filter/xml/xmlimp.cxx

/**************************************************************
 *
 * Licensed to the Apache Software Foundation (ASF) under one
 * or more contributor license agreements.  See the NOTICE file
 * distributed with this work for additional information
 * regarding copyright ownership.  The ASF licenses this file
 * to you under the Apache License, Version 2.0 (the
 * "License"); you may not use this file except in compliance
 * with the License.  You may obtain a copy of the License at
 *
 *   http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing,
 * software distributed under the License is distributed on an
 * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
 * KIND, either express or implied.  See the License for the
 * specific language governing permissions and limitations
 * under the License.
 *
 *************************************************************/


// MARKER(update_precomp.py): autogen include statement, do not remove
#include "precompiled_sw.hxx"

#include <com/sun/star/text/XTextDocument.hpp>
#include <com/sun/star/text/XTextRange.hpp>
#include <com/sun/star/drawing/XDrawPage.hpp>
#include <com/sun/star/drawing/XDrawPageSupplier.hpp>
#include <com/sun/star/container/XIndexAccess.hpp>
#include <xmloff/xmlnmspe.hxx>
#include <xmloff/xmltkmap.hxx>
#include <xmloff/xmlictxt.hxx>
#include <xmloff/txtimp.hxx>
#include <xmloff/nmspmap.hxx>
#include <xmloff/XMLTextShapeImportHelper.hxx>
#include <xmloff/XMLFontStylesContext.hxx>
#include <xmloff/ProgressBarHelper.hxx>
#include <com/sun/star/i18n/XForbiddenCharacters.hpp>
#include <com/sun/star/document/PrinterIndependentLayout.hpp>
#include <doc.hxx>
#include <TextCursorHelper.hxx>
#include <unotext.hxx>
#include <unotextrange.hxx>
#include "unocrsr.hxx"
#include <poolfmt.hxx>
#include <ndtxt.hxx>
#include <editsh.hxx>
#include "xmlimp.hxx"
#include <xmloff/DocumentSettingsContext.hxx>
#include <docsh.hxx>
#include <editeng/unolingu.hxx>
#include <svx/svdmodel.hxx>
#include <svx/xmlgrhlp.hxx>
#include <svx/xmleohlp.hxx>
#include <sfx2/printer.hxx>
#include <ForbiddenCharactersEnum.hxx>
#include <xmloff/xmluconv.hxx>
#include <unotools/saveopt.hxx>
#include <tools/diagnose_ex.h>
#include <hash_set>
#include <stringhash.hxx>

// for locking SolarMutex: svapp + mutex
#include <vcl/svapp.hxx>
#include <vos/mutex.hxx>
#include <unotxdoc.hxx>    // for initXForms()

#include <xmloff/xmlmetai.hxx>
#include <xmloff/xformsimport.hxx>

using ::rtl::OUString;

using namespace ::com::sun::star;
using namespace ::com::sun::star::uno;
using namespace ::com::sun::star::text;
using namespace ::com::sun::star::lang;
using namespace ::com::sun::star::beans;
using namespace ::com::sun::star::container;
using namespace ::com::sun::star::i18n;
using namespace ::com::sun::star::drawing;
using namespace ::com::sun::star::xforms;
using namespace ::xmloff::token;
using namespace ::std;

struct OUStringEquals
{
    sal_Bool operator()( const rtl::OUString &r1,
                         const rtl::OUString &r2) const
    {
        return r1 == r2;
    }
};

//----------------------------------------------------------------------------

enum SwXMLDocTokens
{
    XML_TOK_DOC_FONTDECLS,
    XML_TOK_DOC_STYLES,
    XML_TOK_DOC_AUTOSTYLES,
    XML_TOK_DOC_MASTERSTYLES,
    XML_TOK_DOC_META,
    XML_TOK_DOC_BODY,
    XML_TOK_DOC_SCRIPT,
    XML_TOK_DOC_SETTINGS,
    XML_TOK_DOC_XFORMS,
    XML_TOK_OFFICE_END=XML_TOK_UNKNOWN
};

static __FAR_DATA SvXMLTokenMapEntry aDocTokenMap[] =
{
    { XML_NAMESPACE_OFFICE, XML_FONT_FACE_DECLS,     XML_TOK_DOC_FONTDECLS  },
    { XML_NAMESPACE_OFFICE, XML_STYLES,         XML_TOK_DOC_STYLES      },
    { XML_NAMESPACE_OFFICE, XML_AUTOMATIC_STYLES, XML_TOK_DOC_AUTOSTYLES    },
    { XML_NAMESPACE_OFFICE, XML_MASTER_STYLES,   XML_TOK_DOC_MASTERSTYLES   },
    { XML_NAMESPACE_OFFICE, XML_META,           XML_TOK_DOC_META        },
    { XML_NAMESPACE_OFFICE, XML_BODY,           XML_TOK_DOC_BODY        },
    { XML_NAMESPACE_OFFICE, XML_SCRIPTS,        XML_TOK_DOC_SCRIPT      },
    { XML_NAMESPACE_OFFICE, XML_SETTINGS,       XML_TOK_DOC_SETTINGS    },
    { XML_NAMESPACE_XFORMS, XML_MODEL,          XML_TOK_DOC_XFORMS      },
    XML_TOKEN_MAP_END
};

// ----------------------------------------------------------------------------

class SwXMLBodyContext_Impl : public SvXMLImportContext
{
    const SwXMLImport& GetSwImport() const
        { return (const SwXMLImport&)GetImport(); }
    SwXMLImport& GetSwImport() { return (SwXMLImport&)GetImport(); }

public:

    SwXMLBodyContext_Impl( SwXMLImport& rImport, sal_uInt16 nPrfx,
                const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & xAttrList );
    virtual ~SwXMLBodyContext_Impl();

    TYPEINFO();

    virtual SvXMLImportContext *CreateChildContext( sal_uInt16 nPrefix,
                const OUString& rLocalName,
                const Reference< xml::sax::XAttributeList > & xAttrList );
};

SwXMLBodyContext_Impl::SwXMLBodyContext_Impl( SwXMLImport& rImport,
                sal_uInt16 nPrfx, const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & /*xAttrList*/ ) :
    SvXMLImportContext( rImport, nPrfx, rLName )
{
}

SwXMLBodyContext_Impl::~SwXMLBodyContext_Impl()
{
}

TYPEINIT1( SwXMLBodyContext_Impl, SvXMLImportContext );

SvXMLImportContext *SwXMLBodyContext_Impl::CreateChildContext(
        sal_uInt16 /*nPrefix*/,
        const OUString& rLocalName,
        const Reference< xml::sax::XAttributeList > & /*xAttrList*/ )
{
    return GetSwImport().CreateBodyContentContext( rLocalName );
}

// ----------------------------------------------------------------------------

// --> OD 2006-10-11 #i69629#
// enhance class <SwXMLDocContext_Impl> in order to be able to create subclasses
// NB: virtually inherit so we can multiply inherit properly
//     in SwXMLOfficeDocContext_Impl
class SwXMLDocContext_Impl : public virtual SvXMLImportContext
{
// --> OD 2006-10-11 #i69629#
protected:
// <--
    const SwXMLImport& GetSwImport() const
        { return (const SwXMLImport&)GetImport(); }
    SwXMLImport& GetSwImport() { return (SwXMLImport&)GetImport(); }

public:

    SwXMLDocContext_Impl( SwXMLImport& rImport, sal_uInt16 nPrfx,
                const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & xAttrList );
    virtual ~SwXMLDocContext_Impl();

    TYPEINFO();

    virtual SvXMLImportContext *CreateChildContext( sal_uInt16 nPrefix,
                const OUString& rLocalName,
                const Reference< xml::sax::XAttributeList > & xAttrList );
};

SwXMLDocContext_Impl::SwXMLDocContext_Impl( SwXMLImport& rImport,
                sal_uInt16 nPrfx, const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & /*xAttrList*/ ) :
    SvXMLImportContext( rImport, nPrfx, rLName )
{
}

SwXMLDocContext_Impl::~SwXMLDocContext_Impl()
{
}

TYPEINIT1( SwXMLDocContext_Impl, SvXMLImportContext );

SvXMLImportContext *SwXMLDocContext_Impl::CreateChildContext(
        sal_uInt16 nPrefix,
        const OUString& rLocalName,
        const Reference< xml::sax::XAttributeList > & xAttrList )
{
    SvXMLImportContext *pContext = 0;

    const SvXMLTokenMap& rTokenMap = GetSwImport().GetDocElemTokenMap();
    switch( rTokenMap.Get( nPrefix, rLocalName ) )
    {
    case XML_TOK_DOC_FONTDECLS:
        pContext = GetSwImport().CreateFontDeclsContext( rLocalName,
                                                             xAttrList );
        break;
    case XML_TOK_DOC_STYLES:
        GetSwImport().GetProgressBarHelper()->Increment( PROGRESS_BAR_STEP );
        pContext = GetSwImport().CreateStylesContext( rLocalName, xAttrList,
                                                      sal_False );
        break;
    case XML_TOK_DOC_AUTOSTYLES:
        // don't use the autostyles from the styles-document for the progress
        if ( ! IsXMLToken( GetLocalName(), XML_DOCUMENT_STYLES ) )
            GetSwImport().GetProgressBarHelper()->Increment
                ( PROGRESS_BAR_STEP );
        pContext = GetSwImport().CreateStylesContext( rLocalName, xAttrList,
                                                      sal_True );
        break;
//  case XML_TOK_DOC_USESTYLES:
//      pContext = GetSwImport().CreateUseStylesContext( rLocalName,
//                                                       xAttrList );
//      break;
    case XML_TOK_DOC_MASTERSTYLES:
        pContext = GetSwImport().CreateMasterStylesContext( rLocalName,
                                                            xAttrList );
        break;
    case XML_TOK_DOC_META:
        DBG_WARNING("XML_TOK_DOC_META: should not have come here, maybe document is invalid?");
        break;
    case XML_TOK_DOC_SCRIPT:
        pContext = GetSwImport().CreateScriptContext( rLocalName );
        break;
    case XML_TOK_DOC_BODY:
        GetSwImport().GetProgressBarHelper()->Increment( PROGRESS_BAR_STEP );
        pContext = new SwXMLBodyContext_Impl( GetSwImport(), nPrefix,
                                              rLocalName, xAttrList );
        break;
    case XML_TOK_DOC_SETTINGS:
        pContext = new XMLDocumentSettingsContext( GetImport(), nPrefix, rLocalName, xAttrList );
        break;
    case XML_TOK_DOC_XFORMS:
        pContext = createXFormsModelContext(GetImport(), nPrefix, rLocalName);
        break;
    }

    if( !pContext )
        pContext = new SvXMLImportContext( GetImport(), nPrefix, rLocalName );


    return pContext;
}

// --> OD 2006-10-11 #i69629#
// new subclass <SwXMLOfficeDocContext_Impl> of class <SwXMLDocContext_Impl>
class SwXMLOfficeDocContext_Impl :
         public SwXMLDocContext_Impl, public SvXMLMetaDocumentContext
{
public:

    SwXMLOfficeDocContext_Impl( SwXMLImport& rImport,
                sal_uInt16 nPrfx,
                const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & xAttrList,
                const Reference< document::XDocumentProperties >& xDocProps,
                const Reference< xml::sax::XDocumentHandler >& xDocBuilder);
    virtual ~SwXMLOfficeDocContext_Impl();

    TYPEINFO();

    virtual SvXMLImportContext *CreateChildContext(
                sal_uInt16 nPrefix,
                const OUString& rLocalName,
                const Reference< xml::sax::XAttributeList > & xAttrList );
};

SwXMLOfficeDocContext_Impl::SwXMLOfficeDocContext_Impl(
                SwXMLImport& rImport,
                sal_uInt16 nPrfx,
                const OUString& rLName,
                const Reference< xml::sax::XAttributeList > & xAttrList,
                const Reference< document::XDocumentProperties >& xDocProps,
                const Reference< xml::sax::XDocumentHandler >& xDocBuilder) :
    SvXMLImportContext( rImport, nPrfx, rLName ),
    SwXMLDocContext_Impl( rImport, nPrfx, rLName, xAttrList ),
    SvXMLMetaDocumentContext( rImport, nPrfx, rLName, xDocProps, xDocBuilder)
{
}

SwXMLOfficeDocContext_Impl::~SwXMLOfficeDocContext_Impl()
{
}

TYPEINIT1( SwXMLOfficeDocContext_Impl, SwXMLDocContext_Impl );

SvXMLImportContext* SwXMLOfficeDocContext_Impl::CreateChildContext(
                sal_uInt16 nPrefix,
                const OUString& rLocalName,
                const Reference< xml::sax::XAttributeList > & xAttrList )
{
    const SvXMLTokenMap& rTokenMap = GetSwImport().GetDocElemTokenMap();

    // assign paragraph styles to list levels of outline style after all styles
    // are imported and finished. This is the case, when <office:body> starts
    // in flat OpenDocument file format.
    {
        if ( rTokenMap.Get( nPrefix, rLocalName ) == XML_TOK_DOC_BODY )
        {
            GetImport().GetTextImport()->SetOutlineStyles( sal_True );
        }
    }

    // behave like meta base class iff we encounter office:meta
    if ( XML_TOK_DOC_META == rTokenMap.Get( nPrefix, rLocalName ) ) {
        return SvXMLMetaDocumentContext::CreateChildContext(
                    nPrefix, rLocalName, xAttrList );
    } else {
        return SwXMLDocContext_Impl::CreateChildContext(
                    nPrefix, rLocalName, xAttrList );
    }
}
// <--

// --> OD 2006-10-11 #i69629#
// new subclass <SwXMLDocStylesContext_Impl> of class <SwXMLDocContext_Impl>
class SwXMLDocStylesContext_Impl : public SwXMLDocContext_Impl
{
public:

    SwXMLDocStylesContext_Impl( SwXMLImport& rImport,
                                sal_uInt16 nPrfx,
                                const OUString& rLName,
                                const Reference< xml::sax::XAttributeList > & xAttrList );
    virtual ~SwXMLDocStylesContext_Impl();

    TYPEINFO();

    virtual void EndElement();
};

SwXMLDocStylesContext_Impl::SwXMLDocStylesContext_Impl(
                    SwXMLImport& rImport,
                    sal_uInt16 nPrfx,
                    const OUString& rLName,
                    const Reference< xml::sax::XAttributeList > & xAttrList ) :
    SvXMLImportContext( rImport, nPrfx, rLName ),
    SwXMLDocContext_Impl( rImport, nPrfx, rLName, xAttrList )
{
}

SwXMLDocStylesContext_Impl::~SwXMLDocStylesContext_Impl()
{
}

TYPEINIT1( SwXMLDocStylesContext_Impl, SwXMLDocContext_Impl );

void SwXMLDocStylesContext_Impl::EndElement()
{
    // assign paragraph styles to list levels of outline style after all styles
    // are imported and finished.
    SwXMLImport& rSwImport = dynamic_cast<SwXMLImport&>( GetImport());
    GetImport().GetTextImport()->SetOutlineStyles(
            (rSwImport.GetStyleFamilyMask() & SFX_STYLE_FAMILY_PARA ) ? sal_True : sal_False);
    // <--
}
// <--
//----------------------------------------------------------------------------

const SvXMLTokenMap& SwXMLImport::GetDocElemTokenMap()
{
    if( !pDocElemTokenMap )
        pDocElemTokenMap = new SvXMLTokenMap( aDocTokenMap );

    return *pDocElemTokenMap;
}

SvXMLImportContext *SwXMLImport::CreateContext(
        sal_uInt16 nPrefix,
        const OUString& rLocalName,
        const Reference< xml::sax::XAttributeList > & xAttrList )
{
    SvXMLImportContext *pContext = 0;

    // --> OD 2006-10-11 #i69629#
    // own subclasses for <office:document> and <office:document-styles>
    if( XML_NAMESPACE_OFFICE==nPrefix &&
//        ( IsXMLToken( rLocalName, XML_DOCUMENT ) ||
//        ( IsXMLToken( rLocalName, XML_DOCUMENT_META ) ||
        ( IsXMLToken( rLocalName, XML_DOCUMENT_SETTINGS ) ||
//          IsXMLToken( rLocalName, XML_DOCUMENT_STYLES ) ||
          IsXMLToken( rLocalName, XML_DOCUMENT_CONTENT ) ))
        pContext = new SwXMLDocContext_Impl( *this, nPrefix, rLocalName,
                                             xAttrList );
    else if ( XML_NAMESPACE_OFFICE==nPrefix &&
              IsXMLToken( rLocalName, XML_DOCUMENT_META ) )
    {
        pContext = CreateMetaContext(rLocalName);
    }
    else if ( XML_NAMESPACE_OFFICE==nPrefix &&
              IsXMLToken( rLocalName, XML_DOCUMENT_STYLES ) )
    {
        pContext = new SwXMLDocStylesContext_Impl( *this, nPrefix, rLocalName,
                                                   xAttrList );
    }
    else if ( XML_NAMESPACE_OFFICE==nPrefix &&
              IsXMLToken( rLocalName, XML_DOCUMENT ) )
    {
        uno::Reference<xml::sax::XDocumentHandler> xDocBuilder(
            mxServiceFactory->createInstance(::rtl::OUString::createFromAscii(
                "com.sun.star.xml.dom.SAXDocumentBuilder")),
                uno::UNO_QUERY_THROW);
        uno::Reference<document::XDocumentProperties> const xDocProps(
            GetDocumentProperties());
        // flat OpenDocument file format
        pContext = new SwXMLOfficeDocContext_Impl( *this, nPrefix, rLocalName,
                        xAttrList, xDocProps, xDocBuilder);
    }
    // <--
    else
        pContext = SvXMLImport::CreateContext( nPrefix, rLocalName, xAttrList );

    return pContext;
}

// #110680#
SwXMLImport::SwXMLImport(
    const uno::Reference< lang::XMultiServiceFactory > xServiceFactory,
    sal_uInt16 nImportFlags)
:   SvXMLImport( xServiceFactory, nImportFlags ),
    pSttNdIdx( 0 ),
    pTableItemMapper( 0 ),
    pDocElemTokenMap( 0 ),
    pTableElemTokenMap( 0 ),
    pTableCellAttrTokenMap( 0 ),
    pGraphicResolver( 0 ),
    pEmbeddedResolver( 0 ),
    nStyleFamilyMask( SFX_STYLE_FAMILY_ALL ),
    bLoadDoc( sal_True ),
    bInsert( sal_False ),
    bBlock( sal_False ),
    bShowProgress( sal_True ),
    bOrganizerMode( sal_False ),
    bInititedXForms( sal_False ),
    bPreserveRedlineMode( sal_True )
{
    _InitItemImport();

}

#ifdef XML_CORE_API
// #110680#
SwXMLImport::SwXMLImport(
    const uno::Reference< lang::XMultiServiceFactory > xServiceFactory,
    SwDoc& rDoc,
    const SwPaM& rPaM,
    sal_Bool bLDoc,
    sal_Bool bInsertMode,
    sal_uInt16 nStyleFamMask,
    const uno::Reference<   frame::XModel > & rModel,
    const uno::Reference<   document::XGraphicObjectResolver > & rEGO,
    SvStorage *pPkg )
:   SvXMLImport( xServiceFactory, rModel, rEGO ),
    bLoadDoc( bLDoc ),
    bInsert( bInsertMode ),
    nStyleFamilyMask( nStyleFamMask ),
    pDocElemTokenMap( 0 ),
    pTableElemTokenMap( 0 ),
    pTableCellAttrTokenMap( 0 ),
    pTableItemMapper( 0 ),
    pSttNdIdx( 0 ),
    bShowProgress( sal_True ),
    bPreserveRedlineMode( sal_True ),
    xPackage( pPkg )
{
    _InitItemImport();

    Reference < XTextRange > xTextRange =
        SwXTextRange::CreateTextRangeFromPosition( &rDoc, *rPaM.GetPoint(), 0 );
    Reference < XText > xText = xTextRange->getText();
    Reference < XTextCursor > xTextCursor =
        xText->createTextCursorByRange( xTextRange );
    GetTextImport()->SetCursor( xTextCursor );
}
#endif

SwXMLImport::~SwXMLImport() throw ()
{
    delete pDocElemTokenMap;
    delete pTableElemTokenMap;
    delete pTableCellAttrTokenMap;
    _FinitItemImport();
}

void SwXMLImport::setTextInsertMode(
         const Reference< XTextRange > & rInsertPos )
{
    bInsert = sal_True;

    Reference < XText > xText = rInsertPos->getText();
    Reference < XTextCursor > xTextCursor =
        xText->createTextCursorByRange( rInsertPos );
    GetTextImport()->SetCursor( xTextCursor );
}

void SwXMLImport::setStyleInsertMode( sal_uInt16 nFamilies,
                                      sal_Bool bOverwrite )
{
    bInsert = !bOverwrite;
    nStyleFamilyMask = nFamilies;
    bLoadDoc = sal_False;
}

void SwXMLImport::setBlockMode( )
{
    bBlock = sal_True;
}

void SwXMLImport::setOrganizerMode( )
{
    bOrganizerMode = sal_True;
}

const Sequence< sal_Int8 > & SwXMLImport::getUnoTunnelId() throw()
{
    static uno::Sequence< sal_Int8 > aSeq = ::CreateUnoTunnelId();
    return aSeq;
}

sal_Int64 SAL_CALL SwXMLImport::getSomething( const Sequence< sal_Int8 >& rId )
    throw(RuntimeException)
{
    if( rId.getLength() == 16
        && 0 == rtl_compareMemory( getUnoTunnelId().getConstArray(),
                                        rId.getConstArray(), 16 ) )
    {
        return sal::static_int_cast< sal_Int64 >( reinterpret_cast< sal_IntPtr >(this) );
    }
    return SvXMLImport::getSomething( rId );
}

OTextCursorHelper *lcl_xml_GetSwXTextCursor( const Reference < XTextCursor >& rTextCursor )
{
    Reference<XUnoTunnel> xCrsrTunnel( rTextCursor, UNO_QUERY );
    ASSERT( xCrsrTunnel.is(), "missing XUnoTunnel for Cursor" );
    if( !xCrsrTunnel.is() )
        return 0;
    OTextCursorHelper *pTxtCrsr = reinterpret_cast< OTextCursorHelper *>(
            sal::static_int_cast< sal_IntPtr >( xCrsrTunnel->getSomething(  OTextCursorHelper::getUnoTunnelId() )));
    ASSERT( pTxtCrsr, "SwXTextCursor missing" );
    return pTxtCrsr;
}

void SwXMLImport::startDocument( void )
    throw( xml::sax::SAXException, uno::RuntimeException )
{
    // delegate to parent
    SvXMLImport::startDocument();

    DBG_ASSERT( GetModel().is(), "model is missing" );
    if( !GetModel().is() )
        return;

    // this method will modify the document directly -> lock SolarMutex
    vos::OGuard aGuard(Application::GetSolarMutex());


    Reference< XPropertySet > xImportInfo( getImportInfo() );
    Reference< XPropertySetInfo > xPropertySetInfo;
    if( xImportInfo.is() )
        xPropertySetInfo = xImportInfo->getPropertySetInfo();
    if( xPropertySetInfo.is() )
    {
        Any aAny;
        // insert style mode?
        OUString sStyleInsertModeFamilies(
                RTL_CONSTASCII_USTRINGPARAM("StyleInsertModeFamilies"));
        if( xPropertySetInfo->hasPropertyByName(sStyleInsertModeFamilies) )
        {
            aAny = xImportInfo->getPropertyValue(sStyleInsertModeFamilies);
            Sequence< OUString> aFamiliesSeq;
            if( aAny >>= aFamiliesSeq )
            {
                OUString sFrameStyles( RTL_CONSTASCII_USTRINGPARAM ( "FrameStyles" ) );
                OUString sPageStyles( RTL_CONSTASCII_USTRINGPARAM ( "PageStyles" ) );
                OUString sCharacterStyles( RTL_CONSTASCII_USTRINGPARAM ( "CharacterStyles" ) );
                OUString sParagraphStyles( RTL_CONSTASCII_USTRINGPARAM ( "ParagraphStyles" ) );
                OUString sNumberingStyles( RTL_CONSTASCII_USTRINGPARAM ( "NumberingStyles" ) );
                sal_uInt16 nFamilyMask = 0U;
                sal_Int32 nCount = aFamiliesSeq.getLength();
                const OUString *pSeq = aFamiliesSeq.getConstArray();
                for( sal_Int32 i=0; i < nCount; i++ )
                {
                    const OUString& rFamily = pSeq[i];
                    if( rFamily==sFrameStyles )
                        nFamilyMask |= SFX_STYLE_FAMILY_FRAME;
                    else if( rFamily==sPageStyles )
                        nFamilyMask |= SFX_STYLE_FAMILY_PAGE;
                    else if( rFamily==sCharacterStyles )
                        nFamilyMask |= SFX_STYLE_FAMILY_CHAR;
                    else if( rFamily==sParagraphStyles )
                        nFamilyMask |= SFX_STYLE_FAMILY_PARA;
                    else if( rFamily==sNumberingStyles )
                        nFamilyMask |= SFX_STYLE_FAMILY_PSEUDO;
                }

                sal_Bool bOverwrite = sal_False;
                OUString sStyleInsertModeOverwrite(
                    RTL_CONSTASCII_USTRINGPARAM("StyleInsertModeOverwrite"));
                if( xPropertySetInfo->hasPropertyByName(sStyleInsertModeOverwrite) )
                {
                    aAny = xImportInfo->getPropertyValue(sStyleInsertModeOverwrite);
                    if( aAny.getValueType() == ::getBooleanCppuType() &&
                        *static_cast<const sal_Bool*>(aAny.getValue()) )
                        bOverwrite = sal_True;
                }

                setStyleInsertMode( nFamilyMask, bOverwrite );
            }
        }

        // text insert mode?
        OUString sTextInsertModeRange(
                RTL_CONSTASCII_USTRINGPARAM("TextInsertModeRange"));
        if( xPropertySetInfo->hasPropertyByName(sTextInsertModeRange) )
        {
            aAny = xImportInfo->getPropertyValue(sTextInsertModeRange);
            Reference<XTextRange> xInsertTextRange;
            if( aAny >>= xInsertTextRange )
                setTextInsertMode( xInsertTextRange );
        }

        // auto text mode
        OUString sAutoTextMode(
                RTL_CONSTASCII_USTRINGPARAM("AutoTextMode"));
        if( xPropertySetInfo->hasPropertyByName(sAutoTextMode) )
        {
            aAny = xImportInfo->getPropertyValue(sAutoTextMode);
            if( aAny.getValueType() == ::getBooleanCppuType() &&
                *static_cast<const sal_Bool*>(aAny.getValue()) )
                    setBlockMode();
        }

        // organizer mode
        OUString sOrganizerMode(
                RTL_CONSTASCII_USTRINGPARAM("OrganizerMode"));
        if( xPropertySetInfo->hasPropertyByName(sOrganizerMode) )
        {
            aAny = xImportInfo->getPropertyValue(sOrganizerMode);
            if( aAny.getValueType() == ::getBooleanCppuType() &&
                *static_cast<const sal_Bool*>(aAny.getValue()) )
                    setOrganizerMode();
        }
    }

    // There only is a text cursor by now if we are in insert mode. In any
    // other case we have to create one at the start of the document.
    // We also might change into the insert mode later, so we have to make
    // sure to first set the insert mode and then create the text import
    // helper. Otherwise it won't have the insert flag set!
    OTextCursorHelper *pTxtCrsr = 0;
    Reference < XTextCursor > xTextCursor;
    if( HasTextImport() )
        xTextCursor = GetTextImport()->GetCursor();
    if( !xTextCursor.is() )
    {
        Reference < XTextDocument > xTextDoc( GetModel(), UNO_QUERY );
        Reference < XText > xText = xTextDoc->getText();
        xTextCursor = xText->createTextCursor();
        SwCrsrShell *pCrsrSh = 0;
        SwDoc *pDoc = 0;
        if( IMPORT_ALL == getImportFlags() )
        {
            pTxtCrsr = lcl_xml_GetSwXTextCursor( xTextCursor );
            ASSERT( pTxtCrsr, "SwXTextCursor missing" );
            if( !pTxtCrsr )
                return;

            pDoc = pTxtCrsr->GetDoc();
            ASSERT( pDoc, "SwDoc missing" );
            if( !pDoc )
                return;

            // Is there a edit shell. If yes, then we are currently inserting
            // a document. We then have to insert at the current edit shell's
            // cursor position. That not quite clean code, but there is no other
            // way currently.
            pCrsrSh = pDoc->GetEditShell();
        }
        if( pCrsrSh )
        {
            const uno::Reference<text::XTextRange> xInsertTextRange(
                SwXTextRange::CreateXTextRange(
                    *pDoc, *pCrsrSh->GetCrsr()->GetPoint(), 0 ) );
            setTextInsertMode( xInsertTextRange );
            xTextCursor = GetTextImport()->GetCursor();
            pTxtCrsr = 0;
        }
        else
            GetTextImport()->SetCursor( xTextCursor );
    }

    if( (getImportFlags() & (IMPORT_CONTENT|IMPORT_MASTERSTYLES)) == 0 )
        return;

    if( !pTxtCrsr  )
        pTxtCrsr = lcl_xml_GetSwXTextCursor( xTextCursor );
    ASSERT( pTxtCrsr, "SwXTextCursor missing" );
    if( !pTxtCrsr )
        return;

    SwDoc *pDoc = pTxtCrsr->GetDoc();
    ASSERT( pDoc, "SwDoc missing" );
    if( !pDoc )
        return;

    if( (getImportFlags() & IMPORT_CONTENT) != 0 && !IsStylesOnlyMode() )
    {
        pSttNdIdx = new SwNodeIndex( pDoc->GetNodes() );
        if( IsInsertMode() )
        {
            SwPaM *pPaM = pTxtCrsr->GetPaM();
            const SwPosition* pPos = pPaM->GetPoint();

            // Split once and remember the node that has been splitted.
            pDoc->SplitNode( *pPos, false );
            *pSttNdIdx = pPos->nNode.GetIndex()-1;

            // Split again.
            pDoc->SplitNode( *pPos, false );

            // Insert all content into the new node
            pPaM->Move( fnMoveBackward );
            pDoc->SetTxtFmtColl
                ( *pPaM, pDoc->GetTxtCollFromPool(RES_POOLCOLL_STANDARD, false ) );
        }
    }

    // We need a draw model to be able to set the z order
    // --> OD 2005-08-08 #i52858# - method name changed
    pDoc->GetOrCreateDrawModel();
    // <--

    // SJ: #i49801# locking the modell to disable repaints
    SdrModel* pDrawModel = pDoc->GetDrawModel();
    if ( pDrawModel )
        pDrawModel->setLock( sal_True );

    if( !GetGraphicResolver().is() )
    {
        pGraphicResolver = SvXMLGraphicHelper::Create( GRAPHICHELPER_MODE_READ );
        Reference< document::XGraphicObjectResolver > xGraphicResolver( pGraphicResolver );
        SetGraphicResolver( xGraphicResolver );
    }

    if( !GetEmbeddedResolver().is() )
    {
        SfxObjectShell *pPersist = pDoc->GetPersist();
        if( pPersist )
        {
            pEmbeddedResolver = SvXMLEmbeddedObjectHelper::Create(
                                            *pPersist,
                                            EMBEDDEDOBJECTHELPER_MODE_READ );
            Reference< document::XEmbeddedObjectResolver > xEmbeddedResolver( pEmbeddedResolver );
            SetEmbeddedResolver( xEmbeddedResolver );
        }
    }
}

void SwXMLImport::endDocument( void )
    throw( xml::sax::SAXException, uno::RuntimeException )
{
    DBG_ASSERT( GetModel().is(), "model missing; maybe startDocument wasn't called?" );
    if( !GetModel().is() )
        return;

    // this method will modify the document directly -> lock SolarMutex
    vos::OGuard aGuard(Application::GetSolarMutex());

    if( pGraphicResolver )
        SvXMLGraphicHelper::Destroy( pGraphicResolver );
    if( pEmbeddedResolver )
        SvXMLEmbeddedObjectHelper::Destroy( pEmbeddedResolver );
    // Clear the shape import to sort the shapes  (and not in the
    // destructor that might be called after the import has finished
    // for Java filters.
    if( HasShapeImport() )
        ClearShapeImport();


    SwDoc *pDoc = 0;
    if( (getImportFlags() & IMPORT_CONTENT) != 0 && !IsStylesOnlyMode() )
    {
        Reference<XUnoTunnel> xCrsrTunnel( GetTextImport()->GetCursor(),
                                           UNO_QUERY);
        ASSERT( xCrsrTunnel.is(), "missing XUnoTunnel for Cursor" );
        OTextCursorHelper *pTxtCrsr = reinterpret_cast< OTextCursorHelper *>(
                sal::static_int_cast< sal_IntPtr >( xCrsrTunnel->getSomething( OTextCursorHelper::getUnoTunnelId() )));
        ASSERT( pTxtCrsr, "SwXTextCursor missing" );
        SwPaM *pPaM = pTxtCrsr->GetPaM();
        if( IsInsertMode() && pSttNdIdx->GetIndex() )
        {
            // If we are in insert mode, join the splitted node that is in front
            // of the new content with the first new node. Or in other words:
            // Revert the first split node.
            SwTxtNode* pTxtNode = pSttNdIdx->GetNode().GetTxtNode();
            SwNodeIndex aNxtIdx( *pSttNdIdx );
            if( pTxtNode && pTxtNode->CanJoinNext( &aNxtIdx ) &&
                pSttNdIdx->GetIndex() + 1 == aNxtIdx.GetIndex() )
            {
                // If the PaM points to the first new node, move the PaM to the
                // end of the previous node.
                if( pPaM && pPaM->GetPoint()->nNode == aNxtIdx )
                {
                    pPaM->GetPoint()->nNode = *pSttNdIdx;
                    pPaM->GetPoint()->nContent.Assign( pTxtNode,
                                            pTxtNode->GetTxt().Len() );
                }

#ifdef DBG_UTIL
                // !!! This should be impossible !!!!
                ASSERT( pSttNdIdx->GetIndex()+1 !=
                                        pPaM->GetBound( sal_True ).nNode.GetIndex(),
                        "PaM.Bound1 point to new node " );
                ASSERT( pSttNdIdx->GetIndex()+1 !=
                                        pPaM->GetBound( sal_False ).nNode.GetIndex(),
                        "PaM.Bound2 points to new node" );

                if( pSttNdIdx->GetIndex()+1 ==
                                        pPaM->GetBound( sal_True ).nNode.GetIndex() )
                {
                    sal_uInt16 nCntPos =
                            pPaM->GetBound( sal_True ).nContent.GetIndex();
                    pPaM->GetBound( sal_True ).nContent.Assign( pTxtNode,
                            pTxtNode->GetTxt().Len() + nCntPos );
                }
                if( pSttNdIdx->GetIndex()+1 ==
                                pPaM->GetBound( sal_False ).nNode.GetIndex() )
                {
                    sal_uInt16 nCntPos =
                            pPaM->GetBound( sal_False ).nContent.GetIndex();
                    pPaM->GetBound( sal_False ).nContent.Assign( pTxtNode,
                            pTxtNode->GetTxt().Len() + nCntPos );
                }
#endif
                // If the first new node isn't empty, convert  the node's text
                // attributes into hints. Otherwise, set the new node's
                // paragraph style at the previous (empty) node.
                SwTxtNode* pDelNd = aNxtIdx.GetNode().GetTxtNode();
                if( pTxtNode->GetTxt().Len() )
                    pDelNd->FmtToTxtAttr( pTxtNode );
                else
                    pTxtNode->ChgFmtColl( pDelNd->GetTxtColl() );
                pTxtNode->JoinNext();
            }
        }

        SwPosition* pPos = pPaM->GetPoint();
        DBG_ASSERT( !pPos->nContent.GetIndex(), "last paragraph isn't empty" );
        if( !pPos->nContent.GetIndex() )
        {
            SwTxtNode* pCurrNd;
            sal_uLong nNodeIdx = pPos->nNode.GetIndex();
            pDoc = pPaM->GetDoc();

            DBG_ASSERT( pPos->nNode.GetNode().IsCntntNode(),
                        "insert position is not a content node" );
            if( !IsInsertMode() )
            {
                // If we're not in insert mode, the last node is deleted.
                const SwNode *pPrev = pDoc->GetNodes()[nNodeIdx -1];
                if( pPrev->IsCntntNode() ||
                    ( pPrev->IsEndNode() &&
                      pPrev->StartOfSectionNode()->IsSectionNode() ) )
                {
                    SwCntntNode* pCNd = pPaM->GetCntntNode();
                    if( pCNd && pCNd->StartOfSectionIndex()+2 <
                        pCNd->EndOfSectionIndex() )
                    {
                        pPaM->GetBound(sal_True).nContent.Assign( 0, 0 );
                        pPaM->GetBound(sal_False).nContent.Assign( 0, 0 );
                        pDoc->GetNodes().Delete( pPaM->GetPoint()->nNode );
                    }
                }
            }
            else if( 0 != (pCurrNd = pDoc->GetNodes()[nNodeIdx]->GetTxtNode()) )
            {
                // Id we're in insert mode, the empty node is joined with
                // the next and the previous one.
                if( pCurrNd->CanJoinNext( &pPos->nNode ))
                {
                    SwTxtNode* pNextNd = pPos->nNode.GetNode().GetTxtNode();
                    pPos->nContent.Assign( pNextNd, 0 );
                    pPaM->SetMark(); pPaM->DeleteMark();
                    pNextNd->JoinPrev();

                    // Remove line break that has been inserted by the import,
                    // but only if one has been inserted!
                    if( pNextNd->CanJoinPrev(/* &pPos->nNode*/ ) &&
                        *pSttNdIdx != pPos->nNode )
                    {
//                      SwTxtNode* pPrevNd = pPos->nNode.GetNode().GetTxtNode();
//                      pPos->nContent.Assign( pPrevNd, 0 );
//                      pPaM->SetMark(); pPaM->DeleteMark();
//                      pPrevNd->JoinNext();
                        pNextNd->JoinPrev();
                    }
                }
                else if( !pCurrNd->GetTxt().Len() )
                {
                    pPos->nContent.Assign( 0, 0 );
                    pPaM->SetMark(); pPaM->DeleteMark();
                    pDoc->GetNodes().Delete( pPos->nNode, 1 );
                    pPaM->Move( fnMoveBackward );
                }
            }
        }
    }

    /* #108146# Was called too early. Moved from
        SwXMLBodyContext_Impl::EndElement */

    GetTextImport()->RedlineAdjustStartNodeCursor( sal_False );

    if( (getImportFlags() & IMPORT_CONTENT) != 0 ||
        ((getImportFlags() & IMPORT_MASTERSTYLES) != 0 && IsStylesOnlyMode()) )
    {
        // pDoc might be 0. In this case UpdateTxtCollCondition is looking
        // for it itself.
        UpdateTxtCollConditions( pDoc );
    }

    GetTextImport()->ResetCursor();

    delete pSttNdIdx;
    pSttNdIdx = 0;

    if( (getImportFlags() == IMPORT_ALL ) )
    {
        // Notify math objects. If we are in the package filter this will
        // be done by the filter object itself
        if( IsInsertMode() )
            pDoc->PrtOLENotify( sal_False );
        else if ( pDoc->IsOLEPrtNotifyPending() )
            pDoc->PrtOLENotify( sal_True );
    }

    // SJ: #i49801# -> now permitting repaints
    if ( pDoc )
    {
        SdrModel* pDrawModel = pDoc->GetDrawModel();
        if ( pDrawModel )
            pDrawModel->setLock( sal_False );
    }

    // #i90243#
    if ( bInititedXForms )
    {
        Reference< xforms::XFormsSupplier > xFormsSupp( GetModel(), UNO_QUERY );
        Reference< XNameAccess > xXForms;
        if ( xFormsSupp.is() )
            xXForms = xFormsSupp->getXForms().get();

        if ( xXForms.is() )
        {
            try
            {
                Sequence< beans::PropertyValue > aXFormsSettings;

                ::rtl::OUString sXFormsSettingsName( GetXMLToken( XML_XFORM_MODEL_SETTINGS ) );
                if ( xLateInitSettings.is() && xLateInitSettings->hasByName( sXFormsSettingsName ) )
                {
                    OSL_VERIFY( xLateInitSettings->getByName( sXFormsSettingsName ) >>= aXFormsSettings );
                    applyXFormsSettings( xXForms, aXFormsSettings );
                }
            }
            catch( const Exception& )
            {
                DBG_UNHANDLED_EXCEPTION();
            }
        }
    }

    // delegate to parent: takes care of error handling
    SvXMLImport::endDocument();
}


// Locally derive XMLTextShapeImportHelper, so we can take care of the
// form import This is Writer, but not text specific, so it should go
// here!
class SvTextShapeImportHelper : public XMLTextShapeImportHelper
{
    // hold own reference form import helper, because the SvxImport
    // stored in the superclass, from whom we originally got the
    // reference, is already destroyed when we want to use it in the
    // destructor
    UniReference< ::xmloff::OFormLayerXMLImport > rFormImport;

    // hold reference to the one page (if it exists) for calling startPage()
    // and endPage. If !xPage.is(), then this document doesn't have a
    // XDrawPage.
    Reference<drawing::XDrawPage> xPage;

public:

    SvTextShapeImportHelper(SvXMLImport& rImp);
    virtual ~SvTextShapeImportHelper();
};

SvTextShapeImportHelper::SvTextShapeImportHelper(SvXMLImport& rImp) :
    XMLTextShapeImportHelper(rImp)
{
    Reference<drawing::XDrawPageSupplier> xSupplier(rImp.GetModel(),UNO_QUERY);
    if (xSupplier.is())
    {
        if (rImp.GetFormImport().is())
        {
            rImp.GetFormImport()->startPage(xSupplier->getDrawPage());
            rFormImport = rImp.GetFormImport();
        }

        xPage  = xSupplier->getDrawPage();
        Reference<XShapes> xShapes( xPage, UNO_QUERY );
        XMLShapeImportHelper::startPage( xShapes );
    }
}

SvTextShapeImportHelper::~SvTextShapeImportHelper()
{
    rFormImport->endPage();

    if (xPage.is())
    {
        Reference<XShapes> xShapes( xPage, UNO_QUERY );
        XMLShapeImportHelper::endPage(xShapes);
    }
}


XMLShapeImportHelper* SwXMLImport::CreateShapeImport()
{
    return new SvTextShapeImportHelper( *this );
}

SvXMLImportContext *SwXMLImport::CreateFontDeclsContext(
        const OUString& rLocalName,
        const Reference< xml::sax::XAttributeList > & xAttrList )
{
    XMLFontStylesContext *pFSContext =
            new XMLFontStylesContext( *this, XML_NAMESPACE_OFFICE,
                                      rLocalName, xAttrList,
                                      gsl_getSystemTextEncoding() );
    SetFontDecls( pFSContext );
    return pFSContext;
}
void SwXMLImport::SetViewSettings(const Sequence < PropertyValue > & aViewProps)
{
    if (IsInsertMode() || IsStylesOnlyMode() || IsBlockMode() || IsOrganizerMode() || !GetModel().is() )
        return;

    // this method will modify the document directly -> lock SolarMutex
    vos::OGuard aGuard(Application::GetSolarMutex());

    Reference < XTextDocument > xTextDoc( GetModel(), UNO_QUERY );
    Reference < XText > xText = xTextDoc->getText();
    Reference<XUnoTunnel> xTextTunnel( xText, UNO_QUERY);
    ASSERT( xTextTunnel.is(), "missing XUnoTunnel for Cursor" );
    if( !xTextTunnel.is() )
        return;

    SwXText *pText = reinterpret_cast< SwXText *>(
            sal::static_int_cast< sal_IntPtr >( xTextTunnel->getSomething( SwXText::getUnoTunnelId() )));
    ASSERT( pText, "SwXText missing" );
    if( !pText )
        return;

    SwDoc *pDoc = pText->GetDoc();
    Rectangle aRect;
    if( pDoc->GetDocShell() )
        aRect = pDoc->GetDocShell()->GetVisArea( ASPECT_CONTENT );
        //TODO/LATER: why that cast?!
        //aRect = ((SfxInPlaceObject *)pDoc->GetDocShell())->GetVisArea();

    sal_Int32 nCount = aViewProps.getLength();
    const PropertyValue *pValue = aViewProps.getConstArray();

    sal_Int64 nTmp = 0;
    sal_Bool bShowRedlineChanges = sal_False, bBrowseMode = sal_False;
    sal_Bool bChangeShowRedline = sal_False, bChangeBrowseMode = sal_False;

    //TODO/LATER: why that cast?!
    sal_Bool bTwip = pDoc->GetDocShell()->GetMapUnit ( ) == MAP_TWIP;
    //sal_Bool bTwip = pDoc->GetDocShell()->SfxInPlaceObject::GetMapUnit ( ) == MAP_TWIP;

    for (sal_Int32 i = 0; i < nCount ; i++)
    {
        if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ViewAreaTop" ) ) )
        {
            pValue->Value >>= nTmp;
            aRect.setY( static_cast< long >(bTwip ? MM100_TO_TWIP ( nTmp ) : nTmp) );
        }
        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ViewAreaLeft" ) ) )
        {
            pValue->Value >>= nTmp;
            aRect.setX( static_cast< long >(bTwip ? MM100_TO_TWIP ( nTmp ) : nTmp) );
        }
        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ViewAreaWidth" ) ) )
        {
            pValue->Value >>= nTmp;
            Size aSize( aRect.GetSize() );
            aSize.Width() = static_cast< long >(bTwip ? MM100_TO_TWIP ( nTmp ) : nTmp);
            aRect.SetSize( aSize );
        }
        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ViewAreaHeight" ) ) )
        {
            pValue->Value >>= nTmp;
            Size aSize( aRect.GetSize() );
            aSize.Height() = static_cast< long >(bTwip ? MM100_TO_TWIP ( nTmp ) : nTmp);
            aRect.SetSize( aSize );
        }
        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ShowRedlineChanges" ) ) )
        {
            bShowRedlineChanges = *(sal_Bool *)(pValue->Value.getValue());
            bChangeShowRedline = sal_True;
        }
// #105372#: Headers and footers are not displayed in BrowseView anymore
//        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ShowHeaderWhileBrowsing" ) ) )
//        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "ShowFooterWhileBrowsing" ) ) )
        else if (pValue->Name.equalsAsciiL( RTL_CONSTASCII_STRINGPARAM ( "InBrowseMode" ) ) )
        {
            bBrowseMode = *(sal_Bool *)(pValue->Value.getValue());
            bChangeBrowseMode = sal_True;
        }
        pValue++;
    }
    if( pDoc->GetDocShell() )
        pDoc->GetDocShell()->SetVisArea ( aRect );

    if (bChangeBrowseMode)
        pDoc->set(IDocumentSettingAccess::BROWSE_MODE, bBrowseMode );

    if (bChangeShowRedline)
        GetTextImport()->SetShowChanges( bShowRedlineChanges );
}

void SwXMLImport::SetConfigurationSettings(const Sequence < PropertyValue > & aConfigProps)
{
    // this method will modify the document directly -> lock SolarMutex
    vos::OGuard aGuard(Application::GetSolarMutex());

    Reference< lang::XMultiServiceFactory > xFac( GetModel(), UNO_QUERY );
    if( !xFac.is() )
        return;

    Reference< XPropertySet > xProps( xFac->createInstance( OUString( RTL_CONSTASCII_USTRINGPARAM( "com.sun.star.document.Settings" ) ) ), UNO_QUERY );
    if( !xProps.is() )
        return;

    Reference< XPropertySetInfo > xInfo( xProps->getPropertySetInfo() );
    if( !xInfo.is() )
        return;

    hash_set< String, StringHashRef, StringEqRef > aSet;
    aSet.insert(String("ForbiddenCharacters", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("IsKernAsianPunctuation", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("CharacterCompressionType", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("LinkUpdateMode", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("FieldAutoUpdate", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("ChartAutoUpdate", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("AddParaTableSpacing", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("AddParaTableSpacingAtStart", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintAnnotationMode", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintBlackFonts", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintControls", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintDrawings", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintGraphics", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintLeftPages", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintPageBackground", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintProspect", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintReversed", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintRightPages", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintFaxName", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintPaperFromSetup", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintTables", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintSingleJobs", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("UpdateFromTemplate", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrinterIndependentLayout", RTL_TEXTENCODING_ASCII_US));
    aSet.insert(String("PrintEmptyPages", RTL_TEXTENCODING_ASCII_US));

    sal_Int32 nCount = aConfigProps.getLength();
    const PropertyValue* pValues = aConfigProps.getConstArray();

    SvtSaveOptions aSaveOpt;
    sal_Bool bIsUserSetting = aSaveOpt.IsLoadUserSettings();
    sal_Bool bSet = bIsUserSetting;

    // for some properties we don't want to use the application
    // default if they're missing. So we watch for them in the loop
    // below, and set them if not found
    bool bPrinterIndependentLayout = false;
    bool bUseOldNumbering = false; // #111955#
    bool bOutlineLevelYieldsOutlineRule = false;
    bool bAddExternalLeading = false;
    bool bAddParaSpacingToTableCells = false;
    bool bUseFormerLineSpacing = false;
    bool bUseFormerObjectPositioning = false;
    bool bUseFormerTextWrapping = false;
    bool bConsiderWrapOnObjPos = false;
    bool bIgnoreFirstLineIndentInNumbering = false;
    bool bDoNotJustifyLinesWithManualBreak = false;
    bool bDoNotResetParaAttrsForNumFont    = false;
    bool bLoadReadonly = false;
    bool bDoNotCaptureDrawObjsOnPage( false );
    bool bClipAsCharacterAnchoredWriterFlyFrames( false );
    bool bUnixForceZeroExtLeading = false;
    bool bUseOldPrinterMetrics = false;

    static const OUString sRedlineProtectionKey( RTL_CONSTASCII_USTRINGPARAM( "RedlineProtectionKey" ) );

    // Set current database properties in certain order
    // Thus, keep these properties during loop and set them afterwards in valid order
    static const OUString sCurrentDatabaseDataSource( RTL_CONSTASCII_USTRINGPARAM( "CurrentDatabaseDataSource" ) );
    uno::Any aCurrentDatabaseDataSource;
    static const OUString sCurrentDatabaseCommand( RTL_CONSTASCII_USTRINGPARAM( "CurrentDatabaseCommand" ) );
    uno::Any aCurrentDatabaseCommand;
    static const OUString sCurrentDatabaseCommandType( RTL_CONSTASCII_USTRINGPARAM( "CurrentDatabaseCommandType" ) );
    uno::Any aCurrentDatabaseCommandType;

    while( nCount-- )
    {
        if( !bIsUserSetting )
        {
            // test over the hash value if the entry is in the table.
            String aStr(pValues->Name);

            bSet = aSet.find(aStr) == aSet.end();
        }

        if( bSet )
        {
            try
            {
                if( xInfo->hasPropertyByName( pValues->Name ) )
                {
                    if( pValues->Name.equals( sRedlineProtectionKey ) )
                    {
                        Sequence<sal_Int8> aKey;
                        pValues->Value >>= aKey;
                        GetTextImport()->SetChangesProtectionKey( aKey );
                    }
                    else if ( !aCurrentDatabaseDataSource.hasValue()
                              && pValues->Name.equals( sCurrentDatabaseDataSource ) )
                    {
                        aCurrentDatabaseDataSource = pValues->Value;
                    }
                    else if ( !aCurrentDatabaseCommand.hasValue()
                              && pValues->Name.equals( sCurrentDatabaseCommand ) )
                    {
                        aCurrentDatabaseCommand = pValues->Value;
                    }
                    else if ( !aCurrentDatabaseCommandType.hasValue()
                              && pValues->Name.equals( sCurrentDatabaseCommandType ) )
                    {
                        aCurrentDatabaseCommandType = pValues->Value;
                    }
                    else
                    {
                        xProps->setPropertyValue( pValues->Name, pValues->Value );
                    }
                }

                // did we find any of the non-default cases?
                if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("PrinterIndependentLayout")) )
                    bPrinterIndependentLayout = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("AddExternalLeading")) )
                    bAddExternalLeading = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("AddParaSpacingToTableCells")) )
                    bAddParaSpacingToTableCells = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UseFormerLineSpacing")) )
                    bUseFormerLineSpacing = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UseFormerObjectPositioning")) )
                    bUseFormerObjectPositioning = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UseFormerTextWrapping")) )
                    bUseFormerTextWrapping = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UseOldNumbering")) )
                    bUseOldNumbering = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("OutlineLevelYieldsNumbering")) )
                    bOutlineLevelYieldsOutlineRule = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("ConsiderTextWrapOnObjPos")) )
                    bConsiderWrapOnObjPos = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("IgnoreFirstLineIndentInNumbering")) )
                    bIgnoreFirstLineIndentInNumbering = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("DoNotJustifyLinesWithManualBreak")) )
                    bDoNotJustifyLinesWithManualBreak = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("DoNotResetParaAttrsForNumFont")) )
                    bDoNotResetParaAttrsForNumFont = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("LoadReadonly")) )
                    bLoadReadonly = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("DoNotCaptureDrawObjsOnPage")) )
                    bDoNotCaptureDrawObjsOnPage = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("ClipAsCharacterAnchoredWriterFlyFrames")) )
                    bClipAsCharacterAnchoredWriterFlyFrames = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UnxForceZeroExtLeading")) )
                    bUnixForceZeroExtLeading = true;
                else if( pValues->Name.equalsAsciiL(RTL_CONSTASCII_STRINGPARAM("UseOldPrinterMetrics")) )
                    bUseOldPrinterMetrics = true;
            }
            catch( Exception& )
            {
                DBG_ERROR( "SwXMLImport::SetConfigurationSettings: Exception!" );
            }
        }
        pValues++;
    }

    // apply current database properties
    {
        if ( aCurrentDatabaseDataSource.hasValue() )
        {
            xProps->setPropertyValue( sCurrentDatabaseDataSource, aCurrentDatabaseDataSource );
        }
        if ( aCurrentDatabaseCommand.hasValue() )
        {
            xProps->setPropertyValue( sCurrentDatabaseCommand, aCurrentDatabaseCommand );
        }
        if ( aCurrentDatabaseCommandType.hasValue() )
        {
            xProps->setPropertyValue( sCurrentDatabaseCommandType, aCurrentDatabaseCommandType );
        }
    }

    // finally, treat the non-default cases

    // introduce boolean, that indicates a document, written by version prior SO8.
    const bool bDocumentPriorSO8 = !bConsiderWrapOnObjPos;

    if( ! bPrinterIndependentLayout )
    {
        Any aAny;
        sal_Int16 nTmp = document::PrinterIndependentLayout::DISABLED;
        aAny <<= nTmp;
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("PrinterIndependentLayout") ),
            aAny );
    }

    if( ! bAddExternalLeading )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("AddExternalLeading")), makeAny( false ) );
    }

    if( ! bUseFormerLineSpacing )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("UseFormerLineSpacing")), makeAny( true ) );
    }

    if( !bUseFormerObjectPositioning )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("UseFormerObjectPositioning")), makeAny( true ) );
    }

    if( !bUseOldNumbering )
    {
        Any aAny;
        sal_Bool bOldNum = true;
        aAny.setValue(&bOldNum, ::getBooleanCppuType());
        xProps->setPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM("UseOldNumbering")), aAny );
    }

    if( !bOutlineLevelYieldsOutlineRule )
    {
        Any aAny;
        sal_Bool bTmp = true;
        aAny.setValue(&bTmp, ::getBooleanCppuType());
        xProps->setPropertyValue
            (OUString( RTL_CONSTASCII_USTRINGPARAM
                       ("OutlineLevelYieldsNumbering")),
                       aAny );
    }

    if( !bAddParaSpacingToTableCells )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("AddParaSpacingToTableCells")), makeAny( false ) );
    }

    if( !bUseFormerTextWrapping )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("UseFormerTextWrapping")), makeAny( true ) );
    }

    if( !bConsiderWrapOnObjPos )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("ConsiderTextWrapOnObjPos")), makeAny( false ) );
    }

    // FME 2005-05-27 #i47448#
    // For SO7pp4, part of the 'new numbering' stuff has been backported from
    // SO8. Unfortunately, only part of it and by using the same compatibility option
    // like in SO8. Therefore documents generated with SO7pp4, containing
    // numbered paragraphs with first line indent differ between SO7pp4 and
    // SO8. In order to fix this for SO8pp1, I introduce a new compatiblity
    // flag 'bIgnoreFirstLineIndentInNumbering'. This flag has to be set for all
    // documents < SO8, but not for SO8. So if the property is not present, the
    // flag will be set to 'true'. SO8 documents surely have the
    // 'ConsiderWrapOnObjPos' property set (no matter if 'true' or 'false'),
    // therefore the correct condition to set this flag is this:
    if( !bIgnoreFirstLineIndentInNumbering && bDocumentPriorSO8 )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("IgnoreFirstLineIndentInNumbering")), makeAny( true ) );
    }

    // This flag has to be set for all documents < SO8
    if ( !bDoNotJustifyLinesWithManualBreak && bDocumentPriorSO8 )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("DoNotJustifyLinesWithManualBreak")), makeAny( true ) );
    }
    // <--

    // This flag has to be set for all documents < SO8
    if ( !bDoNotResetParaAttrsForNumFont && bDocumentPriorSO8 )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("DoNotResetParaAttrsForNumFont")), makeAny( true ) );
    }

    if ( !bLoadReadonly )
    {
        xProps->setPropertyValue( OUString( RTL_CONSTASCII_USTRINGPARAM("LoadReadonly") ), makeAny( false ) );
    }

    // This flag has to be set for all documents < SO8
    if ( !bDoNotCaptureDrawObjsOnPage && bDocumentPriorSO8 )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("DoNotCaptureDrawObjsOnPage") ), makeAny( true ) );
    }

    // This flag has to be set for all documents < SO8
    if ( !bClipAsCharacterAnchoredWriterFlyFrames && bDocumentPriorSO8 )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("ClipAsCharacterAnchoredWriterFlyFrames") ), makeAny( true ) );
    }

    if ( !bUnixForceZeroExtLeading )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("UnxForceZeroExtLeading") ), makeAny( true ) );
    }

    if ( !bUseOldPrinterMetrics )
    {
        xProps->setPropertyValue(
            OUString( RTL_CONSTASCII_USTRINGPARAM("UseOldPrinterMetrics") ), makeAny( true ) );
    }
    // <--

    Reference < XTextDocument > xTextDoc( GetModel(), UNO_QUERY );
    Reference < XText > xText = xTextDoc->getText();
    Reference<XUnoTunnel> xTextTunnel( xText, UNO_QUERY);
    ASSERT( xTextTunnel.is(), "missing XUnoTunnel for Cursor" );
    if( xTextTunnel.is() )
    {
        SwXText *pText = reinterpret_cast< SwXText *>(
            sal::static_int_cast< sal_IntPtr >( xTextTunnel->getSomething( SwXText::getUnoTunnelId() )));
        ASSERT( pText, "SwXText missing" );
        if( pText )
        {
            SwDoc *pDoc = pText->GetDoc();
            if( pDoc )
            {
                SfxPrinter *pPrinter = pDoc->getPrinter( false );
                if( pPrinter )
                {
                    // If the printer is known, then the OLE objects will
                    // already have correct sizes, and we don't have to call
                    // PrtOLENotify again. Otherwise we have to call it.
                    // The flag might be set from setting the printer, so it
                    // it is required to clear it.
                    pDoc->SetOLEPrtNotifyPending( !pPrinter->IsKnown() );

                    // FME 2007-05-14 #147385# old printer metrics compatibility
                    if (  pDoc->get(IDocumentSettingAccess::USE_OLD_PRINTER_METRICS ) &&
                         !pDoc->get(IDocumentSettingAccess::USE_VIRTUAL_DEVICE ) )
                    {
                        pPrinter->Compat_OldPrinterMetrics( true );
                        pDoc->GetDocShell()->UpdateFontList();
                    }
                }
            }
        }
    }
}


void SwXMLImport::SetDocumentSpecificSettings(
    const ::rtl::OUString& _rSettingsGroupName,
    const Sequence< PropertyValue>& _rSettings )
{
    // the only doc-specific settings group we know so far are the XForms settings
    if ( !IsXMLToken( _rSettingsGroupName, XML_XFORM_MODEL_SETTINGS ) )
        return;

    // preserve the settings for a later iteration - we are currently reading the settings.xml,
    // the content.xml will be read later, by another instance of SwXMLImport
    OSL_ENSURE( xLateInitSettings.is(), "SwXMLImport::SetDocumentSpecificSettings: no storage for those settings!" );
    if ( !xLateInitSettings.is() )
        return;

    try
    {
        if ( xLateInitSettings->hasByName( _rSettingsGroupName ) )
        {
            xLateInitSettings->replaceByName( _rSettingsGroupName, makeAny( _rSettings ) );
            OSL_ENSURE( false, "SwXMLImport::SetDocumentSpecificSettings: already have settings for this model!" );
        }
        else
            xLateInitSettings->insertByName( _rSettingsGroupName, makeAny( _rSettings ) );
    }
    catch( const Exception& )
    {
        DBG_UNHANDLED_EXCEPTION();
    }
}

void SwXMLImport::initialize(
    const Sequence<Any>& aArguments )
    throw( uno::Exception, uno::RuntimeException)
{
    // delegate to super class
    SvXMLImport::initialize(aArguments);

    // we are only looking for a PropertyValue "PreserveRedlineMode"
    sal_Int32 nLength = aArguments.getLength();
    for(sal_Int32 i = 0; i < nLength; i++)
    {
        beans::PropertyValue aValue;
        if ( aArguments[i] >>= aValue )
        {
            if (aValue.Name.equalsAsciiL(
                RTL_CONSTASCII_STRINGPARAM("PreserveRedlineMode")))
            {
                OSL_VERIFY( aValue.Value >>= bPreserveRedlineMode );
            }
            continue;
        }

        beans::NamedValue aNamedValue;
        if ( aArguments[i] >>= aNamedValue )
        {
            if (aNamedValue.Name.equalsAsciiL(
                RTL_CONSTASCII_STRINGPARAM("LateInitSettings")))
            {
                OSL_VERIFY( aNamedValue.Value >>= xLateInitSettings );
            }
        }
    }
}


//
// UNO component registration helper functions
//

OUString SAL_CALL SwXMLImport_getImplementationName() throw()
{
    return OUString( RTL_CONSTASCII_USTRINGPARAM(
        "com.sun.star.comp.Writer.XMLOasisImporter" ) );
}

uno::Sequence< OUString > SAL_CALL SwXMLImport_getSupportedServiceNames()
    throw()
{
    const OUString aServiceName( SwXMLImport_getImplementationName() );
    const uno::Sequence< OUString > aSeq( &aServiceName, 1 );
    return aSeq;
}

uno::Reference< uno::XInterface > SAL_CALL SwXMLImport_createInstance(
        const uno::Reference< lang::XMultiServiceFactory > & rSMgr)
    throw( uno::Exception )
{
    // #110680#
    // return (cppu::OWeakObject*)new SwXMLImport(IMPORT_ALL);
    return (cppu::OWeakObject*)new SwXMLImport( rSMgr, IMPORT_ALL );
}

OUString SAL_CALL SwXMLImportStyles_getImplementationName() throw()
{
    return OUString( RTL_CONSTASCII_USTRINGPARAM(
        "com.sun.star.comp.Writer.XMLOasisStylesImporter" ) );
}

uno::Sequence< OUString > SAL_CALL SwXMLImportStyles_getSupportedServiceNames()
    throw()
{
    const OUString aServiceName( SwXMLImportStyles_getImplementationName() );
    const uno::Sequence< OUString > aSeq( &aServiceName, 1 );
    return aSeq;
}

uno::Reference< uno::XInterface > SAL_CALL SwXMLImportStyles_createInstance(
        const uno::Reference< lang::XMultiServiceFactory > & rSMgr)
    throw( uno::Exception )
{
    // #110680#
    //return (cppu::OWeakObject*)new SwXMLImport(
    //  IMPORT_STYLES | IMPORT_MASTERSTYLES | IMPORT_AUTOSTYLES |
    //  IMPORT_FONTDECLS );
    return (cppu::OWeakObject*)new SwXMLImport(
        rSMgr,
        IMPORT_STYLES | IMPORT_MASTERSTYLES | IMPORT_AUTOSTYLES |
        IMPORT_FONTDECLS );
}

OUString SAL_CALL SwXMLImportContent_getImplementationName() throw()
{
    return OUString( RTL_CONSTASCII_USTRINGPARAM(
        "com.sun.star.comp.Writer.XMLOasisContentImporter" ) );
}

uno::Sequence< OUString > SAL_CALL SwXMLImportContent_getSupportedServiceNames()
    throw()
{
    const OUString aServiceName( SwXMLImportContent_getImplementationName() );
    const uno::Sequence< OUString > aSeq( &aServiceName, 1 );
    return aSeq;
}

uno::Reference< uno::XInterface > SAL_CALL SwXMLImportContent_createInstance(
        const uno::Reference< lang::XMultiServiceFactory > & rSMgr)
    throw( uno::Exception )
{
    // #110680#
    //return (cppu::OWeakObject*)new SwXMLImport(
    //  IMPORT_AUTOSTYLES | IMPORT_CONTENT | IMPORT_SCRIPTS |
    //  IMPORT_FONTDECLS );
    return (cppu::OWeakObject*)new SwXMLImport(
        rSMgr,
        IMPORT_AUTOSTYLES | IMPORT_CONTENT | IMPORT_SCRIPTS |
        IMPORT_FONTDECLS );
}

OUString SAL_CALL SwXMLImportMeta_getImplementationName() throw()
{
    return OUString( RTL_CONSTASCII_USTRINGPARAM(
        "com.sun.star.comp.Writer.XMLOasisMetaImporter" ) );
}

uno::Sequence< OUString > SAL_CALL SwXMLImportMeta_getSupportedServiceNames()
    throw()
{
    const OUString aServiceName( SwXMLImportMeta_getImplementationName() );
    const uno::Sequence< OUString > aSeq( &aServiceName, 1 );
    return aSeq;
}

uno::Reference< uno::XInterface > SAL_CALL SwXMLImportMeta_createInstance(
        const uno::Reference< lang::XMultiServiceFactory > & rSMgr)
    throw( uno::Exception )
{
    // #110680#
    // return (cppu::OWeakObject*)new SwXMLImport( IMPORT_META );
    return (cppu::OWeakObject*)new SwXMLImport( rSMgr, IMPORT_META );
}

OUString SAL_CALL SwXMLImportSettings_getImplementationName() throw()
{
    return OUString( RTL_CONSTASCII_USTRINGPARAM(
        "com.sun.star.comp.Writer.XMLOasisSettingsImporter" ) );
}

uno::Sequence< OUString > SAL_CALL SwXMLImportSettings_getSupportedServiceNames()
    throw()
{
    const OUString aServiceName( SwXMLImportSettings_getImplementationName() );
    const uno::Sequence< OUString > aSeq( &aServiceName, 1 );
    return aSeq;
}

uno::Reference< uno::XInterface > SAL_CALL SwXMLImportSettings_createInstance(
        const uno::Reference< lang::XMultiServiceFactory > & rSMgr)
    throw( uno::Exception )
{
    // #110680#
    // return (cppu::OWeakObject*)new SwXMLImport( IMPORT_SETTINGS );
    return (cppu::OWeakObject*)new SwXMLImport( rSMgr, IMPORT_SETTINGS );
}


// XServiceInfo
// override empty method from parent class
OUString SAL_CALL SwXMLImport::getImplementationName()
    throw(RuntimeException)
{
    switch( getImportFlags() )
    {
        case IMPORT_ALL:
            return SwXMLImport_getImplementationName();
        case (IMPORT_STYLES|IMPORT_MASTERSTYLES|IMPORT_AUTOSTYLES|IMPORT_FONTDECLS):
            return SwXMLImportStyles_getImplementationName();
        case (IMPORT_AUTOSTYLES|IMPORT_CONTENT|IMPORT_SCRIPTS|IMPORT_FONTDECLS):
            return SwXMLImportContent_getImplementationName();
        case IMPORT_META:
            return SwXMLImportMeta_getImplementationName();
        case IMPORT_SETTINGS:
            return SwXMLImportSettings_getImplementationName();
        default:
            // generic name for 'unknown' cases
            return OUString( RTL_CONSTASCII_USTRINGPARAM(
                "com.sun.star.comp.Writer.SwXMLImport" ) );
    }
}

SwDoc* SwImport::GetDocFromXMLImport( SvXMLImport& rImport )
{
    uno::Reference<lang::XUnoTunnel> xModelTunnel( rImport.GetModel(), uno::UNO_QUERY );
    SwXTextDocument *pTxtDoc = reinterpret_cast< SwXTextDocument *>(
            sal::static_int_cast< sal_IntPtr >(  xModelTunnel->getSomething(SwXTextDocument::getUnoTunnelId() )));
    ASSERT( pTxtDoc, "Where is my model?" )
    ASSERT( pTxtDoc->GetDocShell(), "Where is my shell?" )
    SwDoc* pDoc = pTxtDoc->GetDocShell()->GetDoc();
    ASSERT( pDoc, "Where is my document?" )
    return pDoc;
}


void SwXMLImport::initXForms()
{
    // obtain SwDoc
    Reference<XUnoTunnel> xDocTunnel( GetModel(), UNO_QUERY );
    if( ! xDocTunnel.is() )
        return;
    SwXTextDocument* pXTextDocument = reinterpret_cast<SwXTextDocument*>(
        xDocTunnel->getSomething( SwXTextDocument::getUnoTunnelId() ) );
    if( pXTextDocument == NULL )
        return;

    SwDoc *pDoc = pXTextDocument->GetDocShell()->GetDoc();

    // init XForms (if not already done)
    // (no default model, since we'll load the models)
    if( ! pDoc->isXForms() )
        pDoc->initXForms( false );

    bInititedXForms = sal_True;
}