModel ) 1710 static_cast<SdDrawDocument*>(pModel)->RemoveObject(pObject, this); 1711 1712 removeAnimations( pObject ); 1713 } 1714 } 1715 1716 /************************************************************************* 1717 |* 1718 |* 1719 |* 1720 \************************************************************************/ 1721 1722 void SdPage::SetSize(const Size& aSize) 1723 { 1724 Size aOldSize = GetSize(); 1725 1726 if (aSize != aOldSize) 1727 { 1728 FmFormPage::SetSize(aSize); 1729 1730 if (aOldSize.Height() == 10 && aOldSize.Width() == 10) 1731 { 1732 // Die Seite bekommt erstmalig eine gueltige Groesse gesetzt, 1733 // daher wird nun die Orientation initialisiert 1734 if (aSize.Width() > aSize.Height()) 1735 { 1736 meOrientation = ORIENTATION_LANDSCAPE; 1737 } 1738 else 1739 { 1740 meOrientation = ORIENTATION_PORTRAIT; 1741 } 1742 } 1743 } 1744 } 1745 1746 1747 /************************************************************************* 1748 |* 1749 |* 1750 |* 1751 \************************************************************************/ 1752 1753 void SdPage::SetBorder(sal_Int32 nLft, sal_Int32 nUpp, sal_Int32 nRgt, sal_Int32 nLwr) 1754 { 1755 if (nLft != GetLftBorder() || nUpp != GetUppBorder() || 1756 nRgt != GetRgtBorder() || nLwr != GetLwrBorder() ) 1757 { 1758 FmFormPage::SetBorder(nLft, nUpp, nRgt, nLwr); 1759 } 1760 } 1761 1762 1763 /************************************************************************* 1764 |* 1765 |* 1766 |* 1767 \************************************************************************/ 1768 1769 void SdPage::SetLftBorder(sal_Int32 nBorder) 1770 { 1771 if (nBorder != GetLftBorder() ) 1772 { 1773 FmFormPage::SetLftBorder(nBorder); 1774 } 1775 } 1776 1777 1778 /************************************************************************* 1779 |* 1780 |* 1781 |* 1782 \************************************************************************/ 1783 1784 void SdPage::SetRgtBorder(sal_Int32 nBorder) 1785 { 1786 if (nBorder != GetRgtBorder() ) 1787 { 1788 FmFormPage::SetRgtBorder(nBorder); 1789 } 1790 } 1791 1792 1793 /************************************************************************* 1794 |* 1795 |* 1796 |* 1797 \************************************************************************/ 1798 1799 void SdPage::SetUppBorder(sal_Int32 nBorder) 1800 { 1801 if (nBorder != GetUppBorder() ) 1802 { 1803 FmFormPage::SetUppBorder(nBorder); 1804 } 1805 } 1806 1807 1808 /************************************************************************* 1809 |* 1810 |* 1811 |* 1812 \************************************************************************/ 1813 1814 void SdPage::SetLwrBorder(sal_Int32 nBorder) 1815 { 1816 if (nBorder != GetLwrBorder() ) 1817 { 1818 FmFormPage::SetLwrBorder(nBorder); 1819 } 1820 } 1821 1822 /************************************************************************* 1823 |* 1824 |* Setzt BackgroundFullSize und ruft dann AdjustBackground auf 1825 |* 1826 \************************************************************************/ 1827 1828 void SdPage::SetBackgroundFullSize( sal_Bool bIn ) 1829 { 1830 if( bIn != mbBackgroundFullSize ) 1831 { 1832 mbBackgroundFullSize = bIn; 1833 } 1834 } 1835 1836 /************************************************************************* 1837 |* 1838 |* Alle Objekte an neue Seitengroesse anpassen 1839 |* 1840 |* bScaleAllObj: Alle Objekte werden in die neue Flaeche innerhalb der 1841 |* Seitenraender skaliert. Dabei werden die Position, Groesse und bei 1842 |* Praesentationsobjekten auf der MasterPage auch die Schrifthoehe der 1843 |* Praesentationsvorlagen skaliert. 1844 |* 1845 \************************************************************************/ 1846 1847 void SdPage::ScaleObjects(const Size& rNewPageSize, const Rectangle& rNewBorderRect, sal_Bool bScaleAllObj) 1848 { 1849 sd::ScopeLockGuard aGuard( maLockAutoLayoutArrangement ); 1850 1851 mbScaleObjects = bScaleAllObj; 1852 SdrObject* pObj = NULL; 1853 Point aRefPnt(0, 0); 1854 Size aNewPageSize(rNewPageSize); 1855 sal_Int32 nLeft = rNewBorderRect.Left(); 1856 sal_Int32 nRight = rNewBorderRect.Right(); 1857 sal_Int32 nUpper = rNewBorderRect.Top(); 1858 sal_Int32 nLower = rNewBorderRect.Bottom(); 1859 1860 // Negative Werte stehen fuer nicht zu aendernde Werte 1861 // -> aktuelle Werte verwenden 1862 if (aNewPageSize.Width() < 0) 1863 { 1864 aNewPageSize.Width() = GetWdt(); 1865 } 1866 if (aNewPageSize.Height() < 0) 1867 { 1868 aNewPageSize.Height() = GetHgt(); 1869 } 1870 if (nLeft < 0) 1871 { 1872 nLeft = GetLftBorder(); 1873 } 1874 if (nRight < 0) 1875 { 1876 nRight = GetRgtBorder(); 1877 } 1878 if (nUpper < 0) 1879 { 1880 nUpper = GetUppBorder(); 1881 } 1882 if (nLower < 0) 1883 { 1884 nLower = GetLwrBorder(); 1885 } 1886 1887 Point aBackgroundPos(nLeft, nUpper); 1888 Size aBackgroundSize(aNewPageSize); 1889 Rectangle aBorderRect (aBackgroundPos, aBackgroundSize); 1890 1891 if (mbScaleObjects) 1892 { 1893 aBackgroundSize.Width() -= nLeft + nRight; 1894 aBackgroundSize.Height() -= nUpper + nLower; 1895 aBorderRect.SetSize(aBackgroundSize); 1896 aNewPageSize = aBackgroundSize; 1897 } 1898 1899 long nOldWidth = GetWdt() - GetLftBorder() - GetRgtBorder(); 1900 long nOldHeight = GetHgt() - GetUppBorder() - GetLwrBorder(); 1901 1902 Fraction aFractX = Fraction(aNewPageSize.Width(), nOldWidth); 1903 Fraction aFractY = Fraction(aNewPageSize.Height(), nOldHeight); 1904 1905 sal_uLong nObjCnt = (mbScaleObjects ? GetObjCount() : 0); 1906 1907 for (sal_uLong nObj = 0; nObj < nObjCnt; nObj++) 1908 { 1909 sal_Bool bIsPresObjOnMaster = sal_False; 1910 1911 // Alle Objekte 1912 pObj = GetObj(nObj); 1913 1914 if (mbMaster && IsPresObj(pObj)) 1915 { 1916 // Es ist ein Praesentationsobjekt auf der MasterPage 1917 bIsPresObjOnMaster = sal_True; 1918 } 1919 1920 if (pObj) 1921 { 1922 // #88084# remember aTopLeft as original TopLeft 1923 Point aTopLeft(pObj->GetCurrentBoundRect().TopLeft()); 1924 1925 if (!pObj->IsEdgeObj()) 1926 { 1927 /************************************************************** 1928 * Objekt skalieren 1929 **************************************************************/ 1930 if (mbScaleObjects) 1931 { 1932 // #88084# use aTopLeft as original TopLeft 1933 aRefPnt = aTopLeft; 1934 } 1935 1936 pObj->Resize(aRefPnt, aFractX, aFractY); 1937 1938 if (mbScaleObjects) 1939 { 1940 SdrObjKind eObjKind = (SdrObjKind) pObj->GetObjIdentifier(); 1941 1942 if (bIsPresObjOnMaster) 1943 { 1944 /********************************************************** 1945 * Praesentationsvorlage: Texthoehe anpassen 1946 **********************************************************/ 1947 sal_uInt16 nIndexTitle = 0; 1948 sal_uInt16 nIndexOutline = 0; 1949 sal_uInt16 nIndexNotes = 0; 1950 1951 if (pObj == GetPresObj(PRESOBJ_TITLE, nIndexTitle)) 1952 { 1953 SfxStyleSheet* pTitleSheet = GetStyleSheetForPresObj(PRESOBJ_TITLE); 1954 1955 if (pTitleSheet) 1956 { 1957 SfxItemSet& rSet = pTitleSheet->GetItemSet(); 1958 1959 SvxFontHeightItem& rOldHgt = (SvxFontHeightItem&) rSet.Get(EE_CHAR_FONTHEIGHT); 1960 sal_uLong nFontHeight = rOldHgt.GetHeight(); 1961 nFontHeight = long(nFontHeight * (double) aFractY); 1962 rSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT)); 1963 1964 if( SFX_ITEM_AVAILABLE == rSet.GetItemState( EE_CHAR_FONTHEIGHT_CJK ) ) 1965 { 1966 rOldHgt = (SvxFontHeightItem&) rSet.Get(EE_CHAR_FONTHEIGHT_CJK); 1967 nFontHeight = rOldHgt.GetHeight(); 1968 nFontHeight = long(nFontHeight * (double) aFractY); 1969 rSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CJK)); 1970 } 1971 1972 if( SFX_ITEM_AVAILABLE == rSet.GetItemState( EE_CHAR_FONTHEIGHT_CTL ) ) 1973 { 1974 rOldHgt = (SvxFontHeightItem&) rSet.Get(EE_CHAR_FONTHEIGHT_CTL); 1975 nFontHeight = rOldHgt.GetHeight(); 1976 nFontHeight = long(nFontHeight * (double) aFractY); 1977 rSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CTL)); 1978 } 1979 1980 pTitleSheet->Broadcast(SfxSimpleHint(SFX_HINT_DATACHANGED)); 1981 } 1982 } 1983 else if (pObj == GetPresObj(PRESOBJ_OUTLINE, nIndexOutline)) 1984 { 1985 String aName(GetLayoutName()); 1986 aName += sal_Unicode( ' ' ); 1987 1988 for (sal_uInt16 i=1; i<=9; i++) 1989 { 1990 String sLayoutName(aName); 1991 sLayoutName += String::CreateFromInt32( (sal_Int32)i ); 1992 SfxStyleSheet* pOutlineSheet = (SfxStyleSheet*)((SdDrawDocument*) pModel)->GetStyleSheetPool()->Find(sLayoutName, SD_STYLE_FAMILY_MASTERPAGE); 1993 1994 if (pOutlineSheet) 1995 { 1996 // Neue Fonthoehe berechnen 1997 SfxItemSet aTempSet(pOutlineSheet->GetItemSet()); 1998 1999 SvxFontHeightItem& rOldHgt = (SvxFontHeightItem&) aTempSet.Get(EE_CHAR_FONTHEIGHT); 2000 sal_uLong nFontHeight = rOldHgt.GetHeight(); 2001 nFontHeight = long(nFontHeight * (double) aFractY); 2002 aTempSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT)); 2003 2004 if( SFX_ITEM_AVAILABLE == aTempSet.GetItemState( EE_CHAR_FONTHEIGHT_CJK ) ) 2005 { 2006 rOldHgt = (SvxFontHeightItem&) aTempSet.Get(EE_CHAR_FONTHEIGHT_CJK); 2007 nFontHeight = rOldHgt.GetHeight(); 2008 nFontHeight = long(nFontHeight * (double) aFractY); 2009 aTempSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CJK)); 2010 } 2011 2012 if( SFX_ITEM_AVAILABLE == aTempSet.GetItemState( EE_CHAR_FONTHEIGHT_CTL ) ) 2013 { 2014 rOldHgt = (SvxFontHeightItem&) aTempSet.Get(EE_CHAR_FONTHEIGHT_CTL); 2015 nFontHeight = rOldHgt.GetHeight(); 2016 nFontHeight = long(nFontHeight * (double) aFractY); 2017 aTempSet.Put(SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CTL)); 2018 } 2019 2020 // Bullet anpassen 2021 ((SdStyleSheet*) pOutlineSheet)->AdjustToFontHeight(aTempSet, sal_False); 2022 2023 // Sonderbehandlung: die INVALIDS auf NULL-Pointer 2024 // zurueckgesetzen (sonst landen INVALIDs oder 2025 // Pointer auf die DefaultItems in der Vorlage; 2026 // beides wuerde die Attribut-Vererbung unterbinden) 2027 aTempSet.ClearInvalidItems(); 2028 2029 // Sonderbehandlung: nur die gueltigen Anteile des 2030 // BulletItems 2031 if (aTempSet.GetItemState(EE_PARA_BULLET) == SFX_ITEM_AVAILABLE) 2032 { 2033 SvxBulletItem aOldBulItem((SvxBulletItem&) pOutlineSheet->GetItemSet().Get(EE_PARA_BULLET)); 2034 SvxBulletItem& rNewBulItem = (SvxBulletItem&) aTempSet.Get(EE_PARA_BULLET); 2035 aOldBulItem.CopyValidProperties(rNewBulItem); 2036 aTempSet.Put(aOldBulItem); 2037 } 2038 2039 pOutlineSheet->GetItemSet().Put(aTempSet); 2040 pOutlineSheet->Broadcast(SfxSimpleHint(SFX_HINT_DATACHANGED)); 2041 } 2042 } 2043 } 2044 else if (pObj == GetPresObj(PRESOBJ_NOTES, nIndexNotes)) 2045 { 2046 SfxStyleSheet* pNotesSheet = GetStyleSheetForPresObj(PRESOBJ_NOTES); 2047 2048 if (pNotesSheet) 2049 { 2050 sal_uLong nHeight = pObj->GetLogicRect().GetSize().Height(); 2051 sal_uLong nFontHeight = (sal_uLong) (nHeight * 0.0741); 2052 SfxItemSet& rSet = pNotesSheet->GetItemSet(); 2053 rSet.Put( SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT )); 2054 rSet.Put( SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CJK )); 2055 rSet.Put( SvxFontHeightItem(nFontHeight, 100, EE_CHAR_FONTHEIGHT_CTL )); 2056 pNotesSheet->Broadcast(SfxSimpleHint(SFX_HINT_DATACHANGED)); 2057 } 2058 } 2059 } 2060 else if ( eObjKind != OBJ_TITLETEXT && 2061 eObjKind != OBJ_OUTLINETEXT && 2062 pObj->ISA(SdrTextObj) && 2063 pObj->GetOutlinerParaObject() ) 2064 { 2065 /****************************************************** 2066 * Normales Textobjekt: Texthoehe anpassen 2067 ******************************************************/ 2068 sal_uLong nScriptType = pObj->GetOutlinerParaObject()->GetTextObject().GetScriptType(); 2069 sal_uInt16 nWhich = EE_CHAR_FONTHEIGHT; 2070 if ( nScriptType == SCRIPTTYPE_ASIAN ) 2071 nWhich = EE_CHAR_FONTHEIGHT_CJK; 2072 else if ( nScriptType == SCRIPTTYPE_COMPLEX ) 2073 nWhich = EE_CHAR_FONTHEIGHT_CTL; 2074 2075 // #88084# use more modern method to scale the text height 2076 sal_uInt32 nFontHeight = ((SvxFontHeightItem&)pObj->GetMergedItem(nWhich)).GetHeight(); 2077 sal_uInt32 nNewFontHeight = sal_uInt32((double)nFontHeight * (double)aFractY); 2078 2079 pObj->SetMergedItem(SvxFontHeightItem(nNewFontHeight, 100, nWhich)); 2080 } 2081 } 2082 } 2083 2084 if (mbScaleObjects && !pObj->IsEdgeObj()) 2085 { 2086 /************************************************************** 2087 * Objektposition skalieren 2088 **************************************************************/ 2089 Point aNewPos; 2090 2091 // #76447# corrected scaling; only distances may be scaled 2092 // #88084# use aTopLeft as original TopLeft 2093 aNewPos.X() = long((aTopLeft.X() - GetLftBorder()) * (double)aFractX) + nLeft; 2094 aNewPos.Y() = long((aTopLeft.Y() - GetUppBorder()) * (double)aFractY) + nUpper; 2095 2096 Size aVec(aNewPos.X() - aTopLeft.X(), aNewPos.Y() - aTopLeft.Y()); 2097 2098 if (aVec.Height() != 0 || aVec.Width() != 0) 2099 { 2100 pObj->NbcMove(aVec); 2101 } 2102 2103 pObj->SetChanged(); 2104 pObj->BroadcastObjectChange(); 2105 } 2106 } 2107 } 2108 } 2109 2110 SdrObject* convertPresentationObjectImpl( SdPage& rPage, SdrObject* pSourceObj, PresObjKind& eObjKind, bool bVertical, Rectangle aRect ) 2111 { 2112 SdDrawDocument* pModel = static_cast< SdDrawDocument* >( rPage.GetModel() ); 2113 DBG_ASSERT( pModel, "sd::convertPresentationObjectImpl(), no model on page!" ); 2114 if( !pModel || !pSourceObj ) 2115 return pSourceObj; 2116 2117 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 2118 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && rPage.IsInserted(); 2119 2120 SdrObject* pNewObj = pSourceObj; 2121 if((eObjKind == PRESOBJ_OUTLINE) && (pSourceObj->GetObjIdentifier() == OBJ_TEXT) ) 2122 { 2123 pNewObj = rPage.CreatePresObj(PRESOBJ_OUTLINE, bVertical, aRect); 2124 2125 // Text des Untertitels in das PRESOBJ_OUTLINE setzen 2126 OutlinerParaObject* pOutlParaObj = pSourceObj->GetOutlinerParaObject(); 2127 2128 if(pOutlParaObj) 2129 { 2130 // Text umsetzen 2131 ::sd::Outliner* pOutl = pModel->GetInternalOutliner( sal_True ); 2132 pOutl->Clear(); 2133 pOutl->SetText( *pOutlParaObj ); 2134 pOutlParaObj = pOutl->CreateParaObject(); 2135 pNewObj->SetOutlinerParaObject( pOutlParaObj ); 2136 pOutl->Clear(); 2137 pNewObj->SetEmptyPresObj(sal_False); 2138 2139 for (sal_uInt16 nLevel = 1; nLevel < 10; nLevel++) 2140 { 2141 // Neue Vorlage zuweisen 2142 String aName(rPage.GetLayoutName()); 2143 aName += sal_Unicode( ' ' ); 2144 aName += String::CreateFromInt32( nLevel ); 2145 SfxStyleSheet* pSheet = static_cast<SfxStyleSheet*>( pModel->GetStyleSheetPool()->Find(aName, SD_STYLE_FAMILY_MASTERPAGE) ); 2146 2147 if (pSheet) 2148 { 2149 if (nLevel == 1) 2150 { 2151 SfxStyleSheet* pSubtitleSheet = rPage.GetStyleSheetForPresObj(PRESOBJ_TEXT); 2152 2153 if (pSubtitleSheet) 2154 pOutlParaObj->ChangeStyleSheetName(SD_STYLE_FAMILY_MASTERPAGE, pSubtitleSheet->GetName(), pSheet->GetName()); 2155 } 2156 2157 pNewObj->StartListening(*pSheet); 2158 } 2159 } 2160 2161 // LRSpace-Item loeschen 2162 SfxItemSet aSet(pModel->GetPool(), EE_PARA_LRSPACE, EE_PARA_LRSPACE ); 2163 2164 aSet.Put(pNewObj->GetMergedItemSet()); 2165 2166 aSet.ClearItem(EE_PARA_LRSPACE); 2167 2168 pNewObj->SetMergedItemSet(aSet); 2169 2170 if( bUndo ) 2171 pUndoManager->AddUndoAction( pModel->GetSdrUndoFactory().CreateUndoDeleteObject(*pSourceObj) ); 2172 2173 // Remove outline shape from page 2174 rPage.RemoveObject( pSourceObj->GetOrdNum() ); 2175 2176 if( !bUndo ) 2177 SdrObject::Free( pSourceObj ); 2178 } 2179 } 2180 else if((eObjKind == PRESOBJ_TEXT) && (pSourceObj->GetObjIdentifier() == OBJ_OUTLINETEXT) ) 2181 { 2182 // is there an outline shape we can use to replace empty subtitle shape? 2183 pNewObj = rPage.CreatePresObj(PRESOBJ_TEXT, bVertical, aRect); 2184 2185 // Text des Gliederungsobjekts in das PRESOBJ_TITLE setzen 2186 OutlinerParaObject* pOutlParaObj = pSourceObj->GetOutlinerParaObject(); 2187 2188 if(pOutlParaObj) 2189 { 2190 // Text umsetzen 2191 ::sd::Outliner* pOutl = pModel->GetInternalOutliner(); 2192 pOutl->Clear(); 2193 pOutl->SetText( *pOutlParaObj ); 2194 pOutlParaObj = pOutl->CreateParaObject(); 2195 pNewObj->SetOutlinerParaObject( pOutlParaObj ); 2196 pOutl->Clear(); 2197 pNewObj->SetEmptyPresObj(sal_False); 2198 2199 // Linken Einzug zuruecksetzen 2200 SfxItemSet aSet(pModel->GetPool(), EE_PARA_LRSPACE, EE_PARA_LRSPACE ); 2201 2202 aSet.Put(pNewObj->GetMergedItemSet()); 2203 2204 const SvxLRSpaceItem& rLRItem = (const SvxLRSpaceItem&) aSet.Get(EE_PARA_LRSPACE); 2205 SvxLRSpaceItem aNewLRItem(rLRItem); 2206 aNewLRItem.SetTxtLeft(0); 2207 aSet.Put(aNewLRItem); 2208 2209 pNewObj->SetMergedItemSet(aSet); 2210 2211 SfxStyleSheet* pSheet = rPage.GetStyleSheetForPresObj(PRESOBJ_TEXT); 2212 if (pSheet) 2213 pNewObj->SetStyleSheet(pSheet, sal_True); 2214 2215 // Remove subtitle shape from page 2216 if( bUndo ) 2217 pUndoManager->AddUndoAction(pModel->GetSdrUndoFactory().CreateUndoDeleteObject(*pSourceObj)); 2218 2219 rPage.RemoveObject( pSourceObj->GetOrdNum() ); 2220 2221 if( !bUndo ) 2222 SdrObject::Free( pSourceObj ); 2223 } 2224 } 2225 else if((eObjKind == PRESOBJ_OUTLINE) && (pSourceObj->GetObjIdentifier() != OBJ_OUTLINETEXT) ) 2226 { 2227 switch( pSourceObj->GetObjIdentifier() ) 2228 { 2229 case OBJ_TABLE: eObjKind = PRESOBJ_TABLE; break; 2230 case OBJ_MEDIA: eObjKind = PRESOBJ_MEDIA; break; 2231 case OBJ_GRAF: eObjKind = PRESOBJ_GRAPHIC; break; 2232 case OBJ_OLE2: eObjKind = PRESOBJ_OBJECT; break; 2233 } 2234 } 2235 2236 return pNewObj; 2237 } 2238 2239 /** reuses or creates a presentation shape for an auto layout that fits the given parameter 2240 2241 @param eObjKind 2242 The kind of presentation shape we like to have 2243 @param nIndex 2244 If > 1 we skip the first nIndex-1 shapes with the presentation shape kind eObjKind while 2245 looking for an existing presentation shape 2246 @param bVertical 2247 If true, the shape is created vertical if bInit is true 2248 @param aRect 2249 The rectangle that should be used to transform the shape 2250 @param bInit 2251 If true the shape is created if not found 2252 @returns 2253 A presentation shape that was either found or created with the given parameters 2254 */ 2255 SdrObject* SdPage::InsertAutoLayoutShape( SdrObject* pObj, PresObjKind eObjKind, bool bVertical, Rectangle aRect, bool bInit ) 2256 { 2257 ::svl::IUndoManager* pUndoManager = pModel ? static_cast<SdDrawDocument*>(pModel)->GetUndoManager() : 0; 2258 const bool bUndo = pUndoManager && pUndoManager->IsInListAction() && IsInserted(); 2259 2260 if (!pObj && bInit) 2261 { 2262 pObj = CreatePresObj(eObjKind, bVertical, aRect); 2263 } 2264 else if ( pObj && (pObj->GetUserCall() || bInit) ) 2265 { 2266 // convert object if shape type does not match kind (f.e. converting outline text to subtitle text) 2267 if( bInit ) 2268 pObj = convertPresentationObjectImpl( *this, pObj, eObjKind, bVertical, aRect ); 2269 2270 if( bUndo ) 2271 { 2272 pUndoManager->AddUndoAction( pModel->GetSdrUndoFactory().CreateUndoGeoObject( *pObj ) ); 2273 pUndoManager->AddUndoAction( pModel->GetSdrUndoFactory().CreateUndoAttrObject( *pObj, sal_True, sal_True ) ); 2274 pUndoManager->AddUndoAction( new UndoObjectUserCall( *pObj ) ); 2275 } 2276 2277 // if ( pObj->ISA(SdrGrafObj) && !pObj->IsEmptyPresObj() ) 2278 ( /*(SdrGrafObj*)*/ pObj)->AdjustToMaxRect( aRect ); 2279 // else 2280 // SetLogicRect( pObj, aRect ); 2281 2282 pObj->SetUserCall(this); 2283 2284 SdrTextObj* pTextObject = dynamic_cast< SdrTextObj* >(pObj); 2285 if( pTextObject ) 2286 { 2287 if( pTextObject->IsVerticalWriting() != (bVertical ? sal_True : sal_False) ) 2288 { 2289 pTextObject->SetVerticalWriting( bVertical ); 2290 2291 // #94826# here make sure the correct anchoring is used when the object 2292 // is re-used but orientation is changed 2293 if(PRESOBJ_OUTLINE == eObjKind) 2294 pTextObject->SetMergedItem(SdrTextHorzAdjustItem( bVertical ? SDRTEXTHORZADJUST_RIGHT : SDRTEXTHORZADJUST_BLOCK )); 2295 } 2296 2297 if( !mbMaster && (pTextObject->GetObjIdentifier() != OBJ_TABLE) ) 2298 { 2299 if ( pTextObject->IsAutoGrowHeight() ) 2300 { 2301 // switch off AutoGrowHeight, set new MinHeight 2302 SfxItemSet aTempAttr( ((SdDrawDocument*) pModel)->GetPool() ); 2303 SdrTextMinFrameHeightItem aMinHeight( aRect.GetSize().Height() ); 2304 aTempAttr.Put( aMinHeight ); 2305 aTempAttr.Put( SdrTextAutoGrowHeightItem(sal_False) ); 2306 pTextObject->SetMergedItemSet(aTempAttr); 2307 pTextObject->SetLogicRect(aRect); 2308 2309 // switch on AutoGrowHeight 2310 SfxItemSet aAttr( ((SdDrawDocument*) pModel)->GetPool() ); 2311 aAttr.Put( SdrTextAutoGrowHeightItem(sal_True) ); 2312 2313 pTextObject->SetMergedItemSet(aAttr); 2314 } 2315 2316 if ( pTextObject->IsAutoGrowWidth() ) 2317 { 2318 // switch off AutoGrowWidth , set new MinWidth 2319 SfxItemSet aTempAttr( ((SdDrawDocument*) pModel)->GetPool() ); 2320 SdrTextMinFrameWidthItem aMinWidth( aRect.GetSize().Width() ); 2321 aTempAttr.Put( aMinWidth ); 2322 aTempAttr.Put( SdrTextAutoGrowWidthItem(sal_False) ); 2323 pTextObject->SetMergedItemSet(aTempAttr); 2324 pTextObject->SetLogicRect(aRect); 2325 2326 // switch on AutoGrowWidth 2327 SfxItemSet aAttr( ((SdDrawDocument*) pModel)->GetPool() ); 2328 aAttr.Put( SdrTextAutoGrowWidthItem(sal_True) ); 2329 pTextObject->SetMergedItemSet(aAttr); 2330 } 2331 } 2332 } 2333 } 2334 2335 if(pObj && bInit ) 2336 { 2337 if( !IsPresObj( pObj ) ) 2338 { 2339 if( bUndo ) 2340 pUndoManager->AddUndoAction( new UndoObjectPresentationKind( *pObj ) ); 2341 2342 InsertPresObj( pObj, eObjKind ); 2343 } 2344 2345 // make adjustments for vertical title and outline shapes 2346 if( bVertical && (( eObjKind == PRESOBJ_TITLE) || (eObjKind == PRESOBJ_OUTLINE))) 2347 { 2348 SfxItemSet aNewSet(pObj->GetMergedItemSet()); 2349 aNewSet.Put( SdrTextAutoGrowWidthItem(sal_True) ); 2350 aNewSet.Put( SdrTextAutoGrowHeightItem(sal_False) ); 2351 if( eObjKind == PRESOBJ_OUTLINE ) 2352 { 2353 aNewSet.Put( SdrTextVertAdjustItem(SDRTEXTVERTADJUST_TOP) ); 2354 aNewSet.Put( SdrTextHorzAdjustItem(SDRTEXTHORZADJUST_RIGHT) ); 2355 } 2356 pObj->SetMergedItemSet(aNewSet); 2357 } 2358 } 2359 2360 if ( pObj && (pObj->GetUserCall() || bInit) && ( pObj->IsEmptyPresObj() || !pObj->ISA(SdrGrafObj) ) ) 2361 pObj->AdjustToMaxRect( aRect ); 2362 2363 return pObj; 2364 } 2365 2366 2367 /************************************************************************* 2368 |* 2369 |* Liefert den PresObjKind eines Objektes zurueck 2370 |* 2371 \************************************************************************/ 2372 2373 PresObjKind SdPage::GetPresObjKind(SdrObject* pObj) const 2374 { 2375 PresObjKind eKind = PRESOBJ_NONE; 2376 if( (pObj != 0) && (maPresentationShapeList.hasShape(*pObj)) ) 2377 { 2378 SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pObj); 2379 if( pInfo ) 2380 eKind = pInfo->mePresObjKind; 2381 } 2382 2383 return eKind; 2384 } 2385 2386 bool SdPage::IsPresObj(const SdrObject* pObj) 2387 { 2388 return pObj && maPresentationShapeList.hasShape( const_cast<SdrObject&>(*pObj) ); 2389 } 2390 2391 void SdPage::RemovePresObj(const SdrObject* pObj) 2392 { 2393 if( pObj && maPresentationShapeList.hasShape(const_cast<SdrObject&>(*pObj)) ) 2394 { 2395 SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(const_cast<SdrObject&>(*pObj)); 2396 if( pInfo ) 2397 pInfo->mePresObjKind = PRESOBJ_NONE; 2398 maPresentationShapeList.removeShape(const_cast<SdrObject&>(*pObj)); 2399 } 2400 } 2401 2402 void SdPage::InsertPresObj(SdrObject* pObj, PresObjKind eKind ) 2403 { 2404 DBG_ASSERT( pObj, "sd::SdPage::InsertPresObj(), invalid presentation object inserted!" ); 2405 DBG_ASSERT( !IsPresObj(pObj), "sd::SdPage::InsertPresObj(), presentation object inserted twice!" ); 2406 if( pObj ) 2407 { 2408 SdAnimationInfo* pInfo = SdDrawDocument::GetShapeUserData(*pObj, true); 2409 if( pInfo ) 2410 pInfo->mePresObjKind = eKind; 2411 maPresentationShapeList.addShape(*pObj); 2412 } 2413 } 2414 2415 /************************************************************************* 2416 |* 2417 |* Text des Objektes setzen 2418 |* 2419 \************************************************************************/ 2420 2421 void SdPage::SetObjText(SdrTextObj* pObj, SdrOutliner* pOutliner, PresObjKind eObjKind, const String& rString ) 2422 { 2423 if ( pObj ) 2424 { 2425 DBG_ASSERT( pObj->ISA(SdrTextObj), "SetObjText: Kein SdrTextObj!" ); 2426 ::Outliner* pOutl = pOutliner; 2427 2428 if (!pOutliner) 2429 { 2430 SfxItemPool* pPool = ((SdDrawDocument*) GetModel())->GetDrawOutliner().GetEmptyItemSet().GetPool(); 2431 pOutl = new ::Outliner( pPool, OUTLINERMODE_OUTLINEOBJECT ); 2432 pOutl->SetRefDevice( SD_MOD()->GetRefDevice( *( (SdDrawDocument*) GetModel() )->GetDocSh() ) ); 2433 pOutl->SetEditTextObjectPool(pPool); 2434 pOutl->SetStyleSheetPool((SfxStyleSheetPool*)GetModel()->GetStyleSheetPool()); 2435 pOutl->EnableUndo(sal_False); 2436 pOutl->SetUpdateMode( sal_False ); 2437 } 2438 2439 sal_uInt16 nOutlMode = pOutl->GetMode(); 2440 Size aPaperSize = pOutl->GetPaperSize(); 2441 sal_Bool bUpdateMode = pOutl->GetUpdateMode(); 2442 pOutl->SetUpdateMode(sal_False); 2443 pOutl->SetParaAttribs( 0, pOutl->GetEmptyItemSet() ); 2444 2445 // #95114# Always set the object's StyleSheet at the Outliner to 2446 // use the current objects StyleSheet. Thus it's the same as in 2447 // SetText(...). 2448 // #95114# Moved this implementation from where SetObjText(...) was called 2449 // to inside this method to work even when outliner is fetched here. 2450 pOutl->SetStyleSheet(0, pObj->GetStyleSheet()); 2451 2452 String aString; 2453 2454 switch( eObjKind ) 2455 { 2456 case PRESOBJ_OUTLINE: 2457 { 2458 pOutl->Init( OUTLINERMODE_OUTLINEOBJECT ); 2459 2460 aString += sal_Unicode( '\t' ); 2461 aString += rString; 2462 2463 if (mbMaster) 2464 { 2465 pOutl->SetStyleSheet( 0, GetStyleSheetForPresObj(eObjKind) ); 2466 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t" )); 2467 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER2 ) ); 2468 2469 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t" )); 2470 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER3 ) ); 2471 2472 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t" )); 2473 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER4 ) ); 2474 2475 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t\t" )); 2476 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER5 ) ); 2477 2478 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t\t\t" )); 2479 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER6 ) ); 2480 2481 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t\t\t\t" )); 2482 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER7 ) ); 2483 2484 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t\t\t\t\t" )); 2485 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER8 ) ); 2486 2487 aString += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( "\n\t\t\t\t\t\t\t\t\t" )); 2488 aString += String ( SdResId( STR_PRESOBJ_MPOUTLLAYER9 ) ); 2489 } 2490 } 2491 break; 2492 2493 case PRESOBJ_TITLE: 2494 { 2495 pOutl->Init( OUTLINERMODE_TITLEOBJECT ); 2496 aString += rString; 2497 } 2498 break; 2499 2500 default: 2501 { 2502 pOutl->Init( OUTLINERMODE_TEXTOBJECT ); 2503 aString += rString; 2504 2505 // check if we need to add a text field 2506 SvxFieldData* pData = NULL; 2507 2508 switch( eObjKind ) 2509 { 2510 case PRESOBJ_HEADER: 2511 pData = new SvxHeaderField(); 2512 break; 2513 case PRESOBJ_FOOTER: 2514 pData = new SvxFooterField(); 2515 break; 2516 case PRESOBJ_SLIDENUMBER: 2517 pData = new SvxPageField(); 2518 break; 2519 case PRESOBJ_DATETIME: 2520 pData = new SvxDateTimeField(); 2521 break; 2522 default: 2523 break; 2524 } 2525 2526 if( pData ) 2527 { 2528 ESelection e; 2529 SvxFieldItem aField( *pData, EE_FEATURE_FIELD ); 2530 pOutl->QuickInsertField(aField,e); 2531 delete pData; 2532 } 2533 } 2534 break; 2535 } 2536 2537 pOutl->SetPaperSize( pObj->GetLogicRect().GetSize() ); 2538 2539 if( aString.Len() ) 2540 pOutl->SetText( aString, pOutl->GetParagraph( 0 ) ); 2541 2542 ( (SdrTextObj*) pObj)->SetOutlinerParaObject( pOutl->CreateParaObject() ); 2543 2544 if (!pOutliner) 2545 { 2546 delete pOutl; 2547 pOutl = NULL; 2548 } 2549 else 2550 { 2551 // Outliner restaurieren 2552 pOutl->Init( nOutlMode ); 2553 pOutl->SetParaAttribs( 0, pOutl->GetEmptyItemSet() ); 2554 pOutl->SetUpdateMode( bUpdateMode ); 2555 pOutl->SetPaperSize( aPaperSize ); 2556 } 2557 } 2558 } 2559 2560 /************************************************************************* 2561 |* 2562 |* Link & Daten von einem VControl empfangen 2563 |* 2564 \************************************************************************/ 2565 2566 void SdPage::SetLinkData(const String&, const String& ) 2567 { 2568 } 2569 2570 /************************************************************************* 2571 |* 2572 |* Layoutname setzen 2573 |* 2574 \************************************************************************/ 2575 void SdPage::SetLayoutName(String aName) 2576 { 2577 maLayoutName = aName; 2578 2579 if( mbMaster ) 2580 { 2581 String aSep( RTL_CONSTASCII_USTRINGPARAM(SD_LT_SEPARATOR) ); 2582 sal_uInt16 nPos = maLayoutName.Search( aSep ); 2583 if ( nPos != STRING_NOTFOUND ) 2584 { 2585 FmFormPage::SetName(maLayoutName.Copy(0, nPos)); 2586 } 2587 } 2588 } 2589 2590 2591 /************************************************************************* 2592 |* 2593 |* Seitenname zurueckgeben und ggf. generieren 2594 |* 2595 \************************************************************************/ 2596 2597 const String& SdPage::GetName() const 2598 { 2599 String aCreatedPageName( maCreatedPageName ); 2600 if (GetRealName().Len() == 0) 2601 { 2602 if ((mePageKind == PK_STANDARD || mePageKind == PK_NOTES) && !mbMaster) 2603 { 2604 // default name for handout pages 2605 sal_uInt16 nNum = (GetPageNum() + 1) / 2; 2606 2607 aCreatedPageName = String(SdResId(STR_PAGE)); 2608 aCreatedPageName += sal_Unicode( ' ' ); 2609 if( GetModel()->GetPageNumType() == SVX_NUMBER_NONE ) 2610 { 2611 // if the document has number none as a formating 2612 // for page numbers we still default to arabic numbering 2613 // to keep the default page names unique 2614 aCreatedPageName += String::CreateFromInt32( (sal_Int32)nNum ); 2615 } 2616 else 2617 { 2618 aCreatedPageName += ((SdDrawDocument*) GetModel())->CreatePageNumValue(nNum); 2619 } 2620 } 2621 else 2622 { 2623 /****************************************************************** 2624 * Defaultname fuer Handzettelseiten 2625 ******************************************************************/ 2626 aCreatedPageName = String(SdResId(STR_LAYOUT_DEFAULT_NAME)); 2627 } 2628 } 2629 else 2630 { 2631 aCreatedPageName = GetRealName(); 2632 } 2633 2634 if (mePageKind == PK_NOTES) 2635 { 2636 aCreatedPageName += sal_Unicode( ' ' ); 2637 aCreatedPageName += String(SdResId(STR_NOTES)); 2638 } 2639 else if (mePageKind == PK_HANDOUT && mbMaster) 2640 { 2641 aCreatedPageName += String::CreateFromAscii( RTL_CONSTASCII_STRINGPARAM( " (" )); 2642 aCreatedPageName += String(SdResId(STR_HANDOUT)); 2643 aCreatedPageName += sal_Unicode( ')' ); 2644 } 2645 2646 const_cast< SdPage* >(this)->maCreatedPageName = aCreatedPageName; 2647 return maCreatedPageName; 2648 } 2649 2650 /************************************************************************* 2651 |* 2652 |* 2653 |* 2654 \************************************************************************/ 2655 2656 void SdPage::SetOrientation( Orientation eOrient) 2657 { 2658 meOrientation = eOrient; 2659 } 2660 2661 /************************************************************************* 2662 |* 2663 |* 2664 |* 2665 \************************************************************************/ 2666 2667 Orientation SdPage::GetOrientation() const 2668 { 2669 return meOrientation; 2670 } 2671 2672 /************************************************************************* 2673 |* 2674 |* Liefert den Default-Text eines PresObjektes zurueck 2675 |* 2676 \************************************************************************/ 2677 2678 String SdPage::GetPresObjText(PresObjKind eObjKind) const 2679 { 2680 String aString; 2681 2682 if (eObjKind == PRESOBJ_TITLE) 2683 { 2684 if (mbMaster) 2685 { 2686 if (mePageKind != PK_NOTES) 2687 { 2688 aString = String ( SdResId( STR_PRESOBJ_MPTITLE ) ); 2689 } 2690 else 2691 { 2692 aString = String ( SdResId( STR_PRESOBJ_MPNOTESTITLE ) ); 2693 } 2694 } 2695 else 2696 { 2697 aString = String ( SdResId( STR_PRESOBJ_TITLE ) ); 2698 } 2699 } 2700 else if (eObjKind == PRESOBJ_OUTLINE) 2701 { 2702 if (mbMaster) 2703 { 2704 aString = String ( SdResId( STR_PRESOBJ_MPOUTLINE ) ); 2705 } 2706 else 2707 { 2708 aString = String ( SdResId( STR_PRESOBJ_OUTLINE ) ); 2709 } 2710 } 2711 else if (eObjKind == PRESOBJ_NOTES) 2712 { 2713 if (mbMaster) 2714 { 2715 aString = String ( SdResId( STR_PRESOBJ_MPNOTESTEXT ) ); 2716 } 2717 else 2718 { 2719 aString = String ( SdResId( STR_PRESOBJ_NOTESTEXT ) ); 2720 } 2721 } 2722 else if (eObjKind == PRESOBJ_TEXT) 2723 { 2724 aString = String ( SdResId( STR_PRESOBJ_TEXT ) ); 2725 } 2726 else if (eObjKind == PRESOBJ_GRAPHIC) 2727 { 2728 aString = String ( SdResId( STR_PRESOBJ_GRAPHIC ) ); 2729 } 2730 else if (eObjKind == PRESOBJ_OBJECT) 2731 { 2732 aString = String ( SdResId( STR_PRESOBJ_OBJECT ) ); 2733 } 2734 else if (eObjKind == PRESOBJ_CHART) 2735 { 2736 aString = String ( SdResId( STR_PRESOBJ_CHART ) ); 2737 } 2738 else if (eObjKind == PRESOBJ_ORGCHART) 2739 { 2740 aString = String ( SdResId( STR_PRESOBJ_ORGCHART ) ); 2741 } 2742 else if (eObjKind == PRESOBJ_CALC) 2743 { 2744 aString = String ( SdResId( STR_PRESOBJ_TABLE ) ); 2745 } 2746 2747 return(aString); 2748 } 2749 2750 extern uno::Reference< uno::XInterface > createUnoPageImpl( SdPage* pPage ); 2751 2752 uno::Reference< uno::XInterface > SdPage::createUnoPage() 2753 { 2754 return createUnoPageImpl( this ); 2755 } 2756 2757 /** returns the SdPage implementation for the given XDrawPage or 0 if not available */ 2758 SdPage* SdPage::getImplementation( const ::com::sun::star::uno::Reference< ::com::sun::star::drawing::XDrawPage >& xPage ) 2759 { 2760 try 2761 { 2762 ::com::sun::star::uno::Reference< ::com::sun::star::lang::XUnoTunnel > xUnoTunnel( xPage, ::com::sun::star::uno::UNO_QUERY ); 2763 if( xUnoTunnel.is() ) 2764 { 2765 SvxDrawPage* pUnoPage = reinterpret_cast<SvxDrawPage*>(sal::static_int_cast<sal_uIntPtr>(xUnoTunnel->getSomething( SvxDrawPage::getUnoTunnelId()) ) ); 2766 if( pUnoPage ) 2767 return static_cast< SdPage* >( pUnoPage->GetSdrPage() ); 2768 } 2769 } 2770 catch( ::com::sun::star::uno::Exception& e ) 2771 { 2772 (void)e; 2773 DBG_ERROR("sd::SdPage::getImplementation(), exception cathced!" ); 2774 } 2775 2776 return 0; 2777 } 2778 2779 void SdPage::SetName (const String& rName) 2780 { 2781 String aOldName = GetName(); 2782 FmFormPage::SetName (rName); 2783 static_cast<SdDrawDocument*>(pModel)->UpdatePageRelativeURLs(aOldName, rName); 2784 ActionChanged(); 2785 } 2786 2787 const HeaderFooterSettings& SdPage::getHeaderFooterSettings() const 2788 { 2789 if( mePageKind == PK_HANDOUT && !mbMaster ) 2790 { 2791 return (((SdPage&)TRG_GetMasterPage()).maHeaderFooterSettings); 2792 } 2793 else 2794 { 2795 return maHeaderFooterSettings; 2796 } 2797 } 2798 2799 void SdPage::setHeaderFooterSettings( const sd::HeaderFooterSettings& rNewSettings ) 2800 { 2801 if( mePageKind == PK_HANDOUT && !mbMaster ) 2802 { 2803 (((SdPage&)TRG_GetMasterPage()).maHeaderFooterSettings) = rNewSettings; 2804 } 2805 else 2806 { 2807 maHeaderFooterSettings = rNewSettings; 2808 } 2809 2810 SetChanged(); 2811 if(TRG_HasMasterPage()) 2812 { 2813 TRG_GetMasterPageDescriptorViewContact().ActionChanged(); 2814 } 2815 } 2816 2817 bool SdPage::checkVisibility( 2818 const sdr::contact::ViewObjectContact& rOriginal, 2819 const sdr::contact::DisplayInfo& rDisplayInfo, 2820 bool bEdit ) 2821 { 2822 if( !FmFormPage::checkVisibility( rOriginal, rDisplayInfo, bEdit ) ) 2823 return false; 2824 2825 SdrObject* pObj = rOriginal.GetViewContact().TryToGetSdrObject(); 2826 if( pObj == NULL ) 2827 return false; 2828 2829 const SdrPage* pVisualizedPage = GetSdrPageFromXDrawPage(rOriginal.GetObjectContact().getViewInformation2D().getVisualizedPage()); 2830 const bool bIsPrinting(rOriginal.GetObjectContact().isOutputToPrinter() || rOriginal.GetObjectContact().isOutputToPDFFile()); 2831 const SdrPageView* pPageView = rOriginal.GetObjectContact().TryToGetSdrPageView(); 2832 const bool bIsInsidePageObj(pPageView && pPageView->GetPage() != pVisualizedPage); 2833 2834 // empty presentation objects only visible during edit mode 2835 if( (bIsPrinting || !bEdit || bIsInsidePageObj ) && pObj->IsEmptyPresObj() ) 2836 { 2837 if( (pObj->GetObjInventor() != SdrInventor) || ( (pObj->GetObjIdentifier() != OBJ_RECT) && (pObj->GetObjIdentifier() != OBJ_PAGE) ) ) 2838 return false; 2839 } 2840 2841 if( ( pObj->GetObjInventor() == SdrInventor ) && ( pObj->GetObjIdentifier() == OBJ_TEXT ) ) 2842 { 2843 const SdPage* pCheckPage = dynamic_cast< const SdPage* >(pObj->GetPage()); 2844 2845 if( pCheckPage ) 2846 { 2847 PresObjKind eKind = pCheckPage->GetPresObjKind(pObj); 2848 2849 if((eKind == PRESOBJ_FOOTER) || (eKind == PRESOBJ_HEADER) || (eKind == PRESOBJ_DATETIME) || (eKind == PRESOBJ_SLIDENUMBER) ) 2850 { 2851 const bool bSubContentProcessing(rDisplayInfo.GetSubContentActive()); 2852 2853 if( bSubContentProcessing || ( pCheckPage->GetPageKind() == PK_HANDOUT && bIsPrinting ) ) 2854 { 2855 // use the page that is currently processed 2856 const SdPage* pVisualizedSdPage = dynamic_cast< const SdPage* >(pVisualizedPage); 2857 2858 if( pVisualizedSdPage ) 2859 { 2860 // if we are not on a masterpage, see if we have to draw this header&footer object at all 2861 const sd::HeaderFooterSettings& rSettings = pVisualizedSdPage->getHeaderFooterSettings(); 2862 2863 switch( eKind ) 2864 { 2865 case PRESOBJ_FOOTER: 2866 return rSettings.mbFooterVisible; 2867 case PRESOBJ_HEADER: 2868 return rSettings.mbHeaderVisible; 2869 case PRESOBJ_DATETIME: 2870 return rSettings.mbDateTimeVisible; 2871 case PRESOBJ_SLIDENUMBER: 2872 return rSettings.mbSlideNumberVisible; 2873 default: 2874 break; 2875 } 2876 } 2877 } 2878 } // check for placeholders on master 2879 else if( (eKind != PRESOBJ_NONE) && pCheckPage->IsMasterPage() && ( pVisualizedPage != pCheckPage ) ) 2880 { 2881 // presentation objects on master slide are always invisible if slide is shown. 2882 return false; 2883 } 2884 } 2885 } 2886 2887 // i63977, do not print SdrpageObjs from master pages 2888 if( ( pObj->GetObjInventor() == SdrInventor ) && ( pObj->GetObjIdentifier() == OBJ_PAGE ) ) 2889 { 2890 if( pObj->GetPage() && pObj->GetPage()->IsMasterPage() ) 2891 return false; 2892 } 2893 2894 return true; 2895 } 2896 2897 bool SdPage::RestoreDefaultText( SdrObject* pObj ) 2898 { 2899 bool bRet = false; 2900 2901 SdrTextObj* pTextObj = dynamic_cast< SdrTextObj* >( pObj ); 2902 2903 if( pTextObj ) 2904 { 2905 PresObjKind ePresObjKind = GetPresObjKind(pTextObj); 2906 2907 if (ePresObjKind == PRESOBJ_TITLE || 2908 ePresObjKind == PRESOBJ_OUTLINE || 2909 ePresObjKind == PRESOBJ_NOTES || 2910 ePresObjKind == PRESOBJ_TEXT) 2911 { 2912 String aString( GetPresObjText(ePresObjKind) ); 2913 2914 if (aString.Len()) 2915 { 2916 sal_Bool bVertical = sal_False; 2917 OutlinerParaObject* pOldPara = pTextObj->GetOutlinerParaObject(); 2918 if( pOldPara ) 2919 bVertical = pOldPara->IsVertical(); // is old para object vertical? 2920 2921 SetObjText( pTextObj, 0, ePresObjKind, aString ); 2922 2923 if( pOldPara ) 2924 { 2925 //pTextObj->SetVerticalWriting( bVertical ); 2926 // 2927 // #94826# Here, only the vertical flag for the 2928 // OutlinerParaObjects needs to be changed. The 2929 // AutoGrowWidth/Height items still exist in the 2930 // not changed object. 2931 if(pTextObj 2932 && pTextObj->GetOutlinerParaObject() 2933 && pTextObj->GetOutlinerParaObject()->IsVertical() != (bool)bVertical) 2934 { 2935 Rectangle aObjectRect = pTextObj->GetSnapRect(); 2936 pTextObj->GetOutlinerParaObject()->SetVertical(bVertical); 2937 pTextObj->SetSnapRect(aObjectRect); 2938 } 2939 } 2940 2941 pTextObj->SetTextEditOutliner( NULL ); // to make stylesheet settings work 2942 pTextObj->NbcSetStyleSheet( GetStyleSheetForPresObj(ePresObjKind), sal_True ); 2943 pTextObj->SetEmptyPresObj(sal_True); 2944 bRet = true; 2945 } 2946 } 2947 } 2948 return bRet; 2949 } 2950 2951 void SdPage::CalculateHandoutAreas( SdDrawDocument& rModel, AutoLayout eLayout, bool bHorizontal, std::vector< Rectangle >& rAreas ) 2952 { 2953 SdPage& rHandoutMaster = *rModel.GetMasterSdPage( 0, PK_HANDOUT ); 2954 2955 if( eLayout == AUTOLAYOUT_NONE ) 2956 { 2957 // use layout from handout master 2958 SdrObjListIter aShapeIter (rHandoutMaster); 2959 while (aShapeIter.IsMore()) 2960 { 2961 SdrPageObj* pPageObj = dynamic_cast<SdrPageObj*>(aShapeIter.Next()); 2962 if (pPageObj) 2963 rAreas.push_back( pPageObj->GetCurrentBoundRect() ); 2964 } 2965 } 2966 else 2967 { 2968 Size aArea = rHandoutMaster.GetSize(); 2969 2970 const long nGapW = 1000; // gap is 1cm 2971 const long nGapH = 1000; 2972 2973 long nLeftBorder = rHandoutMaster.GetLftBorder(); 2974 long nRightBorder = rHandoutMaster.GetRgtBorder(); 2975 long nTopBorder = rHandoutMaster.GetUppBorder(); 2976 long nBottomBorder = rHandoutMaster.GetLwrBorder(); 2977 2978 const long nHeaderFooterHeight = static_cast< long >( (aArea.Height() - nTopBorder - nLeftBorder) * 0.05 ); 2979 2980 nTopBorder += nHeaderFooterHeight; 2981 nBottomBorder += nHeaderFooterHeight; 2982 2983 long nX = nGapW + nLeftBorder; 2984 long nY = nGapH + nTopBorder; 2985 2986 aArea.Width() -= nGapW * 2 + nLeftBorder + nRightBorder; 2987 aArea.Height() -= nGapH * 2 + nTopBorder + nBottomBorder; 2988 2989 const bool bLandscape = aArea.Width() > aArea.Height(); 2990 2991 static sal_uInt16 aOffsets[5][9] = 2992 { 2993 { 0, 1, 2, 3, 4, 5, 6, 7, 8 }, // AUTOLAYOUT_HANDOUT9, Portrait, Horizontal order 2994 { 0, 2, 4, 1, 3, 5, 0, 0, 0 }, // AUTOLAYOUT_HANDOUT3, Landscape, Vertical 2995 { 0, 2, 1, 3, 0, 0, 0, 0, 0 }, // AUTOLAYOUT_HANDOUT4, Landscape, Vertical 2996 { 0, 3, 1, 4, 2, 5, 0, 0, 0 }, // AUTOLAYOUT_HANDOUT4, Portrait, Vertical 2997 { 0, 3, 6, 1, 4, 7, 2, 5, 8 }, // AUTOLAYOUT_HANDOUT9, Landscape, Vertical 2998 }; 2999 3000 sal_uInt16* pOffsets = aOffsets[0]; 3001 sal_uInt16 nColCnt = 0, nRowCnt = 0; 3002 switch ( eLayout ) 3003 { 3004 case AUTOLAYOUT_HANDOUT1: 3005 nColCnt = 1; nRowCnt = 1; 3006 break; 3007 3008 case AUTOLAYOUT_HANDOUT2: 3009 if( bLandscape ) 3010 { 3011 nColCnt = 2; nRowCnt = 1; 3012 } 3013 else 3014 { 3015 nColCnt = 1; nRowCnt = 2; 3016 } 3017 break; 3018 3019 case AUTOLAYOUT_HANDOUT3: 3020 if( bLandscape ) 3021 { 3022 nColCnt = 3; nRowCnt = 2; 3023 } 3024 else 3025 { 3026 nColCnt = 2; nRowCnt = 3; 3027 } 3028 pOffsets = aOffsets[ bLandscape ? 1 : 0 ]; 3029 break; 3030 3031 case AUTOLAYOUT_HANDOUT4: 3032 nColCnt = 2; nRowCnt = 2; 3033 pOffsets = aOffsets[ bHorizontal ? 0 : 2 ]; 3034 break; 3035 3036 case AUTOLAYOUT_HANDOUT6: 3037 if( bLandscape ) 3038 { 3039 nColCnt = 3; nRowCnt = 2; 3040 } 3041 else 3042 { 3043 nColCnt = 2; nRowCnt = 3; 3044 } 3045 if( !bHorizontal ) 3046 pOffsets = aOffsets[ bLandscape ? 1 : 3 ]; 3047 break; 3048 3049 default: 3050 case AUTOLAYOUT_HANDOUT9: 3051 nColCnt = 3; nRowCnt = 3; 3052 3053 if( !bHorizontal ) 3054 pOffsets = aOffsets[4]; 3055 break; 3056 } 3057 3058 rAreas.resize( nColCnt * nRowCnt ); 3059 3060 Size aPartArea, aSize; 3061 aPartArea.Width() = ((aArea.Width() - ((nColCnt-1) * nGapW) ) / nColCnt); 3062 aPartArea.Height() = ((aArea.Height() - ((nRowCnt-1) * nGapH) ) / nRowCnt); 3063 3064 SdrPage* pFirstPage = rModel.GetMasterSdPage(0, PK_STANDARD); 3065 if ( pFirstPage ) 3066 { 3067 // scale actual size into handout rect 3068 double fScale = (double)aPartArea.Width() / (double)pFirstPage->GetWdt(); 3069 3070 aSize.Height() = (long)(fScale * pFirstPage->GetHgt() ); 3071 if( aSize.Height() > aPartArea.Height() ) 3072 { 3073 fScale = (double)aPartArea.Height() / (double)pFirstPage->GetHgt(); 3074 aSize.Height() = aPartArea.Height(); 3075 aSize.Width() = (long)(fScale * pFirstPage->GetWdt()); 3076 } 3077 else 3078 { 3079 aSize.Width() = aPartArea.Width(); 3080 } 3081 3082 nX += (aPartArea.Width() - aSize.Width()) / 2; 3083 nY += (aPartArea.Height()- aSize.Height())/ 2; 3084 } 3085 else 3086 { 3087 aSize = aPartArea; 3088 } 3089 3090 Point aPos( nX, nY ); 3091 3092 const bool bRTL = rModel.GetDefaultWritingMode() == ::com::sun::star::text::WritingMode_RL_TB; 3093 3094 const long nOffsetX = (aPartArea.Width() + nGapW) * (bRTL ? -1 : 1); 3095 const long nOffsetY = aPartArea.Height() + nGapH; 3096 const long nStartX = bRTL ? nOffsetX*(1 - nColCnt) - nX : nX; 3097 3098 for(sal_uInt16 nRow = 0; nRow < nRowCnt; nRow++) 3099 { 3100 aPos.X() = nStartX; 3101 for(sal_uInt16 nCol = 0; nCol < nColCnt; nCol++) 3102 { 3103 rAreas[*pOffsets++] = Rectangle(aPos, aSize); 3104 aPos.X() += nOffsetX; 3105 } 3106 3107 aPos.Y() += nOffsetY; 3108 } 3109 } 3110 } 3111 3112 3113 3114 3115 void SdPage::SetPrecious (const bool bIsPrecious) 3116 { 3117 mbIsPrecious = bIsPrecious; 3118 } 3119 3120 3121 3122 3123 bool SdPage::IsPrecious (void) const 3124 { 3125 return mbIsPrecious; 3126 } 3127 3128 3129 3130 3131 HeaderFooterSettings::HeaderFooterSettings() 3132 { 3133 mbHeaderVisible = true; 3134 mbFooterVisible = true; 3135 mbSlideNumberVisible = false; 3136 mbDateTimeVisible = true; 3137 mbDateTimeIsFixed = true; 3138 meDateTimeFormat = SVXDATEFORMAT_A; 3139 } 3140 3141 bool HeaderFooterSettings::operator==( const HeaderFooterSettings& rSettings ) const 3142 { 3143 return (mbHeaderVisible == rSettings.mbHeaderVisible) && 3144 (maHeaderText == rSettings.maHeaderText) && 3145 (mbFooterVisible == rSettings.mbFooterVisible) && 3146 (maFooterText == rSettings.maFooterText) && 3147 (mbSlideNumberVisible == rSettings.mbSlideNumberVisible) && 3148 (mbDateTimeVisible == rSettings.mbDateTimeVisible) && 3149 (mbDateTimeIsFixed == rSettings.mbDateTimeIsFixed) && 3150 (meDateTimeFormat == rSettings.meDateTimeFormat) && 3151 (maDateTimeText == rSettings.maDateTimeText); 3152 } 3153 3154