xref: /AOO41X/main/sd/source/ui/view/drviewsc.cxx (revision ca62e2c2083b5d0995f1245bad6c2edfb455fbec)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sd.hxx"

#include "DrawViewShell.hxx"
#include "ViewShellImplementation.hxx"
#include <vcl/waitobj.hxx>

#ifndef _SVXIDS_HRC
#include <svx/svxids.hrc>
#endif
#include <svx/dialogs.hrc>
#ifndef _IMAPDLG_HXX
#include <svx/imapdlg.hxx>
#endif
#include <vcl/msgbox.hxx>
#include <sfx2/request.hxx>
#include <svx/svdogrp.hxx>
#include <svx/svdoole2.hxx>
#include <svx/svdograf.hxx>
#include <svx/svxdlg.hxx>
#ifndef _BINDING_HXX //autogen
#include <sfx2/bindings.hxx>
#endif
#include <sfx2/dispatch.hxx>
#include <svx/svdoole2.hxx>
#include <svl/style.hxx>
#include <svx/svdpagv.hxx>
#include <svx/grafctrl.hxx>
#include "stlsheet.hxx"

#include <sfx2/viewfrm.hxx>

#include "app.hrc"
#include "strings.hrc"
#include "helpids.h"
#include "misc.hxx"
#include "Window.hxx"
#include "imapinfo.hxx"
#include "futempl.hxx"
#include "fusel.hxx"
#include "sdresid.hxx"
#include "drawdoc.hxx"
#include "DrawDocShell.hxx"
#include "drawview.hxx"
#include "sdabstdlg.hxx"
#include "brkdlg.hrc"
namespace sd {

#define	MIN_ACTIONS_FOR_DIALOG	5000	// bei mehr als 1600 Metaobjekten
										// wird beim Aufbrechen ein Dialog
										// angezeigt.
/*************************************************************************
|*
|* SfxRequests fuer temporaere Funktionen
|*
\************************************************************************/

void DrawViewShell::FuTemp03(SfxRequest& rReq)
{
	sal_uInt16 nSId = rReq.GetSlot();
	switch( nSId )
	{
		case SID_GROUP:  // BASIC
		{
			if ( mpDrawView->IsPresObjSelected( sal_True, sal_True, sal_True ) )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				mpDrawView->GroupMarked();
			}
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_UNGROUP:  // BASIC
		{
			mpDrawView->UnGroupMarked();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_NAME_GROUP:
		{
			// only allow for single object selection since the name of an object needs
			// to be unique
			if(1L == mpDrawView->GetMarkedObjectCount())
			{
				// #i68101#
				SdrObject* pSelected = mpDrawView->GetMarkedObjectByIndex(0L);
				OSL_ENSURE(pSelected, "DrawViewShell::FuTemp03: nMarkCount, but no object (!)");
				String aName(pSelected->GetName());

				SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
				OSL_ENSURE(pFact, "Dialogdiet fail!");
				AbstractSvxObjectNameDialog* pDlg = pFact->CreateSvxObjectNameDialog(NULL, aName);
				OSL_ENSURE(pDlg, "Dialogdiet fail!");

				pDlg->SetCheckNameHdl(LINK(this, DrawViewShell, NameObjectHdl));

				if(RET_OK == pDlg->Execute())
				{
					pDlg->GetName(aName);
					pSelected->SetName(aName);
				}

				delete pDlg;
			}

			SfxBindings& rBindings = GetViewFrame()->GetBindings();
			rBindings.Invalidate( SID_NAVIGATOR_STATE, sal_True, sal_False );
			rBindings.Invalidate( SID_CONTEXT );

			Cancel();
			rReq.Ignore();
			break;
		}

		// #i68101#
		case SID_OBJECT_TITLE_DESCRIPTION:
		{
			if(1L == mpDrawView->GetMarkedObjectCount())
			{
				SdrObject* pSelected = mpDrawView->GetMarkedObjectByIndex(0L);
				OSL_ENSURE(pSelected, "DrawViewShell::FuTemp03: nMarkCount, but no object (!)");
				String aTitle(pSelected->GetTitle());
				String aDescription(pSelected->GetDescription());

				SvxAbstractDialogFactory* pFact = SvxAbstractDialogFactory::Create();
				OSL_ENSURE(pFact, "Dialogdiet fail!");
				AbstractSvxObjectTitleDescDialog* pDlg = pFact->CreateSvxObjectTitleDescDialog(NULL, aTitle, aDescription);
				OSL_ENSURE(pDlg, "Dialogdiet fail!");

				if(RET_OK == pDlg->Execute())
				{
					pDlg->GetTitle(aTitle);
					pDlg->GetDescription(aDescription);
					pSelected->SetTitle(aTitle);
					pSelected->SetDescription(aDescription);
				}

				delete pDlg;
			}

			SfxBindings& rBindings = GetViewFrame()->GetBindings();
			rBindings.Invalidate( SID_NAVIGATOR_STATE, sal_True, sal_False );
			rBindings.Invalidate( SID_CONTEXT );

			Cancel();
			rReq.Ignore();
			break;
		}

		case SID_ENTER_GROUP:  // BASIC
		{
			mpDrawView->EnterMarkedGroup();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_LEAVE_GROUP:  // BASIC
		{
			mpDrawView->LeaveOneGroup();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_LEAVE_ALL_GROUPS:  // BASIC
		{
			mpDrawView->LeaveAllGroup();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_COMBINE:  // BASIC
		{
			// #88224# End text edit to avoid conflicts
			if(mpDrawView->IsTextEdit())
				mpDrawView->SdrEndTextEdit();

			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->CombineMarkedObjects(sal_False);
			}
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_DISTRIBUTE_DLG:
		{
			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				mpDrawView->DistributeMarkedObjects();
			}
			Cancel();
			rReq.Done ();
		}
		break;

        case SID_POLY_MERGE:
		{
			// #88224# End text edit to avoid conflicts
			if(mpDrawView->IsTextEdit())
				mpDrawView->SdrEndTextEdit();

			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->MergeMarkedObjects(SDR_MERGE_MERGE);
			}
			Cancel();
			rReq.Done ();
		}
		break;

        case SID_POLY_SUBSTRACT:
		{
			// #88224# End text edit to avoid conflicts
			if(mpDrawView->IsTextEdit())
				mpDrawView->SdrEndTextEdit();

			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->MergeMarkedObjects(SDR_MERGE_SUBSTRACT);
			}
			Cancel();
			rReq.Done ();
		}
		break;

        case SID_POLY_INTERSECT:
		{
			// #88224# End text edit to avoid conflicts
			if(mpDrawView->IsTextEdit())
				mpDrawView->SdrEndTextEdit();

			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->MergeMarkedObjects(SDR_MERGE_INTERSECT);
			}
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_DISMANTLE:  // BASIC
		{
			if ( mpDrawView->IsDismantlePossible(sal_False) )
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->DismantleMarkedObjects(sal_False);
			}
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_CONNECT:  // BASIC
		{
			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->CombineMarkedObjects(sal_True);
			}
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_BREAK:  // BASIC
		{
			if ( mpDrawView->IsTextEdit() )
			{
				mpDrawView->SdrEndTextEdit();
			}

            if ( mpDrawView->IsBreak3DObjPossible() )
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
                mpDrawView->Break3DObj();
			}
            else if ( mpDrawView->IsDismantlePossible(sal_True) )
			{
				WaitObject aWait( (Window*)GetActiveWindow() );
				mpDrawView->DismantleMarkedObjects(sal_True);
            }
            else if ( mpDrawView->IsImportMtfPossible() )
			{

				WaitObject aWait( (Window*)GetActiveWindow() );
				const SdrMarkList& rMarkList = mpDrawView->GetMarkedObjectList();
				sal_uLong nAnz=rMarkList.GetMarkCount();

				// Summe der Metaobjekte aller sel. Metafiles erm.
				sal_uLong nCount = 0;
				for(sal_uLong nm=0; nm<nAnz; nm++)
				{
					SdrMark*     pM=rMarkList.GetMark(nm);
				    SdrObject*   pObj=pM->GetMarkedSdrObj();
				    SdrGrafObj*  pGraf=PTR_CAST(SdrGrafObj,pObj);
					SdrOle2Obj*  pOle2=PTR_CAST(SdrOle2Obj,pObj);

                    if(pGraf)
                    {
                        if(pGraf->HasGDIMetaFile())
                        {
                            nCount += pGraf->GetGraphic().GetGDIMetaFile().GetActionCount();
                        }
                        else if(pGraf->isEmbeddedSvg())
                        {
                            nCount += pGraf->getMetafileFromEmbeddedSvg().GetActionCount();
                        }
                    }

                    if(pOle2 && pOle2->GetGraphic())
                    {
                        nCount += pOle2->GetGraphic()->GetGDIMetaFile().GetActionCount();
                    }
				}

				// anhand der erm. Summe entscheiden ob mit
				// oder ohne Dialog aufgebrochen wird.
				if(nCount < MIN_ACTIONS_FOR_DIALOG)
				{
					// ohne Dialog aufbrechen
					mpDrawView->DoImportMarkedMtf();
				}
				else
				{
					SdAbstractDialogFactory* pFact = SdAbstractDialogFactory::Create();
					if( pFact )
					{
						VclAbstractDialog* pDlg = pFact->CreateBreakDlg(GetActiveWindow(), mpDrawView, GetDocSh(), nCount, nAnz );
						if( pDlg )
						{
							pDlg->Execute();
							delete pDlg;
						}
					}
				}
			}

			Cancel();
			rReq.Done ();
		}
		break;

		case SID_CONVERT_TO_3D:
		{
			if ( mpDrawView->IsPresObjSelected() )
			{
                ::sd::Window* pWindow = GetActiveWindow();
                InfoBox(pWindow, String(SdResId(STR_ACTION_NOTPOSSIBLE) ) ).Execute();
			}
			else
			{
				if (mpDrawView->IsConvertTo3DObjPossible())
				{
					if (mpDrawView->IsTextEdit())
					{
						mpDrawView->SdrEndTextEdit();
					}

					WaitObject aWait( (Window*)GetActiveWindow() );
					mpDrawView->ConvertMarkedObjTo3D(sal_True);
				}
			}

			Cancel();
			rReq.Done();
		}
		break;

		case SID_FRAME_TO_TOP:	// BASIC
		{
			mpDrawView->PutMarkedToTop();
			Cancel();
			Invalidate( SID_POSITION );
			rReq.Done ();
		}
		break;

		case SID_MOREFRONT:  // BASIC
		{
			mpDrawView->MovMarkedToTop();
			Cancel();
			Invalidate( SID_POSITION );
			rReq.Done ();
		}
		break;

		case SID_MOREBACK:	// BASIC
		{
			mpDrawView->MovMarkedToBtm();
			Cancel();
			Invalidate( SID_POSITION );
			rReq.Done ();
		}
		break;

		case SID_FRAME_TO_BOTTOM:	// BASIC
		{
			mpDrawView->PutMarkedToBtm();
			Cancel();
			Invalidate( SID_POSITION );
			rReq.Done ();
		}
		break;

		case SID_HORIZONTAL:  // BASIC
        case SID_FLIP_HORIZONTAL:
		{
            mpDrawView->MirrorAllMarkedHorizontal();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_VERTICAL:	// BASIC
        case SID_FLIP_VERTICAL:
		{
			mpDrawView->MirrorAllMarkedVertical();
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_LEFT:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_LEFT, SDRVALIGN_NONE);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_CENTER:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_CENTER, SDRVALIGN_NONE);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_RIGHT:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_RIGHT, SDRVALIGN_NONE);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_UP:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_NONE, SDRVALIGN_TOP);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_MIDDLE:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_NONE, SDRVALIGN_CENTER);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_OBJECT_ALIGN_DOWN:  // BASIC
		{
			mpDrawView->AlignMarkedObjects(SDRHALIGN_NONE, SDRVALIGN_BOTTOM);
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_SELECTALL:  // BASIC
		{
            if( (dynamic_cast<FuSelection*>( GetOldFunction().get() ) != 0) &&
                !GetView()->IsFrameDragSingles() && GetView()->HasMarkablePoints())
			{
				if ( !mpDrawView->IsAction() )
					mpDrawView->MarkAllPoints();
			}
			else
				mpDrawView->SelectAll();

			Cancel();
			rReq.Done ();
		}
		break;

		case SID_STYLE_NEW:	// BASIC ???
		case SID_STYLE_APPLY:
		case SID_STYLE_EDIT:
		case SID_STYLE_DELETE:
		case SID_STYLE_FAMILY:
		case SID_STYLE_WATERCAN:
		case SID_STYLE_UPDATE_BY_EXAMPLE:
		case SID_STYLE_NEW_BY_EXAMPLE:
		{
			if( rReq.GetSlot() == SID_STYLE_EDIT && !rReq.GetArgs() )
			{
				SfxStyleSheet* pStyleSheet = mpDrawView->GetStyleSheet();
				if( pStyleSheet && pStyleSheet->GetFamily() == SD_STYLE_FAMILY_MASTERPAGE)
					pStyleSheet = ((SdStyleSheet*)pStyleSheet)->GetPseudoStyleSheet();

				if( (pStyleSheet == NULL) && GetView()->IsTextEdit() )
				{
					GetView()->SdrEndTextEdit();

					pStyleSheet = mpDrawView->GetStyleSheet();
					if(pStyleSheet && pStyleSheet->GetFamily() == SD_STYLE_FAMILY_MASTERPAGE)
						pStyleSheet = ((SdStyleSheet*)pStyleSheet)->GetPseudoStyleSheet();
				}

				if( pStyleSheet == NULL )
				{
					rReq.Ignore();
					break;
				}

				SfxAllItemSet aSet(GetDoc()->GetPool());

				SfxStringItem aStyleNameItem( SID_STYLE_EDIT, pStyleSheet->GetName() );
				aSet.Put(aStyleNameItem);

				SfxUInt16Item aStyleFamilyItem( SID_STYLE_FAMILY, (sal_uInt16)pStyleSheet->GetFamily() );
				aSet.Put(aStyleFamilyItem);

				rReq.SetArgs(aSet);
			}

			if( rReq.GetArgs() )
			{
				SetCurrentFunction( FuTemplate::Create( this, GetActiveWindow(), mpDrawView, GetDoc(), rReq ) );
				if( rReq.GetSlot() == SID_STYLE_APPLY )
					GetViewFrame()->GetBindings().Invalidate( SID_STYLE_APPLY );
				Cancel();
			}
			else if( rReq.GetSlot() == SID_STYLE_APPLY )
				GetViewFrame()->GetDispatcher()->Execute( SID_STYLE_DESIGNER, SFX_CALLMODE_ASYNCHRON );
			rReq.Ignore ();
		}
		break;

		case SID_IMAP:
		{
			SvxIMapDlg* pDlg;
			sal_uInt16		nId = SvxIMapDlgChildWindow::GetChildWindowId();

			GetViewFrame()->ToggleChildWindow( nId );
			GetViewFrame()->GetBindings().Invalidate( SID_IMAP );

			if ( GetViewFrame()->HasChildWindow( nId )
                && ( ( pDlg = ViewShell::Implementation::GetImageMapDialog() ) != NULL ) )
			{
				const SdrMarkList&	rMarkList = mpDrawView->GetMarkedObjectList();

				if ( rMarkList.GetMarkCount() == 1 )
					UpdateIMapDlg( rMarkList.GetMark( 0 )->GetMarkedSdrObj() );
			}

			Cancel();
			rReq.Ignore ();
		}
		break;

		case SID_GRID_FRONT:
		{
			mpDrawView->SetGridFront( !mpDrawView->IsGridFront() );
			Cancel();
			rReq.Done ();
		}
		break;

		case SID_HELPLINES_FRONT:
		{
			mpDrawView->SetHlplFront( !mpDrawView->IsHlplFront() );
			Cancel();
			rReq.Done ();
		}
		break;

		default:
			FuTemp04(rReq);
		break;
	};
};

/*************************************************************************
|*
|* Liefert die globale/Haupt-ID zurueck, also die ID, ueber die die
|* Toolbox ausgeloest wird
|*
\************************************************************************/

sal_uInt16 DrawViewShell::GetIdBySubId( sal_uInt16 nSId )
{
	sal_uInt16 nMappedSId = 0;
	switch( nSId )
	{
		case SID_OBJECT_ROTATE:
		case SID_OBJECT_MIRROR:
		case SID_OBJECT_TRANSPARENCE:
		case SID_OBJECT_GRADIENT:
		case SID_OBJECT_SHEAR:
		case SID_OBJECT_CROOK_ROTATE:
		case SID_OBJECT_CROOK_SLANT:
		case SID_OBJECT_CROOK_STRETCH:
        case SID_CONVERT_TO_3D_LATHE:
		{
			nMappedSId = SID_OBJECT_CHOOSE_MODE;
		}
		break;

		case SID_OBJECT_ALIGN_LEFT:
		case SID_OBJECT_ALIGN_CENTER:
		case SID_OBJECT_ALIGN_RIGHT:
		case SID_OBJECT_ALIGN_UP:
		case SID_OBJECT_ALIGN_MIDDLE:
		case SID_OBJECT_ALIGN_DOWN:
		{
			nMappedSId = SID_OBJECT_ALIGN;
		}
		break;

		case SID_FRAME_TO_TOP:
		case SID_MOREFRONT:
		case SID_MOREBACK:
		case SID_FRAME_TO_BOTTOM:
		case SID_BEFORE_OBJ:
		case SID_BEHIND_OBJ:
		case SID_REVERSE_ORDER:
		{
			nMappedSId = SID_POSITION;
		}
		break;

		case SID_ZOOM_OUT:
		case SID_ZOOM_IN:
		case SID_SIZE_REAL:
		case SID_ZOOM_PANNING:
		case SID_SIZE_PAGE:
		case SID_SIZE_PAGE_WIDTH:
		case SID_SIZE_ALL:
		case SID_SIZE_OPTIMAL:
		case SID_ZOOM_NEXT:
		case SID_ZOOM_PREV:
		{
			nMappedSId = SID_ZOOM_TOOLBOX;
		}
		break;

		case SID_ATTR_CHAR:
		case SID_TEXT_FITTOSIZE:
		case SID_DRAW_CAPTION:
		case SID_DRAW_FONTWORK:
		case SID_DRAW_FONTWORK_VERTICAL:
		{
			nMappedSId = SID_DRAWTBX_TEXT;
		}
		break;

		case SID_DRAW_RECT:
		case SID_DRAW_SQUARE:
		case SID_DRAW_RECT_ROUND:
		case SID_DRAW_SQUARE_ROUND:
		case SID_DRAW_RECT_NOFILL:
		case SID_DRAW_SQUARE_NOFILL:
		case SID_DRAW_RECT_ROUND_NOFILL:
		case SID_DRAW_SQUARE_ROUND_NOFILL:
		{
			nMappedSId = SID_DRAWTBX_RECTANGLES;
		}
		break;

		case SID_DRAW_ELLIPSE:
		case SID_DRAW_CIRCLE:
		case SID_DRAW_PIE:
		case SID_DRAW_CIRCLEPIE:
		case SID_DRAW_ELLIPSECUT:
		case SID_DRAW_CIRCLECUT:
		case SID_DRAW_ARC:
		case SID_DRAW_CIRCLEARC:
		case SID_DRAW_ELLIPSE_NOFILL:
		case SID_DRAW_CIRCLE_NOFILL:
		case SID_DRAW_PIE_NOFILL:
		case SID_DRAW_CIRCLEPIE_NOFILL:
		case SID_DRAW_ELLIPSECUT_NOFILL:
		case SID_DRAW_CIRCLECUT_NOFILL:
		{
			nMappedSId = SID_DRAWTBX_ELLIPSES;
		}
		break;

        case SID_DRAW_BEZIER_NOFILL:
		case SID_DRAW_POLYGON_NOFILL:
		case SID_DRAW_XPOLYGON_NOFILL:
        case SID_DRAW_FREELINE_NOFILL:
        case SID_DRAW_BEZIER_FILL:
		case SID_DRAW_POLYGON:
		case SID_DRAW_XPOLYGON:
        case SID_DRAW_FREELINE:
		{
			nMappedSId = SID_DRAWTBX_LINES;
		}
		break;

		case SID_DRAW_LINE:
		case SID_DRAW_XLINE:
		case SID_DRAW_MEASURELINE:
		case SID_LINE_ARROW_START:
		case SID_LINE_ARROW_END:
		case SID_LINE_ARROWS:
		case SID_LINE_ARROW_CIRCLE:
		case SID_LINE_CIRCLE_ARROW:
		case SID_LINE_ARROW_SQUARE:
		case SID_LINE_SQUARE_ARROW:
		{
			nMappedSId = SID_DRAWTBX_ARROWS;
		}
		break;

		case SID_3D_CUBE:
		case SID_3D_TORUS:
		case SID_3D_SPHERE:
		case SID_3D_SHELL:
		case SID_3D_HALF_SPHERE:
		case SID_3D_CYLINDER:
		case SID_3D_CONE:
		case SID_3D_PYRAMID:
		{
			nMappedSId = SID_DRAWTBX_3D_OBJECTS;
		}
		break;

		case SID_INSERT_DIAGRAM:
		case SID_ATTR_TABLE:
		case SID_INSERTFILE:
		case SID_INSERT_GRAPHIC:
		case SID_INSERT_AVMEDIA:
		case SID_INSERTPAGE:
	    case SID_INSERT_MATH:
	    case SID_INSERT_FLOATINGFRAME:
	    case SID_INSERT_OBJECT:
        case SID_INSERT_PLUGIN:
		case SID_INSERT_SOUND:
		case SID_INSERT_VIDEO:
		case SID_INSERT_TABLE:
		{
			nMappedSId = SID_DRAWTBX_INSERT;
		}
		break;

        case SID_TOOL_CONNECTOR:
        case SID_CONNECTOR_ARROW_START:
        case SID_CONNECTOR_ARROW_END:
        case SID_CONNECTOR_ARROWS:
        case SID_CONNECTOR_CIRCLE_START:
        case SID_CONNECTOR_CIRCLE_END:
        case SID_CONNECTOR_CIRCLES:
        case SID_CONNECTOR_LINE:
        case SID_CONNECTOR_LINE_ARROW_START:
        case SID_CONNECTOR_LINE_ARROW_END:
        case SID_CONNECTOR_LINE_ARROWS:
        case SID_CONNECTOR_LINE_CIRCLE_START:
        case SID_CONNECTOR_LINE_CIRCLE_END:
        case SID_CONNECTOR_LINE_CIRCLES:
        case SID_CONNECTOR_CURVE:
        case SID_CONNECTOR_CURVE_ARROW_START:
        case SID_CONNECTOR_CURVE_ARROW_END:
        case SID_CONNECTOR_CURVE_ARROWS:
        case SID_CONNECTOR_CURVE_CIRCLE_START:
        case SID_CONNECTOR_CURVE_CIRCLE_END:
        case SID_CONNECTOR_CURVE_CIRCLES:
        case SID_CONNECTOR_LINES:
        case SID_CONNECTOR_LINES_ARROW_START:
        case SID_CONNECTOR_LINES_ARROW_END:
        case SID_CONNECTOR_LINES_ARROWS:
        case SID_CONNECTOR_LINES_CIRCLE_START:
        case SID_CONNECTOR_LINES_CIRCLE_END:
        case SID_CONNECTOR_LINES_CIRCLES:
        {
            nMappedSId = SID_DRAWTBX_CONNECTORS;
        }
	}
	return( nMappedSId );
}

/*************************************************************************
|*
|* Fuellt das SlotArray, um das aktuelle Mapping des ToolboxSlots zu
|* bekommen
|*
\************************************************************************/

void DrawViewShell::MapSlot( sal_uInt16 nSId )
{
	sal_uInt16 nMappedSId = GetIdBySubId( nSId );

	if( nMappedSId > 0 )
	{
		sal_uInt16 nID = GetArrayId( nMappedSId ) + 1;
		mpSlotArray[ nID ] = nSId;
	}
}

/*************************************************************************
|*
|* Ermoeglicht ueber das SlotArray ein ImageMapping
|*
\************************************************************************/

void DrawViewShell::UpdateToolboxImages( SfxItemSet &rSet, sal_Bool bPermanent )
{
	if( !bPermanent )
	{
		sal_uInt16 nId = GetArrayId( SID_ZOOM_TOOLBOX ) + 1;
		rSet.Put( TbxImageItem( SID_ZOOM_TOOLBOX, mpSlotArray[nId] ) );

		nId = GetArrayId( SID_DRAWTBX_INSERT ) + 1;
		rSet.Put( TbxImageItem( SID_DRAWTBX_INSERT, mpSlotArray[nId] ) );

		nId = GetArrayId( SID_POSITION ) + 1;
		rSet.Put( TbxImageItem( SID_POSITION, mpSlotArray[nId] ) );

		nId = GetArrayId( SID_OBJECT_ALIGN ) + 1;
		rSet.Put( TbxImageItem( SID_OBJECT_ALIGN, mpSlotArray[nId] ) );
	}
	else
	{
		for( sal_uInt16 nId = 0; nId < SLOTARRAY_COUNT; nId += 2 )
		{
			rSet.Put( TbxImageItem( mpSlotArray[nId], mpSlotArray[nId+1] ) );
		}
	}
}

/*************************************************************************
|*
|* Gibt den gemappten Slot zurueck
|*
\************************************************************************/

sal_uInt16 DrawViewShell::GetMappedSlot( sal_uInt16 nSId )
{
	sal_uInt16 nSlot = 0;
	sal_uInt16 nId = GetArrayId( nSId );
	if( nId != USHRT_MAX )
		nSlot = mpSlotArray[ nId+1 ];

	// Wenn der Slot noch auf sich selbst gemapped ist, muss 0 zurueck-
	// gegeben werden, da sonst der Slot immer wieder selbst executet
	// wird. Im Array ist der Slot selbst initial vorhanden, damit das
	// Image richtig angezeigt wird.
	if( nSId == nSlot )
		return( 0 );

	return( nSlot );
}

/*************************************************************************
|*
|* Gibt die Nummer des HauptSlots im SlotArray zurueck
|*
\************************************************************************/

sal_uInt16 DrawViewShell::GetArrayId( sal_uInt16 nSId )
{
	for( sal_uInt16 i = 0; i < SLOTARRAY_COUNT; i += 2 )
	{
		if( mpSlotArray[ i ] == nSId )
			return( i );
	}
	DBG_ERROR( "Slot im Array nicht gefunden!" );
	return( USHRT_MAX );
}


/*************************************************************************
|*
|* IMap-Dlg updaten
|*
\************************************************************************/

void DrawViewShell::UpdateIMapDlg( SdrObject* pObj )
{
	if( ( pObj->ISA( SdrGrafObj ) || pObj->ISA( SdrOle2Obj ) ) && !mpDrawView->IsTextEdit() &&
		 GetViewFrame()->HasChildWindow( SvxIMapDlgChildWindow::GetChildWindowId() ) )
	{
		Graphic 	aGraphic;
		ImageMap*	pIMap = NULL;
		TargetList*	pTargetList = NULL;
		SdIMapInfo* pIMapInfo = GetDoc()->GetIMapInfo( pObj );

		// get graphic from shape
		SdrGrafObj* pGrafObj = dynamic_cast< SdrGrafObj* >( pObj );
		if( pGrafObj )
			aGraphic = pGrafObj->GetGraphic();

		if ( pIMapInfo )
		{
			pIMap = (ImageMap*) &pIMapInfo->GetImageMap();
			pTargetList = new TargetList;
			GetViewFrame()->GetTargetList( *pTargetList );
		}

		SvxIMapDlgChildWindow::UpdateIMapDlg( aGraphic, pIMap, pTargetList, pObj );

		// TargetListe kann von uns wieder geloescht werden
		if ( pTargetList )
		{
			String* pEntry = pTargetList->First();
			while( pEntry )
			{
				delete pEntry;
				pEntry = pTargetList->Next();
			}

			delete pTargetList;
		}
	}
}

// -----------------------------------------------------------------------------

IMPL_LINK( DrawViewShell, NameObjectHdl, AbstractSvxNameDialog*, pDialog )
{
    String aName;

    if( pDialog )
        pDialog->GetName( aName );

    return( ( !aName.Len() || ( GetDoc() && !GetDoc()->GetObj( aName ) ) ) ? 1 : 0 );
}

} // end of namespace sd