xref: /AOO41X/main/sw/source/core/doc/tblrwcl.cxx (revision dec99bbd1eb6ae693d6ee672c1a69e3a32d917e7)

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/



// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#include <com/sun/star/text/HoriOrientation.hpp>
#include <com/sun/star/chart2/XChartDocument.hpp>
#include <hintids.hxx>

#define _ZFORLIST_DECLARE_TABLE
#include <editeng/brshitem.hxx>
#include <editeng/lrspitem.hxx>
#include <editeng/protitem.hxx>
#include <editeng/boxitem.hxx>
#include <tools/fract.hxx>
#include <fmtfsize.hxx>
#include <fmtornt.hxx>
#include <doc.hxx>
#include <cntfrm.hxx>
#include <tabfrm.hxx>
#include <frmtool.hxx>
#include <pam.hxx>
#include <swtable.hxx>
#include <ndtxt.hxx>
#include <tblsel.hxx>
#include <fldbas.hxx>
#include <swundo.hxx>
#include <rowfrm.hxx>
#include <ddefld.hxx>
#include <hints.hxx>
#include <UndoTable.hxx>
#include <cellatr.hxx>
#include <mvsave.hxx>
#include <swtblfmt.hxx>
#include <swddetbl.hxx>
#include <poolfmt.hxx>
#include <tblrwcl.hxx>
#include <unochart.hxx>
#include <boost/shared_ptr.hpp>
#include <switerator.hxx>

using namespace com::sun::star;
using namespace com::sun::star::uno;


#define COLFUZZY 20
#define ROWFUZZY 10

using namespace ::com::sun::star;

#ifndef DBG_UTIL
#define CHECK_TABLE(t)
#else
#ifdef DEBUG
#define CHECK_TABLE(t) (t).CheckConsistency();
#else
#define CHECK_TABLE(t)
#endif
#endif

typedef SwTableLine* SwTableLinePtr;
SV_DECL_PTRARR_SORT( SwSortTableLines, SwTableLinePtr, 16, 16 )
SV_IMPL_PTRARR_SORT( SwSortTableLines, SwTableLinePtr );

SV_IMPL_PTRARR( _SwShareBoxFmts, SwShareBoxFmt* )

// fuers setzen der Frame-Formate an den Boxen reicht es, das aktuelle
// im Array zu suchen. Ist es vorhanden, so gebe das neue zurueck
struct _CpyTabFrm
{
	union {
		SwTableBoxFmt *pFrmFmt;		// fuer CopyCol
		SwTwips nSize;				// fuer DelCol
	} Value;
	SwTableBoxFmt *pNewFrmFmt;

	_CpyTabFrm( SwTableBoxFmt* pAktFrmFmt ) : pNewFrmFmt( 0 )
	{	Value.pFrmFmt = pAktFrmFmt;	}

	_CpyTabFrm& operator=( const _CpyTabFrm& );

	sal_Bool operator==( const _CpyTabFrm& rCpyTabFrm )
		{ return  (sal_uLong)Value.nSize == (sal_uLong)rCpyTabFrm.Value.nSize; }
	sal_Bool operator<( const _CpyTabFrm& rCpyTabFrm )
		{ return  (sal_uLong)Value.nSize < (sal_uLong)rCpyTabFrm.Value.nSize; }
};

struct CR_SetBoxWidth
{
	SwSelBoxes aBoxes;
	SwSortTableLines aLines;
	SvUShorts aLinesWidth;
	SwShareBoxFmts aShareFmts;
	SwTableNode* pTblNd;
	SwUndoTblNdsChg* pUndo;
	SwTwips nDiff, nSide, nMaxSize, nLowerDiff;
    TblChgMode nMode;
	sal_uInt16 nTblWidth, nRemainWidth, nBoxWidth;
	sal_Bool bBigger, bLeft, bSplittBox, bAnyBoxFnd;

	CR_SetBoxWidth( sal_uInt16 eType, SwTwips nDif, SwTwips nSid, SwTwips nTblW,
					SwTwips nMax, SwTableNode* pTNd )
		: pTblNd( pTNd ),
        nDiff( nDif ), nSide( nSid ), nMaxSize( nMax ), nLowerDiff( 0 ),
		nTblWidth( (sal_uInt16)nTblW ), nRemainWidth( 0 ), nBoxWidth( 0 ),
		bSplittBox( sal_False ), bAnyBoxFnd( sal_False )
	{
		bLeft = nsTblChgWidthHeightType::WH_COL_LEFT == ( eType & 0xff ) ||
				nsTblChgWidthHeightType::WH_CELL_LEFT == ( eType & 0xff );
		bBigger = 0 != (eType & nsTblChgWidthHeightType::WH_FLAG_BIGGER );
		nMode = pTblNd->GetTable().GetTblChgMode();
	}
	CR_SetBoxWidth( const CR_SetBoxWidth& rCpy )
		: pTblNd( rCpy.pTblNd ),
		pUndo( rCpy.pUndo ),
        nDiff( rCpy.nDiff ), nSide( rCpy.nSide ),
		nMaxSize( rCpy.nMaxSize ), nLowerDiff( 0 ),
        nMode( rCpy.nMode ), nTblWidth( rCpy.nTblWidth ),
        nRemainWidth( rCpy.nRemainWidth ), nBoxWidth( rCpy.nBoxWidth ),
		bBigger( rCpy.bBigger ), bLeft( rCpy.bLeft ),
		bSplittBox( rCpy.bSplittBox ), bAnyBoxFnd( rCpy.bAnyBoxFnd )
	{
		aLines.Insert( &rCpy.aLines );
		aLinesWidth.Insert( &rCpy.aLinesWidth, 0 );
	}

    SwUndoTblNdsChg* CreateUndo( SwUndoId eUndoType )
	{
        return pUndo = new SwUndoTblNdsChg( eUndoType, aBoxes, *pTblNd );
	}

	void LoopClear()
	{
		nLowerDiff = 0; nRemainWidth = 0;
	}

	void AddBoxWidth( const SwTableBox& rBox, sal_uInt16 nWidth )
	{
		SwTableLinePtr p = (SwTableLine*)rBox.GetUpper();
		sal_uInt16 nFndPos;
		if( aLines.Insert( p, nFndPos ))
			aLinesWidth.Insert( nWidth, nFndPos );
		else
			aLinesWidth[ nFndPos ] = aLinesWidth[ nFndPos ] + nWidth;
	}

	sal_uInt16 GetBoxWidth( const SwTableLine& rLn ) const
	{
		SwTableLinePtr p = (SwTableLine*)&rLn;
		sal_uInt16 nFndPos;
		if( aLines.Seek_Entry( p, &nFndPos ) )
			nFndPos = aLinesWidth[ nFndPos ];
		else
			nFndPos = 0;
		return nFndPos;
	}
};

sal_Bool lcl_SetSelBoxWidth( SwTableLine* pLine, CR_SetBoxWidth& rParam,
						 SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_SetOtherBoxWidth( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_InsSelBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_InsOtherBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_DelSelBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_DelOtherBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck );

typedef sal_Bool (*FN_lcl_SetBoxWidth)(SwTableLine*, CR_SetBoxWidth&, SwTwips, sal_Bool );

#if defined(DBG_UTIL) || defined( JP_DEBUG )

void _CheckBoxWidth( const SwTableLine& rLine, SwTwips nSize );

#define CHECKBOXWIDTH 											\
	{ 															\
		SwTwips nSize = GetFrmFmt()->GetFrmSize().GetWidth(); 	\
		for( sal_uInt16 nTmp = 0; nTmp < aLines.Count(); ++nTmp )	\
			::_CheckBoxWidth( *aLines[ nTmp ], nSize );			\
	}

#define CHECKTABLELAYOUT                                            \
    {                                                               \
        for ( sal_uInt16 i = 0; i < GetTabLines().Count(); ++i )        \
        {                                                           \
            SwFrmFmt* pFmt = GetTabLines()[i]->GetFrmFmt();  \
            SwIterator<SwRowFrm,SwFmt> aIter( *pFmt );              \
            for (SwRowFrm* pFrm=aIter.First(); pFrm; pFrm=aIter.Next())\
            {                                                       \
                if ( pFrm->GetTabLine() == GetTabLines()[i] )       \
                    {                                               \
                        ASSERT( pFrm->GetUpper()->IsTabFrm(),       \
                                "Table layout does not match table structure" )       \
                    }                                               \
            }                                                       \
        }                                                           \
    }

#else

#define CHECKBOXWIDTH
#define CHECKTABLELAYOUT

#endif


struct CR_SetLineHeight
{
	SwSelBoxes aBoxes;
	SwShareBoxFmts aShareFmts;
	SwTableNode* pTblNd;
	SwUndoTblNdsChg* pUndo;
	SwTwips nMaxSpace, nMaxHeight;
	TblChgMode nMode;
    sal_uInt16 nLines;
	sal_Bool bBigger, bTop, bSplittBox, bAnyBoxFnd;

	CR_SetLineHeight( sal_uInt16 eType, SwTableNode* pTNd )
		: pTblNd( pTNd ), pUndo( 0 ),
        nMaxSpace( 0 ), nMaxHeight( 0 ), nLines( 0 ),
		bSplittBox( sal_False ), bAnyBoxFnd( sal_False )
	{
		bTop = nsTblChgWidthHeightType::WH_ROW_TOP == ( eType & 0xff ) || nsTblChgWidthHeightType::WH_CELL_TOP == ( eType & 0xff );
		bBigger = 0 != (eType & nsTblChgWidthHeightType::WH_FLAG_BIGGER );
		if( eType & nsTblChgWidthHeightType::WH_FLAG_INSDEL )
			bBigger = !bBigger;
        nMode = pTblNd->GetTable().GetTblChgMode();
	}
	CR_SetLineHeight( const CR_SetLineHeight& rCpy )
		: pTblNd( rCpy.pTblNd ), pUndo( rCpy.pUndo ),
        nMaxSpace( rCpy.nMaxSpace ), nMaxHeight( rCpy.nMaxHeight ),
		nMode( rCpy.nMode ), nLines( rCpy.nLines ),
        bBigger( rCpy.bBigger ), bTop( rCpy.bTop ),
		bSplittBox( rCpy.bSplittBox ), bAnyBoxFnd( rCpy.bAnyBoxFnd )
	{}

    SwUndoTblNdsChg* CreateUndo( SwUndoId nUndoType )
	{
		return pUndo = new SwUndoTblNdsChg( nUndoType, aBoxes, *pTblNd );
	}
};

sal_Bool lcl_SetSelLineHeight( SwTableLine* pLine, CR_SetLineHeight& rParam,
						 SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_SetOtherLineHeight( SwTableLine* pLine, CR_SetLineHeight& rParam,
								SwTwips nDist, sal_Bool bCheck );
sal_Bool lcl_InsDelSelLine( SwTableLine* pLine, CR_SetLineHeight& rParam,
								SwTwips nDist, sal_Bool bCheck );

typedef sal_Bool (*FN_lcl_SetLineHeight)(SwTableLine*, CR_SetLineHeight&, SwTwips, sal_Bool );

_CpyTabFrm& _CpyTabFrm::operator=( const _CpyTabFrm& rCpyTabFrm )
{
	pNewFrmFmt = rCpyTabFrm.pNewFrmFmt;
	Value = rCpyTabFrm.Value;
	return *this;
}

SV_DECL_VARARR_SORT( _CpyTabFrms, _CpyTabFrm, 0, 50 )
SV_IMPL_VARARR_SORT( _CpyTabFrms, _CpyTabFrm )

void lcl_DelCpyTabFrmFmts( _CpyTabFrm& rArr );

// ---------------------------------------------------------------

struct _CpyPara
{
    boost::shared_ptr< std::vector< std::vector< sal_uLong > > > pWidths;
	SwDoc* pDoc;
	SwTableNode* pTblNd;
	_CpyTabFrms& rTabFrmArr;
	SwTableLine* pInsLine;
	SwTableBox* pInsBox;
	sal_uLong nOldSize, nNewSize;			// zum Korrigieren der Size-Attribute
    sal_uLong nMinLeft, nMaxRight;
	sal_uInt16 nCpyCnt, nInsPos;
    sal_uInt16 nLnIdx, nBoxIdx;
	sal_uInt8 nDelBorderFlag;
	sal_Bool bCpyCntnt;

	_CpyPara( SwTableNode* pNd, sal_uInt16 nCopies, _CpyTabFrms& rFrmArr,
			  sal_Bool bCopyContent = sal_True )
		: pDoc( pNd->GetDoc() ), pTblNd( pNd ), rTabFrmArr(rFrmArr),
		pInsLine(0), pInsBox(0), nOldSize(0), nNewSize(0),
        nMinLeft(ULONG_MAX), nMaxRight(0),
        nCpyCnt(nCopies), nInsPos(0),
        nLnIdx(0), nBoxIdx(0),
        nDelBorderFlag(0), bCpyCntnt( bCopyContent )
		{}
	_CpyPara( const _CpyPara& rPara, SwTableLine* pLine )
		: pWidths( rPara.pWidths ), pDoc(rPara.pDoc), pTblNd(rPara.pTblNd),
		rTabFrmArr(rPara.rTabFrmArr), pInsLine(pLine), pInsBox(rPara.pInsBox),
        nOldSize(0), nNewSize(rPara.nNewSize), nMinLeft( rPara.nMinLeft ),
        nMaxRight( rPara.nMaxRight ), nCpyCnt(rPara.nCpyCnt), nInsPos(0),
        nLnIdx( rPara.nLnIdx), nBoxIdx( rPara.nBoxIdx ),
		nDelBorderFlag( rPara.nDelBorderFlag ), bCpyCntnt( rPara.bCpyCntnt )
		{}
	_CpyPara( const _CpyPara& rPara, SwTableBox* pBox )
		: pWidths( rPara.pWidths ), pDoc(rPara.pDoc), pTblNd(rPara.pTblNd),
		rTabFrmArr(rPara.rTabFrmArr), pInsLine(rPara.pInsLine), pInsBox(pBox),
        nOldSize(rPara.nOldSize), nNewSize(rPara.nNewSize),
        nMinLeft( rPara.nMinLeft ), nMaxRight( rPara.nMaxRight ),
        nCpyCnt(rPara.nCpyCnt), nInsPos(0), nLnIdx(rPara.nLnIdx), nBoxIdx(rPara.nBoxIdx),
		nDelBorderFlag( rPara.nDelBorderFlag ), bCpyCntnt( rPara.bCpyCntnt )
		{}
	void SetBoxWidth( SwTableBox* pBox );
};


sal_Bool lcl_CopyCol( const _FndBox*& rpFndBox, void* pPara )
{
	_CpyPara* pCpyPara = (_CpyPara*)pPara;

	// suche das FrmFmt im Array aller Frame-Formate
	SwTableBox* pBox = (SwTableBox*)rpFndBox->GetBox();
	_CpyTabFrm aFindFrm( (SwTableBoxFmt*)pBox->GetFrmFmt() );

	sal_uInt16 nFndPos;
	if( pCpyPara->nCpyCnt )
	{
		if( !pCpyPara->rTabFrmArr.Seek_Entry( aFindFrm, &nFndPos ))
		{
			// fuer das verschachtelte Kopieren sicher auch das neue Format
			// als alt.
			SwTableBoxFmt* pNewFmt = (SwTableBoxFmt*)pBox->ClaimFrmFmt();

			// suche die selektierten Boxen in der Line:
			_FndLine* pCmpLine = NULL;
			SwFmtFrmSize aFrmSz( pNewFmt->GetFrmSize() );

			bool bDiffCount = false;
			if( pBox->GetTabLines().Count() )
			{
				pCmpLine = rpFndBox->GetLines()[ 0 ];
				if ( pCmpLine->GetBoxes().Count() != pCmpLine->GetLine()->GetTabBoxes().Count() )
					bDiffCount = true;
			}

			if( bDiffCount )
			{
				// die erste Line sollte reichen
				_FndBoxes& rFndBoxes = pCmpLine->GetBoxes();
				long nSz = 0;
				for( sal_uInt16 n = rFndBoxes.Count(); n; )
					nSz += rFndBoxes[ --n ]->GetBox()->GetFrmFmt()->GetFrmSize().GetWidth();
				aFrmSz.SetWidth( aFrmSz.GetWidth() -
											nSz / ( pCpyPara->nCpyCnt + 1 ) );
                pNewFmt->SetFmtAttr( aFrmSz );
				aFrmSz.SetWidth( nSz / ( pCpyPara->nCpyCnt + 1 ) );

				// fuer die neue Box ein neues Format mit der Groesse anlegen!
				aFindFrm.pNewFrmFmt = (SwTableBoxFmt*)pNewFmt->GetDoc()->
											MakeTableLineFmt();
				*aFindFrm.pNewFrmFmt = *pNewFmt;
                aFindFrm.pNewFrmFmt->SetFmtAttr( aFrmSz );
			}
			else
			{
				aFrmSz.SetWidth( aFrmSz.GetWidth() / ( pCpyPara->nCpyCnt + 1 ) );
                pNewFmt->SetFmtAttr( aFrmSz );

				aFindFrm.pNewFrmFmt = pNewFmt;
				pCpyPara->rTabFrmArr.Insert( aFindFrm );
				aFindFrm.Value.pFrmFmt = pNewFmt;
				pCpyPara->rTabFrmArr.Insert( aFindFrm );
			}
		}
		else
		{
			aFindFrm = pCpyPara->rTabFrmArr[ nFndPos ];
//			aFindFrm.pNewFrmFmt->Add( pBox );
			pBox->ChgFrmFmt( (SwTableBoxFmt*)aFindFrm.pNewFrmFmt );
		}
	}
	else
	{
		if( pCpyPara->nDelBorderFlag &&
			pCpyPara->rTabFrmArr.Seek_Entry( aFindFrm, &nFndPos ))
			aFindFrm = pCpyPara->rTabFrmArr[ nFndPos ];
		else
			aFindFrm.pNewFrmFmt = (SwTableBoxFmt*)pBox->GetFrmFmt();
	}

	if( rpFndBox->GetLines().Count() )
	{
		pBox = new SwTableBox( aFindFrm.pNewFrmFmt,
					rpFndBox->GetLines().Count(), pCpyPara->pInsLine );
		pCpyPara->pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pBox, pCpyPara->nInsPos++);
		_CpyPara aPara( *pCpyPara, pBox );
		aPara.nDelBorderFlag &= 7;

		((_FndBox*)rpFndBox)->GetLines().ForEach( &lcl_CopyRow, &aPara );
	}
	else
	{
		::_InsTblBox( pCpyPara->pDoc, pCpyPara->pTblNd, pCpyPara->pInsLine,
					aFindFrm.pNewFrmFmt, pBox, pCpyPara->nInsPos++ );

		const _FndBoxes& rFndBxs = rpFndBox->GetUpper()->GetBoxes();
		if( 8 > pCpyPara->nDelBorderFlag
				? pCpyPara->nDelBorderFlag
				: rpFndBox == rFndBxs[ rFndBxs.Count() - 1 ] )
		{
			const SvxBoxItem& rBoxItem = pBox->GetFrmFmt()->GetBox();
			if( 8 > pCpyPara->nDelBorderFlag
					? rBoxItem.GetTop()
					: rBoxItem.GetRight() )
			{
				aFindFrm.Value.pFrmFmt = (SwTableBoxFmt*)pBox->GetFrmFmt();

				SvxBoxItem aNew( rBoxItem );
				if( 8 > pCpyPara->nDelBorderFlag )
					aNew.SetLine( 0, BOX_LINE_TOP );
				else
					aNew.SetLine( 0, BOX_LINE_RIGHT );

				if( 1 == pCpyPara->nDelBorderFlag ||
					8 == pCpyPara->nDelBorderFlag )
				{
					// es wird dahinter kopiert, bei allen Boxen die
					// TopBorderLine loeschen
					pBox = pCpyPara->pInsLine->GetTabBoxes()[
											pCpyPara->nInsPos - 1 ];
				}

				aFindFrm.pNewFrmFmt = (SwTableBoxFmt*)pBox->GetFrmFmt();

				// ansonsten wird davor kopiert und die erste Line behaelt
				// die TopLine und an der originalen wird sie entfernt
                pBox->ClaimFrmFmt()->SetFmtAttr( aNew );

				if( !pCpyPara->nCpyCnt )
					pCpyPara->rTabFrmArr.Insert( aFindFrm );
			}
		}
	}
	return sal_True;
}

sal_Bool lcl_CopyRow( const _FndLine*& rpFndLine, void* pPara )
{
	_CpyPara* pCpyPara = (_CpyPara*)pPara;
	SwTableLine* pNewLine = new SwTableLine(
							(SwTableLineFmt*)rpFndLine->GetLine()->GetFrmFmt(),
						rpFndLine->GetBoxes().Count(), pCpyPara->pInsBox );
	if( pCpyPara->pInsBox )
	{
		pCpyPara->pInsBox->GetTabLines().C40_INSERT( SwTableLine, pNewLine, pCpyPara->nInsPos++ );
	}
	else
	{
		pCpyPara->pTblNd->GetTable().GetTabLines().C40_INSERT( SwTableLine, pNewLine,
												pCpyPara->nInsPos++ );
	}

	_CpyPara aPara( *pCpyPara, pNewLine );
	((_FndLine*)rpFndLine)->GetBoxes().ForEach( &lcl_CopyCol, &aPara );

	pCpyPara->nDelBorderFlag &= 0xf8;
	return sal_True;
}

//-----------------------------------------------------------

void lcl_InsCol( _FndLine* pFndLn, _CpyPara& rCpyPara, sal_uInt16 nCpyCnt,
				sal_Bool bBehind )
{
	// Bug 29124: nicht nur in den Grundlines kopieren. Wenns geht, so weit
	//				runter wie moeglich.
	_FndBox* pFBox;
	if( 1 == pFndLn->GetBoxes().Count() &&
		!( pFBox = pFndLn->GetBoxes()[ 0 ] )->GetBox()->GetSttNd() )
	{
		// eine Box mit mehreren Lines, also in diese Lines einfuegen
		for( sal_uInt16 n = 0; n < pFBox->GetLines().Count(); ++n )
			lcl_InsCol( pFBox->GetLines()[ n ], rCpyPara, nCpyCnt, bBehind );
	}
	else
	{
		rCpyPara.pInsLine = pFndLn->GetLine();
		SwTableBox* pBox = pFndLn->GetBoxes()[ bBehind ?
					pFndLn->GetBoxes().Count()-1 : 0 ]->GetBox();
		rCpyPara.nInsPos = pFndLn->GetLine()->GetTabBoxes().C40_GETPOS( SwTableBox, pBox );
        if( bBehind )
			++rCpyPara.nInsPos;

		for( sal_uInt16 n = 0; n < nCpyCnt; ++n )
		{
			if( n + 1 == nCpyCnt && bBehind )
				rCpyPara.nDelBorderFlag = 9;
			else
				rCpyPara.nDelBorderFlag = 8;
			pFndLn->GetBoxes().ForEach( &lcl_CopyCol, &rCpyPara );
		}
	}
}

SwRowFrm* GetRowFrm( SwTableLine& rLine )
{
    SwIterator<SwRowFrm,SwFmt> aIter( *rLine.GetFrmFmt() );
    for( SwRowFrm* pFrm = aIter.First(); pFrm; pFrm = aIter.Next() )
        if( pFrm->GetTabLine() == &rLine )
            return pFrm;
    return 0;
}


sal_Bool SwTable::InsertCol( SwDoc* pDoc, const SwSelBoxes& rBoxes, sal_uInt16 nCnt, sal_Bool bBehind )
{
    ASSERT( rBoxes.Count() && nCnt, "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	sal_Bool bRes = sal_True;
    if( IsNewModel() )
        bRes = NewInsertCol( pDoc, rBoxes, nCnt, bBehind );
	else
	{
		// suche alle Boxen / Lines
		_FndBox aFndBox( 0, 0 );
		{
			_FndPara aPara( rBoxes, &aFndBox );
			GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
		}
		if( !aFndBox.GetLines().Count() )
			return sal_False;

		SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

		//Lines fuer das Layout-Update herausuchen.
		aFndBox.SetTableLines( *this );
		aFndBox.DelFrms( *this );

		// TL_CHART2: nothing to be done since chart2 currently does not want to
		// get notified about new rows/cols.

		_CpyTabFrms aTabFrmArr;
		_CpyPara aCpyPara( pTblNd, nCnt, aTabFrmArr );

		for( sal_uInt16 n = 0; n < aFndBox.GetLines().Count(); ++n )
			lcl_InsCol( aFndBox.GetLines()[ n ], aCpyPara, nCnt, bBehind );

		// dann raeume die Struktur dieser Line noch mal auf, generell alle
		GCLines();

		//Layout updaten
		aFndBox.MakeFrms( *this );

		CHECKBOXWIDTH
		CHECKTABLELAYOUT
		bRes = sal_True;
	}

	SwChartDataProvider *pPCD = pDoc->GetChartDataProvider();
	if (pPCD && nCnt)
		pPCD->AddRowCols( *this, rBoxes, nCnt, bBehind );
    pDoc->UpdateCharts( GetFrmFmt()->GetName() );

	return bRes;
}

sal_Bool SwTable::_InsertRow( SwDoc* pDoc, const SwSelBoxes& rBoxes,
						sal_uInt16 nCnt, sal_Bool bBehind )
{
	ASSERT( pDoc && rBoxes.Count() && nCnt, "keine gueltige Box-Liste" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( rBoxes, &aFndBox );
		GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	_FndBox* pFndBox = &aFndBox;
	{
		_FndLine* pFndLine;
		while( 1 == pFndBox->GetLines().Count() &&
				1 == ( pFndLine = pFndBox->GetLines()[ 0 ])->GetBoxes().Count() )
		{
			// nicht zu weit runter, eine Line mit Boxen muss nachbleiben!!
			_FndBox* pTmpBox = pFndLine->GetBoxes()[ 0 ];
			if( pTmpBox->GetLines().Count() )
				pFndBox = pTmpBox;
			else
				break;
		}
	}

	//Lines fuer das Layout-Update herausuchen.
	const sal_Bool bLayout = !IsNewModel() &&
        0 != SwIterator<SwTabFrm,SwFmt>::FirstElement( *GetFrmFmt() );

    if ( bLayout )
	{
		aFndBox.SetTableLines( *this );
		if( pFndBox != &aFndBox )
			aFndBox.DelFrms( *this );
		// TL_CHART2: nothing to be done since chart2 currently does not want to
		// get notified about new rows/cols.
	}

	_CpyTabFrms aTabFrmArr;
	_CpyPara aCpyPara( pTblNd, 0, aTabFrmArr );

	SwTableLine* pLine = pFndBox->GetLines()[ bBehind ?
					pFndBox->GetLines().Count()-1 : 0 ]->GetLine();
	if( &aFndBox == pFndBox )
		aCpyPara.nInsPos = GetTabLines().C40_GETPOS( SwTableLine, pLine );
	else
	{
		aCpyPara.pInsBox = pFndBox->GetBox();
		aCpyPara.nInsPos = pFndBox->GetBox()->GetTabLines().C40_GETPOS( SwTableLine, pLine );
	}

    if( bBehind )
	{
		++aCpyPara.nInsPos;
		aCpyPara.nDelBorderFlag = 1;
	}
	else
		aCpyPara.nDelBorderFlag = 2;

	for( sal_uInt16 nCpyCnt = 0; nCpyCnt < nCnt; ++nCpyCnt )
	{
		if( bBehind )
			aCpyPara.nDelBorderFlag = 1;
		pFndBox->GetLines().ForEach( &lcl_CopyRow, &aCpyPara );
	}

	// dann raeume die Struktur dieser Line noch mal auf, generell alle
	if( !pDoc->IsInReading() )
		GCLines();

	//Layout updaten
	if ( bLayout )
	{
		if( pFndBox != &aFndBox )
			aFndBox.MakeFrms( *this );
		else
			aFndBox.MakeNewFrms( *this, nCnt, bBehind );
	}

	CHECKBOXWIDTH
    CHECKTABLELAYOUT

	SwChartDataProvider *pPCD = pDoc->GetChartDataProvider();
	if (pPCD && nCnt)
		pPCD->AddRowCols( *this, rBoxes, nCnt, bBehind );
    pDoc->UpdateCharts( GetFrmFmt()->GetName() );

	return sal_True;
}

sal_Bool _FndBoxAppendRowLine( const SwTableLine*& rpLine, void* pPara );

sal_Bool _FndBoxAppendRowBox( const SwTableBox*& rpBox, void* pPara )
{
	_FndPara* pFndPara = (_FndPara*)pPara;
	_FndBox* pFndBox = new _FndBox( (SwTableBox*)rpBox, pFndPara->pFndLine );
	if( rpBox->GetTabLines().Count() )
	{
		_FndPara aPara( *pFndPara, pFndBox );
		pFndBox->GetBox()->GetTabLines().ForEach( &_FndBoxAppendRowLine, &aPara );
		if( !pFndBox->GetLines().Count() )
			delete pFndBox;
	}
	else
		pFndPara->pFndLine->GetBoxes().C40_INSERT( _FndBox, pFndBox,
						pFndPara->pFndLine->GetBoxes().Count() );
	return sal_True;
}

sal_Bool _FndBoxAppendRowLine( const SwTableLine*& rpLine, void* pPara )
{
	_FndPara* pFndPara = (_FndPara*)pPara;
	_FndLine* pFndLine = new _FndLine( (SwTableLine*)rpLine, pFndPara->pFndBox );
	_FndPara aPara( *pFndPara, pFndLine );
	pFndLine->GetLine()->GetTabBoxes().ForEach( &_FndBoxAppendRowBox, &aPara );
	if( pFndLine->GetBoxes().Count() )
	{
		pFndPara->pFndBox->GetLines().C40_INSERT( _FndLine, pFndLine,
				pFndPara->pFndBox->GetLines().Count() );
	}
	else
		delete pFndLine;
	return sal_True;
}


sal_Bool SwTable::AppendRow( SwDoc* pDoc, sal_uInt16 nCnt )
{
	SwTableNode* pTblNd = (SwTableNode*)aSortCntBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		const SwTableLine* pLLine = GetTabLines()[ GetTabLines().Count()-1 ];

		const SwSelBoxes* pBxs = 0;		// Dummy !!!
		_FndPara aPara( *pBxs, &aFndBox );

		_FndBoxAppendRowLine( pLLine, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	//Lines fuer das Layout-Update herausuchen.
	bool bLayout = 0 != SwIterator<SwTabFrm,SwFmt>::FirstElement( *GetFrmFmt() );
	if( bLayout )
	{
		aFndBox.SetTableLines( *this );
		// TL_CHART2: nothing to be done since chart2 currently does not want to
		// get notified about new rows/cols.
	}

	_CpyTabFrms aTabFrmArr;
	_CpyPara aCpyPara( pTblNd, 0, aTabFrmArr );
	aCpyPara.nInsPos = GetTabLines().Count();
	aCpyPara.nDelBorderFlag = 1;

	for( sal_uInt16 nCpyCnt = 0; nCpyCnt < nCnt; ++nCpyCnt )
	{
		aCpyPara.nDelBorderFlag = 1;
		aFndBox.GetLines().ForEach( &lcl_CopyRow, &aCpyPara );
	}

	// dann raeume die Struktur dieser Line noch mal auf, generell alle
	if( !pDoc->IsInReading() )
		GCLines();

	//Layout updaten
	if ( bLayout )
	{
		aFndBox.MakeNewFrms( *this, nCnt, sal_True );
	}
	// TL_CHART2: need to inform chart of probably changed cell names
    pDoc->UpdateCharts( GetFrmFmt()->GetName() );

	CHECKBOXWIDTH
    CHECKTABLELAYOUT

	return sal_True;
}


void lcl_LastBoxSetWidth( SwTableBoxes &rBoxes, const long nOffset,
							sal_Bool bFirst, SwShareBoxFmts& rShareFmts );

void lcl_LastBoxSetWidthLine( SwTableLines &rLines, const long nOffset,
								sal_Bool bFirst, SwShareBoxFmts& rShareFmts )
{
	for ( sal_uInt16 i = 0; i < rLines.Count(); ++i )
		::lcl_LastBoxSetWidth( rLines[i]->GetTabBoxes(), nOffset, bFirst,
								rShareFmts );
}

void lcl_LastBoxSetWidth( SwTableBoxes &rBoxes, const long nOffset,
							sal_Bool bFirst, SwShareBoxFmts& rShareFmts )
{
	SwTableBox& rBox = *rBoxes[ bFirst ? 0 : rBoxes.Count() - 1 ];
	if( !rBox.GetSttNd() )
		::lcl_LastBoxSetWidthLine( rBox.GetTabLines(), nOffset,
									bFirst, rShareFmts );

	//Die Box anpassen
	SwFrmFmt *pBoxFmt = rBox.GetFrmFmt();
	SwFmtFrmSize aNew( pBoxFmt->GetFrmSize() );
	aNew.SetWidth( aNew.GetWidth() + nOffset );
	SwFrmFmt *pFmt = rShareFmts.GetFormat( *pBoxFmt, aNew );
	if( pFmt )
		rBox.ChgFrmFmt( (SwTableBoxFmt*)pFmt );
	else
	{
		pFmt = rBox.ClaimFrmFmt();

		pFmt->LockModify();
        pFmt->SetFmtAttr( aNew );
		pFmt->UnlockModify();

		rShareFmts.AddFormat( *pBoxFmt, *pFmt );
	}
}

void _DeleteBox( SwTable& rTbl, SwTableBox* pBox, SwUndo* pUndo,
				sal_Bool bCalcNewSize, const sal_Bool bCorrBorder,
				SwShareBoxFmts* pShareFmts )
{
	do {
		SwTwips nBoxSz = bCalcNewSize ?
				pBox->GetFrmFmt()->GetFrmSize().GetWidth() : 0;
		SwTableLine* pLine = pBox->GetUpper();
		SwTableBoxes& rTblBoxes = pLine->GetTabBoxes();
		sal_uInt16 nDelPos = rTblBoxes.C40_GETPOS( SwTableBox, pBox );
		SwTableBox* pUpperBox = pBox->GetUpper()->GetUpper();

		// Sonderbehandlung fuer Umrandung:
		if( bCorrBorder && 1 < rTblBoxes.Count() )
		{
			sal_Bool bChgd = sal_False;
			const SvxBoxItem& rBoxItem = pBox->GetFrmFmt()->GetBox();

			if( rBoxItem.GetLeft() || rBoxItem.GetRight() )
			{
				//JP 02.04.97:  1.Teil fuer Bug 36271
				// zuerst die linken/rechten Kanten
				if( nDelPos + 1 < rTblBoxes.Count() )
				{
					SwTableBox* pNxtBox = rTblBoxes[ nDelPos + 1 ];
					const SvxBoxItem& rNxtBoxItem = pNxtBox->GetFrmFmt()->GetBox();

					SwTableBox* pPrvBox = nDelPos ? rTblBoxes[ nDelPos - 1 ] : 0;

					if( pNxtBox->GetSttNd() && !rNxtBoxItem.GetLeft() &&
						( !pPrvBox || !pPrvBox->GetFrmFmt()->GetBox().GetRight()) )
					{
						SvxBoxItem aTmp( rNxtBoxItem );
						aTmp.SetLine( rBoxItem.GetLeft() ? rBoxItem.GetLeft()
														 : rBoxItem.GetRight(),
															BOX_LINE_LEFT );
						if( pShareFmts )
                            pShareFmts->SetAttr( *pNxtBox, aTmp );
						else
                            pNxtBox->ClaimFrmFmt()->SetFmtAttr( aTmp );
						bChgd = sal_True;
					}
				}
				if( !bChgd && nDelPos )
				{
					SwTableBox* pPrvBox = rTblBoxes[ nDelPos - 1 ];
					const SvxBoxItem& rPrvBoxItem = pPrvBox->GetFrmFmt()->GetBox();

					SwTableBox* pNxtBox = nDelPos + 1 < rTblBoxes.Count()
											? rTblBoxes[ nDelPos + 1 ] : 0;

					if( pPrvBox->GetSttNd() && !rPrvBoxItem.GetRight() &&
						( !pNxtBox || !pNxtBox->GetFrmFmt()->GetBox().GetLeft()) )
					{
						SvxBoxItem aTmp( rPrvBoxItem );
						aTmp.SetLine( rBoxItem.GetLeft() ? rBoxItem.GetLeft()
														 : rBoxItem.GetRight(),
															BOX_LINE_RIGHT );
						if( pShareFmts )
                            pShareFmts->SetAttr( *pPrvBox, aTmp );
						else
                            pPrvBox->ClaimFrmFmt()->SetFmtAttr( aTmp );
					}
				}
			}

		}

		// erst die Box, dann die Nodes loeschen!!
		SwStartNode* pSttNd = (SwStartNode*)pBox->GetSttNd();
		if( pShareFmts )
			pShareFmts->RemoveFormat( *rTblBoxes[ nDelPos ]->GetFrmFmt() );
		rTblBoxes.DeleteAndDestroy( nDelPos );

		if( pSttNd )
		{
			// ist das UndoObject zum speichern der Section vorbereitet?
			if( pUndo && pUndo->IsDelBox() )
				((SwUndoTblNdsChg*)pUndo)->SaveSection( pSttNd );
			else
				pSttNd->GetDoc()->DeleteSection( pSttNd );
		}

		// auch die Zeile noch loeschen ??
		if( rTblBoxes.Count() )
		{
			// dann passe noch die Frame-SSize an
			sal_Bool bLastBox = nDelPos == rTblBoxes.Count();
			if( bLastBox )
				--nDelPos;
			pBox = rTblBoxes[nDelPos];
			if( bCalcNewSize )
			{
				SwFmtFrmSize aNew( pBox->GetFrmFmt()->GetFrmSize() );
				aNew.SetWidth( aNew.GetWidth() + nBoxSz );
				if( pShareFmts )
					pShareFmts->SetSize( *pBox, aNew );
				else
                    pBox->ClaimFrmFmt()->SetFmtAttr( aNew );

				if( !pBox->GetSttNd() )
				{
					// dann muss es auch rekursiv in allen Zeilen, in allen
					// Zellen erfolgen!
					SwShareBoxFmts aShareFmts;
					::lcl_LastBoxSetWidthLine( pBox->GetTabLines(), nBoxSz,
												!bLastBox,
												pShareFmts ? *pShareFmts
														   : aShareFmts	);
				}
			}
			break;		// nichts mehr loeschen
		}
		// loesche die Line aus Tabelle/Box
		if( !pUpperBox )
		{
			// dann loesche auch noch die Line aus der Tabelle
			nDelPos = rTbl.GetTabLines().C40_GETPOS( SwTableLine, pLine );
			if( pShareFmts )
				pShareFmts->RemoveFormat( *rTbl.GetTabLines()[ nDelPos ]->GetFrmFmt() );
			rTbl.GetTabLines().DeleteAndDestroy( nDelPos );
			break;  	// mehr kann nicht geloescht werden
		}

		// dann loesche auch noch die Line
		pBox = pUpperBox;
		nDelPos = pBox->GetTabLines().C40_GETPOS( SwTableLine, pLine );
		if( pShareFmts )
			pShareFmts->RemoveFormat( *pBox->GetTabLines()[ nDelPos ]->GetFrmFmt() );
		pBox->GetTabLines().DeleteAndDestroy( nDelPos );
	} while( !pBox->GetTabLines().Count() );
}

SwTableBox* lcl_FndNxtPrvDelBox( const SwTableLines& rTblLns,
								SwTwips nBoxStt, SwTwips nBoxWidth,
								sal_uInt16 nLinePos, sal_Bool bNxt,
								SwSelBoxes* pAllDelBoxes, sal_uInt16* pCurPos )
{
	SwTableBox* pFndBox = 0;
	do {
		if( bNxt )
			++nLinePos;
		else
			--nLinePos;
		SwTableLine* pLine = rTblLns[ nLinePos ];
        SwTwips nFndBoxWidth = 0;
        SwTwips nFndWidth = nBoxStt + nBoxWidth;
		sal_uInt16 nBoxCnt = pLine->GetTabBoxes().Count();

        pFndBox = pLine->GetTabBoxes()[ 0 ];
		for( sal_uInt16 n = 0; 0 < nFndWidth && n < nBoxCnt; ++n )
		{
			pFndBox = pLine->GetTabBoxes()[ n ];
			nFndWidth -= (nFndBoxWidth = pFndBox->GetFrmFmt()->
										GetFrmSize().GetWidth());
		}

		// suche die erste ContentBox
		while( !pFndBox->GetSttNd() )
		{
			const SwTableLines& rLowLns = pFndBox->GetTabLines();
			if( bNxt )
				pFndBox = rLowLns[ 0 ]->GetTabBoxes()[ 0 ];
			else
				pFndBox = rLowLns[ rLowLns.Count() - 1 ]->GetTabBoxes()[ 0 ];
		}

		if( Abs( nFndWidth ) > COLFUZZY ||
			Abs( nBoxWidth - nFndBoxWidth ) > COLFUZZY )
			pFndBox = 0;
		else if( pAllDelBoxes )
		{
			// falls der Vorganger auch geloscht wird, ist nicht zu tun
			sal_uInt16 nFndPos;
			if( !pAllDelBoxes->Seek_Entry( pFndBox, &nFndPos ) )
				break;

			// sonst noch mal weitersuchen
			// Die Box muessen wir aber nicht nochmal abpruefen
			pFndBox = 0;
			if( nFndPos <= *pCurPos )
				--*pCurPos;
			pAllDelBoxes->Remove( nFndPos );
		}
	} while( bNxt ? ( nLinePos + 1 < rTblLns.Count() ) : nLinePos );
	return pFndBox;
}

void lcl_SaveUpperLowerBorder( SwTable& rTbl, const SwTableBox& rBox,
								SwShareBoxFmts& rShareFmts,
								SwSelBoxes* pAllDelBoxes = 0,
								sal_uInt16* pCurPos = 0 )
{
//JP 16.04.97:  2.Teil fuer Bug 36271
	sal_Bool bChgd = sal_False;
	const SwTableLine* pLine = rBox.GetUpper();
	const SwTableBoxes& rTblBoxes = pLine->GetTabBoxes();
	const SwTableBox* pUpperBox = &rBox;
	sal_uInt16 nDelPos = rTblBoxes.C40_GETPOS( SwTableBox, pUpperBox );
	pUpperBox = rBox.GetUpper()->GetUpper();
	const SvxBoxItem& rBoxItem = rBox.GetFrmFmt()->GetBox();

	// dann die unteren/oberen Kanten
	if( rBoxItem.GetTop() || rBoxItem.GetBottom() )
	{
		bChgd = sal_False;
		const SwTableLines* pTblLns;
		if( pUpperBox )
			pTblLns = &pUpperBox->GetTabLines();
		else
			pTblLns = &rTbl.GetTabLines();

		sal_uInt16 nLnPos = pTblLns->GetPos( pLine );

		// bestimme die Attr.Position der akt. zu loeschenden Box
		// und suche dann in der unteren / oberen Line die entspr.
		// Gegenstuecke
		SwTwips nBoxStt = 0;
		for( sal_uInt16 n = 0; n < nDelPos; ++n )
			nBoxStt += rTblBoxes[ n ]->GetFrmFmt()->GetFrmSize().GetWidth();
		SwTwips nBoxWidth = rBox.GetFrmFmt()->GetFrmSize().GetWidth();

		SwTableBox *pPrvBox = 0, *pNxtBox = 0;
		if( nLnPos )		// Vorgaenger?
			pPrvBox = ::lcl_FndNxtPrvDelBox( *pTblLns, nBoxStt, nBoxWidth,
								nLnPos, sal_False, pAllDelBoxes, pCurPos );

		if( nLnPos + 1 < pTblLns->Count() )		// Nachfolger?
			pNxtBox = ::lcl_FndNxtPrvDelBox( *pTblLns, nBoxStt, nBoxWidth,
								nLnPos, sal_True, pAllDelBoxes, pCurPos );

		if( pNxtBox && pNxtBox->GetSttNd() )
		{
			const SvxBoxItem& rNxtBoxItem = pNxtBox->GetFrmFmt()->GetBox();
			if( !rNxtBoxItem.GetTop() && ( !pPrvBox ||
				!pPrvBox->GetFrmFmt()->GetBox().GetBottom()) )
			{
				SvxBoxItem aTmp( rNxtBoxItem );
				aTmp.SetLine( rBoxItem.GetTop() ? rBoxItem.GetTop()
												: rBoxItem.GetBottom(),
												BOX_LINE_TOP );
                rShareFmts.SetAttr( *pNxtBox, aTmp );
				bChgd = sal_True;
			}
		}
		if( !bChgd && pPrvBox && pPrvBox->GetSttNd() )
		{
			const SvxBoxItem& rPrvBoxItem = pPrvBox->GetFrmFmt()->GetBox();
			if( !rPrvBoxItem.GetTop() && ( !pNxtBox ||
				!pNxtBox->GetFrmFmt()->GetBox().GetTop()) )
			{
				SvxBoxItem aTmp( rPrvBoxItem );
				aTmp.SetLine( rBoxItem.GetTop() ? rBoxItem.GetTop()
												: rBoxItem.GetBottom(),
												BOX_LINE_BOTTOM );
                rShareFmts.SetAttr( *pPrvBox, aTmp );
			}
		}

	}
}


sal_Bool SwTable::DeleteSel(
    SwDoc*     pDoc
    ,
    const SwSelBoxes& rBoxes,
    const SwSelBoxes* pMerged, SwUndo* pUndo,
	const sal_Bool bDelMakeFrms, const sal_Bool bCorrBorder )
{
    ASSERT( pDoc, "No doc?" );
    SwTableNode* pTblNd = 0;
    if( rBoxes.Count() )
    {
        pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
        if( !pTblNd )
            return sal_False;
    }

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	//Lines fuer das Layout-Update herausuchen.
	_FndBox aFndBox( 0, 0 );
	if ( bDelMakeFrms )
	{
        if( pMerged && pMerged->Count() )
            aFndBox.SetTableLines( *pMerged, *this );
        else if( rBoxes.Count() )
            aFndBox.SetTableLines( rBoxes, *this );
        aFndBox.DelFrms( *this );
	}

	SwShareBoxFmts aShareFmts;

	// erst die Umrandung umsetzen, dann loeschen
	if( bCorrBorder )
	{
		SwSelBoxes aBoxes;
		aBoxes.Insert( &rBoxes );
		for( sal_uInt16 n = 0; n < aBoxes.Count(); ++n )
			::lcl_SaveUpperLowerBorder( *this, *rBoxes[ n ], aShareFmts,
										&aBoxes, &n );
	}

    PrepareDelBoxes( rBoxes );

    SwChartDataProvider *pPCD = pDoc->GetChartDataProvider();
    //
    // delete boxes from last to first
    for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
    {
        sal_uInt16 nIdx = rBoxes.Count() - 1 - n;

        // first adapt the data-sequence for chart if necessary
        // (needed to move the implementation cursor properly to it's new
        // position which can't be done properly if the cell is already gone)
        if (pPCD && pTblNd)
            pPCD->DeleteBox( &pTblNd->GetTable(), *rBoxes[nIdx] );

        // ... then delete the boxes
        _DeleteBox( *this, rBoxes[nIdx], pUndo, sal_True, bCorrBorder, &aShareFmts );
    }

	// dann raeume die Struktur aller Lines auf
	GCLines();

	if( bDelMakeFrms && aFndBox.AreLinesToRestore( *this ) )
		aFndBox.MakeFrms( *this );

    // TL_CHART2: now inform chart that sth has changed
    pDoc->UpdateCharts( GetFrmFmt()->GetName() );

    CHECKTABLELAYOUT
    CHECK_TABLE( *this )

	return sal_True;
}


// ---------------------------------------------------------------

sal_Bool SwTable::OldSplitRow( SwDoc* pDoc, const SwSelBoxes& rBoxes, sal_uInt16 nCnt,
                        sal_Bool bSameHeight )
{
	ASSERT( pDoc && rBoxes.Count() && nCnt, "keine gueltigen Werte" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// TL_CHART2: splitting/merging of a number of cells or rows will usually make
	// the table to complex to be handled with chart.
    // Thus we tell the charts to use their own data provider and forget about this table
    pDoc->CreateChartInternalDataProviders( this );

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

    // If the rows should get the same (min) height, we first have
    // to store the old row heights before deleting the frames
    long* pRowHeights = 0;
    if ( bSameHeight )
    {
        pRowHeights = new long[ rBoxes.Count() ];
        for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
        {
            SwTableBox* pSelBox = *( rBoxes.GetData() + n );
            const SwRowFrm* pRow = GetRowFrm( *pSelBox->GetUpper() );
            ASSERT( pRow, "wo ist der Frm von der SwTableLine?" )
            SWRECTFN( pRow )
            pRowHeights[ n ] = (pRow->Frm().*fnRect->fnGetHeight)();
        }
    }

	//Lines fuer das Layout-Update herausuchen.
	_FndBox aFndBox( 0, 0 );
	aFndBox.SetTableLines( rBoxes, *this );
	aFndBox.DelFrms( *this );

    for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pSelBox = *( rBoxes.GetData() + n );
		ASSERT( pSelBox, "Box steht nicht in der Tabelle" );

		// dann fuege in die Box nCnt neue Zeilen ein
		SwTableLine* pInsLine = pSelBox->GetUpper();
		SwTableBoxFmt* pFrmFmt = (SwTableBoxFmt*)pSelBox->GetFrmFmt();

		// Hoehe der Line beachten, gegebenenfalls neu setzen
        SwFmtFrmSize aFSz( pInsLine->GetFrmFmt()->GetFrmSize() );
        if ( bSameHeight && ATT_VAR_SIZE == aFSz.GetHeightSizeType() )
            aFSz.SetHeightSizeType( ATT_MIN_SIZE );

        sal_Bool bChgLineSz = 0 != aFSz.GetHeight() || bSameHeight;
        if ( bChgLineSz )
            aFSz.SetHeight( ( bSameHeight ? pRowHeights[ n ] : aFSz.GetHeight() ) /
                             (nCnt + 1) );

		SwTableBox* pNewBox = new SwTableBox( pFrmFmt, nCnt, pInsLine );
		sal_uInt16 nBoxPos = pInsLine->GetTabBoxes().C40_GETPOS( SwTableBox, pSelBox );
		pInsLine->GetTabBoxes().Remove( nBoxPos );	// alte loeschen
		pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pNewBox, nBoxPos );

		// Hintergrund- / Rand Attribut loeschen
		SwTableBox* pLastBox = pSelBox; 		// zum verteilen der TextNodes !!
		// sollte Bereiche in der Box stehen, dann bleibt sie so bestehen
		// !! FALLS DAS GEAENDERT WIRD MUSS DAS UNDO ANGEPASST WERDEN !!!
		sal_Bool bMoveNodes = sal_True;
		{
			sal_uLong nSttNd = pLastBox->GetSttIdx() + 1,
					nEndNd = pLastBox->GetSttNd()->EndOfSectionIndex();
			while( nSttNd < nEndNd )
				if( !pDoc->GetNodes()[ nSttNd++ ]->IsTxtNode() )
				{
					bMoveNodes = sal_False;
					break;
				}
		}

		SwTableBoxFmt* pCpyBoxFrmFmt = (SwTableBoxFmt*)pSelBox->GetFrmFmt();
		sal_Bool bChkBorder = 0 != pCpyBoxFrmFmt->GetBox().GetTop();
		if( bChkBorder )
			pCpyBoxFrmFmt = (SwTableBoxFmt*)pSelBox->ClaimFrmFmt();

		for( sal_uInt16 i = 0; i <= nCnt; ++i )
		{
			// also erstmal eine neue Linie in der neuen Box
			SwTableLine* pNewLine = new SwTableLine(
					(SwTableLineFmt*)pInsLine->GetFrmFmt(), 1, pNewBox );
			if( bChgLineSz )
			{
                pNewLine->ClaimFrmFmt()->SetFmtAttr( aFSz );
			}

			pNewBox->GetTabLines().C40_INSERT( SwTableLine, pNewLine, i );
			// dann eine neue Box in der Line
			if( !i ) 		// haenge die originale Box ein
			{
				pSelBox->SetUpper( pNewLine );
				pNewLine->GetTabBoxes().C40_INSERT( SwTableBox, pSelBox, 0 );
			}
			else
			{
				::_InsTblBox( pDoc, pTblNd, pNewLine, pCpyBoxFrmFmt,
								pLastBox, 0 );

				if( bChkBorder )
				{
					pCpyBoxFrmFmt = (SwTableBoxFmt*)pNewLine->GetTabBoxes()[ 0 ]->ClaimFrmFmt();
					SvxBoxItem aTmp( pCpyBoxFrmFmt->GetBox() );
					aTmp.SetLine( 0, BOX_LINE_TOP );
                    pCpyBoxFrmFmt->SetFmtAttr( aTmp );
					bChkBorder = sal_False;
				}

				if( bMoveNodes )
				{
					const SwNode* pEndNd = pLastBox->GetSttNd()->EndOfSectionNode();
					if( pLastBox->GetSttIdx()+2 != pEndNd->GetIndex() )
					{
						// TextNodes verschieben
						SwNodeRange aRg( *pLastBox->GetSttNd(), +2, *pEndNd );
						pLastBox = pNewLine->GetTabBoxes()[0];	// neu setzen
						SwNodeIndex aInsPos( *pLastBox->GetSttNd(), 1 );
						pDoc->GetNodes()._MoveNodes(aRg, pDoc->GetNodes(), aInsPos, sal_False);
						pDoc->GetNodes().Delete( aInsPos, 1 ); // den leeren noch loeschen
					}
				}
			}
		}
		// in Boxen mit Lines darf es nur noch Size/Fillorder geben
		pFrmFmt = (SwTableBoxFmt*)pNewBox->ClaimFrmFmt();
        pFrmFmt->ResetFmtAttr( RES_LR_SPACE, RES_FRMATR_END - 1 );
        pFrmFmt->ResetFmtAttr( RES_BOXATR_BEGIN, RES_BOXATR_END - 1 );
	}

    delete[] pRowHeights;

	GCLines();

    aFndBox.MakeFrms( *this );

	CHECKBOXWIDTH
    CHECKTABLELAYOUT
    return sal_True;
}

sal_Bool SwTable::SplitCol( SwDoc* pDoc, const SwSelBoxes& rBoxes, sal_uInt16 nCnt )
{
	ASSERT( pDoc && rBoxes.Count() && nCnt, "keine gueltigen Werte" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// TL_CHART2: splitting/merging of a number of cells or rows will usually make
	// the table to complex to be handled with chart.
    // Thus we tell the charts to use their own data provider and forget about this table
    pDoc->CreateChartInternalDataProviders( this );

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen
    SwSelBoxes aSelBoxes;
    aSelBoxes.Insert(rBoxes.GetData(), rBoxes.Count());
    ExpandSelection( aSelBoxes );

	//Lines fuer das Layout-Update herausuchen.
	_FndBox aFndBox( 0, 0 );
	aFndBox.SetTableLines( aSelBoxes, *this );
	aFndBox.DelFrms( *this );

	_CpyTabFrms aFrmArr;
	SvPtrarr aLastBoxArr;
	sal_uInt16 nFndPos;
	for( sal_uInt16 n = 0; n < aSelBoxes.Count(); ++n )
	{
		SwTableBox* pSelBox = *( aSelBoxes.GetData() + n );
		ASSERT( pSelBox, "Box steht nicht in der Tabelle" );

        // We don't want to split small table cells into very very small cells
        if( pSelBox->GetFrmFmt()->GetFrmSize().GetWidth()/( nCnt + 1 ) < 10 )
            continue;

		// dann teile die Box nCnt in nCnt Boxen
		SwTableLine* pInsLine = pSelBox->GetUpper();
		sal_uInt16 nBoxPos = pInsLine->GetTabBoxes().C40_GETPOS( SwTableBox, pSelBox );

		// suche das FrmFmt im Array aller Frame-Formate
		SwTableBoxFmt* pLastBoxFmt;
		_CpyTabFrm aFindFrm( (SwTableBoxFmt*)pSelBox->GetFrmFmt() );
		if( !aFrmArr.Seek_Entry( aFindFrm, &nFndPos ))
		{
			// aender das FrmFmt
			aFindFrm.pNewFrmFmt = (SwTableBoxFmt*)pSelBox->ClaimFrmFmt();
			SwTwips nBoxSz = aFindFrm.pNewFrmFmt->GetFrmSize().GetWidth();
			SwTwips nNewBoxSz = nBoxSz / ( nCnt + 1 );
            aFindFrm.pNewFrmFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
														nNewBoxSz, 0 ) );
			aFrmArr.Insert( aFindFrm );

			pLastBoxFmt = aFindFrm.pNewFrmFmt;
			if( nBoxSz != ( nNewBoxSz * (nCnt + 1)))
			{
				// es bleibt ein Rest, also muss fuer die letzte Box ein
				// eigenes Format definiert werden
				pLastBoxFmt = new SwTableBoxFmt( *aFindFrm.pNewFrmFmt );
                pLastBoxFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE,
								nBoxSz - ( nNewBoxSz * nCnt ), 0 ) );
			}
			void* p = pLastBoxFmt;
			aLastBoxArr.Insert( p, nFndPos );
		}
		else
		{
			aFindFrm = aFrmArr[ nFndPos ];
			pSelBox->ChgFrmFmt( (SwTableBoxFmt*)aFindFrm.pNewFrmFmt );
			pLastBoxFmt = (SwTableBoxFmt*)aLastBoxArr[ nFndPos ];
		}

		// dann fuege mal an der Position die neuen Boxen ein
		for( sal_uInt16 i = 1; i < nCnt; ++i )
			::_InsTblBox( pDoc, pTblNd, pInsLine, aFindFrm.pNewFrmFmt,
						pSelBox, nBoxPos + i );	// dahinter einfuegen

		::_InsTblBox( pDoc, pTblNd, pInsLine, pLastBoxFmt,
					pSelBox, nBoxPos + nCnt );	// dahinter einfuegen

		// Sonderbehandlung fuer die Umrandung:
		const SvxBoxItem& aSelBoxItem = aFindFrm.pNewFrmFmt->GetBox();
		if( aSelBoxItem.GetRight() )
		{
			pInsLine->GetTabBoxes()[ nBoxPos + nCnt ]->ClaimFrmFmt();

			SvxBoxItem aTmp( aSelBoxItem );
			aTmp.SetLine( 0, BOX_LINE_RIGHT );
            aFindFrm.pNewFrmFmt->SetFmtAttr( aTmp );

			// und dann das Format aus dem "cache" entfernen
			for( sal_uInt16 i = aFrmArr.Count(); i; )
			{
				const _CpyTabFrm& rCTF = aFrmArr[ --i ];
				if( rCTF.pNewFrmFmt == aFindFrm.pNewFrmFmt ||
					rCTF.Value.pFrmFmt == aFindFrm.pNewFrmFmt )
				{
					aFrmArr.Remove( i );
					aLastBoxArr.Remove( i );
				}
			}
		}
	}

	//Layout updaten
	aFndBox.MakeFrms( *this );

	CHECKBOXWIDTH
    CHECKTABLELAYOUT
	return sal_True;
}

// ---------------------------------------------------------------

/*
	----------------------- >> MERGE << ------------------------
	 Algorithmus:
		ist in der _FndBox nur eine Line angegeben, nehme die Line
		und teste die Anzahl der Boxen
		- ist mehr als 1 Box angegeben, so wird auf Boxenebene zusammen-
			gefasst, d.H. die neue Box wird so Breit wie die alten.
			- Alle Lines die ueber/unter dem Bereich liegen werden in die
			Box als Line + Box mit Lines eingefuegt
			- Alle Lines die vor/hinter dem Bereich liegen werden in
			die Boxen Left/Right eingetragen

	----------------------- >> MERGE << ------------------------
*/

void lcl_CpyLines( sal_uInt16 nStt, sal_uInt16 nEnd,
								SwTableLines& rLines,
								SwTableBox* pInsBox,
								sal_uInt16 nPos = USHRT_MAX )
{
	for( sal_uInt16 n = nStt; n < nEnd; ++n )
		rLines[n]->SetUpper( pInsBox );
	if( USHRT_MAX == nPos )
		nPos = pInsBox->GetTabLines().Count();
	pInsBox->GetTabLines().Insert( &rLines, nPos, nStt, nEnd );
	rLines.Remove( nStt, nEnd - nStt );
}

void lcl_CpyBoxes( sal_uInt16 nStt, sal_uInt16 nEnd,
								SwTableBoxes& rBoxes,
								SwTableLine* pInsLine,
								sal_uInt16 nPos = USHRT_MAX )
{
	for( sal_uInt16 n = nStt; n < nEnd; ++n )
		rBoxes[n]->SetUpper( pInsLine );
	if( USHRT_MAX == nPos )
		nPos = pInsLine->GetTabBoxes().Count();
	pInsLine->GetTabBoxes().Insert( &rBoxes, nPos, nStt, nEnd );
	rBoxes.Remove( nStt, nEnd - nStt );
}

void lcl_CalcWidth( SwTableBox* pBox )
{
	// Annahme: jede Line in der Box ist gleich gross
	SwFrmFmt* pFmt = pBox->ClaimFrmFmt();
	ASSERT( pBox->GetTabLines().Count(), "Box hat keine Lines" );

	SwTableLine* pLine = pBox->GetTabLines()[0];
	ASSERT( pLine, "Box steht in keiner Line" );

	long nWidth = 0;
	for( sal_uInt16 n = 0; n < pLine->GetTabBoxes().Count(); ++n )
		nWidth += pLine->GetTabBoxes()[n]->GetFrmFmt()->GetFrmSize().GetWidth();

    pFmt->SetFmtAttr( SwFmtFrmSize( ATT_VAR_SIZE, nWidth, 0 ));

	// in Boxen mit Lines darf es nur noch Size/Fillorder geben
    pFmt->ResetFmtAttr( RES_LR_SPACE, RES_FRMATR_END - 1 );
    pFmt->ResetFmtAttr( RES_BOXATR_BEGIN, RES_BOXATR_END - 1 );
}



struct _InsULPara
{
	SwTableNode* pTblNd;
	SwTableLine* pInsLine;
	SwTableBox* pInsBox;
	sal_Bool bUL_LR : 1;		// Upper-Lower(sal_True) oder Left-Right(sal_False) ?
	sal_Bool bUL : 1;           // Upper-Left(sal_True) oder Lower-Right(sal_False) ?

	SwTableBox* pLeftBox;
	SwTableBox* pRightBox;
	SwTableBox* pMergeBox;

	_InsULPara( SwTableNode* pTNd, sal_Bool bUpperLower, sal_Bool bUpper,
				SwTableBox* pLeft, SwTableBox* pMerge, SwTableBox* pRight,
				SwTableLine* pLine=0, SwTableBox* pBox=0 )
		: pTblNd( pTNd ), pInsLine( pLine ), pInsBox( pBox ),
		pLeftBox( pLeft ), pRightBox( pRight ), pMergeBox( pMerge )
		{	bUL_LR = bUpperLower; bUL = bUpper;	}

	void SetLeft( SwTableBox* pBox=0 )
		{ bUL_LR = sal_False;	bUL = sal_True; if( pBox ) pInsBox = pBox; }
	void SetRight( SwTableBox* pBox=0 )
		{ bUL_LR = sal_False;	bUL = sal_False; if( pBox ) pInsBox = pBox; }
	void SetUpper( SwTableLine* pLine=0 )
		{ bUL_LR = sal_True;	bUL = sal_True;  if( pLine ) pInsLine = pLine; }
	void SetLower( SwTableLine* pLine=0 )
		{ bUL_LR = sal_True;	bUL = sal_False; if( pLine ) pInsLine = pLine; }
};


sal_Bool lcl_Merge_MoveBox( const _FndBox*& rpFndBox, void* pPara )
{
	_InsULPara* pULPara = (_InsULPara*)pPara;
	SwTableBoxes* pBoxes;

	sal_uInt16 nStt = 0, nEnd = rpFndBox->GetLines().Count();
	sal_uInt16 nInsPos = USHRT_MAX;
	if( !pULPara->bUL_LR )	// Left/Right
	{
		sal_uInt16 nPos;
		SwTableBox* pFndBox = (SwTableBox*)rpFndBox->GetBox();
		pBoxes = &pFndBox->GetUpper()->GetTabBoxes();
		if( pULPara->bUL )	// Left ?
		{
			// gibt es noch davor Boxen, dann move sie
			if( 0 != ( nPos = pBoxes->C40_GETPOS( SwTableBox, pFndBox )) )
				lcl_CpyBoxes( 0, nPos, *pBoxes, pULPara->pInsLine );
		}
		else				// Right
			// gibt es noch dahinter Boxen, dann move sie
			if( (nPos = pBoxes->C40_GETPOS( SwTableBox, pFndBox )) +1 < pBoxes->Count() )
			{
				nInsPos = pULPara->pInsLine->GetTabBoxes().Count();
				lcl_CpyBoxes( nPos+1, pBoxes->Count(),
									*pBoxes, pULPara->pInsLine );
			}
	}
	// Upper/Lower und gehts noch tiefer ??
	else if( rpFndBox->GetLines().Count() )
	{
		// suche nur die Line, ab der Verschoben werden muss
		nStt = pULPara->bUL ? 0 : rpFndBox->GetLines().Count()-1;
		nEnd = nStt+1;
	}

	pBoxes = &pULPara->pInsLine->GetTabBoxes();

	// geht es noch eine weitere Stufe runter?
	if( rpFndBox->GetBox()->GetTabLines().Count() )
	{
		SwTableBox* pBox = new SwTableBox(
				(SwTableBoxFmt*)rpFndBox->GetBox()->GetFrmFmt(), 0,	pULPara->pInsLine );
		_InsULPara aPara( *pULPara );
		aPara.pInsBox = pBox;
		((_FndBox*)rpFndBox)->GetLines().ForEach( nStt, nEnd,
												&lcl_Merge_MoveLine, &aPara );
		if( pBox->GetTabLines().Count() )
		{
			if( USHRT_MAX == nInsPos )
				nInsPos = pBoxes->Count();
			pBoxes->C40_INSERT( SwTableBox, pBox, nInsPos );
			lcl_CalcWidth( pBox );		// bereche die Breite der Box
		}
		else
			delete pBox;
	}
	return sal_True;
}

sal_Bool lcl_Merge_MoveLine( const _FndLine*& rpFndLine, void* pPara )
{
	_InsULPara* pULPara = (_InsULPara*)pPara;
	SwTableLines* pLines;

	sal_uInt16 nStt = 0, nEnd = rpFndLine->GetBoxes().Count();
	sal_uInt16 nInsPos = USHRT_MAX;
	if( pULPara->bUL_LR ) 	// UpperLower ?
	{
		sal_uInt16 nPos;
		SwTableLine* pFndLn = (SwTableLine*)rpFndLine->GetLine();
		pLines = pFndLn->GetUpper() ?
						&pFndLn->GetUpper()->GetTabLines() :
						&pULPara->pTblNd->GetTable().GetTabLines();

		SwTableBox* pLBx = rpFndLine->GetBoxes()[0]->GetBox();
		SwTableBox* pRBx = rpFndLine->GetBoxes()[
							rpFndLine->GetBoxes().Count()-1]->GetBox();
		sal_uInt16 nLeft = pFndLn->GetTabBoxes().C40_GETPOS( SwTableBox, pLBx );
		sal_uInt16 nRight = pFndLn->GetTabBoxes().C40_GETPOS( SwTableBox, pRBx );

//		if( ( nLeft && nRight+1 < pFndLn->GetTabBoxes().Count() ) ||
//			( !nLeft && nRight+1 >= pFndLn->GetTabBoxes().Count() ) )
		if( !nLeft || nRight == pFndLn->GetTabBoxes().Count() )
		{
			if( pULPara->bUL )	// Upper ?
			{
				// gibt es noch davor Zeilen, dann move sie
				if( 0 != ( nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) )
					lcl_CpyLines( 0, nPos, *pLines, pULPara->pInsBox );
			}
			else
				// gibt es noch dahinter Zeilen, dann move sie
				if( (nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) +1 < pLines->Count() )
				{
					nInsPos = pULPara->pInsBox->GetTabLines().Count();
					lcl_CpyLines( nPos+1, pLines->Count(), *pLines,
										pULPara->pInsBox );
				}
		}
		else if( nLeft )
		{
			// es gibt links noch weitere Boxen, also setze Left-
			// und Merge-Box in eine Box und Line, fuege davor/dahinter
			// eine Line mit Box ein, in die die oberen/unteren Lines
			// eingefuegt werden
			SwTableLine* pInsLine = pULPara->pLeftBox->GetUpper();
			SwTableBox* pLMBox = new SwTableBox(
				(SwTableBoxFmt*)pULPara->pLeftBox->GetFrmFmt(), 0, pInsLine );
			SwTableLine* pLMLn = new SwTableLine(
						(SwTableLineFmt*)pInsLine->GetFrmFmt(), 2, pLMBox );
            pLMLn->ClaimFrmFmt()->ResetFmtAttr( RES_FRM_SIZE );

			pLMBox->GetTabLines().C40_INSERT( SwTableLine, pLMLn, 0 );

			lcl_CpyBoxes( 0, 2, pInsLine->GetTabBoxes(), pLMLn );

			pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pLMBox, 0 );

			if( pULPara->bUL )	// Upper ?
			{
				// gibt es noch davor Zeilen, dann move sie
				if( 0 != ( nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) )
					lcl_CpyLines( 0, nPos, *pLines, pLMBox, 0 );
			}
			else
				// gibt es noch dahinter Zeilen, dann move sie
				if( (nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) +1 < pLines->Count() )
					lcl_CpyLines( nPos+1, pLines->Count(), *pLines,
										pLMBox );
			lcl_CalcWidth( pLMBox );		// bereche die Breite der Box
		}
		else if( nRight+1 < pFndLn->GetTabBoxes().Count() )
		{
			// es gibt rechts noch weitere Boxen, also setze Right-
			// und Merge-Box in eine Box und Line, fuege davor/dahinter
			// eine Line mit Box ein, in die die oberen/unteren Lines
			// eingefuegt werden
			SwTableLine* pInsLine = pULPara->pRightBox->GetUpper();
			SwTableBox* pRMBox;
			if( pULPara->pLeftBox->GetUpper() == pInsLine )
			{
				pRMBox = new SwTableBox(
					(SwTableBoxFmt*)pULPara->pRightBox->GetFrmFmt(), 0, pInsLine );
				SwTableLine* pRMLn = new SwTableLine(
					(SwTableLineFmt*)pInsLine->GetFrmFmt(), 2, pRMBox );
                pRMLn->ClaimFrmFmt()->ResetFmtAttr( RES_FRM_SIZE );
				pRMBox->GetTabLines().C40_INSERT( SwTableLine, pRMLn, 0 );

				lcl_CpyBoxes( 1, 3, pInsLine->GetTabBoxes(), pRMLn );

				pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pRMBox, 0 );
			}
			else
			{
				// Left und Merge wurden schon zusammengefuegt, also move
				// Right auch mit in die Line

				pInsLine = pULPara->pLeftBox->GetUpper();
				sal_uInt16 nMvPos = pULPara->pRightBox->GetUpper()->GetTabBoxes().
									C40_GETPOS( SwTableBox, pULPara->pRightBox );
				lcl_CpyBoxes( nMvPos, nMvPos+1,
							pULPara->pRightBox->GetUpper()->GetTabBoxes(),
							pInsLine );
				pRMBox = pInsLine->GetUpper();

				// sind schon Lines vorhanden, dann muessen diese in eine
				// neue Line und Box
				nMvPos = pRMBox->GetTabLines().C40_GETPOS( SwTableLine, pInsLine );
				if( pULPara->bUL ? nMvPos
								: nMvPos+1 < pRMBox->GetTabLines().Count() )
				{
					// alle Lines zu einer neuen Line und Box zusammenfassen
					SwTableLine* pNewLn = new SwTableLine(
						(SwTableLineFmt*)pInsLine->GetFrmFmt(), 1, pRMBox );
                    pNewLn->ClaimFrmFmt()->ResetFmtAttr( RES_FRM_SIZE );
					pRMBox->GetTabLines().C40_INSERT( SwTableLine, pNewLn,
							pULPara->bUL ? nMvPos : nMvPos+1 );
					pRMBox = new SwTableBox( (SwTableBoxFmt*)pRMBox->GetFrmFmt(), 0, pNewLn );
					pNewLn->GetTabBoxes().C40_INSERT( SwTableBox, pRMBox, 0 );

					sal_uInt16 nPos1, nPos2;
					if( pULPara->bUL )
						nPos1 = 0,
						nPos2 = nMvPos;
					else
						nPos1 = nMvPos+2,
						nPos2 = pNewLn->GetUpper()->GetTabLines().Count();

					lcl_CpyLines( nPos1, nPos2,
								pNewLn->GetUpper()->GetTabLines(), pRMBox );
					lcl_CalcWidth( pRMBox );		// bereche die Breite der Box

					pRMBox = new SwTableBox( (SwTableBoxFmt*)pRMBox->GetFrmFmt(), 0, pNewLn );
					pNewLn->GetTabBoxes().C40_INSERT( SwTableBox, pRMBox,
									pNewLn->GetTabBoxes().Count() );
				}
			}
			if( pULPara->bUL )	// Upper ?
			{
				// gibt es noch davor Zeilen, dann move sie
				if( 0 != ( nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) )
					lcl_CpyLines( 0, nPos, *pLines, pRMBox, 0 );
			}
			else
				// gibt es noch dahinter Zeilen, dann move sie
				if( (nPos = pLines->C40_GETPOS( SwTableLine, pFndLn )) +1 < pLines->Count() )
					lcl_CpyLines( nPos+1, pLines->Count(), *pLines,
										pRMBox );
			lcl_CalcWidth( pRMBox );		// bereche die Breite der Box
		}
		else {
			ASSERT( sal_False , "Was denn nun" );
        }
	}
	// Left/Right
	else
	{
		// suche nur die Line, ab der Verschoben werden muss
		nStt = pULPara->bUL ? 0 : rpFndLine->GetBoxes().Count()-1;
		nEnd = nStt+1;
	}
	pLines = &pULPara->pInsBox->GetTabLines();

	SwTableLine* pNewLine = new SwTableLine(
		(SwTableLineFmt*)rpFndLine->GetLine()->GetFrmFmt(), 0, pULPara->pInsBox );
	_InsULPara aPara( *pULPara );		// kopieren
	aPara.pInsLine = pNewLine;
	((_FndLine*)rpFndLine)->GetBoxes().ForEach( nStt, nEnd,
												&lcl_Merge_MoveBox, &aPara );
	if( pNewLine->GetTabBoxes().Count() )
	{
		if( USHRT_MAX == nInsPos )
			nInsPos = pLines->Count();
		pLines->C40_INSERT( SwTableLine, pNewLine, nInsPos );
	}
	else
		delete pNewLine;

	return sal_True;
}


sal_Bool SwTable::OldMerge( SwDoc* pDoc, const SwSelBoxes& rBoxes,
    					SwTableBox* pMergeBox, SwUndoTblMerge* pUndo )
{
    ASSERT( rBoxes.Count() && pMergeBox, "keine gueltigen Werte" );
	SwTableNode* pTblNd = (SwTableNode*)rBoxes[0]->GetSttNd()->FindTableNode();
	if( !pTblNd )
		return sal_False;

	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( rBoxes, &aFndBox );
		GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	// TL_CHART2: splitting/merging of a number of cells or rows will usually make
	// the table to complex to be handled with chart.
    // Thus we tell the charts to use their own data provider and forget about this table
    pDoc->CreateChartInternalDataProviders( this );

	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	if( pUndo )
		pUndo->SetSelBoxes( rBoxes );

	//Lines fuer das Layout-Update herausuchen.
	aFndBox.SetTableLines( *this );
	aFndBox.DelFrms( *this );

	_FndBox* pFndBox = &aFndBox;
	while( 1 == pFndBox->GetLines().Count() &&
			1 == pFndBox->GetLines()[0]->GetBoxes().Count() )
		pFndBox = pFndBox->GetLines()[0]->GetBoxes()[0];

	SwTableLine* pInsLine = new SwTableLine(
				(SwTableLineFmt*)pFndBox->GetLines()[0]->GetLine()->GetFrmFmt(), 0,
				!pFndBox->GetUpper() ? 0 : pFndBox->GetBox() );
    pInsLine->ClaimFrmFmt()->ResetFmtAttr( RES_FRM_SIZE );

	// trage die neue Line ein
	SwTableLines* pLines =  pFndBox->GetUpper() ?
				  &pFndBox->GetBox()->GetTabLines() :  &GetTabLines();

	SwTableLine* pNewLine = pFndBox->GetLines()[0]->GetLine();
	sal_uInt16 nInsPos = pLines->C40_GETPOS( SwTableLine, pNewLine );
	pLines->C40_INSERT( SwTableLine, pInsLine, nInsPos );

	SwTableBox* pLeftBox = new SwTableBox( (SwTableBoxFmt*)pMergeBox->GetFrmFmt(), 0, pInsLine );
	SwTableBox* pRightBox = new SwTableBox( (SwTableBoxFmt*)pMergeBox->GetFrmFmt(), 0, pInsLine );
	pMergeBox->SetUpper( pInsLine );
	pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pLeftBox, 0 );
	pLeftBox->ClaimFrmFmt();
	pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pMergeBox, 1 );
	pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pRightBox, 2 );
	pRightBox->ClaimFrmFmt();

	// in diese kommen alle Lines, die ueber dem selektierten Bereich stehen
	// Sie bilden also eine Upper/Lower Line
	_InsULPara aPara( pTblNd, sal_True, sal_True, pLeftBox, pMergeBox, pRightBox, pInsLine );

	// move die oben/unten ueberhaengenden Lines vom selektierten Bereich
	pFndBox->GetLines()[0]->GetBoxes().ForEach( &lcl_Merge_MoveBox,
												&aPara );
	aPara.SetLower( pInsLine );
	sal_uInt16 nEnd = pFndBox->GetLines().Count()-1;
	pFndBox->GetLines()[nEnd]->GetBoxes().ForEach( &lcl_Merge_MoveBox,
													&aPara );

	// move die links/rechts hereinreichenden Boxen vom selektierten Bereich
	aPara.SetLeft( pLeftBox );
	pFndBox->GetLines().ForEach( &lcl_Merge_MoveLine, &aPara );

	aPara.SetRight( pRightBox );
	pFndBox->GetLines().ForEach( &lcl_Merge_MoveLine, &aPara );

	if( !pLeftBox->GetTabLines().Count() )
		_DeleteBox( *this, pLeftBox, 0, sal_False, sal_False );
	else
	{
		lcl_CalcWidth( pLeftBox );		// bereche die Breite der Box
		if( pUndo && pLeftBox->GetSttNd() )
			pUndo->AddNewBox( pLeftBox->GetSttIdx() );
	}
	if( !pRightBox->GetTabLines().Count() )
		_DeleteBox( *this, pRightBox, 0, sal_False, sal_False );
	else
	{
		lcl_CalcWidth( pRightBox );		// bereche die Breite der Box
		if( pUndo && pRightBox->GetSttNd() )
			pUndo->AddNewBox( pRightBox->GetSttIdx() );
	}

	DeleteSel( pDoc, rBoxes, 0, 0, sal_False, sal_False );

	// dann raeume die Struktur dieser Line noch mal auf:
	// generell alle Aufraeumen
	GCLines();

	GetTabLines()[0]->GetTabBoxes().ForEach( &lcl_BoxSetHeadCondColl, 0 );

	aFndBox.MakeFrms( *this );

	CHECKBOXWIDTH
    CHECKTABLELAYOUT

	return sal_True;
}

// ---------------------------------------------------------------

void lcl_CheckRowSpan( SwTable &rTbl )
{
    sal_uInt16 nLineCount = rTbl.GetTabLines().Count();
    sal_uInt16 nMaxSpan = nLineCount;
    long nMinSpan = 1;
    while( nMaxSpan )
    {
        SwTableLine* pLine = rTbl.GetTabLines()[ nLineCount - nMaxSpan ];
        for( sal_uInt16 nBox = 0; nBox < pLine->GetTabBoxes().Count(); ++nBox )
        {
            SwTableBox* pBox = pLine->GetTabBoxes()[nBox];
            long nRowSpan = pBox->getRowSpan();
            if( nRowSpan > nMaxSpan )
                pBox->setRowSpan( nMaxSpan );
            else if( nRowSpan < nMinSpan )
                pBox->setRowSpan( nMinSpan > 0 ? nMaxSpan : nMinSpan );
        }
        --nMaxSpan;
        nMinSpan = -nMaxSpan;
    }
}

sal_uInt16 lcl_GetBoxOffset( const _FndBox& rBox )
{
	// suche die erste Box
	const _FndBox* pFirstBox = &rBox;
	while( pFirstBox->GetLines().Count() )
		pFirstBox = pFirstBox->GetLines()[ 0 ]->GetBoxes()[ 0 ];

	sal_uInt16 nRet = 0;
	// dann ueber die Lines nach oben die Position bestimmen
	const SwTableBox* pBox = pFirstBox->GetBox();
	do {
		const SwTableBoxes& rBoxes = pBox->GetUpper()->GetTabBoxes();
		const SwTableBox* pCmp;
		for( sal_uInt16 n = 0; pBox != ( pCmp = rBoxes[ n ] ); ++n )
			nRet = nRet + (sal_uInt16) pCmp->GetFrmFmt()->GetFrmSize().GetWidth();
		pBox = pBox->GetUpper()->GetUpper();
	} while( pBox );
	return nRet;
}

sal_uInt16 lcl_GetLineWidth( const _FndLine& rLine )
{
	sal_uInt16 nRet = 0;
	for( sal_uInt16 n = rLine.GetBoxes().Count(); n; )
		nRet = nRet + (sal_uInt16)rLine.GetBoxes()[ --n ]->GetBox()->GetFrmFmt()
						->GetFrmSize().GetWidth();
	return nRet;
}

void lcl_CalcNewWidths( const _FndLines& rFndLines, _CpyPara& rPara )
{
    rPara.pWidths.reset();
    sal_uInt16 nLineCount = rFndLines.Count();
    if( nLineCount )
    {
        rPara.pWidths = boost::shared_ptr< std::vector< std::vector< sal_uLong > > >
                        ( new std::vector< std::vector< sal_uLong > >( nLineCount ));
        // First we collect information about the left/right borders of all
        // selected cells
        for( sal_uInt16 nLine = 0; nLine < nLineCount; ++nLine )
        {
            std::vector< sal_uLong > &rWidth = (*rPara.pWidths.get())[ nLine ];
            const _FndLine *pFndLine = rFndLines[ nLine ];
            if( pFndLine && pFndLine->GetBoxes().Count() )
            {
                const SwTableLine *pLine = pFndLine->GetLine();
                if( pLine && pLine->GetTabBoxes().Count() )
                {
                    sal_uInt16 nBoxCount = pLine->GetTabBoxes().Count();
                    sal_uLong nPos = 0;
                    // The first selected box...
                    const SwTableBox *pSel = pFndLine->GetBoxes()[0]->GetBox();
                    sal_uInt16 nBox = 0;
                    // Sum up the width of all boxes before the first selected box
                    while( nBox < nBoxCount )
                    {
                        SwTableBox* pBox = pLine->GetTabBoxes()[nBox++];
                        if( pBox != pSel )
                            nPos += pBox->GetFrmFmt()->GetFrmSize().GetWidth();
                        else
                            break;
                    }
                    // nPos is now the left border of the first selceted box
                    if( rPara.nMinLeft > nPos )
                        rPara.nMinLeft = nPos;
                    nBoxCount = pFndLine->GetBoxes().Count();
                    rWidth = std::vector< sal_uLong >( nBoxCount+2 );
                    rWidth[ 0 ] = nPos;
                    // Add now the widths of all selected boxes and store
                    // the positions in the vector
                    for( nBox = 0; nBox < nBoxCount; )
                    {
                        nPos += pFndLine->GetBoxes()[nBox]
						    ->GetBox()->GetFrmFmt()->GetFrmSize().GetWidth();
                        rWidth[ ++nBox ] = nPos;
                    }
                    // nPos: The right border of the last selected box
                    if( rPara.nMaxRight < nPos )
                        rPara.nMaxRight = nPos;
                    if( nPos <= rWidth[ 0 ] )
                        rWidth.clear();
                }
            }
        }
    }
    // Second step: calculate the new widths for the copied cells
    sal_uLong nSelSize = rPara.nMaxRight - rPara.nMinLeft;
    if( nSelSize )
    {
        for( sal_uInt16 nLine = 0; nLine < nLineCount; ++nLine )
        {
            std::vector< sal_uLong > &rWidth = (*rPara.pWidths.get())[ nLine ];
            sal_uInt16 nCount = (sal_uInt16)rWidth.size();
            if( nCount > 2 )
            {
                rWidth[ nCount - 1 ] = rPara.nMaxRight;
                sal_uLong nLastPos = 0;
                for( sal_uInt16 nBox = 0; nBox < nCount; ++nBox )
                {
                    sal_uInt64 nNextPos = rWidth[ nBox ];
                    nNextPos -= rPara.nMinLeft;
                    nNextPos *= rPara.nNewSize;
                    nNextPos /= nSelSize;
                    rWidth[ nBox ] = (sal_uLong)(nNextPos - nLastPos);
                    nLastPos = (sal_uLong)nNextPos;
                }
            }
        }
    }
}

sal_Bool lcl_CopyBoxToDoc( const _FndBox*& rpFndBox, void* pPara )
{
	_CpyPara* pCpyPara = (_CpyPara*)pPara;

	// Calculation of new size
    sal_uLong nRealSize;
    sal_uLong nDummy1 = 0;
    sal_uLong nDummy2 = 0;
    if( pCpyPara->pTblNd->GetTable().IsNewModel() )
    {
        if( pCpyPara->nBoxIdx == 1 )
            nDummy1 = (*pCpyPara->pWidths.get())[pCpyPara->nLnIdx][0];
        nRealSize = (*pCpyPara->pWidths.get())[pCpyPara->nLnIdx][pCpyPara->nBoxIdx++];
        if( pCpyPara->nBoxIdx == (*pCpyPara->pWidths.get())[pCpyPara->nLnIdx].size()-1 )
            nDummy2 = (*pCpyPara->pWidths.get())[pCpyPara->nLnIdx][pCpyPara->nBoxIdx];
    }
    else
    {
        nRealSize = pCpyPara->nNewSize;
        nRealSize *= rpFndBox->GetBox()->GetFrmFmt()->GetFrmSize().GetWidth();
        nRealSize /= pCpyPara->nOldSize;
    }

    sal_uLong nSize;
    bool bDummy = nDummy1 > 0;
    if( bDummy )
        nSize = nDummy1;
    else
    {
        nSize = nRealSize;
        nRealSize = 0;
    }
    do
    {
        // suche das Frame-Format in der Liste aller Frame-Formate
        _CpyTabFrm aFindFrm( (SwTableBoxFmt*)rpFndBox->GetBox()->GetFrmFmt() );

        SwFmtFrmSize aFrmSz;
        sal_uInt16 nFndPos;
        if( !pCpyPara->rTabFrmArr.Seek_Entry( aFindFrm, &nFndPos ) ||
            ( aFrmSz = ( aFindFrm = pCpyPara->rTabFrmArr[ nFndPos ]).pNewFrmFmt->
                GetFrmSize()).GetWidth() != (SwTwips)nSize )
        {
            // es ist noch nicht vorhanden, also kopiere es
            aFindFrm.pNewFrmFmt = pCpyPara->pDoc->MakeTableBoxFmt();
            aFindFrm.pNewFrmFmt->CopyAttrs( *rpFndBox->GetBox()->GetFrmFmt() );
            if( !pCpyPara->bCpyCntnt )
                aFindFrm.pNewFrmFmt->ResetFmtAttr(  RES_BOXATR_FORMULA, RES_BOXATR_VALUE );
            aFrmSz.SetWidth( nSize );
            aFindFrm.pNewFrmFmt->SetFmtAttr( aFrmSz );
            pCpyPara->rTabFrmArr.Insert( aFindFrm );
        }

        SwTableBox* pBox;
        if( rpFndBox->GetLines().Count() )
        {
            pBox = new SwTableBox( aFindFrm.pNewFrmFmt,
                        rpFndBox->GetLines().Count(), pCpyPara->pInsLine );
            pCpyPara->pInsLine->GetTabBoxes().C40_INSERT( SwTableBox, pBox, pCpyPara->nInsPos++ );
            _CpyPara aPara( *pCpyPara, pBox );
            aPara.nNewSize = nSize;		// hole die Groesse
            ((_FndBox*)rpFndBox)->GetLines().ForEach( &lcl_CopyLineToDoc, &aPara );
        }
        else
        {
            // erzeuge eine leere Box
            pCpyPara->pDoc->GetNodes().InsBoxen( pCpyPara->pTblNd, pCpyPara->pInsLine,
                            aFindFrm.pNewFrmFmt,
                            (SwTxtFmtColl*)pCpyPara->pDoc->GetDfltTxtFmtColl(),
                            0, pCpyPara->nInsPos );
            pBox = pCpyPara->pInsLine->GetTabBoxes()[ pCpyPara->nInsPos ];
            if( bDummy )
                pBox->setDummyFlag( true );
            else if( pCpyPara->bCpyCntnt )
            {
                // dann kopiere mal den Inhalt in diese leere Box
                pBox->setRowSpan( rpFndBox->GetBox()->getRowSpan() );

                // der Inhalt kopiert wird, dann koennen auch Formeln&Values
                // kopiert werden.
                {
                    SfxItemSet aBoxAttrSet( pCpyPara->pDoc->GetAttrPool(),
                                            RES_BOXATR_FORMAT, RES_BOXATR_VALUE );
                    aBoxAttrSet.Put( rpFndBox->GetBox()->GetFrmFmt()->GetAttrSet() );
                    if( aBoxAttrSet.Count() )
                    {
                        const SfxPoolItem* pItem;
                        SvNumberFormatter* pN = pCpyPara->pDoc->GetNumberFormatter( sal_False );
                        if( pN && pN->HasMergeFmtTbl() && SFX_ITEM_SET == aBoxAttrSet.
                            GetItemState( RES_BOXATR_FORMAT, sal_False, &pItem ) )
                        {
                            sal_uLong nOldIdx = ((SwTblBoxNumFormat*)pItem)->GetValue();
                            sal_uLong nNewIdx = pN->GetMergeFmtIndex( nOldIdx );
                            if( nNewIdx != nOldIdx )
                                aBoxAttrSet.Put( SwTblBoxNumFormat( nNewIdx ));
                        }
                        pBox->ClaimFrmFmt()->SetFmtAttr( aBoxAttrSet );
                    }
                }
                SwDoc* pFromDoc = rpFndBox->GetBox()->GetFrmFmt()->GetDoc();
                SwNodeRange aCpyRg( *rpFndBox->GetBox()->GetSttNd(), 1,
                            *rpFndBox->GetBox()->GetSttNd()->EndOfSectionNode() );
                SwNodeIndex aInsIdx( *pBox->GetSttNd(), 1 );

                pFromDoc->CopyWithFlyInFly( aCpyRg, 0, aInsIdx, NULL, sal_False );
                // den initialen TextNode loeschen
                pCpyPara->pDoc->GetNodes().Delete( aInsIdx, 1 );
            }
            ++pCpyPara->nInsPos;
        }
        if( nRealSize )
        {
            bDummy = false;
            nSize = nRealSize;
            nRealSize = 0;
        }
        else
        {
            bDummy = true;
            nSize = nDummy2;
            nDummy2 = 0;
        }
    }
    while( nSize );
	return sal_True;
}

sal_Bool lcl_CopyLineToDoc( const _FndLine*& rpFndLine, void* pPara )
{
	_CpyPara* pCpyPara = (_CpyPara*)pPara;

	// suche das Format in der Liste aller Formate
	_CpyTabFrm aFindFrm( (SwTableBoxFmt*)rpFndLine->GetLine()->GetFrmFmt() );
	sal_uInt16 nFndPos;
	if( !pCpyPara->rTabFrmArr.Seek_Entry( aFindFrm, &nFndPos ))
	{
		// es ist noch nicht vorhanden, also kopiere es
		aFindFrm.pNewFrmFmt = (SwTableBoxFmt*)pCpyPara->pDoc->MakeTableLineFmt();
		aFindFrm.pNewFrmFmt->CopyAttrs( *rpFndLine->GetLine()->GetFrmFmt() );
		pCpyPara->rTabFrmArr.Insert( aFindFrm );
	}
	else
		aFindFrm = pCpyPara->rTabFrmArr[ nFndPos ];

	SwTableLine* pNewLine = new SwTableLine( (SwTableLineFmt*)aFindFrm.pNewFrmFmt,
						rpFndLine->GetBoxes().Count(), pCpyPara->pInsBox );
	if( pCpyPara->pInsBox )
	{
		pCpyPara->pInsBox->GetTabLines().C40_INSERT( SwTableLine, pNewLine, pCpyPara->nInsPos++ );
	}
	else
	{
		pCpyPara->pTblNd->GetTable().GetTabLines().C40_INSERT( SwTableLine, pNewLine,
							pCpyPara->nInsPos++ );
	}

	_CpyPara aPara( *pCpyPara, pNewLine );

	if( pCpyPara->pTblNd->GetTable().IsNewModel() )
    {
        aPara.nOldSize = 0; // will not be used
        aPara.nBoxIdx = 1;
    }
    else if( rpFndLine->GetBoxes().Count() ==
					rpFndLine->GetLine()->GetTabBoxes().Count() )
	{
		// hole die Size vom Parent
		const SwFrmFmt* pFmt;

		if( rpFndLine->GetLine()->GetUpper() )
			pFmt = rpFndLine->GetLine()->GetUpper()->GetFrmFmt();
		else
			pFmt = pCpyPara->pTblNd->GetTable().GetFrmFmt();
		aPara.nOldSize = pFmt->GetFrmSize().GetWidth();
	}
	else
		// errechne sie
		for( sal_uInt16 n = 0; n < rpFndLine->GetBoxes().Count(); ++n )
			aPara.nOldSize += rpFndLine->GetBoxes()[n]
						->GetBox()->GetFrmFmt()->GetFrmSize().GetWidth();

	((_FndLine*)rpFndLine)->GetBoxes().ForEach( &lcl_CopyBoxToDoc, &aPara );
    if( pCpyPara->pTblNd->GetTable().IsNewModel() )
        ++pCpyPara->nLnIdx;
	return sal_True;
}

sal_Bool SwTable::CopyHeadlineIntoTable( SwTableNode& rTblNd )
{
	// suche alle Boxen / Lines
	SwSelBoxes aSelBoxes;
	SwTableBox* pBox = GetTabSortBoxes()[ 0 ];
    pBox = GetTblBox( pBox->GetSttNd()->StartOfSectionNode()->GetIndex() + 1 );
	SelLineFromBox( pBox, aSelBoxes, sal_True );

	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( aSelBoxes, &aFndBox );
		((SwTableLines&)GetTabLines()).ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	{
		// Tabellen-Formeln in die relative Darstellung umwandeln
		SwTableFmlUpdate aMsgHnt( this );
		aMsgHnt.eFlags = TBL_RELBOXNAME;
		GetFrmFmt()->GetDoc()->UpdateTblFlds( &aMsgHnt );
	}

	_CpyTabFrms aCpyFmt;
	_CpyPara aPara( &rTblNd, 1, aCpyFmt, sal_True );
	aPara.nNewSize = aPara.nOldSize = rTblNd.GetTable().GetFrmFmt()->GetFrmSize().GetWidth();
	// dann kopiere mal
    if( IsNewModel() )
        lcl_CalcNewWidths( aFndBox.GetLines(), aPara );
	aFndBox.GetLines().ForEach( &lcl_CopyLineToDoc, &aPara );
    if( rTblNd.GetTable().IsNewModel() )
    {   // The copied line must not contain any row span attributes > 1
        SwTableLine* pLine = rTblNd.GetTable().GetTabLines()[0];
        sal_uInt16 nColCount = pLine->GetTabBoxes().Count();
        ASSERT( nColCount, "Empty Table Line" )
        for( sal_uInt16 nCurrCol = 0; nCurrCol < nColCount; ++nCurrCol )
        {
            SwTableBox* pTableBox = pLine->GetTabBoxes()[nCurrCol];
            ASSERT( pTableBox, "Missing Table Box" );
            pTableBox->setRowSpan( 1 );
        }
    }

	return sal_True;
}

sal_Bool SwTable::MakeCopy( SwDoc* pInsDoc, const SwPosition& rPos,
						const SwSelBoxes& rSelBoxes, sal_Bool bCpyNds,
						sal_Bool bCpyName ) const
{
	// suche alle Boxen / Lines
	_FndBox aFndBox( 0, 0 );
	{
		_FndPara aPara( rSelBoxes, &aFndBox );
		((SwTableLines&)GetTabLines()).ForEach( &_FndLineCopyCol, &aPara );
	}
	if( !aFndBox.GetLines().Count() )
		return sal_False;

	// erst die Poolvorlagen fuer die Tabelle kopieren, damit die dann
	// wirklich kopiert und damit die gueltigen Werte haben.
	SwDoc* pSrcDoc = GetFrmFmt()->GetDoc();
	if( pSrcDoc != pInsDoc )
	{
		pInsDoc->CopyTxtColl( *pSrcDoc->GetTxtCollFromPool( RES_POOLCOLL_TABLE ) );
		pInsDoc->CopyTxtColl( *pSrcDoc->GetTxtCollFromPool( RES_POOLCOLL_TABLE_HDLN ) );
	}

    SwTable* pNewTbl = (SwTable*)pInsDoc->InsertTable(
            SwInsertTableOptions( tabopts::HEADLINE_NO_BORDER, 1 ),
            rPos, 1, 1, GetFrmFmt()->GetHoriOrient().GetHoriOrient(),
            0, 0, sal_False, IsNewModel() );
	if( !pNewTbl )
		return sal_False;

	SwNodeIndex aIdx( rPos.nNode, -1 );
	SwTableNode* pTblNd = aIdx.GetNode().FindTableNode();
	aIdx++;
	ASSERT( pTblNd, "wo ist denn nun der TableNode?" );

    pTblNd->GetTable().SetRowsToRepeat( GetRowsToRepeat() );

	if( IS_TYPE( SwDDETable, this ))
	{
		// es wird eine DDE-Tabelle kopiert
		// ist im neuen Dokument ueberhaupt der FeldTyp vorhanden ?
		SwFieldType* pFldType = pInsDoc->InsertFldType(
									*((SwDDETable*)this)->GetDDEFldType() );
		ASSERT( pFldType, "unbekannter FieldType" );

		// tauschen am Node den Tabellen-Pointer aus
		pNewTbl = new SwDDETable( *pNewTbl,
								 (SwDDEFieldType*)pFldType );
		pTblNd->SetNewTable( pNewTbl, sal_False );
	}

	pNewTbl->GetFrmFmt()->CopyAttrs( *GetFrmFmt() );
	pNewTbl->SetTblChgMode( GetTblChgMode() );

	//Vernichten der Frms die bereits angelegt wurden.
	pTblNd->DelFrms();

	{
		// Tabellen-Formeln in die relative Darstellung umwandeln
		SwTableFmlUpdate aMsgHnt( this );
		aMsgHnt.eFlags = TBL_RELBOXNAME;
		pSrcDoc->UpdateTblFlds( &aMsgHnt );
	}

	SwTblNumFmtMerge aTNFM( *pSrcDoc, *pInsDoc );

	// Namen auch kopieren oder neuen eindeutigen erzeugen
	if( bCpyName )
		pNewTbl->GetFrmFmt()->SetName( GetFrmFmt()->GetName() );

	_CpyTabFrms aCpyFmt;
	_CpyPara aPara( pTblNd, 1, aCpyFmt, bCpyNds );
	aPara.nNewSize = aPara.nOldSize = GetFrmFmt()->GetFrmSize().GetWidth();

    if( IsNewModel() )
        lcl_CalcNewWidths( aFndBox.GetLines(), aPara );
	// dann kopiere mal
	aFndBox.GetLines().ForEach( &lcl_CopyLineToDoc, &aPara );

	// dann setze oben und unten noch die "richtigen" Raender:
	{
		_FndLine* pFndLn = aFndBox.GetLines()[ 0 ];
		SwTableLine* pLn = pFndLn->GetLine();
		const SwTableLine* pTmp = pLn;
		sal_uInt16 nLnPos = GetTabLines().GetPos( pTmp );
		if( USHRT_MAX != nLnPos && nLnPos )
		{
			// es gibt eine Line davor
			SwCollectTblLineBoxes aLnPara( sal_False, HEADLINE_BORDERCOPY );

			pLn = GetTabLines()[ nLnPos - 1 ];
			pLn->GetTabBoxes().ForEach( &lcl_Box_CollectBox, &aLnPara );

			if( aLnPara.Resize( lcl_GetBoxOffset( aFndBox ),
								lcl_GetLineWidth( *pFndLn )) )
			{
				aLnPara.SetValues( sal_True );
				pLn = pNewTbl->GetTabLines()[ 0 ];
				pLn->GetTabBoxes().ForEach( &lcl_BoxSetSplitBoxFmts, &aLnPara );
			}
		}

		pFndLn = aFndBox.GetLines()[ aFndBox.GetLines().Count() -1 ];
		pLn = pFndLn->GetLine();
		pTmp = pLn;
		nLnPos = GetTabLines().GetPos( pTmp );
		if( nLnPos < GetTabLines().Count() - 1 )
		{
			// es gibt eine Line dahinter
			SwCollectTblLineBoxes aLnPara( sal_True, HEADLINE_BORDERCOPY );

			pLn = GetTabLines()[ nLnPos + 1 ];
			pLn->GetTabBoxes().ForEach( &lcl_Box_CollectBox, &aLnPara );

			if( aLnPara.Resize( lcl_GetBoxOffset( aFndBox ),
								lcl_GetLineWidth( *pFndLn )) )
			{
				aLnPara.SetValues( sal_False );
				pLn = pNewTbl->GetTabLines()[ pNewTbl->GetTabLines().Count()-1 ];
				pLn->GetTabBoxes().ForEach( &lcl_BoxSetSplitBoxFmts, &aLnPara );
			}
		}
	}

	// die initiale Box muss noch geloescht werden
	_DeleteBox( *pNewTbl, pNewTbl->GetTabLines()[
				pNewTbl->GetTabLines().Count() - 1 ]->GetTabBoxes()[0],
				0, sal_False, sal_False );

    if( pNewTbl->IsNewModel() )
        lcl_CheckRowSpan( *pNewTbl );
	// Mal kurz aufraeumen:
	pNewTbl->GCLines();

	pTblNd->MakeFrms( &aIdx ); 	// erzeuge die Frames neu

    CHECKTABLELAYOUT

	return sal_True;
}



// ---------------------------------------------------------------

// suche ab dieser Line nach der naechsten Box mit Inhalt
SwTableBox* SwTableLine::FindNextBox( const SwTable& rTbl,
					 const SwTableBox* pSrchBox, sal_Bool bOvrTblLns ) const
{
	const SwTableLine* pLine = this;			// fuer M800
	SwTableBox* pBox;
	sal_uInt16 nFndPos;
	if( GetTabBoxes().Count() && pSrchBox &&
		USHRT_MAX != ( nFndPos = GetTabBoxes().GetPos( pSrchBox )) &&
		nFndPos + 1 != GetTabBoxes().Count() )
	{
		pBox = GetTabBoxes()[ nFndPos + 1 ];
		while( pBox->GetTabLines().Count() )
			pBox = pBox->GetTabLines()[0]->GetTabBoxes()[0];
		return pBox;
	}

	if( GetUpper() )
	{
		nFndPos = GetUpper()->GetTabLines().GetPos( pLine );
		ASSERT( USHRT_MAX != nFndPos, "Line nicht in der Tabelle" );
		// gibts eine weitere Line
		if( nFndPos+1 >= GetUpper()->GetTabLines().Count() )
			return GetUpper()->GetUpper()->FindNextBox( rTbl, GetUpper(), bOvrTblLns );
		pLine = GetUpper()->GetTabLines()[nFndPos+1];
	}
	else if( bOvrTblLns )		// ueber die "GrundLines" einer Tabelle ?
	{
		// suche in der Tabelle nach der naechsten Line
		nFndPos = rTbl.GetTabLines().GetPos( pLine );
		if( nFndPos + 1 >= rTbl.GetTabLines().Count() )
			return 0;			// es gibt keine weitere Box mehr

		pLine = rTbl.GetTabLines()[ nFndPos+1 ];
	}
	else
		return 0;

	if( pLine->GetTabBoxes().Count() )
	{
		pBox = pLine->GetTabBoxes()[0];
		while( pBox->GetTabLines().Count() )
			pBox = pBox->GetTabLines()[0]->GetTabBoxes()[0];
		return pBox;
	}
	return pLine->FindNextBox( rTbl, 0, bOvrTblLns );
}

// suche ab dieser Line nach der vorherigen Box
SwTableBox* SwTableLine::FindPreviousBox( const SwTable& rTbl,
						 const SwTableBox* pSrchBox, sal_Bool bOvrTblLns ) const
{
	const SwTableLine* pLine = this;			// fuer M800
	SwTableBox* pBox;
	sal_uInt16 nFndPos;
	if( GetTabBoxes().Count() && pSrchBox &&
		USHRT_MAX != ( nFndPos = GetTabBoxes().GetPos( pSrchBox )) &&
		nFndPos )
	{
		pBox = GetTabBoxes()[ nFndPos - 1 ];
		while( pBox->GetTabLines().Count() )
		{
			pLine = pBox->GetTabLines()[pBox->GetTabLines().Count()-1];
			pBox = pLine->GetTabBoxes()[pLine->GetTabBoxes().Count()-1];
		}
		return pBox;
	}

	if( GetUpper() )
	{
		nFndPos = GetUpper()->GetTabLines().GetPos( pLine );
		ASSERT( USHRT_MAX != nFndPos, "Line nicht in der Tabelle" );
		// gibts eine weitere Line
		if( !nFndPos )
			return GetUpper()->GetUpper()->FindPreviousBox( rTbl, GetUpper(), bOvrTblLns );
		pLine = GetUpper()->GetTabLines()[nFndPos-1];
	}
	else if( bOvrTblLns )		// ueber die "GrundLines" einer Tabelle ?
	{
		// suche in der Tabelle nach der naechsten Line
		nFndPos = rTbl.GetTabLines().GetPos( pLine );
		if( !nFndPos )
			return 0;			// es gibt keine weitere Box mehr

		pLine = rTbl.GetTabLines()[ nFndPos-1 ];
	}
	else
		return 0;

	if( pLine->GetTabBoxes().Count() )
	{
		pBox = pLine->GetTabBoxes()[pLine->GetTabBoxes().Count()-1];
		while( pBox->GetTabLines().Count() )
		{
			pLine = pBox->GetTabLines()[pBox->GetTabLines().Count()-1];
			pBox = pLine->GetTabBoxes()[pLine->GetTabBoxes().Count()-1];
		}
		return pBox;
	}
	return pLine->FindPreviousBox( rTbl, 0, bOvrTblLns );
}

// suche ab dieser Line nach der naechsten Box mit Inhalt
SwTableBox* SwTableBox::FindNextBox( const SwTable& rTbl,
						 const SwTableBox* pSrchBox, sal_Bool bOvrTblLns ) const
{
	if( !pSrchBox  && !GetTabLines().Count() )
		return (SwTableBox*)this;
	return GetUpper()->FindNextBox( rTbl, pSrchBox ? pSrchBox : this,
										bOvrTblLns );

}

// suche ab dieser Line nach der naechsten Box mit Inhalt
SwTableBox* SwTableBox::FindPreviousBox( const SwTable& rTbl,
						 const SwTableBox* pSrchBox, sal_Bool bOvrTblLns ) const
{
	if( !pSrchBox && !GetTabLines().Count() )
		return (SwTableBox*)this;
	return GetUpper()->FindPreviousBox( rTbl, pSrchBox ? pSrchBox : this,
										bOvrTblLns );
}


sal_Bool lcl_BoxSetHeadCondColl( const SwTableBox*& rpBox, void* )
{
	// in der HeadLine sind die Absaetze mit BedingtenVorlage anzupassen
	const SwStartNode* pSttNd = rpBox->GetSttNd();
	if( pSttNd )
		pSttNd->CheckSectionCondColl();
	else
		((SwTableBox*)rpBox)->GetTabLines().ForEach( &lcl_LineSetHeadCondColl, 0 );
	return sal_True;
}

sal_Bool lcl_LineSetHeadCondColl( const SwTableLine*& rpLine, void* )
{
	((SwTableLine*)rpLine)->GetTabBoxes().ForEach( &lcl_BoxSetHeadCondColl, 0 );
	return sal_True;
}

/*  */

SwTwips lcl_GetDistance( SwTableBox* pBox, sal_Bool bLeft )
{
	sal_Bool bFirst = sal_True;
	SwTwips nRet = 0;
	SwTableLine* pLine;
	while( pBox && 0 != ( pLine = pBox->GetUpper() ) )
	{
		sal_uInt16 nStt = 0, nPos = pLine->GetTabBoxes().C40_GETPOS( SwTableBox, pBox );

		if( bFirst && !bLeft )
			++nPos;
		bFirst = sal_False;

		while( nStt < nPos )
			nRet += pLine->GetTabBoxes()[ nStt++ ]->GetFrmFmt()
							->GetFrmSize().GetWidth();
		pBox = pLine->GetUpper();
	}
	return nRet;
}

sal_Bool lcl_SetSelBoxWidth( SwTableLine* pLine, CR_SetBoxWidth& rParam,
						 SwTwips nDist, sal_Bool bCheck )
{
	SwTableBoxes& rBoxes = pLine->GetTabBoxes();
	for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pBox = rBoxes[ n ];
		SwFrmFmt* pFmt = pBox->GetFrmFmt();
		const SwFmtFrmSize& rSz = pFmt->GetFrmSize();
		SwTwips nWidth = rSz.GetWidth();
        sal_Bool bGreaterBox = sal_False;

		if( bCheck )
		{
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
				if( !::lcl_SetSelBoxWidth( pBox->GetTabLines()[ i ], rParam,
											nDist, sal_True ))
					return sal_False;

            // dann noch mal alle "ContentBoxen" sammeln
            if( ( 0 != ( bGreaterBox = TBLFIX_CHGABS != rParam.nMode && ( nDist + ( rParam.bLeft ? 0 : nWidth ) ) >= rParam.nSide)) ||
                ( !rParam.bBigger && ( Abs( nDist + (( rParam.nMode && rParam.bLeft ) ? 0 : nWidth ) - rParam.nSide ) < COLFUZZY ) ) )
            {
				rParam.bAnyBoxFnd = sal_True;
				SwTwips nLowerDiff;
				if( bGreaterBox && TBLFIX_CHGPROP == rParam.nMode )
				{
					// die "anderen Boxen" wurden angepasst,
					// also sich um diesen Betrag aendern
					nLowerDiff = (nDist + ( rParam.bLeft ? 0 : nWidth ) ) - rParam.nSide;
					nLowerDiff *= rParam.nDiff;
					nLowerDiff /= rParam.nMaxSize;
					nLowerDiff = rParam.nDiff - nLowerDiff;
				}
				else
					nLowerDiff = rParam.nDiff;

				if( nWidth < nLowerDiff || nWidth - nLowerDiff < MINLAY )
					return sal_False;
			}
		}
		else
		{
			SwTwips nLowerDiff = 0, nOldLower = rParam.nLowerDiff;
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			{
				rParam.nLowerDiff = 0;
				lcl_SetSelBoxWidth( pBox->GetTabLines()[ i ], rParam, nDist, sal_False );

				if( nLowerDiff < rParam.nLowerDiff )
					nLowerDiff = rParam.nLowerDiff;
			}
			rParam.nLowerDiff = nOldLower;


			if( nLowerDiff ||
                 ( 0 != ( bGreaterBox = !nOldLower && TBLFIX_CHGABS != rParam.nMode &&
                    ( nDist + ( rParam.bLeft ? 0 : nWidth ) ) >= rParam.nSide)) ||
                ( Abs( nDist + ( (rParam.nMode && rParam.bLeft) ? 0 : nWidth )
                            - rParam.nSide ) < COLFUZZY ))
			{
				// in dieser Spalte ist der Cursor - also verkleinern / vergroessern
				SwFmtFrmSize aNew( rSz );

				if( !nLowerDiff )
				{
					if( bGreaterBox && TBLFIX_CHGPROP == rParam.nMode )
					{
						// die "anderen Boxen" wurden angepasst,
						// also sich um diesen Betrag aendern
						nLowerDiff = (nDist + ( rParam.bLeft ? 0 : nWidth ) ) - rParam.nSide;
						nLowerDiff *= rParam.nDiff;
						nLowerDiff /= rParam.nMaxSize;
						nLowerDiff = rParam.nDiff - nLowerDiff;
					}
					else
						nLowerDiff = rParam.nDiff;
				}

				rParam.nLowerDiff += nLowerDiff;

				if( rParam.bBigger )
					aNew.SetWidth( nWidth + nLowerDiff );
				else
					aNew.SetWidth( nWidth - nLowerDiff );
				rParam.aShareFmts.SetSize( *pBox, aNew );
				break;
			}
		}

		if( rParam.bLeft && rParam.nMode && nDist >= rParam.nSide )
			break;

		nDist += nWidth;

		// wenns groesser wird, dann wars das
		if( ( TBLFIX_CHGABS == rParam.nMode || !rParam.bLeft ) &&
				nDist >= rParam.nSide )
			break;
	}
	return sal_True;
}

sal_Bool lcl_SetOtherBoxWidth( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck )
{
	SwTableBoxes& rBoxes = pLine->GetTabBoxes();
	for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pBox = rBoxes[ n ];
		SwFrmFmt* pFmt = pBox->GetFrmFmt();
		const SwFmtFrmSize& rSz = pFmt->GetFrmSize();
		SwTwips nWidth = rSz.GetWidth();

		if( bCheck )
		{
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
				if( !::lcl_SetOtherBoxWidth( pBox->GetTabLines()[ i ],
													rParam, nDist, sal_True ))
					return sal_False;

			if( rParam.bBigger && ( TBLFIX_CHGABS == rParam.nMode
					? Abs( nDist - rParam.nSide ) < COLFUZZY
					: ( rParam.bLeft ? nDist < rParam.nSide - COLFUZZY
									 : nDist >= rParam.nSide - COLFUZZY )) )
			{
				rParam.bAnyBoxFnd = sal_True;
				SwTwips nDiff;
				if( TBLFIX_CHGPROP == rParam.nMode )		// Tabelle fix, proport.
				{
					// relativ berechnen
					nDiff = nWidth;
					nDiff *= rParam.nDiff;
					nDiff /= rParam.nMaxSize;
				}
				else
					nDiff = rParam.nDiff;

				if( nWidth < nDiff || nWidth - nDiff < MINLAY )
					return sal_False;
			}
		}
		else
		{
			SwTwips nLowerDiff = 0, nOldLower = rParam.nLowerDiff;
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			{
				rParam.nLowerDiff = 0;
				lcl_SetOtherBoxWidth( pBox->GetTabLines()[ i ], rParam,
											nDist, sal_False );

				if( nLowerDiff < rParam.nLowerDiff )
					nLowerDiff = rParam.nLowerDiff;
			}
			rParam.nLowerDiff = nOldLower;

			if( nLowerDiff ||
				( TBLFIX_CHGABS == rParam.nMode
						? Abs( nDist - rParam.nSide ) < COLFUZZY
						: ( rParam.bLeft ? nDist < rParam.nSide - COLFUZZY
										 : nDist >= rParam.nSide - COLFUZZY)
				 ) )
			{
				SwFmtFrmSize aNew( rSz );

				if( !nLowerDiff )
				{
					if( TBLFIX_CHGPROP == rParam.nMode )		// Tabelle fix, proport.
					{
						// relativ berechnen
						nLowerDiff = nWidth;
						nLowerDiff *= rParam.nDiff;
						nLowerDiff /= rParam.nMaxSize;
					}
					else
						nLowerDiff = rParam.nDiff;
				}

				rParam.nLowerDiff += nLowerDiff;

				if( rParam.bBigger )
					aNew.SetWidth( nWidth - nLowerDiff );
				else
					aNew.SetWidth( nWidth + nLowerDiff );

				rParam.aShareFmts.SetSize( *pBox, aNew );
			}
		}

		nDist += nWidth;
		if( ( TBLFIX_CHGABS == rParam.nMode || rParam.bLeft ) &&
			nDist > rParam.nSide )
			break;
	}
	return sal_True;
}

/**/

sal_Bool lcl_InsSelBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
							SwTwips nDist, sal_Bool bCheck )
{
	SwTableBoxes& rBoxes = pLine->GetTabBoxes();
	sal_uInt16 n, nCmp;
	for( n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pBox = rBoxes[ n ];
		SwTableBoxFmt* pFmt = (SwTableBoxFmt*)pBox->GetFrmFmt();
		const SwFmtFrmSize& rSz = pFmt->GetFrmSize();
		SwTwips nWidth = rSz.GetWidth();

		if( bCheck )
		{
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
				if( !::lcl_InsSelBox( pBox->GetTabLines()[ i ], rParam,
											nDist, sal_True ))
					return sal_False;

			// dann noch mal alle "ContentBoxen" sammeln
			if( Abs( nDist + ( rParam.bLeft ? 0 : nWidth )
					- rParam.nSide ) < COLFUZZY )
				nCmp = 1;
			else if( nDist + ( rParam.bLeft ? 0 : nWidth/2 ) > rParam.nSide )
				nCmp = 2;
			else
				nCmp = 0;

			if( nCmp )
			{
				rParam.bAnyBoxFnd = sal_True;
				if( pFmt->GetProtect().IsCntntProtected() )
					return sal_False;

				if( rParam.bSplittBox &&
					nWidth - rParam.nDiff <= COLFUZZY +
						( 567 / 2 /* min. 0,5 cm Platz lassen*/) )
					return sal_False;

				if( pBox->GetSttNd() )
					rParam.aBoxes.Insert( pBox );

				break;
			}
		}
		else
		{
			SwTwips nLowerDiff = 0, nOldLower = rParam.nLowerDiff;
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			{
				rParam.nLowerDiff = 0;
				lcl_InsSelBox( pBox->GetTabLines()[ i ], rParam, nDist, sal_False );

				if( nLowerDiff < rParam.nLowerDiff )
					nLowerDiff = rParam.nLowerDiff;
			}
			rParam.nLowerDiff = nOldLower;

			if( nLowerDiff )
				nCmp = 1;
			else if( Abs( nDist + ( rParam.bLeft ? 0 : nWidth )
								- rParam.nSide ) < COLFUZZY )
				nCmp = 2;
			else if( nDist + nWidth / 2 > rParam.nSide )
				nCmp = 3;
			else
				nCmp = 0;

			if( nCmp )
			{
				// in dieser Spalte ist der Cursor - also verkleinern / vergroessern
				if( 1 == nCmp )
				{
					if( !rParam.bSplittBox )
					{
						// die akt. Box auf
						SwFmtFrmSize aNew( rSz );
						aNew.SetWidth( nWidth + rParam.nDiff );
						rParam.aShareFmts.SetSize( *pBox, aNew );
					}
				}
				else
				{
					ASSERT( pBox->GetSttNd(), "Das muss eine EndBox sein!");

					if( !rParam.bLeft && 3 != nCmp )
						++n;

					::_InsTblBox( pFmt->GetDoc(), rParam.pTblNd,
										pLine, pFmt, pBox, n );

					SwTableBox* pNewBox = rBoxes[ n ];
					SwFmtFrmSize aNew( rSz );
					aNew.SetWidth( rParam.nDiff );
					rParam.aShareFmts.SetSize( *pNewBox, aNew );

					// Sonderfall: kein Platz in den anderen Boxen
					//				aber in der Zelle
					if( rParam.bSplittBox )
					{
						// die akt. Box auf
						SwFmtFrmSize aNewSize( rSz );
						aNewSize.SetWidth( nWidth - rParam.nDiff );
						rParam.aShareFmts.SetSize( *pBox, aNewSize );
					}

					// Sonderbehandlung fuer Umrandung die Rechte muss
					// entfernt werden
					{
						const SvxBoxItem& rBoxItem = pBox->GetFrmFmt()->GetBox();
						if( rBoxItem.GetRight() )
						{
							SvxBoxItem aTmp( rBoxItem );
							aTmp.SetLine( 0, BOX_LINE_RIGHT );
                            rParam.aShareFmts.SetAttr( rParam.bLeft
															? *pNewBox
															: *pBox, aTmp );
						}
					}
				}

				rParam.nLowerDiff = rParam.nDiff;
				break;
			}
		}

		if( rParam.bLeft && rParam.nMode && nDist >= rParam.nSide )
			break;

		nDist += nWidth;
	}
	return sal_True;
}

sal_Bool lcl_InsOtherBox( SwTableLine* pLine, CR_SetBoxWidth& rParam,
								SwTwips nDist, sal_Bool bCheck )
{
	// Sonderfall: kein Platz in den anderen Boxen aber in der Zelle
	if( rParam.bSplittBox )
		return sal_True;

	SwTableBoxes& rBoxes = pLine->GetTabBoxes();
	sal_uInt16 n;

	// Tabelle fix, proport.
	if( !rParam.nRemainWidth && TBLFIX_CHGPROP == rParam.nMode )
	{
		// dann die richtige Breite suchen, auf die sich die relative
		// Breitenanpassung bezieht.
		SwTwips nTmpDist = nDist;
		for( n = 0; n < rBoxes.Count(); ++n )
		{
			SwTwips nWidth = rBoxes[ n ]->GetFrmFmt()->GetFrmSize().GetWidth();
			if( (nTmpDist + nWidth / 2 ) > rParam.nSide )
			{
				rParam.nRemainWidth = rParam.bLeft
										? sal_uInt16(nTmpDist)
										: sal_uInt16(rParam.nTblWidth - nTmpDist);
				break;
			}
			nTmpDist += nWidth;
		}
	}

	for( n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pBox = rBoxes[ n ];
		SwFrmFmt* pFmt = pBox->GetFrmFmt();
		const SwFmtFrmSize& rSz = pFmt->GetFrmSize();
		SwTwips nWidth = rSz.GetWidth();

		if( bCheck )
		{
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
				if( !::lcl_InsOtherBox( pBox->GetTabLines()[ i ],
													rParam, nDist, sal_True ))
					return sal_False;

			if(
				rParam.bLeft ? ((nDist + nWidth / 2 ) <= rParam.nSide &&
								(TBLFIX_CHGABS != rParam.nMode ||
								(n < rBoxes.Count() &&
								(nDist + nWidth + rBoxes[ n+1 ]->
									GetFrmFmt()->GetFrmSize().GetWidth() / 2)
								  > rParam.nSide) ))
							 : (nDist + nWidth / 2 ) > rParam.nSide
				)
			{
				rParam.bAnyBoxFnd = sal_True;
				SwTwips nDiff;
				if( TBLFIX_CHGPROP == rParam.nMode )		// Tabelle fix, proport.
				{
					// relativ berechnen
					nDiff = nWidth;
					nDiff *= rParam.nDiff;
					nDiff /= rParam.nRemainWidth;

					if( nWidth < nDiff || nWidth - nDiff < MINLAY )
						return sal_False;
				}
				else
				{
					nDiff = rParam.nDiff;

					// teste ob die linke oder rechte Box gross genug
					// ist, um den Platz abzugeben!
					// es wird davor oder dahinter eine Box eingefuegt!
					SwTwips nTmpWidth = nWidth;
					if( rParam.bLeft && pBox->GetUpper()->GetUpper() )
					{
						const SwTableBox* pTmpBox = pBox;
						sal_uInt16 nBoxPos = n;
						while( !nBoxPos && pTmpBox->GetUpper()->GetUpper() )
						{
							pTmpBox = pTmpBox->GetUpper()->GetUpper();
							nBoxPos = pTmpBox->GetUpper()->GetTabBoxes().GetPos( pTmpBox );
						}
//						if( nBoxPos )
							nTmpWidth = pTmpBox->GetFrmFmt()->GetFrmSize().GetWidth();
//						else
//							nTmpWidth = 0;
					}

					if( nTmpWidth < nDiff || nTmpWidth - nDiff < MINLAY )
						return sal_False;
					break;
				}
			}
		}
		else
		{
			SwTwips nLowerDiff = 0, nOldLower = rParam.nLowerDiff;
			for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			{
				rParam.nLowerDiff = 0;
				lcl_InsOtherBox( pBox->GetTabLines()[ i ], rParam,
										nDist, sal_False );

				if( nLowerDiff < rParam.nLowerDiff )
					nLowerDiff = rParam.nLowerDiff;
			}
			rParam.nLowerDiff = nOldLower;

			if( nLowerDiff ||
				(rParam.bLeft ? ((nDist + nWidth / 2 ) <= rParam.nSide &&
								(TBLFIX_CHGABS != rParam.nMode ||
								(n < rBoxes.Count() &&
								(nDist + nWidth + rBoxes[ n+1 ]->
									GetFrmFmt()->GetFrmSize().GetWidth() / 2)
								  > rParam.nSide) ))
							  : (nDist + nWidth / 2 ) > rParam.nSide ))
			{
				if( !nLowerDiff )
				{
					if( TBLFIX_CHGPROP == rParam.nMode )		// Tabelle fix, proport.
					{
						// relativ berechnen
						nLowerDiff = nWidth;
						nLowerDiff *= rParam.nDiff;
						nLowerDiff /= rParam.nRemainWidth;
					}
					else
						nLowerDiff = rParam.nDiff;
				}

				SwFmtFrmSize aNew( rSz );
				rParam.nLowerDiff += nLowerDiff;

				if( rParam.bBigger )
					aNew.SetWidth( nWidth - nLowerDiff );
				else
					aNew.SetWidth( nWidth + nLowerDiff );
				rParam.aShareFmts.SetSize( *pBox, aNew );

				if( TBLFIX_CHGABS == rParam.nMode )
					break;
			}
		}

		nDist += nWidth;
	}
	return sal_True;
}


// das Ergebnis des Positions Vergleiches
//	POS_BEFORE,				// Box liegt davor
//	POS_BEHIND,				// Box liegt dahinter
//	POS_INSIDE,				// Box liegt vollstaendig in Start/End
//	POS_OUTSIDE,			// Box ueberlappt Start/End vollstaendig
//	POS_EQUAL,				// Box und Start/End sind gleich
//	POS_OVERLAP_BEFORE,		// Box ueberlappt den Start
//	POS_OVERLAP_BEHIND 		// Box ueberlappt das Ende

SwComparePosition _CheckBoxInRange( sal_uInt16 nStt, sal_uInt16 nEnd,
									sal_uInt16 nBoxStt, sal_uInt16 nBoxEnd )
{
// COLFUZZY noch beachten!!
	SwComparePosition nRet;
	if( nBoxStt + COLFUZZY < nStt )
	{
		if( nBoxEnd > nStt + COLFUZZY )
		{
			if( nBoxEnd >= nEnd + COLFUZZY )
				nRet = POS_OUTSIDE;
			else
				nRet = POS_OVERLAP_BEFORE;
		}
		else
			nRet = POS_BEFORE;
	}
	else if( nEnd > nBoxStt + COLFUZZY )
	{
		if( nEnd + COLFUZZY >= nBoxEnd )
		{
			if( COLFUZZY > Abs( long(nEnd) - long(nBoxEnd) ) &&
				COLFUZZY > Abs( long(nStt) - long(nBoxStt) ) )
				nRet = POS_EQUAL;
			else
				nRet = POS_INSIDE;
		}
		else
			nRet = POS_OVERLAP_BEHIND;
	}
	else
		nRet = POS_BEHIND;

	return nRet;
}

void lcl_DelSelBox_CorrLowers( SwTableLine& rLine, CR_SetBoxWidth& rParam,
								SwTwips nWidth )
{
	// 1. Schritt die eigene Breite feststellen
	SwTableBoxes& rBoxes = rLine.GetTabBoxes();
	SwTwips nBoxWidth = 0;
	sal_uInt16 n;

	for( n = rBoxes.Count(); n; )
		nBoxWidth += rBoxes[ --n ]->GetFrmFmt()->GetFrmSize().GetWidth();

	if( COLFUZZY < Abs( nWidth - nBoxWidth ))
	{
		//  sie muessen also angepasst werden
		for( n = rBoxes.Count(); n; )
		{
			SwTableBox* pBox = rBoxes[ --n ];
			SwFmtFrmSize aNew( pBox->GetFrmFmt()->GetFrmSize() );
			long nDiff = aNew.GetWidth();
			nDiff *= nWidth;
			nDiff /= nBoxWidth;
			aNew.SetWidth( nDiff );

			rParam.aShareFmts.SetSize( *pBox, aNew );

			if( !pBox->GetSttNd() )
			{
				// hat selbst auch Lower, also auch die anpassen
				for( sal_uInt16 i = pBox->GetTabLines().Count(); i; )
					::lcl_DelSelBox_CorrLowers( *pBox->GetTabLines()[ --i ],
												rParam, nDiff  );
			}
		}
	}
}

void lcl_ChgBoxSize( SwTableBox& rBox, CR_SetBoxWidth& rParam,
					const SwFmtFrmSize& rOldSz,
					sal_uInt16& rDelWidth, SwTwips nDist )
{
	long nDiff = 0;
	sal_Bool bSetSize = sal_False;

	switch( rParam.nMode )
	{
	case TBLFIX_CHGABS:		// Tabelle feste Breite, den Nachbar andern
		nDiff = rDelWidth + rParam.nLowerDiff;
		bSetSize = sal_True;
		break;

	case TBLFIX_CHGPROP:	// Tabelle feste Breite, alle Nachbarn aendern
		if( !rParam.nRemainWidth )
		{
			// dann kurz berechnen:
			if( rParam.bLeft )
				rParam.nRemainWidth = sal_uInt16(nDist);
			else
				rParam.nRemainWidth = sal_uInt16(rParam.nTblWidth - nDist);
		}

		// relativ berechnen
		nDiff = rOldSz.GetWidth();
		nDiff *= rDelWidth + rParam.nLowerDiff;
		nDiff /= rParam.nRemainWidth;

		bSetSize = sal_True;
		break;

	case TBLVAR_CHGABS:		// Tabelle variable, alle Nachbarn aendern
		if( COLFUZZY < Abs( rParam.nBoxWidth -
							( rDelWidth + rParam.nLowerDiff )))
		{
			nDiff = rDelWidth + rParam.nLowerDiff - rParam.nBoxWidth;
			if( 0 < nDiff )
				rDelWidth = rDelWidth - sal_uInt16(nDiff);
			else
				rDelWidth = rDelWidth + sal_uInt16(-nDiff);
			bSetSize = sal_True;
		}
		break;
	}

	if( bSetSize )
	{
		SwFmtFrmSize aNew( rOldSz );
		aNew.SetWidth( aNew.GetWidth() + nDiff );
		rParam.aShareFmts.SetSize( rBox, aNew );

		// dann leider nochmals die Lower anpassen
		for( sal_uInt16 i = rBox.GetTabLines().Count(); i; )
			::lcl_DelSelBox_CorrLowers( *rBox.GetTabLines()[ --i ], rParam,
											aNew.GetWidth() );
	}
}

sal_Bool lcl_DeleteBox_Rekursiv( CR_SetBoxWidth& rParam, SwTableBox& rBox,
							sal_Bool bCheck )
{
	sal_Bool bRet = sal_True;
	if( rBox.GetSttNd() )
	{
		if( bCheck )
		{
			rParam.bAnyBoxFnd = sal_True;
			if( rBox.GetFrmFmt()->GetProtect().IsCntntProtected() )
				bRet = sal_False;
			else
			{
				SwTableBox* pBox = &rBox;
				rParam.aBoxes.Insert( pBox );
			}
		}
		else
			::_DeleteBox( rParam.pTblNd->GetTable(), &rBox,
							rParam.pUndo, sal_False, sal_True, &rParam.aShareFmts );
	}
	else
	{
		// die muessen leider alle sequentiel ueber die
		// Contentboxen geloescht werden
		for( sal_uInt16 i = rBox.GetTabLines().Count(); i; )
		{
			SwTableLine& rLine = *rBox.GetTabLines()[ --i ];
			for( sal_uInt16 n = rLine.GetTabBoxes().Count(); n; )
				if( !::lcl_DeleteBox_Rekursiv( rParam,
								*rLine.GetTabBoxes()[ --n ], bCheck ))
					return sal_False;
		}
	}
	return bRet;
}

sal_Bool lcl_DelSelBox( SwTableLine* pTabLine, CR_SetBoxWidth& rParam,
					SwTwips nDist, sal_Bool bCheck )
{
	SwTableBoxes& rBoxes = pTabLine->GetTabBoxes();
	sal_uInt16 n, nCntEnd, nBoxChkStt, nBoxChkEnd, nDelWidth = 0;
	if( rParam.bLeft )
	{
		n = rBoxes.Count();
		nCntEnd = 0;
		nBoxChkStt = (sal_uInt16)rParam.nSide;
		nBoxChkEnd = static_cast<sal_uInt16>(rParam.nSide + rParam.nBoxWidth);
	}
	else
	{
		n = 0;
		nCntEnd = rBoxes.Count();
		nBoxChkStt = static_cast<sal_uInt16>(rParam.nSide - rParam.nBoxWidth);
		nBoxChkEnd = (sal_uInt16)rParam.nSide;
	}


	while( n != nCntEnd )
	{
		SwTableBox* pBox;
		if( rParam.bLeft )
			pBox = rBoxes[ --n ];
		else
			pBox = rBoxes[ n++ ];

		SwFrmFmt* pFmt = pBox->GetFrmFmt();
		const SwFmtFrmSize& rSz = pFmt->GetFrmSize();
		long nWidth = rSz.GetWidth();
		sal_Bool bDelBox = sal_False, bChgLowers = sal_False;

		// die Boxenbreite testen und entpsrechend reagieren
		SwComparePosition ePosType = ::_CheckBoxInRange(
							nBoxChkStt, nBoxChkEnd,
							sal_uInt16(rParam.bLeft ? nDist - nWidth : nDist),
							sal_uInt16(rParam.bLeft ? nDist : nDist + nWidth));

		switch( ePosType )
		{
		case POS_BEFORE:
			if( bCheck )
			{
				if( rParam.bLeft )
					return sal_True;
			}
			else if( rParam.bLeft )
			{
				::lcl_ChgBoxSize( *pBox, rParam, rSz, nDelWidth, nDist );
				if( TBLFIX_CHGABS == rParam.nMode )
					n = nCntEnd;
			}
			break;

		case POS_BEHIND:
			if( bCheck )
			{
				if( !rParam.bLeft )
					return sal_True;
			}
			else if( !rParam.bLeft )
			{
				::lcl_ChgBoxSize( *pBox, rParam, rSz, nDelWidth, nDist );
				if( TBLFIX_CHGABS == rParam.nMode )
					n = nCntEnd;
			}
			break;

		case POS_OUTSIDE:			// Box ueberlappt Start/End vollstaendig
		case POS_INSIDE:			// Box liegt vollstaendig in Start/End
		case POS_EQUAL:				// Box und Start/End sind gleich
			bDelBox = sal_True;
			break;

		case POS_OVERLAP_BEFORE:	 // Box ueberlappt den Start
			if( nBoxChkStt <= ( nDist + (rParam.bLeft ? - nWidth / 2
													  : nWidth / 2 )))
			{
				if( !pBox->GetSttNd() )
					bChgLowers = sal_True;
				else
					bDelBox = sal_True;
			}
			else if( !bCheck && rParam.bLeft )
			{
				if( !pBox->GetSttNd() )
					bChgLowers = sal_True;
				else
				{
					::lcl_ChgBoxSize( *pBox, rParam, rSz, nDelWidth, nDist );
					if( TBLFIX_CHGABS == rParam.nMode )
						n = nCntEnd;
				}
			}
			break;

		case POS_OVERLAP_BEHIND: 	 // Box ueberlappt das Ende
			// JP 10.02.99:
			// generell loeschen oder wie beim OVERLAP_Before nur die, die
			// bis zur Haelfte in die "Loesch-"Box reicht ???
			if( !pBox->GetSttNd() )
				bChgLowers = sal_True;
			else
				bDelBox = sal_True;
			break;
        default: break;
		}

		if( bDelBox )
		{
			nDelWidth = nDelWidth + sal_uInt16(nWidth);
			if( bCheck )
			{
				// die letzte/erste Box kann nur bei Tbl-Var geloescht werden,
				// wenn diese so gross ist, wie die Aenderung an der Tabelle
				if( (( TBLVAR_CHGABS != rParam.nMode ||
						nDelWidth != rParam.nBoxWidth ) &&
					 COLFUZZY > Abs( rParam.bLeft
									? nWidth - nDist
									: (nDist + nWidth - rParam.nTblWidth )))
					|| !::lcl_DeleteBox_Rekursiv( rParam, *pBox, bCheck ) )
					return sal_False;

				if( pFmt->GetProtect().IsCntntProtected() )
					return sal_False;
			}
			else
			{
				::lcl_DeleteBox_Rekursiv( rParam, *pBox, bCheck );

				if( !rParam.bLeft )
					--n, --nCntEnd;
			}
		}
		else if( bChgLowers )
		{
			sal_Bool bFirst = sal_True, bCorrLowers = sal_False;
			long nLowerDiff = 0;
			long nOldLower = rParam.nLowerDiff;
			sal_uInt16 nOldRemain = rParam.nRemainWidth;
			sal_uInt16 i;

			for( i = pBox->GetTabLines().Count(); i; )
			{
				rParam.nLowerDiff = nDelWidth + nOldLower;
				rParam.nRemainWidth = nOldRemain;
				SwTableLine* pLine = pBox->GetTabLines()[ --i ];
				if( !::lcl_DelSelBox( pLine, rParam, nDist, bCheck ))
					return sal_False;

				// gibt es die Box und die darin enthaltenen Lines noch??
				if( n < rBoxes.Count() &&
					pBox == rBoxes[ rParam.bLeft ? n : n-1 ] &&
					i < pBox->GetTabLines().Count() &&
					pLine == pBox->GetTabLines()[ i ] )
				{
					if( !bFirst && !bCorrLowers &&
						COLFUZZY < Abs( nLowerDiff - rParam.nLowerDiff ) )
						bCorrLowers = sal_True;

					// die groesste "loesch" Breite entscheidet, aber nur wenn
					// nicht die gesamte Line geloescht wurde
					if( nLowerDiff < rParam.nLowerDiff )
						nLowerDiff = rParam.nLowerDiff;

					bFirst = sal_False;
				}
			}
			rParam.nLowerDiff = nOldLower;
			rParam.nRemainWidth = nOldRemain;

			// wurden alle Boxen geloescht? Dann ist die DelBreite natuerlich
			// die Boxenbreite
			if( !nLowerDiff )
				nLowerDiff = nWidth;

			// DelBreite anpassen!!
			nDelWidth = nDelWidth + sal_uInt16(nLowerDiff);

			if( !bCheck )
			{
				// wurde die Box schon entfernt?
				if( n > rBoxes.Count() ||
					pBox != rBoxes[ ( rParam.bLeft ? n : n-1 ) ] )
				{
					// dann beim Loeschen nach rechts die Laufvar. anpassen
					if( !rParam.bLeft )
						--n, --nCntEnd;
				}
				else
				{
					// sonst muss die Groesse der Box angepasst werden
					SwFmtFrmSize aNew( rSz );
					sal_Bool bCorrRel = sal_False;

					if( TBLVAR_CHGABS != rParam.nMode )
					{
						switch( ePosType )
						{
						case POS_OVERLAP_BEFORE:	// Box ueberlappt den Start
							if( TBLFIX_CHGPROP == rParam.nMode )
								bCorrRel = rParam.bLeft;
							else if( rParam.bLeft )	// TBLFIX_CHGABS
							{
								nLowerDiff = nLowerDiff - nDelWidth;
								bCorrLowers = sal_True;
								n = nCntEnd;
							}
							break;

						case POS_OVERLAP_BEHIND: 	// Box ueberlappt das Ende
							if( TBLFIX_CHGPROP == rParam.nMode )
								bCorrRel = !rParam.bLeft;
							else if( !rParam.bLeft )	// TBLFIX_CHGABS
							{
								nLowerDiff = nLowerDiff - nDelWidth;
								bCorrLowers = sal_True;
								n = nCntEnd;
							}
							break;

						default:
							ASSERT( !pBox, "hier sollte man nie hinkommen" );
							break;
						}
					}

					if( bCorrRel )
					{
						if( !rParam.nRemainWidth )
						{
							// dann kurz berechnen:
							if( rParam.bLeft )
								rParam.nRemainWidth = sal_uInt16(nDist - nLowerDiff);
							else
								rParam.nRemainWidth = sal_uInt16(rParam.nTblWidth - nDist
																- nLowerDiff );
						}

						long nDiff = aNew.GetWidth() - nLowerDiff;
						nDiff *= nDelWidth + rParam.nLowerDiff;
						nDiff /= rParam.nRemainWidth;

						aNew.SetWidth( aNew.GetWidth() - nLowerDiff + nDiff );
					}
					else
						aNew.SetWidth( aNew.GetWidth() - nLowerDiff );
					rParam.aShareFmts.SetSize( *pBox, aNew );

					if( bCorrLowers )
					{
						// dann leider nochmals die Lower anpassen
						for( i = pBox->GetTabLines().Count(); i; )
							::lcl_DelSelBox_CorrLowers( *pBox->
								GetTabLines()[ --i ], rParam, aNew.GetWidth() );
					}
				}
			}
		}

		if( rParam.bLeft )
			nDist -= nWidth;
		else
			nDist += nWidth;
	}
	rParam.nLowerDiff = nDelWidth;
	return sal_True;
}

// Dummy Funktion fuer die Methode SetColWidth
sal_Bool lcl_DelOtherBox( SwTableLine* , CR_SetBoxWidth& , SwTwips , sal_Bool )
{
	return sal_True;
}

/**/

void lcl_AjustLines( SwTableLine* pLine, CR_SetBoxWidth& rParam )
{
	SwTableBoxes& rBoxes = pLine->GetTabBoxes();
	for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox* pBox = rBoxes[ n ];

		SwFmtFrmSize aSz( pBox->GetFrmFmt()->GetFrmSize() );
		SwTwips nWidth = aSz.GetWidth();
		nWidth *= rParam.nDiff;
		nWidth /= rParam.nMaxSize;
		aSz.SetWidth( nWidth );
		rParam.aShareFmts.SetSize( *pBox, aSz );

		for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			::lcl_AjustLines( pBox->GetTabLines()[ i ], rParam );
	}
}

#if defined(DBG_UTIL) || defined( JP_DEBUG )

void _CheckBoxWidth( const SwTableLine& rLine, SwTwips nSize )
{
	const SwTableBoxes& rBoxes = rLine.GetTabBoxes();

	SwTwips nAktSize = 0;
	// checke doch mal ob die Tabellen korrekte Breiten haben
	for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n  )
	{
		const SwTableBox* pBox = rBoxes[ n ];
		const SwTwips nBoxW = pBox->GetFrmFmt()->GetFrmSize().GetWidth();
		nAktSize += nBoxW;

		for( sal_uInt16 i = 0; i < pBox->GetTabLines().Count(); ++i )
			_CheckBoxWidth( *pBox->GetTabLines()[ i ], nBoxW );
	}

	if( Abs( nAktSize - nSize ) > ( COLFUZZY * rBoxes.Count() ) )
	{
		DBG_ERROR( "Boxen der Line zu klein/gross" );
#if defined( WNT ) && defined( JP_DEBUG )
		__asm int 3;
#endif
	}
}

#endif

_FndBox* lcl_SaveInsDelData( CR_SetBoxWidth& rParam, SwUndo** ppUndo,
								SwTableSortBoxes& rTmpLst, SwTwips nDistStt )
{
	// suche alle Boxen / Lines
	SwTable& rTbl = rParam.pTblNd->GetTable();

	if( !rParam.aBoxes.Count() )
	{
		// erstmal die Boxen besorgen !
		if( rParam.bBigger )
			for( sal_uInt16 n = 0; n < rTbl.GetTabLines().Count(); ++n )
				::lcl_DelSelBox( rTbl.GetTabLines()[ n ], rParam, nDistStt, sal_True );
		else
			for( sal_uInt16 n = 0; n < rTbl.GetTabLines().Count(); ++n )
				::lcl_InsSelBox( rTbl.GetTabLines()[ n ], rParam, nDistStt, sal_True );
	}

	// loeschen der gesamten Tabelle verhindern
	if( rParam.bBigger && rParam.aBoxes.Count() ==
		rTbl.GetTabSortBoxes().Count() )
		return 0;

	_FndBox* pFndBox = new _FndBox( 0, 0 );
	if( rParam.bBigger )
		pFndBox->SetTableLines( rParam.aBoxes, rTbl );
	else
	{
		_FndPara aPara( rParam.aBoxes, pFndBox );
		rTbl.GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
		ASSERT( pFndBox->GetLines().Count(), "Wo sind die Boxen" );
		pFndBox->SetTableLines( rTbl );

		if( ppUndo )
			rTmpLst.Insert( &rTbl.GetTabSortBoxes(), 0, rTbl.GetTabSortBoxes().Count() );
	}

	//Lines fuer das Layout-Update herausuchen.
	pFndBox->DelFrms( rTbl );

	// TL_CHART2: this function gest called from SetColWidth exclusively,
	// thus it is currently speculated that nothing needs to be done here.
	// Note: that SetColWidth is currently not completely understood though :-(

	return pFndBox;
}

sal_Bool SwTable::SetColWidth( SwTableBox& rAktBox, sal_uInt16 eType,
						SwTwips nAbsDiff, SwTwips nRelDiff, SwUndo** ppUndo )
{
	SetHTMLTableLayout( 0 ); 	// MIB 9.7.97: HTML-Layout loeschen

	const SwFmtFrmSize& rSz = GetFrmFmt()->GetFrmSize();
	const SvxLRSpaceItem& rLR = GetFrmFmt()->GetLRSpace();

	_FndBox* pFndBox = 0;					// fuers Einfuegen/Loeschen
	SwTableSortBoxes aTmpLst( 0, 5 );		// fuers Undo
	sal_Bool bBigger,
		bRet = sal_False,
		bLeft = nsTblChgWidthHeightType::WH_COL_LEFT == ( eType & 0xff ) ||
				nsTblChgWidthHeightType::WH_CELL_LEFT == ( eType & 0xff ),
		bInsDel = 0 != (eType & nsTblChgWidthHeightType::WH_FLAG_INSDEL );
	sal_uInt16 n;
	sal_uLong nBoxIdx = rAktBox.GetSttIdx();

	// bestimme die akt. Kante der Box
	// wird nur fuer die Breitenmanipulation benoetigt!
	const SwTwips nDist = ::lcl_GetDistance( &rAktBox, bLeft );
    SwTwips nDistStt = 0;
	CR_SetBoxWidth aParam( eType, nRelDiff, nDist, rSz.GetWidth(),
							bLeft ? nDist : rSz.GetWidth() - nDist,
							(SwTableNode*)rAktBox.GetSttNd()->FindTableNode() );
	bBigger = aParam.bBigger;

	FN_lcl_SetBoxWidth fnSelBox, fnOtherBox;
	if( bInsDel )
	{
		if( bBigger )
		{
			fnSelBox = lcl_DelSelBox;
			fnOtherBox = lcl_DelOtherBox;
			aParam.nBoxWidth = (sal_uInt16)rAktBox.GetFrmFmt()->GetFrmSize().GetWidth();
			if( bLeft )
				nDistStt = rSz.GetWidth();
		}
		else
		{
			fnSelBox = lcl_InsSelBox;
			fnOtherBox = lcl_InsOtherBox;
		}
	}
	else
	{
		fnSelBox = lcl_SetSelBoxWidth;
		fnOtherBox = lcl_SetOtherBoxWidth;
	}


	switch( eType & 0xff )
	{
	case nsTblChgWidthHeightType::WH_COL_RIGHT:
	case nsTblChgWidthHeightType::WH_COL_LEFT:
		if( TBLVAR_CHGABS == eTblChgMode )
		{
			if( bInsDel )
				bBigger = !bBigger;

			// erstmal testen, ob ueberhaupt Platz ist
			sal_Bool bChgLRSpace = sal_True;
			if( bBigger )
			{
                if( GetFrmFmt()->getIDocumentSettingAccess()->get(IDocumentSettingAccess::BROWSE_MODE) &&
					!rSz.GetWidthPercent() )
				{
					bRet = rSz.GetWidth() < USHRT_MAX - nRelDiff;
					bChgLRSpace = bLeft ? rLR.GetLeft() >= nAbsDiff
										: rLR.GetRight() >= nAbsDiff;
				}
				else
					bRet = bLeft ? rLR.GetLeft() >= nAbsDiff
								 : rLR.GetRight() >= nAbsDiff;

				if( !bRet && bInsDel &&
					// auf der anderen Seite Platz?
					( bLeft ? rLR.GetRight() >= nAbsDiff
							: rLR.GetLeft() >= nAbsDiff ))
				{
					bRet = sal_True; bLeft = !bLeft;
				}

				if( !bRet )
				{
					// dann sich selbst rekursiv aufrufen; nur mit
					// einem anderen Mode -> proprotional
					TblChgMode eOld = eTblChgMode;
					eTblChgMode = TBLFIX_CHGPROP;

					bRet = SetColWidth( rAktBox, eType, nAbsDiff, nRelDiff,
										ppUndo );
					eTblChgMode = eOld;
					return bRet;
				}
			}
			else
			{
				bRet = sal_True;
				for( n = 0; n < aLines.Count(); ++n )
				{
					aParam.LoopClear();
					if( !(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_True ))
					{
						bRet = sal_False;
						break;
					}
				}
			}

			if( bRet )
			{
				if( bInsDel )
				{
					pFndBox = ::lcl_SaveInsDelData( aParam, ppUndo,
													aTmpLst, nDistStt );
					if( aParam.bBigger && aParam.aBoxes.Count() ==
									aSortCntBoxes.Count() )
					{
						// dies gesamte Tabelle soll geloescht werden!!
						GetFrmFmt()->GetDoc()->DeleteRowCol( aParam.aBoxes );
						return sal_False;
					}

					if( ppUndo )
						*ppUndo = aParam.CreateUndo(
										aParam.bBigger ? UNDO_COL_DELETE
													   : UNDO_TABLE_INSCOL );
				}
				else if( ppUndo )
					*ppUndo = new SwUndoAttrTbl( *aParam.pTblNd, sal_True );

				long nFrmWidth = LONG_MAX;
				LockModify();
				SwFmtFrmSize aSz( rSz );
				SvxLRSpaceItem aLR( rLR );
				if( bBigger )
				{
					// falls die Tabelle keinen Platz zum Wachsen hat, dann
					// muessen wir welchen schaffen!
					if( aSz.GetWidth() + nRelDiff > USHRT_MAX )
					{
						// dann mal herunterbrechen auf USHRT_MAX / 2
						CR_SetBoxWidth aTmpPara( 0, aSz.GetWidth() / 2,
										0, aSz.GetWidth(), aSz.GetWidth(), aParam.pTblNd );
						for( sal_uInt16 nLn = 0; nLn < aLines.Count(); ++nLn )
							::lcl_AjustLines( aLines[ nLn ], aTmpPara );
						aSz.SetWidth( aSz.GetWidth() / 2 );
						aParam.nDiff = nRelDiff /= 2;
						aParam.nSide /= 2;
						aParam.nMaxSize /= 2;
					}

					if( bLeft )
						aLR.SetLeft( sal_uInt16( aLR.GetLeft() - nAbsDiff ) );
					else
						aLR.SetRight( sal_uInt16( aLR.GetRight() - nAbsDiff ) );
				}
				else if( bLeft )
					aLR.SetLeft( sal_uInt16( aLR.GetLeft() + nAbsDiff ) );
				else
					aLR.SetRight( sal_uInt16( aLR.GetRight() + nAbsDiff ) );

				if( bChgLRSpace )
                    GetFrmFmt()->SetFmtAttr( aLR );
				const SwFmtHoriOrient& rHOri = GetFrmFmt()->GetHoriOrient();
                if( text::HoriOrientation::FULL == rHOri.GetHoriOrient() ||
                    (text::HoriOrientation::LEFT == rHOri.GetHoriOrient() && aLR.GetLeft()) ||
                    (text::HoriOrientation::RIGHT == rHOri.GetHoriOrient() && aLR.GetRight()))
				{
					SwFmtHoriOrient aHOri( rHOri );
                    aHOri.SetHoriOrient( text::HoriOrientation::NONE );
                    GetFrmFmt()->SetFmtAttr( aHOri );

					// sollte die Tabelle noch auf relativen Werten
					// (USHRT_MAX) stehen dann muss es jetzt auf absolute
					// umgerechnet werden. Bug 61494
                    if( GetFrmFmt()->getIDocumentSettingAccess()->get(IDocumentSettingAccess::BROWSE_MODE) &&
                        !rSz.GetWidthPercent() )
					{
	                    SwTabFrm* pTabFrm = SwIterator<SwTabFrm,SwFmt>::FirstElement( *GetFrmFmt() );
						if( pTabFrm &&
							pTabFrm->Prt().Width() != rSz.GetWidth() )
						{
							nFrmWidth = pTabFrm->Prt().Width();
							if( bBigger )
								nFrmWidth += nAbsDiff;
							else
								nFrmWidth -= nAbsDiff;
						}
					}
				}

				if( bBigger )
					aSz.SetWidth( aSz.GetWidth() + nRelDiff );
				else
					aSz.SetWidth( aSz.GetWidth() - nRelDiff );

				if( rSz.GetWidthPercent() )
					aSz.SetWidthPercent( static_cast<sal_uInt8>(( aSz.GetWidth() * 100 ) /
						( aSz.GetWidth() + aLR.GetRight() + aLR.GetLeft())));

                GetFrmFmt()->SetFmtAttr( aSz );
				aParam.nTblWidth = sal_uInt16( aSz.GetWidth() );

				UnlockModify();

				for( n = aLines.Count(); n; )
				{
					--n;
					aParam.LoopClear();
					(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_False );
				}

				// sollte die Tabelle noch auf relativen Werten
				// (USHRT_MAX) stehen dann muss es jetzt auf absolute
				// umgerechnet werden. Bug 61494
				if( LONG_MAX != nFrmWidth )
				{
					SwFmtFrmSize aAbsSz( aSz );
                    aAbsSz.SetWidth( nFrmWidth );
                    GetFrmFmt()->SetFmtAttr( aAbsSz );
				}
			}
		}
		else if( bInsDel ||
				( bLeft ? nDist : Abs( rSz.GetWidth() - nDist ) > COLFUZZY ) )
		{
			bRet = sal_True;
			if( bLeft && TBLFIX_CHGABS == eTblChgMode && !bInsDel )
				aParam.bBigger = !bBigger;

			// erstmal testen, ob ueberhaupt Platz ist
			if( bInsDel )
			{
				if( aParam.bBigger )
				{
					for( n = 0; n < aLines.Count(); ++n )
					{
						aParam.LoopClear();
						if( !(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_True ))
						{
							bRet = sal_False;
							break;
						}
					}
				}
				else
				{
					if( 0 != ( bRet = bLeft ? nDist != 0
											: ( rSz.GetWidth() - nDist ) > COLFUZZY ) )
					{
						for( n = 0; n < aLines.Count(); ++n )
						{
							aParam.LoopClear();
							if( !(*fnOtherBox)( aLines[ n ], aParam, 0, sal_True ))
							{
								bRet = sal_False;
								break;
							}
						}
						if( bRet && !aParam.bAnyBoxFnd )
							bRet = sal_False;
					}

					if( !bRet && rAktBox.GetFrmFmt()->GetFrmSize().GetWidth()
						- nRelDiff > COLFUZZY +
							( 567 / 2 /* min. 0,5 cm Platz lassen*/) )
					{
						// dann den Platz von der akt. Zelle nehmen
						aParam.bSplittBox = sal_True;
						// aber das muss auch mal getestet werden!
						bRet = sal_True;

						for( n = 0; n < aLines.Count(); ++n )
						{
							aParam.LoopClear();
							if( !(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_True ))
							{
								bRet = sal_False;
								break;
							}
						}
					}
				}
			}
			else if( aParam.bBigger )
			{
				for( n = 0; n < aLines.Count(); ++n )
				{
					aParam.LoopClear();
					if( !(*fnOtherBox)( aLines[ n ], aParam, 0, sal_True ))
					{
						bRet = sal_False;
						break;
					}
				}
			}
			else
			{
				for( n = 0; n < aLines.Count(); ++n )
				{
					aParam.LoopClear();
					if( !(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_True ))
					{
						bRet = sal_False;
						break;
					}
				}
			}

			// wenn ja, dann setzen
			if( bRet )
			{
				CR_SetBoxWidth aParam1( aParam );
				if( bInsDel )
				{
					aParam1.bBigger = !aParam.bBigger;
					pFndBox = ::lcl_SaveInsDelData( aParam, ppUndo,
													aTmpLst, nDistStt );
					if( ppUndo )
						*ppUndo = aParam.CreateUndo(
										aParam.bBigger ? UNDO_TABLE_DELBOX
													   : UNDO_TABLE_INSCOL );
				}
				else if( ppUndo )
					*ppUndo = new SwUndoAttrTbl( *aParam.pTblNd, sal_True );

				if( bInsDel
					? ( TBLFIX_CHGABS == eTblChgMode ? bLeft : bLeft )
					: ( TBLFIX_CHGABS != eTblChgMode && bLeft ) )
				{
					for( n = aLines.Count(); n; )
					{
						--n;
						aParam.LoopClear();
						aParam1.LoopClear();
						(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_False );
						(*fnOtherBox)( aLines[ n ], aParam1, nDistStt, sal_False );
					}
				}
				else
					for( n = aLines.Count(); n; )
					{
						--n;
						aParam.LoopClear();
						aParam1.LoopClear();
						(*fnOtherBox)( aLines[ n ], aParam1, nDistStt, sal_False );
						(*fnSelBox)( aLines[ n ], aParam, nDistStt, sal_False );
					}
			}
		}
		break;

	case nsTblChgWidthHeightType::WH_CELL_RIGHT:
	case nsTblChgWidthHeightType::WH_CELL_LEFT:
		if( TBLVAR_CHGABS == eTblChgMode )
		{
			// dann sich selbst rekursiv aufrufen; nur mit
			// einem anderen Mode -> Nachbarn
			TblChgMode eOld = eTblChgMode;
			eTblChgMode = TBLFIX_CHGABS;

			bRet = SetColWidth( rAktBox, eType, nAbsDiff, nRelDiff,
								ppUndo );
			eTblChgMode = eOld;
			return bRet;
		}
		else if( bInsDel || ( bLeft ? nDist
									: (rSz.GetWidth() - nDist) > COLFUZZY ))
		{
			if( bLeft && TBLFIX_CHGABS == eTblChgMode && !bInsDel )
				aParam.bBigger = !bBigger;

			// erstmal testen, ob ueberhaupt Platz ist
			SwTableBox* pBox = &rAktBox;
			SwTableLine* pLine = rAktBox.GetUpper();
			while( pLine->GetUpper() )
			{
				sal_uInt16 nPos = pLine->GetTabBoxes().C40_GETPOS( SwTableBox, pBox );
				if( bLeft ? nPos : nPos + 1 != pLine->GetTabBoxes().Count() )
					break;

				pBox = pLine->GetUpper();
				pLine = pBox->GetUpper();
			}

			if( pLine->GetUpper() )
			{
				// dann muss die Distanz wieder korriegiert werden!
				aParam.nSide -= ::lcl_GetDistance( pLine->GetUpper(), sal_True );

				if( bLeft )
					aParam.nMaxSize = aParam.nSide;
				else
					aParam.nMaxSize = pLine->GetUpper()->GetFrmFmt()->
									GetFrmSize().GetWidth() - aParam.nSide;
			}

			// erstmal testen, ob ueberhaupt Platz ist
			if( bInsDel )
			{
				if( 0 != ( bRet = bLeft ? nDist != 0
								: ( rSz.GetWidth() - nDist ) > COLFUZZY ) &&
					!aParam.bBigger )
				{
                    bRet = (*fnOtherBox)( pLine, aParam, 0, sal_True );
					if( bRet && !aParam.bAnyBoxFnd )
						bRet = sal_False;
				}

				if( !bRet && !aParam.bBigger && rAktBox.GetFrmFmt()->
					GetFrmSize().GetWidth() - nRelDiff > COLFUZZY +
						( 567 / 2 /* min. 0,5 cm Platz lassen*/) )
				{
					// dann den Platz von der akt. Zelle nehmen
					aParam.bSplittBox = sal_True;
					bRet = sal_True;
				}
			}
			else
			{
				FN_lcl_SetBoxWidth fnTmp = aParam.bBigger ? fnOtherBox : fnSelBox;
				bRet = (*fnTmp)( pLine, aParam, nDistStt, sal_True );
			}

			// wenn ja, dann setzen
			if( bRet )
			{
				CR_SetBoxWidth aParam1( aParam );
				if( bInsDel )
				{
					aParam1.bBigger = !aParam.bBigger;
					pFndBox = ::lcl_SaveInsDelData( aParam, ppUndo, aTmpLst, nDistStt );
					if( ppUndo )
						*ppUndo = aParam.CreateUndo(
										aParam.bBigger ? UNDO_TABLE_DELBOX
													   : UNDO_TABLE_INSCOL );
				}
				else if( ppUndo )
					*ppUndo = new SwUndoAttrTbl( *aParam.pTblNd, sal_True );

				if( bInsDel
					? ( TBLFIX_CHGABS == eTblChgMode ? (bBigger && bLeft) : bLeft )
					: ( TBLFIX_CHGABS != eTblChgMode && bLeft ) )
				{
					(*fnSelBox)( pLine, aParam, nDistStt, sal_False );
					(*fnOtherBox)( pLine, aParam1, nDistStt, sal_False );
				}
				else
				{
					(*fnOtherBox)( pLine, aParam1, nDistStt, sal_False );
					(*fnSelBox)( pLine, aParam, nDistStt, sal_False );
				}
			}
		}
		break;

	}

	if( pFndBox )
	{
		// dann raeume die Struktur aller Lines auf
		GCLines();

		//Layout updaten
		if( !bBigger || pFndBox->AreLinesToRestore( *this ) )
			pFndBox->MakeFrms( *this );

		// TL_CHART2: it is currently unclear if sth has to be done here.
		// The function name hints that nothing needs to be done, on the other
		// hand there is a case where sth gets deleted.  :-(

		delete pFndBox;

		if( ppUndo && *ppUndo )
		{
			aParam.pUndo->SetColWidthParam( nBoxIdx, static_cast<sal_uInt16>(eTblChgMode), eType,
											nAbsDiff, nRelDiff );
			if( !aParam.bBigger )
				aParam.pUndo->SaveNewBoxes( *aParam.pTblNd, aTmpLst );
		}
	}

	if( bRet )
	{
		CHECKBOXWIDTH
        CHECKTABLELAYOUT
	}

	return bRet;
}
/*  */

_FndBox* lcl_SaveInsDelData( CR_SetLineHeight& rParam, SwUndo** ppUndo,
								SwTableSortBoxes& rTmpLst )
{
	// suche alle Boxen / Lines
	SwTable& rTbl = rParam.pTblNd->GetTable();

	ASSERT( rParam.aBoxes.Count(), "ohne Boxen ist nichts zu machen!" );

	// loeschen der gesamten Tabelle verhindern
	if( !rParam.bBigger && rParam.aBoxes.Count() ==
		rTbl.GetTabSortBoxes().Count() )
		return 0;

	_FndBox* pFndBox = new _FndBox( 0, 0 );
	if( !rParam.bBigger )
		pFndBox->SetTableLines( rParam.aBoxes, rTbl );
	else
	{
		_FndPara aPara( rParam.aBoxes, pFndBox );
		rTbl.GetTabLines().ForEach( &_FndLineCopyCol, &aPara );
		ASSERT( pFndBox->GetLines().Count(), "Wo sind die Boxen" );
		pFndBox->SetTableLines( rTbl );

		if( ppUndo )
			rTmpLst.Insert( &rTbl.GetTabSortBoxes(), 0, rTbl.GetTabSortBoxes().Count() );
	}

	//Lines fuer das Layout-Update heraussuchen.
	pFndBox->DelFrms( rTbl );

	// TL_CHART2: it is currently unclear if sth has to be done here.

	return pFndBox;
}

void SetLineHeight( SwTableLine& rLine, SwTwips nOldHeight, SwTwips nNewHeight,
					sal_Bool bMinSize )
{
	SwLayoutFrm* pLineFrm = GetRowFrm( rLine );
	ASSERT( pLineFrm, "wo ist der Frm von der SwTableLine?" );

	SwFrmFmt* pFmt = rLine.ClaimFrmFmt();

	SwTwips nMyNewH, nMyOldH = pLineFrm->Frm().Height();
	if( !nOldHeight )						// die BaseLine und absolut
		nMyNewH = nMyOldH + nNewHeight;
	else
	{
		// moeglichst genau rechnen
		Fraction aTmp( nMyOldH );
		aTmp *= Fraction( nNewHeight, nOldHeight );
		aTmp += Fraction( 1, 2 );		// ggfs. aufrunden
		nMyNewH = aTmp;
	}

	SwFrmSize eSize = ATT_MIN_SIZE;
	if( !bMinSize &&
		( nMyOldH - nMyNewH ) > ( CalcRowRstHeight( pLineFrm ) + ROWFUZZY ))
		eSize = ATT_FIX_SIZE;

    pFmt->SetFmtAttr( SwFmtFrmSize( eSize, 0, nMyNewH ) );

	// erst alle inneren anpassen
	SwTableBoxes& rBoxes = rLine.GetTabBoxes();
	for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
	{
		SwTableBox& rBox = *rBoxes[ n ];
		for( sal_uInt16 i = 0; i < rBox.GetTabLines().Count(); ++i )
			SetLineHeight( *rBox.GetTabLines()[ i ], nMyOldH, nMyNewH, bMinSize );
	}
}

sal_Bool lcl_SetSelLineHeight( SwTableLine* pLine, CR_SetLineHeight& rParam,
							 SwTwips nDist, sal_Bool bCheck )
{
	sal_Bool bRet = sal_True;
	if( !bCheck )
	{
		// Zeilenhoehe einstellen
		SetLineHeight( *pLine, 0, rParam.bBigger ? nDist : -nDist,
						rParam.bBigger );
	}
	else if( !rParam.bBigger )
	{
		// anhand der alten Size die neue relative errechnen
		SwLayoutFrm* pLineFrm = GetRowFrm( *pLine );
		ASSERT( pLineFrm, "wo ist der Frm von der SwTableLine?" );
		SwTwips nRstHeight = CalcRowRstHeight( pLineFrm );
		if( (nRstHeight + ROWFUZZY) < nDist )
			bRet = sal_False;
	}
	return bRet;
}

sal_Bool lcl_SetOtherLineHeight( SwTableLine* pLine, CR_SetLineHeight& rParam,
								SwTwips nDist, sal_Bool bCheck )
{
	sal_Bool bRet = sal_True;
	if( bCheck )
	{
		if( rParam.bBigger )
		{
			// anhand der alten Size die neue relative errechnen
			SwLayoutFrm* pLineFrm = GetRowFrm( *pLine );
			ASSERT( pLineFrm, "wo ist der Frm von der SwTableLine?" );

			if( TBLFIX_CHGPROP == rParam.nMode )
			{
				nDist *= pLineFrm->Frm().Height();
				nDist /= rParam.nMaxHeight;
			}
			bRet = nDist <= CalcRowRstHeight( pLineFrm );
		}
	}
	else
	{
		// Zeilenhoehe einstellen
		// pLine ist die nachfolgende / vorhergehende -> also anpassen
		if( TBLFIX_CHGPROP == rParam.nMode )
		{
			SwLayoutFrm* pLineFrm = GetRowFrm( *pLine );
			ASSERT( pLineFrm, "wo ist der Frm von der SwTableLine?" );

			// aus der alten Size die neue relative errechnen
			// Wird die selektierte Box groesser ueber den MaxSpace anpassen,
			// sonst ueber die MaxHeight
			if( 1 /*!rParam.bBigger*/ )
			{
				nDist *= pLineFrm->Frm().Height();
				nDist /= rParam.nMaxHeight;
			}
			else
			{
				// aus der alten Size die neue relative errechnen
				nDist *= CalcRowRstHeight( pLineFrm );
				nDist /= rParam.nMaxSpace;
			}
		}
		SetLineHeight( *pLine, 0, rParam.bBigger ? -nDist : nDist,
						!rParam.bBigger );
	}
	return bRet;
}

sal_Bool lcl_InsDelSelLine( SwTableLine* pLine, CR_SetLineHeight& rParam,
							SwTwips nDist, sal_Bool bCheck )
{
	sal_Bool bRet = sal_True;
	if( !bCheck )
	{
		SwTableBoxes& rBoxes = pLine->GetTabBoxes();
		SwDoc* pDoc = pLine->GetFrmFmt()->GetDoc();
		if( !rParam.bBigger )
		{
			sal_uInt16 n;

			for( n = rBoxes.Count(); n; )
				::lcl_SaveUpperLowerBorder( rParam.pTblNd->GetTable(),
													*rBoxes[ --n ],
													rParam.aShareFmts );
			for( n = rBoxes.Count(); n; )
				::_DeleteBox( rParam.pTblNd->GetTable(),
									rBoxes[ --n ], rParam.pUndo, sal_False,
									sal_False, &rParam.aShareFmts );
		}
		else
		{
			// Zeile einfuegen
			SwTableLine* pNewLine = new SwTableLine( (SwTableLineFmt*)pLine->GetFrmFmt(),
										rBoxes.Count(), pLine->GetUpper() );
			SwTableLines* pLines;
			if( pLine->GetUpper() )
				pLines = &pLine->GetUpper()->GetTabLines();
			else
				pLines = &rParam.pTblNd->GetTable().GetTabLines();
			sal_uInt16 nPos = pLines->C40_GETPOS( SwTableLine, pLine );
			if( !rParam.bTop )
				++nPos;
			pLines->C40_INSERT( SwTableLine, pNewLine, nPos );

			SwFrmFmt* pNewFmt = pNewLine->ClaimFrmFmt();
            pNewFmt->SetFmtAttr( SwFmtFrmSize( ATT_MIN_SIZE, 0, nDist ) );

			// und noch mal die Anzahl Boxen erzeugen
			SwTableBoxes& rNewBoxes = pNewLine->GetTabBoxes();
			for( sal_uInt16 n = 0; n < rBoxes.Count(); ++n )
			{
				SwTwips nWidth = 0;
				SwTableBox* pOld = rBoxes[ n ];
				if( !pOld->GetSttNd() )
				{
					// keine normale "Content"-Box also auf die 1. naechste
					// Box zurueckfallen
					nWidth = pOld->GetFrmFmt()->GetFrmSize().GetWidth();
					while( !pOld->GetSttNd() )
						pOld = pOld->GetTabLines()[ 0 ]->GetTabBoxes()[ 0 ];
				}
				::_InsTblBox( pDoc, rParam.pTblNd, pNewLine,
									(SwTableBoxFmt*)pOld->GetFrmFmt(), pOld, n );

				// Sonderbehandlung fuer Umrandung die Obere muss
				// entfernt werden
				const SvxBoxItem& rBoxItem = pOld->GetFrmFmt()->GetBox();
				if( rBoxItem.GetTop() )
				{
					SvxBoxItem aTmp( rBoxItem );
					aTmp.SetLine( 0, BOX_LINE_TOP );
                    rParam.aShareFmts.SetAttr( rParam.bTop
												? *pOld
												: *rNewBoxes[ n ], aTmp );
				}

				if( nWidth )
                    rParam.aShareFmts.SetAttr( *rNewBoxes[ n ],
								SwFmtFrmSize( ATT_FIX_SIZE, nWidth, 0 ) );
			}
		}
	}
	else
	{
		// Boxen einsammeln!
		SwTableBoxes& rBoxes = pLine->GetTabBoxes();
		for( sal_uInt16 n = rBoxes.Count(); n; )
		{
			SwTableBox* pBox = rBoxes[ --n ];
			if( pBox->GetFrmFmt()->GetProtect().IsCntntProtected() )
				return sal_False;

			if( pBox->GetSttNd() )
				rParam.aBoxes.Insert( pBox );
			else
			{
				for( sal_uInt16 i = pBox->GetTabLines().Count(); i; )
					lcl_InsDelSelLine( pBox->GetTabLines()[ --i ],
										rParam, 0, sal_True );
			}
		}
	}
	return bRet;
}

sal_Bool SwTable::SetRowHeight( SwTableBox& rAktBox, sal_uInt16 eType,
						SwTwips nAbsDiff, SwTwips nRelDiff,SwUndo** ppUndo )
{
	SwTableLine* pLine = rAktBox.GetUpper();

	SwTableLine* pBaseLine = pLine;
	while( pBaseLine->GetUpper() )
		pBaseLine = pBaseLine->GetUpper()->GetUpper();

	_FndBox* pFndBox = 0;					// fuers Einfuegen/Loeschen
	SwTableSortBoxes aTmpLst( 0, 5 );		// fuers Undo
	sal_Bool bBigger,
		bRet = sal_False,
		bTop = nsTblChgWidthHeightType::WH_ROW_TOP == ( eType & 0xff ) ||
				nsTblChgWidthHeightType::WH_CELL_TOP == ( eType & 0xff ),
		bInsDel = 0 != (eType & nsTblChgWidthHeightType::WH_FLAG_INSDEL );
	sal_uInt16 n, nBaseLinePos = GetTabLines().C40_GETPOS( SwTableLine, pBaseLine );
	sal_uLong nBoxIdx = rAktBox.GetSttIdx();

	CR_SetLineHeight aParam( eType,
						(SwTableNode*)rAktBox.GetSttNd()->FindTableNode() );
	bBigger = aParam.bBigger;

	FN_lcl_SetLineHeight fnSelLine, fnOtherLine = lcl_SetOtherLineHeight;
	if( bInsDel )
		fnSelLine = lcl_InsDelSelLine;
	else
		fnSelLine = lcl_SetSelLineHeight;

	SwTableLines* pLines = &aLines;

	// wie kommt man an die Hoehen heran?
	switch( eType & 0xff )
	{
	case nsTblChgWidthHeightType::WH_CELL_TOP:
	case nsTblChgWidthHeightType::WH_CELL_BOTTOM:
		if( pLine == pBaseLine )
			break;	// dann geht es nicht!

		// ist eine verschachtelte Line (Box!)
		pLines = &pLine->GetUpper()->GetTabLines();
		nBaseLinePos = pLines->C40_GETPOS( SwTableLine, pLine );
		pBaseLine = pLine;
		// kein break!

	case nsTblChgWidthHeightType::WH_ROW_TOP:
	case nsTblChgWidthHeightType::WH_ROW_BOTTOM:
		{
			if( bInsDel && !bBigger )		// um wieviel wird es Hoeher?
			{
				nAbsDiff = GetRowFrm( *pBaseLine )->Frm().Height();
			}

			if( TBLVAR_CHGABS == eTblChgMode )
			{
				// erstmal testen, ob ueberhaupt Platz ist
				if( bBigger )
				{
					bRet = sal_True;
// was ist mit Top, was ist mit Tabelle im Rahmen oder in Kopf-/Fusszeile
// mit fester Hoehe ??
					if( !bRet )
					{
						// dann sich selbst rekursiv aufrufen; nur mit
						// einem anderen Mode -> proprotional
						TblChgMode eOld = eTblChgMode;
						eTblChgMode = TBLFIX_CHGPROP;

						bRet = SetRowHeight( rAktBox, eType, nAbsDiff,
											nRelDiff, ppUndo );

						eTblChgMode = eOld;
						return bRet;
					}
				}
				else
					bRet = (*fnSelLine)( (*pLines)[ nBaseLinePos ], aParam,
										nAbsDiff, sal_True );

				if( bRet )
				{
					if( bInsDel )
					{
						if( !aParam.aBoxes.Count() )
							::lcl_InsDelSelLine( (*pLines)[ nBaseLinePos ],
													aParam, 0, sal_True );

						pFndBox = ::lcl_SaveInsDelData( aParam, ppUndo, aTmpLst );

                        // #110525# delete complete table when last row is
                        // deleted
                        if( !bBigger &&
                            aParam.aBoxes.Count() == aSortCntBoxes.Count() )
                        {
                            GetFrmFmt()->GetDoc()->DeleteRowCol( aParam.aBoxes );
                            return sal_False;
                        }


						if( ppUndo )
                            *ppUndo = aParam.CreateUndo(
										bBigger ? UNDO_TABLE_INSROW
                                                : UNDO_ROW_DELETE );
					}
					else if( ppUndo )
						*ppUndo = new SwUndoAttrTbl( *aParam.pTblNd, sal_True );

					(*fnSelLine)( (*pLines)[ nBaseLinePos ], aParam,
									nAbsDiff, sal_False );
				}
			}
			else
			{
				bRet = sal_True;
				sal_uInt16 nStt, nEnd;
				if( bTop )
					nStt = 0, nEnd = nBaseLinePos;
				else
					nStt = nBaseLinePos + 1, nEnd = pLines->Count();

				// die akt. Hoehe der Lines besorgen
				if( TBLFIX_CHGPROP == eTblChgMode )
				{
					for( n = nStt; n < nEnd; ++n )
					{
						SwLayoutFrm* pLineFrm = GetRowFrm( *(*pLines)[ n ] );
						ASSERT( pLineFrm, "wo ist der Frm von der SwTableLine?" );
						aParam.nMaxSpace += CalcRowRstHeight( pLineFrm );
						aParam.nMaxHeight += pLineFrm->Frm().Height();
					}
					if( bBigger && aParam.nMaxSpace < nAbsDiff )
						bRet = sal_False;
				}
				else
				{
					if( bTop ? nEnd : nStt < nEnd  )
					{
						if( bTop )
							nStt = nEnd - 1;
						else
							nEnd = nStt + 1;
					}
					else
						bRet = sal_False;
				}

				if( bRet )
				{
					if( bBigger )
					{
						for( n = nStt; n < nEnd; ++n )
						{
							if( !(*fnOtherLine)( (*pLines)[ n ], aParam,
													nAbsDiff, sal_True ))
							{
								bRet = sal_False;
								break;
							}
						}
					}
					else
						bRet = (*fnSelLine)( (*pLines)[ nBaseLinePos ], aParam,
												nAbsDiff, sal_True );
				}

				if( bRet )
				{
					// dann mal anpassen
					if( bInsDel )
					{
						if( !aParam.aBoxes.Count() )
							::lcl_InsDelSelLine( (*pLines)[ nBaseLinePos ],
													aParam, 0, sal_True );
						pFndBox = ::lcl_SaveInsDelData( aParam, ppUndo, aTmpLst );
						if( ppUndo )
                            *ppUndo = aParam.CreateUndo(
										bBigger ? UNDO_TABLE_INSROW
                                                : UNDO_ROW_DELETE );
					}
					else if( ppUndo )
						*ppUndo = new SwUndoAttrTbl( *aParam.pTblNd, sal_True );

					CR_SetLineHeight aParam1( aParam );
					if( TBLFIX_CHGPROP == eTblChgMode && !bBigger &&
						!aParam.nMaxSpace )
					{
						// dann muss der gesamte Platz auf alle Lines
						// gleichmaessig verteilt werden. Dafuer wird die
						// Anzahl benoetigt
						aParam1.nLines = nEnd - nStt;
					}

					if( bTop )
					{
						(*fnSelLine)( (*pLines)[ nBaseLinePos ], aParam,
										nAbsDiff, sal_False );
						for( n = nStt; n < nEnd; ++n )
							(*fnOtherLine)( (*pLines)[ n ], aParam1,
											nAbsDiff, sal_False );
					}
					else
					{
						for( n = nStt; n < nEnd; ++n )
							(*fnOtherLine)( (*pLines)[ n ], aParam1,
											nAbsDiff, sal_False );
						(*fnSelLine)( (*pLines)[ nBaseLinePos ], aParam,
										nAbsDiff, sal_False );
					}
				}
				else
				{
					// dann sich selbst rekursiv aufrufen; nur mit
					// einem anderen Mode -> proprotional
					TblChgMode eOld = eTblChgMode;
					eTblChgMode = TBLVAR_CHGABS;

					bRet = SetRowHeight( rAktBox, eType, nAbsDiff,
										nRelDiff, ppUndo );

					eTblChgMode = eOld;
					pFndBox = 0;
				}
			}
		}
		break;
	}

	if( pFndBox )
	{
		// dann raeume die Struktur aller Lines auf
		GCLines();

		//Layout updaten
		if( bBigger || pFndBox->AreLinesToRestore( *this ) )
			pFndBox->MakeFrms( *this );

		// TL_CHART2: it is currently unclear if sth has to be done here.

		delete pFndBox;

		if( ppUndo && *ppUndo )
		{
			aParam.pUndo->SetColWidthParam( nBoxIdx, static_cast<sal_uInt16>(eTblChgMode), eType,
											nAbsDiff, nRelDiff );
			if( bBigger )
				aParam.pUndo->SaveNewBoxes( *aParam.pTblNd, aTmpLst );
		}
	}

    CHECKTABLELAYOUT

	return bRet;
}

/*  */

SwFrmFmt* SwShareBoxFmt::GetFormat( long nWidth ) const
{
	SwFrmFmt *pRet = 0, *pTmp;
	for( sal_uInt16 n = aNewFmts.Count(); n; )
		if( ( pTmp = (SwFrmFmt*)aNewFmts[ --n ])->GetFrmSize().GetWidth()
				== nWidth )
		{
			pRet = pTmp;
			break;
		}
	return pRet;
}

SwFrmFmt* SwShareBoxFmt::GetFormat( const SfxPoolItem& rItem ) const
{
	const SfxPoolItem* pItem;
	sal_uInt16 nWhich = rItem.Which();
	SwFrmFmt *pRet = 0, *pTmp;
    const SfxPoolItem& rFrmSz = pOldFmt->GetFmtAttr( RES_FRM_SIZE, sal_False );
	for( sal_uInt16 n = aNewFmts.Count(); n; )
		if( SFX_ITEM_SET == ( pTmp = (SwFrmFmt*)aNewFmts[ --n ])->
			GetItemState( nWhich, sal_False, &pItem ) && *pItem == rItem &&
            pTmp->GetFmtAttr( RES_FRM_SIZE, sal_False ) == rFrmSz )
		{
			pRet = pTmp;
			break;
		}
	return pRet;
}

void SwShareBoxFmt::AddFormat( const SwFrmFmt& rNew )
{
	void* pFmt = (void*)&rNew;
	aNewFmts.Insert( pFmt, aNewFmts.Count() );
}

sal_Bool SwShareBoxFmt::RemoveFormat( const SwFrmFmt& rFmt )
{
	// returnt sal_True, wenn geloescht werden kann
	if( pOldFmt == &rFmt )
		return sal_True;

	void* p = (void*)&rFmt;
	sal_uInt16 nFnd = aNewFmts.GetPos( p );
	if( USHRT_MAX != nFnd )
		aNewFmts.Remove( nFnd );
	return 0 == aNewFmts.Count();
}

SwShareBoxFmts::~SwShareBoxFmts()
{
}

SwFrmFmt* SwShareBoxFmts::GetFormat( const SwFrmFmt& rFmt, long nWidth ) const
{
	sal_uInt16 nPos;
	return Seek_Entry( rFmt, &nPos )
					? aShareArr[ nPos ]->GetFormat( nWidth )
					: 0;
}
SwFrmFmt* SwShareBoxFmts::GetFormat( const SwFrmFmt& rFmt,
									 const SfxPoolItem& rItem ) const
{
	sal_uInt16 nPos;
	return Seek_Entry( rFmt, &nPos )
					? aShareArr[ nPos ]->GetFormat( rItem )
					: 0;
}

void SwShareBoxFmts::AddFormat( const SwFrmFmt& rOld, const SwFrmFmt& rNew )
{
	// wenn das Format nicht geshared ist, braucht es auch nicht in die
	// Liste aufgenommen werden. Denn es gibt keinen 2. der es sucht.
//leider werden auch die CellFrms gefunden
//	if( !rOld.IsLastDepend() )
	{
		sal_uInt16 nPos;
		SwShareBoxFmt* pEntry;
		if( !Seek_Entry( rOld, &nPos ))
		{
			pEntry = new SwShareBoxFmt( rOld );
			aShareArr.C40_INSERT( SwShareBoxFmt, pEntry, nPos );
		}
		else
			pEntry = aShareArr[ nPos ];

		pEntry->AddFormat( rNew );
	}
}
void SwShareBoxFmts::ChangeFrmFmt( SwTableBox* pBox, SwTableLine* pLn,
									SwFrmFmt& rFmt )
{
	SwClient aCl;
	SwFrmFmt* pOld = 0;
	if( pBox )
	{
		pOld = pBox->GetFrmFmt();
		pOld->Add( &aCl );
		pBox->ChgFrmFmt( (SwTableBoxFmt*)&rFmt );
	}
	else if( pLn )
	{
		pOld = pLn->GetFrmFmt();
		pOld->Add( &aCl );
		pLn->ChgFrmFmt( (SwTableLineFmt*)&rFmt );
	}
	if( pOld && pOld->IsLastDepend() )
	{
		RemoveFormat( *pOld );
		delete pOld;
	}
}

void SwShareBoxFmts::SetSize( SwTableBox& rBox, const SwFmtFrmSize& rSz )
{
	SwFrmFmt *pBoxFmt = rBox.GetFrmFmt(),
			 *pRet = GetFormat( *pBoxFmt, rSz.GetWidth() );
	if( pRet )
		ChangeFrmFmt( &rBox, 0, *pRet );
	else
	{
		pRet = rBox.ClaimFrmFmt();
        pRet->SetFmtAttr( rSz );
		AddFormat( *pBoxFmt, *pRet );
	}
}

void SwShareBoxFmts::SetAttr( SwTableBox& rBox, const SfxPoolItem& rItem )
{
	SwFrmFmt *pBoxFmt = rBox.GetFrmFmt(),
			 *pRet = GetFormat( *pBoxFmt, rItem );
	if( pRet )
		ChangeFrmFmt( &rBox, 0, *pRet );
	else
	{
		pRet = rBox.ClaimFrmFmt();
        pRet->SetFmtAttr( rItem );
		AddFormat( *pBoxFmt, *pRet );
	}
}

void SwShareBoxFmts::SetAttr( SwTableLine& rLine, const SfxPoolItem& rItem )
{
	SwFrmFmt *pLineFmt = rLine.GetFrmFmt(),
			 *pRet = GetFormat( *pLineFmt, rItem );
	if( pRet )
		ChangeFrmFmt( 0, &rLine, *pRet );
	else
	{
		pRet = rLine.ClaimFrmFmt();
        pRet->SetFmtAttr( rItem );
		AddFormat( *pLineFmt, *pRet );
	}
}

void SwShareBoxFmts::RemoveFormat( const SwFrmFmt& rFmt )
{
	for( sal_uInt16 i = aShareArr.Count(); i; )
		if( aShareArr[ --i ]->RemoveFormat( rFmt ))
			aShareArr.DeleteAndDestroy( i );
}

sal_Bool SwShareBoxFmts::Seek_Entry( const SwFrmFmt& rFmt, sal_uInt16* pPos ) const
{
	sal_uLong nIdx = (sal_uLong)&rFmt;
	sal_uInt16 nO = aShareArr.Count(), nM, nU = 0;
	if( nO > 0 )
	{
		nO--;
		while( nU <= nO )
		{
			nM = nU + ( nO - nU ) / 2;
			sal_uLong nFmt = (sal_uLong)&aShareArr[ nM ]->GetOldFormat();
			if( nFmt == nIdx )
			{
				if( pPos )
					*pPos = nM;
				return sal_True;
			}
			else if( nFmt < nIdx )
				nU = nM + 1;
			else if( nM == 0 )
			{
				if( pPos )
					*pPos = nU;
				return sal_False;
			}
			else
				nO = nM - 1;
		}
	}
	if( pPos )
		*pPos = nU;
	return sal_False;
}